Drying characteristics of thin layer of potato (Solanum tuberosum): experimental and computational studies.

Solar drying is a renewable energy-based technique which is widely used for food preservation purpose. In this study, various drying characteristics of the solar-dried Solanum tuberosum samples of different thicknesses have been investigated at variable climate condition of Lucknow. A mathematical model has also been developed to validate experimental results to predict the drying rate, free moisture content, and other parameters. Pre-treatment of the food samples was also done before the experimental runs on the fabricated solar dryer. Global radiation has also been monitored during the study to correlate the heat transfer rate in inner and outer sides of the solar drying chamber. SEM analysis has also been done to analyze the surface morphology of solar-dried samples. All solar dried food samples have uniformly heated. There was no hot-spot condition present on the surface of the samples. The drying efficiency and payback period of the fabricated solar dryer have also been calculated as 22.9% and 1.42 years, respectively. Model data have been found in good agreement with the experimental data within a 5% error. This modified model can be used for different agro-based food materials such as carrot, kiwifruit, and yam.

A critical review on biochar-based catalysts for the abatement of toxic pollutants from water via advanced oxidation processes (AOPs).

Proper waste disposal is a key towards sustainable development. Wastewater treatment is delineated by the application of efficient, economic and novel catalysts. Biochar is derived from the thermochemical conversion of biomass or any carbonaceous materials and is considered as one of the most eco-friendly substitute for activated carbon. Owing to its large surface area, porosity, crystallinity and active functional groups, the biochar-based catalysts has been extensively applied for the abatement of toxic pollutants from wastewater streams. While most of the reviews focus on the adsorptive properties of the biochar, this review critically analyses the recent development of biochar-based catalysts in the field of advanced oxidation processes (Fenton-like systems, photocatalytic and sonocatalytic systems). The presence of persistent free radicals and oxygen-containing functional groups renders biochar to act as catalyst. The mechanisms accompanying catalytic performance of biochar-based catalysts have also been reviewed. However, the research in this area is quite at an initial phase, and many advancements schemes are essential prior to scale-up and commercialization. Future researches should be devoted to more efficient and rigorous understanding of the structural properties of biochar to engineer the catalytic degradation of targeted pollutants in wastewater treatment.

Biochar for remediation of agrochemicals and synthetic organic dyes from environmental samples: A review.

Application of agrochemicals in farming sector to control insects and pests; and use of synthetic organic dyes to color the products are increasing continuously due to the rapid growth of industries. During the application process many industries releases toxic agrochemicals and dyes in to the aquatic environment and on land without the proper treatment. Due to their toxicity the disposal of such chemicals is of utmost importance. Biochar offers the ability to remediate these substances from environmental matrices because of their high sorption ability of pollutants from water and soil. This review highlights the development and advancement of biochar-based treatment for abatement of agrochemicals and synthetic organic dyes, involving its technical aspects and the variables connected with removing these kinds of pollutants. Several optimization parameters like temperature, pH, chemical concentration, biochar properties, time, and co-existing ions have been elaborated. Literature survey shows that most of the researches on biochar application have been conducted in the batch mode. Hence there is an urgent need to apply this beneficial technique for the remediation of pollutants at the larger scale in the real water and soil samples. A comprehensive summary on sorption kinetics and adsorption isotherms with regards to pollutant removal is also presented. This review also covers the cost analysis of various techniques where biochar has been used as an adsorbent. Thus this review makes an easy roadmap for the further development in biochar and biochar based composites and expansion of these demanding areas of research in biochar and their applications.

The molecular mechanism of vernalization in Arabidopsis and cereals: role of Flowering Locus C and its homologs.

Winter varieties of plants can flower only after exposure to prolonged cold. This phenomenon is known as vernalization and has been widely studied in the model plant Arabidopsis thaliana as well as in monocots. Through the repression of floral activator genes, vernalization prevents flowering in winter. In Arabidopsis, FLOWERING LOCUS C or FLC is the key repressor during vernalization, while in monocots vernalization is regulated through VRN1, VRN2 and VRN3 (or FLOWERING LOCUS T). Interestingly, VRN genes are not homologous to FLC but FLC homologs are found to have a significant role in vernalization response in cereals. The presence of FLC homologs in monocots opens new dimensions to understand, compare and retrace the evolution of vernalization pathways between monocots and dicots. In this review, we discuss the molecular mechanism of vernalization-induced flowering along with epigenetic regulations in Arabidopsis and temperate cereals. A better understanding of cold-induced flowering will be helpful in crop breeding strategies to modify the vernalization requirement of economically important temperate cereals.

Performance evaluation of a continuous packed bed bioreactor: Bio-kinetics and external mass transfer study.

The biodegradation of naphthalene using low-density polyethylene (LDPE) immobilized Exiguobacterium sp. RKS3 (MG696729) in a packed bed bioreactor (PBBR) was studied. The performance of a continuous PBBR was evaluated at different inlet flow rates (IFRs) (20-100 mL/h) under 64 days of operation. The maximum naphthalene removal efficiency (RE) was found at low IFR, and it further decreased with increasing IFRs. In a continuous PBBR, the external mass transfer (EMT) aspect was analysed at various IFRs, and experimental data were interrelated between Colburn factor (JD) and Reynolds number (NRe) as [Formula: see text] . A new correlation [Formula: see text] was obtained to predict the EMT aspect of naphthalene biodegradation. Andrew-Haldane model was used to evaluate the bio-kinetic parameters of naphthalene degradation, and kinetic constant νmax, Js, and Ji were found as 0.386 per day, 13.6 mg/L, and 20.54 mg/L, respectively.

Biodegradation of Congo red dye in a moving bed biofilm reactor: Performance evaluation and kinetic modeling.

The biodegradation of Congo red dye was performed using polyurethane foam-polypropylene immobilized Bacillus sp. MH587030.1 in a moving bed biofilm reactor (MBBR). The central composite design (CCD) based response surface methodology (RSM) was used to optimize the process parameters; pH, Congo red concentration, and media filling ratio, and optimum conditions were observed to be 7.0, 50 mg/L, and 45%, respectively in batch MBBR. At optimum condition, MBBR was operated in continuous mode at different flow rates (25-100 mL/h) over a period of 564 h. The maximum removal efficiency (RE) and elimination capacity (EC) were obtained as 95.7% and 57.6 mg/L·day, respectively under steady-state. The kinetics of Congo red biodegradation at various flow rates were evaluated by a modified Stover-Kincannon model, and kinetic constants; KB and Umax were found to be 0.253 g/L·day and 0.263 g/L·day, respectively.

A novel comparative study of modified carriers in moving bed biofilm reactor for the treatment of wastewater: Process optimization and kinetic study.

In this work, modified plastic carriers; polypropylene (PP), low-density polyethylene- polypropylene (LDPE-PP), and polyurethane foam-polypropylene (PUF-PP) were developed and used in moving bed bioreactor (MBBR) for the wastewater treatment containing naphthalene. To optimized the process parameters using response surface methodology (RSM), two numerical variables; pH (5.0-9.0) and hydraulic retention time (HRT) (1.0-5.0 day) along with the type of carriers (PP, LDPE-PP, and PUF-PP) were selected as a categorical factor. At 7.0 pH and 5 days HRT, maximum removal efficiencies were observed to be 72.4, 84.4, and 90.2% for MBBR packed with PP, LDPE-PP, and PUF-PP carriers, respectively. Gas chromatography-mass spectrometry (GC-MS) analysis reveals catechol and 2-naphthol were observed as intermediate metabolites for naphthalene degradation. Modified Stover-Kincannon model was applied for biodegradation kinetic and constants were observed as Umax: 0.476, 0.666, and 0.769 g/L.day and KB: 0.565, 0.755, and 0.874 g/L.day for PP, LDPE-PP, PUF-PP, respectively.

Recent advancements in bioremediation of dye: Current status and challenges.

The rampant industrialization and unchecked growth of modern textile production facilities coupled with the lack of proper treatment facilities have proliferated the discharge of effluents enriched with toxic, baleful, and carcinogenic pollutants including dyes, heavy metals, volatile organic compounds, odorants, and other hazardous materials. Therefore, the development of cost-effective and efficient control measures against such pollution is imperative to safeguard ecosystems and natural resources. In this regard, recent advances in biotechnology and microbiology have propelled bioremediation as a prospective alternative to traditional treatment methods. This review was organized to address bioremediation as a practical option for the treatment of dyes by evaluating its performance and typical attributes. It further highlights the current hurdles and future prospects for the abatement of dyes via biotechnology-based remediation techniques.

Engineered/designer biochar for the removal of phosphate in water and wastewater.

During the past decade, biochar has attracted immense scientific interest for agricultural and environmental applications. A broad range of biochars with advantageous properties (e.g., high surface area, flexible architecture, and high porosity) has been developed for pollution abatement. Nevertheless, biochar suffers from certain drawbacks (e.g., limited sorption capacity for anions and poor mechanical properties) that limit their practical applicability. This review focuses on recent advancements in biochar technology, especially with respect to its technical aspects, the variables associated with removing phosphates from water, and the challenges for such abatement. The attention paid to the specific remediation of phosphate from water using biochar is limited (n=1114 - Scopus) compared to the application of biochar to other common water pollutants (n=3998 - Scopus). The subject warrants immediate rigorous research because of the undesirable effects of excess phosphate in water bodies. This review will thus facilitate the construction of a roadmap for further developments and the expansion of this challenging area of research.