Adult Prg4+ progenitors repair long-term articular cartilage wounds in vivo.

The identity and origin of the stem/progenitor cells for adult joint cartilage repair remain unknown, impeding therapeutic development. Simulating the common therapeutic modality for cartilage repair in humans, i.e., full-thickness microfracture joint surgery, we combined the mouse full-thickness injury model with lineage tracing and identified a distinct skeletal progenitor cell type enabling long-term (beyond 7 days after injury) articular cartilage repair in vivo. Deriving from a population with active Prg4 expression in adulthood while lacking aggrecan expression, these progenitors proliferate, differentiate to express aggrecan and type II collagen, and predominate in long-term articular cartilage wounds, where they represent the principal repair progenitors in situ under native repair conditions without cellular transplantation. They originate outside the adult bone marrow or superficial zone articular cartilage. These findings have implications for skeletal biology and regenerative medicine for joint injury repair.

Core Muscle Injury: Evaluation and Treatment in the Athlete.

BACKGROUND: Pain in the groin region, where the abdominal musculature attaches to the pubis, is referred to as a "sports hernia,""athletic pubalgia," or "core muscle injury" and has become a topic of increased interest due to its challenging diagnosis. Identifying the cause of chronic groin pain is complicated because significant symptom overlap exists between disorders of the proximal thigh musculature, intra-articular hip pathology, and disorders of the abdominal musculature. PURPOSE: To present a comprehensive review of the pathoanatomic features, history and physical examination, and imaging modalities used to make the diagnosis of core muscle injury. STUDY DESIGN: Narrative and literature review; Level of evidence, 4. METHODS: A comprehensive literature search was performed. Studies involving the diagnosis, treatment, and rehabilitation of athletes with core muscle injury were identified. In addition, the senior author's extensive experience with the care of professional, collegiate, and elite athletes was analyzed and compared with established treatment algorithms. RESULTS: The differential diagnosis of groin pain in the athlete should include core muscle injury with or without adductor longus tendinopathy. Current scientific evidence is lacking in this field; however, consensus regarding terms and treatment algorithms was facilitated with the publication of the Doha agreement in 2015. Pain localized proximal to the inguinal ligament, especially in conjunction with tenderness at the rectus abdominis insertion, is highly suggestive of core muscle injury. Concomitant adductor longus tendinopathy is not uncommon in these athletes and should be investigated. The diagnosis of core muscle injury is a clinical one, although dynamic ultrasonography is becoming increasingly used as a diagnostic modality. Magnetic resonance imaging is not always diagnostic and may underestimate the true extent of a core muscle injury. Functional rehabilitation programs can often return athletes to the same level of play. If an athlete has been diagnosed with athletic pubalgia and has persistent symptoms despite 12 weeks of nonoperative treatment, a surgical repair using mesh and a relaxing myotomy of the conjoined tendon should be considered. The most common intraoperative finding is a deficient posterior wall of the inguinal canal with injury to the distal rectus abdominis. Return to play after surgery for an isolated sports hernia is typically allowed at 4 weeks; however, if an adductor release is performed as well, return to play occurs at 12 weeks. CONCLUSION: Core muscle injury is a diagnosis that requires a high level of clinical suspicion and should be considered in any athlete with pain in the inguinal region. Concurrent adductor pathology is not uncommon.

Single-Stage Revision Anterior Cruciate Ligament Reconstruction Using the Stacked Screws Technique.

Single-stage revision anterior cruciate ligament (ACL) reconstruction is preferable to 2-stage revision, when possible, as it avoids an additional surgery and recovery period. Malpositioned and/or widened bone tunnels are a common cause of ACL reconstruction failure and are challenging to manage in revision reconstructions. The "stacked screws construct" fills the previous malpositioned tunnels and bone voids with an oversized biocomposite screw as graft material. The revised tunnel can then be drilled in an anatomic "primary" location, even partially overlapping the filler screw. This technique simplifies tunnel management in revision ACL reconstruction.

Stacked Biocomposite Screws in a Single-Stage Revision Anterior Cruciate Ligament Reconstruction Has Acceptable Fixation Strength in a Porcine Cadaveric Model.

BACKGROUND: Stacked screws is a commonly used technique in single-stage revision anterior cruciate ligament (ACL) reconstruction in the setting of bone loss, but there are limited data to support its use. HYPOTHESIS: Two configurations of a biocomposite stacked screws construct have similar fixation strength and linear stiffness as a primary ACL reconstruction construct in a biomechanical model. STUDY DESIGN: Controlled laboratory study. METHODS: A total of 30 porcine legs were divided into 3 groups. Group 1 underwent primary ACL reconstruction with a patellar tendon graft fixed into the femur, with an 8-mm biocomposite interference screw of beta-tricalcium phosphate and poly lactide-co-glycolide. For a revision ACL reconstruction model, groups 2 and 3 had bone tunnels created and subsequently filled with 12-mm biocomposite screws. New bone tunnels were drilled through the filler screw and the surrounding bone, and the patellar bone plug was inserted. Group 2 was fixed with 8-mm biocomposite screws on the side of the graft opposite the filler screw, while group 3 had the interference screw interposed between the graft and the filler screw. The construct was loaded at 1.5 mm/s in line with the tunnel until failure. Load to failure, linear stiffness, and mode of failure were recorded. RESULTS: The mean pullout strength for groups 1, 2, and 3 was 626 ± 145 N, 653 ± 152 N, and 720 ± 125 N, respectively (P = .328). The mean linear stiffness of the construct in groups 1, 2, and 3 was 71.4 ± 9.9 N/mm, 84.1 ± 11.1 N/mm, and 82.0 ± 10.8 N/mm, respectively. Group 2 was significantly stiffer than group 1 (P = .037). CONCLUSION: Two configurations of a biocomposite stacked screws construct for a single-stage revision ACL reconstruction in the setting of bone loss show a similar fixation strength and linear stiffness to a primary ACL reconstruction at time zero in a porcine model. CLINICAL RELEVANCE: In the setting of bone loss from tunnel malpositioning, a single-stage revision ACL reconstruction using a stacked screws construct may provide adequate fixation strength and linear stiffness.

Anterior Cruciate Ligament Reconstruction Using Bone-Patellar Tendon-Bone Allograft in Patients Aged 50 and Older Leads to Improved Activity Levels and Acceptable Patient-Reported Outcomes.

PURPOSE: To evaluate patient-reported outcomes in patients aged 50 years and older undergoing anterior cruciate ligament reconstruction (ACLR) using bone-patellar tendon-bone (BPTB) allograft with minimum 2-year follow-up. METHODS: A retrospective review was performed on a consecutive series of patients aged 50 and older who underwent ACLR using BPTB allograft by a single surgeon with minimum 2-year follow-up. Postoperative International Knee Documentation Committee (IKDC), Lysholm, and Physical Component Summary of the 12-item Short-Form Health Survey were used to assess outcomes, as well as preoperative and postoperative Tegner activity scores, which were compared using a paired sample t test. RESULTS: Fifty patients met inclusion criteria, with a mean age of 55.3 ± 4.4 years and mean follow-up of 4.8 ± 1.9 years. Tegner activity scores improved from a mean preoperative score of 3.26 to a mean postoperative score of 5.25 (P < .001). The mean postoperative scores for Lysholm, IKDC, and Physical Component Summary were 87.3, 81.1, and 54.3, respectively. In total, 36 (72%) patients achieved a patient acceptable symptom state score for IKDC and 37 (74%) patients achieved a minimal clinically important difference for Tegner activity score. Thirty-eight (76%) patients reported good-to-excellent results, 6 (12%) patients reported fair results, and 6 (12%) patients reported poor results. CONCLUSIONS: ACLR with BPTB allograft in patients aged 50 and older leads to good patient-reported outcomes with significantly increased postoperative activity status at a minimum 2-year follow-up. LEVEL OF EVIDENCE: Level IV, therapeutic case series.

Patient-Reported Outcomes After Multiple-Revision ACL Reconstruction: Good but Not Great.

PURPOSE: To evaluate the patient-reported and objective functional outcomes of patients undergoing multiple-revision anterior cruciate ligament (ACL) reconstruction surgery. The secondary purpose was to determine failure rates and factors associated with failure, with a focus on posterior tibial slope. METHODS: All patients who underwent a repeat revision ACL reconstruction with a single surgeon over a 13-year period were identified. Chart data were obtained, including radiographic findings, operative details and findings, and postoperative examination findings. Failure was defined as subjective instability with evidence of graft incompetence on physical examination and MRI. Patients completed the International Knee Documentation Committee Subjective Knee Evaluation Form (IKDC-SKF) and Tegner Activity Level Scale. Patients who had outcomes scores completed a minimum of 2 years postoperatively were included. RESULTS: Fourteen patients were available for follow-up; 12 underwent secondary revision procedures, and 2 underwent tertiary revisions. Three patients (21%) had subsequent failure of the revision graft with mean time to failure of 27 months. Posterior tibial slope was significantly higher in the failures than in the nonfailures (13.3˚; 95% CI 10.1-16.6 versus 10.1˚; 95% CI 6.7-11.4; P = 0.049). Eleven patients completed outcomes measures at a mean of 42 months postoperatively (range 24-79 months). The mean Tegner activity score was 6.3 at follow-up, compared with 8.3 prior to the original ACL injury. The mean IKDC-SKF score was 70 at follow-up. CONCLUSION: Multiple revision ACL reconstruction surgery appears to have reasonable functional outcomes but is associated with a relatively high failure rate. Activity level following repeat revision surgery is diminished compared to the preinjury state, but most patients are able to return to recreational sports. LEVEL OF EVIDENCE: Therapeutic Study, Level IV.

Editorial Commentary: Graft Orientation in Anterior Cruciate Ligament Reconstruction-Does It Really Matter?

The search for an isometric, anatomic, biomechanically optimal anterior cruciate ligament (ACL) reconstruction remains elusive. To better approximate the native ACL, surgeons have used a host of different graft options and repair techniques. Surgical techniques involving single-tunnel and double-tunnel (or even triple-tunnel!) fixation sites have been used in an attempt to re-create the "2 (or more) bundles" of the ACL. Transtibial and independent femoral drilling techniques are used in an effort to create a more "anatomic" femoral tunnel placement. Once the anatomic femoral attachment site is identified, there is then a debate on how best to "fill" the attachment site with the surgical graft. These are all important discussions and debates, but one question remains . . . Does any of it really matter?

Biomechanics Following Isolated Posterolateral Corner Reconstruction Comparing a Fibular-Based Docking Technique With a Tibia and Fibular-Based Anatomic Technique Show Either Technique is Acceptable.

PURPOSE: To analyze the biomechanical integrity of 2 posterolateral corner (PLC) reconstruction techniques using a sophisticated robotic biomechanical system that enables analysis of joint kinematics under dynamic external loads. METHODS: Eight cadaveric human knee specimens were tested. Five N·m external torque followed by 5 N·m varus torque was dynamically applied to each specimen. The 6 degrees of freedom kinematics of the joint were measured in 4 states (intact, PLC-deficient, fibular-based docking, and anatomic PLC reconstructed) at 30°, 60°, and 90° of flexion. Tibial external rotation (ER) and varus rotation (VR) were compared. RESULTS: Under external torque, ER significantly increased from the intact state to the PLC-deficient state across all flexion angles. At 30° of flexion, ER was not significantly different between the intact state (19.9°) and fibular-based (18.7°, P = .336) and anatomic reconstructions (14.9°, P = .0977). At 60°, ER was not significantly different between the intact state and fibular-based reconstruction (22.4°, compared with 19.8° in intact; P = .152) but showed overconstraint after anatomic reconstruction (15.7°; P = .0315). At 90°, ER was not significantly different between the intact state and anatomic reconstruction (15.4°, compared with 19.7° in intact; P = .386) but was with the fibular-based technique (23.5°; P = .0125). CONCLUSION: Both a fibular-based docking technique and an anatomic technique for isolated PLC reconstruction provided appropriate constraint through most tested knee range of motion, yet the fibular-based docking technique underconstrained the knee at 90°, and the anatomic reconstruction overconstrained the knee at 60°. Biomechanically, either technique may be considered for surgical treatment of high-grade isolated PLC injuries. CLINICAL RELEVANCE: This biomechanical study utilizing clinically-relevant dynamic forces on the knee shows that either a simplified fibular-based docking technique or a more complex anatomic technique may be considered for surgical treatment of high-grade isolated PLC injuries.

A Wide-Range, Wireless Wearable Inertial Motion Sensing System for Capturing Fast Athletic Biomechanics in Overhead Pitching.

The standard technology used to capture motion for biomechanical analysis in sports has employed marker-based optical systems. While these systems are excellent at providing positional information, they suffer from a limited ability to accurately provide fundamental quantities such as velocity and acceleration (hence forces and torques) during high-speed motion typical of many sports. Conventional optical systems require considerable setup time, can exhibit sensitivity to extraneous light, and generally sample too slowly to accurately capture extreme bursts of athletic activity. In recent years, wireless wearable sensors have begun to penetrate devices used in sports performance assessment, offering potential solutions to these limitations. This article, after determining pressing problems in sports that such sensors could solve and surveying the state-of-the-art in wearable motion capture for sports, presents a wearable dual-range inertial and magnetic sensor platform that we developed to enable an end-to-end investigation of high-level, very wide dynamic-range biomechanical parameters. We tested our system on collegiate and elite baseball pitchers, and have derived and measured metrics to glean insight into performance-relevant motion. As this was, we believe, the first ultra-wide-range wireless multipoint and multimodal inertial and magnetic sensor array to be used on elite baseball pitchers, we trace its development, present some of our results, and discuss limitations in accuracy from factors such as soft-tissue artifacts encountered with extreme motion. In addition, we discuss new metric opportunities brought by our systems that may be relevant for the assessment of micro-trauma in baseball.

Arthroscopic Circumferential Labral Repair for Patients With Multidirectional Instability: A Comparative Outcome Study.

BACKGROUND: Circumferential tears of the glenohumeral labrum are an uncommon injury, comprising 2.4% of all labral lesions. Currently, the clinical outcomes of arthroscopic circumferential labral repair for patients with instability and combined anterior, posterior, and superior labral tears are not well-known. HYPOTHESIS: Patients treated with arthroscopic circumferential shoulder labral repairs will have inferior clinical outcomes and higher failure rates compared with patients who have isolated arthroscopic anterior labral repairs. STUDY DESIGN: Cohort study; Level of evidence, 3. METHODS: A retrospective cohort study was performed to identify patients aged 18 years and older who underwent circumferential arthroscopic stabilization for recurrent instability as compared with an age-matched control group of arthroscopic primary anterior labral repairs. Age at surgery, American Shoulder and Elbow Surgeons (ASES) Standardized Shoulder Assessment Form score, Simple Shoulder Test (SST) score, 12-Item Short Form Health Survey (SF-12) score (mental and physical), and overall patient satisfaction with surgery were assessed for each group. RESULTS: A total of 35 consecutive patients (36 shoulders) who underwent an arthroscopic 360° circumferential labral repair were compared with a matched group of 31 patients who underwent an isolated arthroscopic anterior labral repair. The mean follow-up period was 34.3 and 56.8 months, respectively. No significant difference was found between the 2 groups for overall satisfaction with the surgery or recurrent instability. At the time of the follow-up survey, 22% of the patients experienced pain and 25% of the patients experienced instability in the circumferential repair group, whereas 15% of the patients experienced some level of pain and 30% of patients experienced a subjective sense of subtle instability in the isolated repair group. The ASES scores were 87.3 in the combined labral repair group and 93.3 in the isolated anterior group (P = .35), SST scores were 10.7 and 11.3 (P = .70), SF-12 mental scores were 54.6 and 56.8 (P = .80), SF-12 physical scores were 53.2 and 54.2 (P = .98), and age at time of the surgery was 26.7 and 24.6 years (P = .33), respectively. There was no difference between the 2 groups in pre- and postoperative range of motion (P > .05). CONCLUSION: There was no difference in shoulder stability and function in patients after 360° combined labral repairs versus anterior labral repair alone. With proper patient selection, patients can expect similar outcomes despite the more extensive surgical procedure and complex postoperative rehabilitation protocol for circumferential repairs.

A Prospective, Blinded, Multicenter Clinical Trial to Compare the Efficacy, Accuracy, and Safety of In-Office Diagnostic Arthroscopy With Magnetic Resonance Imaging and Surgical Diagnostic Arthroscopy.

PURPOSE: The purpose of this study was to compare the efficacy, accuracy, and safety of in-office diagnostic arthroscopy with magnetic resonance imaging (MRI) and surgical diagnostic arthroscopy. METHODS: A prospective, blinded, multicenter, clinical trial was performed on 110 patients, ages 18 to 75 years, who presented with knee pain. The study period was April 2012 to April 2013. Each patient underwent a physical examination, an MRI, in-office diagnostic imaging, and a diagnostic arthroscopic examination in the operating room. The attending physician completed clinical report forms comparing the in-office arthroscopic examination and surgical diagnostic arthroscopy findings on each patient. Two blinded experts, unaffiliated with the clinical care of the study's subjects, reviewed the in-office arthroscopic images and MRI images using the surgical diagnostic arthroscopy images as the "control" group comparison. Patients were consecutive, and no patients were excluded from the study. RESULTS: In this study, the accuracy, sensitivity, and specificity of in-office arthroscopy was equivalent to surgical diagnostic arthroscopy and more accurate than MRI. When comparing in-office arthroscopy with surgical diagnostic arthroscopy, all kappa statistics were between 0.766 and 0.902. For MRI compared with surgical diagnostic arthroscopy, kappa values ranged from a low of 0.130 (considered "slight" agreement) to a high of 0.535 (considered "moderate" agreement). The comparison of MRI to in-office arthroscopy showed very similar results as the comparison of MRI with surgical diagnostic arthroscopy, ranging from a low kappa of 0.112 (slight agreement) to a high of 0.546 (moderate agreement). There were no patient-related or device-related complications related to the use of in-office arthroscopy. CONCLUSIONS: Needle-based diagnostic imaging that can be used in the office setting is statistically equivalent to surgical diagnostic arthroscopy with regard to the diagnosis of intra-articular, nonligamentous knee joint pathology. In-office diagnostic imaging can provide a more detailed and accurate diagnostic assessment of intra-articular knee pathology than MRI. Based on the study results, in-office diagnostic imaging provides a safe, accurate, real-time, minimally invasive diagnostic modality to evaluate intra-articular pathology without the need for surgical diagnostic arthroscopy or high-cost imaging. LEVEL OF EVIDENCE: Level II, comparative prospective trial.

An In Vivo Prediction of Anisometry and Strain in Anterior Cruciate Ligament Reconstruction - A Combined Magnetic Resonance and Dual Fluoroscopic Imaging Analysis.

PURPOSE: To evaluate the in vivo anisometry and strain of theoretical anterior cruciate ligament (ACL) grafts in the healthy knee using various socket locations on both the femur and tibia. METHODS: Eighteen healthy knees were imaged using magnetic resonance imaging and dual fluoroscopic imaging techniques during a step-up and sit-to-stand motion. The anisometry of the medial aspect of the lateral femoral condyle was mapped using 144 theoretical socket positions connected to an anteromedial, central, and posterolateral attachment site on the tibia. The 3-dimensional wrapping paths of each theoretical graft were measured. Comparisons were made between the anatomic, over the top (OTT), and most-isometric (isometric) femoral socket locations, as well as between tibial insertions. RESULTS: The area of least anisometry was found in the proximal-distal direction just posterior to the intercondylar notch. The most isometric attachment site was found midway on the Blumensaat line with approximately 2% and 6% strain during the step-up and sit-to-stand motion, respectively. Posterior femoral attachments resulted in decreased graft lengths with increasing flexion angles, whereas anterodistal attachments yielded increased lengths with increasing flexion angles. The anisometry of the anatomic, OTT and isometric grafts varied between tibial insertions (P < .001). The anatomic graft was significantly more anisometric than the OTT and isometric graft at deeper flexion angles (P < .001). CONCLUSIONS: An area of least anisometry was found in the proximal-distal direction just posterior to the intercondylar notch. ACL reconstruction at the isometric and OTT location resulted in nonanatomic graft behavior, which could overconstrain the knee at deeper flexion angles. Tibial location significantly affected graft strains for the anatomic, OTT, and isometric socket location. CLINICAL RELEVANCE: This study improves the knowledge on ACL anisometry and strain and helps surgeons to better understand the consequences of socket positioning during intra-articular ACL reconstruction.

Variability in the Clock Face View Description of Femoral Tunnel Placement in ACL Reconstruction Using MRI-Based Bony Models.

Though controversial, the "clock face view" of the intercondylar notch remains a way some surgeons communicate regarding placement of the femoral tunnel in anterior cruciate ligament reconstruction. The purpose of this study was to quantify the differences in angle measurement between several previous descriptions of the clock face view by using a new reference standard. Three-Tesla magnetic resonance imaging (MRI) was used to scan 10 human knees to create three-dimensional MRI-based bony models which were used for measurements. A standardized clock face view was developed with the knee flexed to 90° using the junction of the cartilage and cortex of the medial and lateral surfaces of medial and lateral femoral condyles as the 3 o'clock and 9 o'clock, respectively, with the 12 o'clock established as the midpoint of the roof of the intercondylar notch. With the knee viewed at 90° of flexion, an "idealized" femoral tunnel position was plotted on the medial wall of the lateral femoral condyle at 30° (corresponding to the 10 o'clock or 2 o'clock position). The clock faces as described by Edwards et al, Heming et al, and Mochizuki et al were each then overlaid on this same model and the difference in measurement calculated. The average angles measured when the previously described clock faces were projected onto the idealized clock face view comparing a mark made at 30° were 47.7°, 7.2°, and 49.8° for the methods described by Edwards et al, Heming et al, and Mochizuki et al, respectively (all p < 0.001). Significant variation exists between angle measurements in simulated femoral tunnel placement based on the varying descriptions of the intercondylar clock face.

Articular cartilage generation applying PEG-LA-DM/PEGDM copolymer hydrogels.

BACKGROUND: Injuries to the human native cartilage tissue are particularly problematic because cartilage has little to no ability to heal or regenerate itself. Employing a tissue engineering strategy that combines suitable cell sources and biomimetic hydrogels could be a promising alternative to achieve cartilage regeneration. However, the weak mechanical properties may be the major drawback to use fully degradable hydrogels. Besides, most of the fully degradable hydrogels degrade too fast to permit enough extracellular matrix (ECM) production for neocartilage formation. In this study, we demonstrated the feasibility of neocartilage regeneration using swine articular chondrocytes photoencapsualted into poly (ethylene glycol) dimethacrylate (PEGDM) copolymer hydrogels composed of different degradation profiles: degradable (PEG-LA-DM) and nondegradable (PEGDM) macromers in molar ratios of 50/50, 60/40, 70/30, 80/20, and 90/10. METHODS: Articular chondrocytes were isolated enzymatically from juvenile Yorkshire swine cartilage. 6 × 10(7) cells cells were added to each milliliter of macromer/photoinitiator (I2959) solution. Nonpolymerized gel containing the cells (100 µL) was placed in cylindrical molds (4.5 mm diameter × 6.5 mm in height). The macromer/photoinitiator/chondrocyte solutions were polymerized using ultraviolet (365 nm) light at 10 mW/cm(2) for 10 mins. Also, an articular cartilaginous ring model was used to examine the capacity of the engineered cartilage to integrate with native cartilage. Samples in the pilot study were collected at 6 weeks. Samples in the long-term experimental groups (60/40 and 70/30) were implanted into nude mice subcutaneously and harvested at 6, 12 and 18 weeks. Additionally, cylindrical constructs that were not implanted used as time zero controls. All of the harvested specimens were examined grossly and analyzed histologically and biochemically. RESULTS: Histologically, the neocartilage formed in the photochemically crosslinked gels resembled native articular cartilage with chondrocytes in lacunae and surrounded by new ECM. Increases in total DNA, glycosaminoglycan, and hydroxyproline were observed over the time periods studied. The neocartilage integrated with existing native cartilage. CONCLUSIONS: Articular cartilage generation was achieved using swine articular chondrocytes photoencapsulated in copolymer PEGDM hydrogels, and the neocartilage tissue had the ability to integrate with existing adjacent native cartilage.

Hyaline Articular Matrix Formed by Dynamic Self-Regenerating Cartilage and Hydrogels.

Injuries to the articular cartilage surface are challenging to repair because cartilage possesses a limited capacity for self-repair. The outcomes of current clinical procedures aimed to address these injuries are inconsistent and unsatisfactory. We have developed a novel method for generating hyaline articular cartilage to improve the outcome of joint surface repair. A suspension of 10(7) swine chondrocytes was cultured under reciprocating motion for 14 days. The resulting dynamic self-regenerating cartilage (dSRC) was placed in a cartilage ring and capped with fibrin and collagen gel. A control group consisted of chondrocytes encapsulated in fibrin gel. Constructs were implanted subcutaneously in nude mice and harvested after 6 weeks. Gross, histological, immunohistochemical, biochemical, and biomechanical analyses were performed. In swine patellar groove, dSRC was implanted into osteochondral defects capped with collagen gel and compared to defects filled with osteochondral plugs, collagen gel, or left empty after 6 weeks. In mice, the fibrin- and collagen-capped dSRC constructs showed enhanced contiguous cartilage matrix formation over the control of cells encapsulated in fibrin gel. Biochemically, the fibrin and collagen gel dSRC groups were statistically improved in glycosaminoglycan and hydroxyproline content compared to the control. There was no statistical difference in the biomechanical data between the dSRC groups and the control. The swine model also showed contiguous cartilage matrix in the dSRC group but not in the collagen gel and empty defects. These data demonstrate the survivability and successful matrix formation of dSRC under the mechanical forces experienced by normal hyaline cartilage in the knee joint. The results from this study demonstrate that dSRC capped with hydrogels successfully engineers contiguous articular cartilage matrix in both nonload-bearing and load-bearing environments.