RESUMO
We study the variation in plasma beta, Alfven Mach number, and magnetosonic Mach number during different geomagnetic storms of solar cycles 23, 24, and 25. In addition, we employ measurements of the solar wind's flow pressure, proton density, interplanetary magnetic field (IMF) along the z-direction (Bz), temperature, velocity, and geomagnetic index SYM-H. Here, the wavelet coherence (WTC) approach of plasma beta, the Alfven Mach number, and the magnetosonic Mach number have been used with the symmetrical H component (SYM-H) index, which are critical indicators of the plasma behavior and magnetic field interactions. A solar CME or, much less severely, a corotating interaction region (CIR), which is formed at the leading edge of a high-speed stream, is the source of the magnetic storm. The key objective of this study is to reveal the possible dependencies of the geomagnetic indices on whether a storm is driven by a CME or CIR. For CIR-associated storms, large amplitude waves occur preferentially with the rising Alfven Mach number and plasma beta. At the same time, the magnetosonic Mach number lacks variability during the storms caused by shock on the arrival of Earth's environment. This is different for CME-driven storms, where the variations of the magnetosonic Mach number do not show much fluctuation compared to the Alfven Mach number and plasma beta. WTC between SYM-H and our derived parameters indicates periodicities between 64 and 512 minutes and noticeable regions of significantly enhanced power on November 07-09, 2004, and June 21-23, 2015. However, the magnetosonic Mach number showed a noticeable coherence with SYM-H between 64 and 250 minutes on September 06-08, 2017. Although, during March 19-21, 2021, both the Alfven Mach number and magnetosonic Mach number showed a noticeable coherence with SYM-H, plasma beta showed none. These parameters can be used in the prediction of geomagnetic storms of the category above G3.
RESUMO
We report on the thermal transport properties of noble metals (gold, silver and copper) under conditions of extremely high electron temperatures (that are on the order of the Fermi energy). We perform parameter-free density functional theory calculations of the electron temperature-dependent electron-phonon coupling, electronic heat capacities, and thermal conductivities to elucidate the strong role played by the excitation of the low lyingd-bands on the transport properties of the noble metals. Our calculations show that, although the three metals have similar electronic band structures, the changes in their electron-phonon coupling at elevated electron temperatures are drastically different; while electron-phonon coupling decreases in gold, it increases in copper and, it remains relatively unperturbed for silver with increasing electron temperatures of up to â¼60 000 K (or 5 eV). We attribute this to the varying contributions from acoustic and longitudinal phonon modes to the electron-phonon coupling in the three metals. Although their electron-phonon coupling changes with electron temperature, the thermal conductivity trends with electron temperature are similar for all three metals. For instance, the thermal conductivities for all three metals reach their maximum values (on par with the room-temperature values of some of the most thermally conductive semiconductors) at electron temperatures of â¼6000 K, and thereafter monotonically decrease due to the enhanced effect of electron-electron scattering for electronic states that are further away from the Fermi energy. As such, only accounting for electron-phonon coupling and neglecting electron-electron scattering can lead to large over-predictions of the thermal conductivities at extremely high electron temperatures. Our results shed light on the microscopic understanding of the electronic scattering mechanisms and thermal transport in noble metals under conditions of extremely high electron temperatures and, as such, are significant for a plethora of applications such as in plasmonic devices that routinely leverage hot electron transport.
RESUMO
We measure the thermal conductivity of solid and molten tungsten using steady state temperature differential radiometry. We demonstrate that the thermal conductivity can be well described by application of Wiedemann-Franz law to electrical resistivity data, thus suggesting the validity of Wiedemann-Franz law to capture the electronic thermal conductivity of metals in their molten phase. We further support this conclusion using ab initio molecular dynamics simulations with a machine-learned potential. Our results show that at these high temperatures, the vibrational contribution to thermal conductivity is negligible compared to the electronic component.
RESUMO
Tailor-made materials featuring large tunability in their thermal transport properties are highly sought-after for diverse applications. However, achieving `user-defined' thermal transport in a single class of material system with tunability across a wide range of thermal conductivity values requires a thorough understanding of the structure-property relationships, which has proven to be challenging. Herein, large-scale computational screening of covalent organic frameworks (COFs) for thermal conductivity is performed, providing a comprehensive understanding of their structure-property relationships by leveraging systematic atomistic simulations of 10,750 COFs with 651 distinct organic linkers. Through the data-driven approach, it is shown that by strategic modulation of their chemical and structural features, the thermal conductivity can be tuned from ultralow (≈0.02 W m-1 K-1) to exceptionally high (≈50 W m-1 K-1) values. It is revealed that achieving high thermal conductivity in COFs requires their assembly through carbon-carbon linkages with densities greater than 500 kg m-3, nominal void fractions (in the range of ≈0.6-0.9) and highly aligned polymeric chains along the heat flow direction. Following these criteria, it is shown that these flexible polymeric materials can possess exceptionally high thermal conductivities, on par with several fully dense inorganic materials. As such, the work reveals that COFs mark a new regime of materials design that combines high thermal conductivities with low densities.
RESUMO
The ability to dynamically and reversibly control thermal transport in solid-state systems can redefine and propel a plethora of technologies including thermal switches, diodes, and rectifiers. Current material systems, however, do not possess the swift and large changes in thermal conductivity required for such practical applications. For instance, stimuli responsive materials, that can reversibly switch between a high thermal conductivity state and a low thermal conductivity state, are mostly limited to thermal switching ratios in the range of 1.5 to 4. Here, we demonstrate reversible thermal conductivity switching with an unprecedented 18× change in thermal transport in a highly flexible covalent organic framework with revolving imine bonds. The pedal motion of the imine bonds is capable of reversible transformations of the framework from an expanded (low thermal conductivity) to a contracted (high thermal conductivity) phase, which can be triggered through external stimuli such as exposure to guest adsorption and desorption or mechanical strain. We also show that the dynamic imine linkages endow the material with a negative Poisson's ratio, thus marking a regime of materials design that combines low densities with exceptional thermal and mechanical properties.
RESUMO
Covalent-organic frameworks (COFs) are a highly promising class of materials that can provide an excellent platform for thermal management applications. In this Perspective, we first review previous works on the thermal conductivities of COFs. Then we share our insights on achieving high, low, and switchable thermal conductivities of future COFs. To obtain the desired thermal conductivity, a comprehensive understanding of their thermal transport mechanisms is necessary but lacking. We discuss current limitations in atomistic simulations, synthesis, and thermal conductivity measurements of COFs and share potential pathways to overcoming these challenges. We hope to stimulate collective, interdisciplinary efforts to study the thermal conductivity of COFs and enable their wide range of thermal applications.
RESUMO
The coupled interactions among the fundamental carriers of charge, heat, and electromagnetic fields at interfaces and boundaries give rise to energetic processes that enable a wide array of technologies. The energy transduction among these coupled carriers results in thermal dissipation at these surfaces, often quantified by the thermal boundary resistance, thus driving the functionalities of the modern nanotechnologies that are continuing to provide transformational benefits in computing, communication, health care, clean energy, power recycling, sensing, and manufacturing, to name a few. It is the purpose of this Review to summarize recent works that have been reported on ultrafast and nanoscale energy transduction and heat transfer mechanisms across interfaces when different thermal carriers couple near or across interfaces. We review coupled heat transfer mechanisms at interfaces of solids, liquids, gasses, and plasmas that drive the resulting interfacial heat transfer and temperature gradients due to energy and momentum coupling among various combinations of electrons, vibrons, photons, polaritons (plasmon polaritons and phonon polaritons), and molecules. These interfacial thermal transport processes with coupled energy carriers involve relatively recent research, and thus, several opportunities exist to further develop these nascent fields, which we comment on throughout the course of this Review.
RESUMO
Resulting from their remarkable structure-property relationships, metal halide perovskites have garnered tremendous attention in recent years for a plethora of applications. For instance, their ultralow thermal conductivities make them promising candidates for thermoelectric and thermal barrier coating applications. It is widely accepted that the "guest" cations inside the metal halide framework act as "rattlers", which gives rise to strong intrinsic phonon resistances, thus explaining the structure-property relationship dictating their ultralow thermal conductivities. In contrast, through systematic atomistic simulations, we show that this conventionally accepted "rattling" behavior is not the mechanism dictating the ultralow thermal conductivities in metal halide perovskites. Instead, we show that the ultralow thermal conductivities in these materials mainly originate from the strongly anharmonic and mechanically soft metal halide framework. By comparing the thermal transport properties of the prototypical fully inorganic CsPbI3 and an empty PbI6 framework, we show that the addition of Cs+ ions inside the nanocages leads to an enhancement in thermal conductivity through vibrational hardening of the framework. Our extensive spectral energy density calculations show that the Cs+ ions have well-defined phase relations with the lattice dynamics of the "host" framework resulting in additional pathways for heat conduction, which is in disagreement with the description of the individual "rattling" of guests inside the framework that has been widely assumed to dictate their ultralow thermal conductivities. Furthermore, we show that an efficient strategy to control the heat transfer efficacy in these materials is through the manipulation of the framework anharmonicity achieved via strain and octahedral tilting. Our work provides the fundamental insights into the lattice dynamics that dictate heat transfer in these novel materials, which will ultimately help guide their further advancement in the next-generation of electronics such as in thermoelectric and photovoltaic applications.
RESUMO
The understanding of the fundamental relationships between chemical bonding and material properties, especially for carbon allotropes with diverse orbital hybridizations, is significant from both scientific and applicative standpoints. Here, we elucidate the influence of the intermolecular covalent bond configuration on the mechanical and thermal properties of polymerized fullerenes by performing systematic atomistic simulations on graphullerite, a newly synthesized crystalline polymer of C60 with a hexagonal lattice similar to that of graphene. Specifically, we show that the polymerization of C60 molecules into two-dimensional sheets (and three-dimensional layered structures) offers tunable control over their mechanical and thermal properties via the replacement of weak intermolecular van der Waals interactions between the fullerene molecules with strong sp3 covalent bonds. More specifically, we show that graphullerite possesses highly anisotropic mechanical as well as thermal properties resulting from the variation in the chemical bonding configuration along the different directions. In terms of their mechanical properties, we find that graphullerite can be remarkably ductile if strained along a certain direction with oriented double bonds connecting the fullerenes. Combined with their drastically reduced Young's modulus and bulk modulus as compared to graphite, these materials have the potential to be utilized in flexible electronics and advanced battery electrode applications. In terms of their thermal properties, we show that the bonding orientation dictates the intrinsic phonon scattering mechanisms, which ultimately dictates their anisotropic temperature-dependent thermal conductivities. Taken together, their flexible nature combined with their remarkably high thermal conductivities as polymeric materials positions them as ideal candidates for a plethora of applications such as for the next generation of battery electrodes.
RESUMO
The two natural allotropes of carbon, diamond and graphite, are extended networks of sp3-hybridized and sp2-hybridized atoms, respectively1. By mixing different hybridizations and geometries of carbon, one could conceptually construct countless synthetic allotropes. Here we introduce graphullerene, a two-dimensional crystalline polymer of C60 that bridges the gulf between molecular and extended carbon materials. Its constituent fullerene subunits arrange hexagonally in a covalently interconnected molecular sheet. We report charge-neutral, purely carbon-based macroscopic crystals that are large enough to be mechanically exfoliated to produce molecularly thin flakes with clean interfaces-a critical requirement for the creation of heterostructures and optoelectronic devices2. The synthesis entails growing single crystals of layered polymeric (Mg4C60)∞ by chemical vapour transport and subsequently removing the magnesium with dilute acid. We explore the thermal conductivity of this material and find it to be much higher than that of molecular C60, which is a consequence of the in-plane covalent bonding. Furthermore, imaging few-layer graphullerene flakes using transmission electron microscopy and near-field nano-photoluminescence spectroscopy reveals the existence of moiré-like superlattices3. More broadly, the synthesis of extended carbon structures by polymerization of molecular precursors charts a clear path to the systematic design of materials for the construction of two-dimensional heterostructures with tunable optoelectronic properties.
RESUMO
We experimentally show that the ballistic length of hot electrons in laser-heated gold films can exceed â¼150 nm, which is â¼50% greater than the previously reported value of 100 nm inferred from pump-probe experiments. We also find that the mean free path of electrons at the peak temperature following interband excitation can reach upward of â¼45 nm, which is higher than the average value of 30 nm predicted from our parameter-free density functional perturbation theory. Our first-principles calculations of electron-phonon coupling reveal that the increase in the mean free path due to interband excitation is a consequence of drastically reduced electron-phonon coupling from lattice stiffening, thus providing the microscopic understanding of our experimental findings.
RESUMO
Extreme pressure conditions reveal fundamental insights into the physical properties of elemental metals that are otherwise not evident under ambient conditions. Herein, we use the density functional perturbation theory to demonstrate that the change in thermal conductivity as a result of large hydrostatic pressures at room temperature for aluminum is the largest of any known material. More specifically, in comparison to ambient conditions, we find that the change in thermal conductivity for aluminum is greater than the relative changes in thermal conductivities of diamond and cubic boron nitride combined, which are two of the most thermally conductive bulk materials known to date. We attribute this to the relatively larger increase in mean free paths and lifetimes of electrons in aluminum as a result of weaker electron-phonon coupling at higher pressures. Our work reveals direct insights into the exceptional electronic transport properties of pressurized aluminum and advances a broad paradigm for understanding thermal transport in metals under extreme pressure.
RESUMO
Hydrogen-bonded organic frameworks (HOFs) are a class of nanoporous crystalline materials formed by the assembly of organic building blocks that are held together by a network of hydrogen-bonding interactions. Herein, we show that the dynamic and responsive nature of these hydrogen-bonding interactions endows HOFs with a host of unique physical properties that combine ultraflexibility, high thermal conductivities, and the ability to "self-heal". Our systematic atomistic simulations reveal that their unique mechanical properties arise from the ability of the hydrogen-bond arrays to absorb and dissipate energy during deformation. Moreover, we also show that these materials demonstrate relatively high thermal conductivities for porous crystals with low mass densities due to their extended periodic framework structure that is comprised of light atoms. Our results reveal that HOFs mark a new regime of material design combining multifunctional properties that make them ideal candidates for gas storage and separation, flexible electronics, and thermal switching applications.
RESUMO
Proper thermal management of solar cells based on metal halide perovskites (MHPs) is key to increasing their efficiency as well as their durability. Although two-dimensional (2D) MHPs possess enhanced thermal stability as compared to their three-dimensional (3D) counterparts, the lack of comprehensive knowledge of the heat transfer mechanisms dictating their ultralow thermal conductivities is a bottleneck for further improvements in their thermal performance. Here, we experimentally and computationally study the Dion-Jacobson (DJ) and Ruddlesden-Popper (RP) phases of MHPs (n = 1) to demonstrate that the length of the organic spacers has a negligible influence on their thermal transport properties; we experimentally measure thermal conductivities of 0.19 ± 0.03 W m-1 K-1 and 0.18 ± 0.03 W m-1 K-1 for the RP and DJ phases with 13.6 Å and 6.3 Å interlayer inorganic separations, respectively. In contrast, we show that thermal conductivity is mainly dependent on the separation between the adjacent organic cations. Decreasing the intermolecular distance (by up to 40%) leads to drastically enhanced overall heat conduction (with monotonically increasing thermal conductivity by more than threefold) which is mainly driven by the vibrational hardening of the organic spacers. Although these 2D layered materials constitute a high density of hybrid organic-inorganic interfaces, our results also show that a substantial portion of heat is conducted through coherent phonon transport and that the thermal conductivity of these materials is not solely limited by incoherent interfacial scattering.
RESUMO
Two-dimensional covalent organic frameworks (2D COFs) are a class of modular polymeric crystals with high porosities and large surface areas, which position them as ideal candidates for applications in gas storage and separation technologies. In this work, we study the influence of pore geometry on the anisotropic heat transfer mechanisms in 2D COFs through systematic atomistic simulations. More specifically, by studying COFs with varying pore sizes and gas densities, we demonstrate that the cross-plane thermal conductivity along the direction of the laminar pores can either be decreased due to solid-gas scattering (for COFs with relatively smaller pores that are â²2 nm) or increased due to additional heat transfer pathways introduced by the gas adsorbates (for COFs with relatively larger pores). Our simulations on COF/methane systems reveal the intricate relationship among gas diffusivities, pore geometries, and solid-gas interactions dictating the modular thermal conductivities in these materials. Along with the understanding of the fundamental nature of gas diffusion and heat conduction in the porous framework crystals, our results can also help guide the design of efficient 2D polymeric crystals for applications with improved gas storage, catalysis, and separation capabilities.
RESUMO
The design of innovative porous crystals with high porosities and large surface areas has garnered a great deal of attention over the past few decades due to their remarkable potential for a variety of applications. However, heat dissipation is key to realizing their potential. We use systematic atomistic simulations to reveal that interpenetrated porous crystals formed from two-dimensional (2D) frameworks possess remarkable thermal conductivities at high porosities in comparison to their three-dimensional (3D) single framework and interpenetrated 3D framework counterparts. In contrast to conventional understanding, higher thermal conductivities are associated with lower atomic densities and higher porosities for porous crystals formed from interpenetrating 2D frameworks. We attribute this to lower phonon-phonon scattering and vibrational hardening from the supramolecular interactions that restrict atomic vibrational amplitudes, facilitating heat conduction. This marks a new regime of materials design combining ultralow mass densities and ultrahigh thermal conductivities in 2D interpenetrated porous crystals.
RESUMO
We experimentally and theoretically investigate the thermal conductivity and mechanical properties of polycrystalline HKUST-1 metal-organic frameworks (MOFs) infiltrated with three guest molecules: tetracyanoquinodimethane (TCNQ), 2,3,5,6-tetrafluoro-7,7,8,8-tetracyanoquinodimethane (F4-TCNQ), and (cyclohexane-1,4-diylidene)dimalononitrile (H4-TCNQ). This allows for modification of the interaction strength between the guest and host, presenting an opportunity to study the fundamental atomic scale mechanisms of how guest molecules impact the thermal conductivity of large unit cell porous crystals. The thermal conductivities of the guest@MOF systems decrease significantly, by on average a factor of 4, for all infiltrated samples as compared to the uninfiltrated, pristine HKUST-1. This reduction in thermal conductivity goes in tandem with an increase in density of 38% and corresponding increase in heat capacity of â¼48%, defying conventional effective medium scaling of thermal properties of porous materials. We explore the origin of this reduction by experimentally investigating the guest molecules' effects on the mechanical properties of the MOF and performing atomistic simulations to elucidate the roles of the mass and bonding environments on thermal conductivity. The reduction in thermal conductivity can be ascribed to an increase in vibrational scattering introduced by extrinsic guest-MOF collisions as well as guest molecule-induced modifications to the intrinsic vibrational structure of the MOF in the form of hybridization of low frequency modes that is concomitant with an enhanced population of localized modes. The concentration of localized modes and resulting reduction in thermal conductivity do not seem to be significantly affected by the mass or bonding strength of the guest species.
RESUMO
The prospect of combining two-dimensional materials in vertical stacks has created a new paradigm for materials scientists and engineers. Herein, we show that stacks of two-dimensional covalent organic frameworks are endowed with a host of unique physical properties that combine low densities, high thermal conductivities, and highly negative Poisson's ratios. Our systematic atomistic simulations demonstrate that the tunable mechanical and thermal properties arise from their singular layered architecture comprising strongly bonded light atoms and periodic laminar pores. For example, the negative Poisson's ratio arises from the weak van der Waals interactions between the two-dimensional layers along with the strong covalent bonds that act as hinges along the layers, which facilitate the twisting and swiveling motion of the phenyl rings relative to the tensile plane. The mechanical and thermal properties of two-dimensional covalent organic frameworks can be tailored through structural modularities such as control over the pore size and/or interlayer separation. We reveal that these materials mark a regime of materials design that combines low densities with high thermal conductivities arising from their nanoporous yet covalently interconnected structure.
RESUMO
The complete understanding of the mechanical and thermal responses to strain in hybrid organic-inorganic perovskites holds great potential for their proper functionalities in a range of applications, such as in photovoltaics, thermoelectrics, and flexible electronics. In this work, we conduct systematic atomistic simulations on methyl ammonium lead iodide, which is the prototypical hybrid inorganic-organic perovskite, to investigate the changes in their mechanical and thermal transport responses under uniaxial strain. We find that the mechanical response and the deformation mechanisms are highly dependent on the direction of the applied uniaxial strain with a characteristic ductile- or brittle-like failure accompanying uniaxial tension. Moreover, while most materials shrink in the two lateral directions when stretched, we find that the ductile behavior in hybrid perovskites can lead to a very unique mechanical response where negligible strain occurs along one lateral direction while the length contraction occurs in the other direction due to uniaxial tension. This anisotropy in the mechanical response is also shown to manifest in an anisotropic thermal response of the hybrid perovskite where the anisotropy in thermal conductivity increases by up to 30% compared to the unstrained case before plastic deformation occurs at higher strain levels. Along with the anisotropic responses of these physical properties, we find that uniaxial tension leads to ultralow thermal conductivities that are well below the value predicted with a minimum thermal conductivity model, which highlights the potential of strain engineering to tune the physical properties of hybrid organic-inorganic perovskites.
RESUMO
Two-dimensional covalent organic frameworks (2D COFs) are a novel class of materials that are ideal for gas storage and separation technologies due to their high porosities and large surface areas. In this work we study the heat transfer mechanisms in 2D COFs with the addition of gas adsorbates, demonstrating the remarkably tunable anisotropic response of the phonon thermal conductivity in 2D COFs during gas adsorption. More specifically, our results from atomistic simulations on COF-5/methane systems show that, as the gas density increases, the cross-plane thermal conductivity along the direction of the laminar pores increases, whereas the in-plane thermal conductivity along the 2D sheets is monotonically decreased. We show that a large portion of heat is conducted along the laminar pore channels by the gas molecules colliding with the solid framework and is directly related to the gas diffusivities.