Challenges and future perspectives for the European grading of pig carcasses - A quality view.

This study sought to evaluate pig carcass grading, describing the existing approaches and definitions, and highlighting the vision for overall quality grading. In particular, the current state of pig carcass grading in the European Union (SEUROP system), its weaknesses, and the challenges to achieve more uniformity and harmonization across member states were described, and a broader understanding of pig carcass value, which includes a vision for the inclusion of meat quality aspects in the grading, was discussed. Finally, the noninvasive methods for the on-line evaluation of pig carcass and meat quality (hereafter referred to as pork quality), and the conditions for their application were discussed. As the way pigs are raised (especially in terms of animal welfare and environmental impact), and more importantly, their perception of pork quality, is becoming increasingly important to consumers, the ideal grading of pigs should comprise pork quality aspects. As a result, a forward-looking "overall quality" approach to pork grading was proposed herein, in which grading systems would be based on the shared vision for pork quality (carcass and meat quality) among stakeholders in the pig industry and driven by consumer expectations with respect to the product. Emerging new technologies provide the technical foundation for such perspective; however, integrating all knowledge and technologies for their practical application to an "overall quality" grading approach is a major challenge. Nonetheless, such approach aligns with the recent vision of Industry 5.0, i.e. a model for the next level of industrialization that is human-centric, resilient, and sustainable.

The effect of immunocastration of male and female Duroc pigs on the morphological, mechanical and compositional characteristics of pork belly.

Pork belly is an important and heterogeneous cut, characterized by its fat content. Immunocastration is an alternative to surgical castration that can modify the composition of carcasses and cuts and it can affect at its processing. This work compares the morphological, mechanical and compositional characteristics of pork belly of (1) pure Duroc pigs from surgically castrated males (CM), entire females (EF) and immunocastrated females (IF), and (2) Duroc crossbreed pigs from immunocastrated males (IM) and entire males (EM). Two trials were carried out: Trial 1, in which 36 bellies were evaluated, 12 from each sexual type, CM, EF and IF; and Trial 2, where 30 bellies were used, 15 from each sexual type, IM and EM. Results show few differences in bellies from EF and IF, while those from CM were fatter and firmer and with lower polyunsaturated fat. Bellies from IM were longer and firmer than those from EM, and their skin was thinner. IM bellies had higher saturated and lower polyunsaturated fat than those from EM. To conclude, the sex of the pigs affects belly characteristics and this could be a criterion for determining the destination of the bellies in the cutting plant. Immunocastration of pure Duroc females had a lower effect on the belly characteristics when compared to those from entire females, but some differences could be found in the fat distribution. Immunocastration of Duroc crossbred males produces firmer and thicker bellies, with a thinner skin, that could be advantageous for slicing and further processing.

A matter of body weight and sex type: Pig carcass chemical composition and pork quality.

This study compares minced carcass chemical composition and meat quality of castrated (CM), immunocastrated (IM) and entire male (EM), and female (FE) pigs at 70, 100 and 120 kg target body weights (TBW) (n = 80; 20 per sex). Sex affected fat, protein, and moisture content of the minced carcasses. Carcass fatty acid (FA) composition was affected by sex, with higher saturated and monounsaturated FA content in CM than in FE, IM and EM, and higher polyunsaturated FA in CM than in EM, with FE and IM in between. Except for intramuscular fat, which was higher in CM than in FE and EM, no significant differences between sexes were found in meat quality. TBW affected carcass chemical composition and some meat quality traits. An interaction between sex and TBW was found with IM approaching EM or CM depending on TBW.

Productive performance and in vivo body composition across the growing and finishing period and carcass traits in pigs of four sex types.

This study compares performance, body and carcass composition among castrated (CM), immunocastrated (IM) and entire males (EM), and females (FE) at 30, 70, 100 and 120 kg of body weight (total of n = 92; 20-24/sex type). Overall, IM had similar growth and feed intake to CM and greater than EM and FE. At each slaughter stage, IM had a lower killing-out percentage than CM and FE, in line with their heavier liver and kidneys. Flare fat proportion and backfat thickness on the ham and at the last rib level were similar for IM, EM and FE, and these were lower than CM. In EM and FE, backfat between the 3rd and 4th last ribs was lower and carcass lean content was higher than in CM, whereas IM were intermediate and not different to the other sexes. Females showed the largest ham proportion, this cut being leaner and less fatty than in CM. Belly proportion was higher in CM than in EM.

Understanding consumers' perceptions towards Iberian pig production and animal welfare.

The Spanish market offers a greater variety of Iberian pork products. The aim of this paper is to determine the perception of consumers of several aspects of Iberian pig production and animal welfare depending on the consumers' characteristics. Consumers from two Spanish regions (n = 403) answered a questionnaire about their beliefs and the importance of pig production, their purchase intentions and their willingness to pay. Consumers were segmented according to their level of knowledge about Iberian pig production. The results of this work indicate that consumers have poor knowledge about Iberian pig production. Even so, consumers show a remarkable preference for Iberian products, especially when the animals are reared freely and in natural conditions, giving great importance to animal welfare. Consumer preferences indicate the importance of emphasizing Iberian traditional pig product characteristics on the label to promote their purchase choices.

Automatic ham classification method based on support vector machine model increases accuracy and benefits compared to manual classification.

The thickness of the subcutaneous fat (SFT) is a very important parameter in the ham, since determines the process the ham will be submitted. This study compares two methods to predict the SFT in slaughter line: an automatic system using an SVM model (Support Vector Machine) and a manual measurement of the fat carried out by an experienced operator, in terms of accuracy and economic benefit. These two methods were compared to the golden standard obtained by measuring SFT with a ruler in a sample of 400 hams equally distributed within each SFT class. The results show that the SFT prediction made by the SVM model achieves an accuracy of 75.3%, which represents an improvement of 5.5% compared to the manual measurement. Regarding economic benefits, SVM model can increase them between 12 and 17%. It can be concluded that the classification using SVM is more accurate than the one performed manually with an increase of the economic benefit for sorting.

Effect of Environmental Enrichment and Herbal Compounds-Supplemented Diet on Pig Carcass, Meat Quality Traits, and Consumers' Acceptability and Preference.

Animal welfare can be considered an ethical attribute of product quality, but consumers should appreciate its added value. The aim of this study was to evaluate consumer's acceptability, preference, and the meat and carcass quality of pigs reared with two stress-reducing strategies: supplementation of an herbal compound (HC) containing Valeriana officinalis and Passiflora incarnata, and environmental enrichment (EE) by the provision of hemp ropes, sawdust, and rubber balls. A total of 56 pigs were divided in four treatments in two pens of seven pigs per treatment (2 × 2 factorial design). Meat and carcass quality were evaluated. Consumer's acceptability and preference were analysed with a sensory test and a conjoint analysis in 110 consumers. Before slaughter, control pigs (no EE and no HC) presented lower live weight compared with other treatments (p = 0.0009). Although acceptance was the same for all of the treatments, consumers preferred systems aiming to increase pig welfare. The most important factor was production system, with a preference for those improving welfare, followed by feeding system, with a preference for those with natural herbs supplementation. Although price was the least important factor, a segment of consumers showed a clear preference for lower prices. These results suggest that welfare improvements could be appreciated by particular consumer segments.

Effects of breed-production system on collagen, textural, and sensory traits of 10 European beef cattle breeds.

In the current study the collagen, texture, and sensory characteristics of meat from 712 yearling males of 10 local Spanish and French beef breeds raised in their typical production systems were described. The breed-production system affected collagen and texture variables but affected sensory variables only slightly. There was a large amount of intra breed-production system variation for all the variables. French breeds had lower values for collagen solubility (~12%) than Spanish breeds (~40%). Stress (WB) varied from 36 N/cm2 in Casina to 44 N/cm2 in Salers, whereas compression stress at 80% ranged from 35 N/cm2 in Asturiana de los Valles to 40 N/cm2 in Salers. Oven cooking resulted in higher cooking losses (24%) than cooking on a grill (12%). Cooking losses increased as the grill temperature increased. Numerous significant correlations were found among variables. Carcass weight is associated with all the collagen and texture variables. Correlation coefficients among texture and collagen variables were statistically significant and these correlation coefficients were in general higher for solubility percentage than for total collagen content, highlighting the importance of the solubility of collagen rather than total collagen in determining meat textural properties. PRACTICAL APPLICATIONS: To differentiate a product in the market, it is necessary to define its characteristics. Differentiation allows increasing the added value of products and, therefore, income of the farmers. In addition, it guarantees to the consumers that the product they purchase has the intrinsic and extrinsic quality features that they seek. For consumers, beef texture is one of the most important quality attributes sought, therefore, studying factors that can affect beef texture is a major interest for the industry.

On-line Ham Grading using pattern recognition models based on available data in commercial pig slaughterhouses.

The thickness of the subcutaneous fat in hams is one of the most important factors for the dry-curing process and largely determines its final quality. This parameter is usually measured in slaughterhouses by a manual metrical measure to classify hams. The aim of the present study was to propose an automatic classification method based on data obtained from a carcass automatic classification equipment (AutoFom) and intrinsic data of the pigs (sex, breed, and weight) to simulate the manual classification system. The evaluated classification algorithms were decision tree, support vector machines (SVM), k-nearest neighbour and discriminant analysis. A total of 4000 hams selected by breed and sex were classified as thin (0-10 mm), standard (11-15 mm), semi-fat (16-20 mm) and fat (>20 mm). The most reliable model, with a percentage of success of 73%, was SVM with Gaussian kernel, including all data available. These results suggest that the proposed classification method can be a useful online tool in slaughterhouses to classify hams.

Evolution of testes characteristics in entire and immunocastrated male pigs from 30 to 120 kg live weight as assessed by computed tomography with perspective on boar taint.

The present study addressed (1) the levels of boar taint compounds in entire (EM) and immunocastrated (IM) male pigs during their growth, (2) the evolution of testes volume and density and (3) the relationship between physical characteristics of the testes and boar taint compounds. For that purpose 24 EM and 20 IM pigs were CT scanned at several body weights (TBW). After each scanning a subsample of pigs was slaughtered, and subcutaneous fat was collected to determine androstenone and skatole concentration. Additional subsample (n=4/sex) was CT scanned 13 days after the second vaccination (V2). Testes density changes with growth, is different in EM and IM, but is not a reliable marker of the level of boar taint compounds. On the other hand, testes to body volume ratio is a better predictor for androstenone and could provide a good tool at slaughter plants to detect immunocastrated pigs with high boar taint compounds.

Comparison of national ZP equations for lean meat percentage assessment in SEUROP pig classification.

The objectives of the present work were (1) to compare pig carcass classification using different ZP ("Zwei-Punkt-Messverfahren") equations approved in the EU, applied on the same dataset, and to discuss the origin of differences between member states; (2) to evaluate the effect of a possible common ZP equation from the combined dataset and analyse how do the different subsets perform; and (3) to discuss the consequences of different national equations within the EU in view of the harmonization of pig carcass classification. A dataset of 951 carcasses from Belgium, France, Germany, Slovenia and Spain was used, 12 approved ZP equations in Europe were applied and the results were compared. Observed differences can be due not only to differences in genetics and sexes, but also to differences in the ZP measurement and dissection trials performed to obtain national equations. Important differences between some equations (up to almost 5 lean meat percentage) indicate a low harmonization among them and a need for improvements.

Estimation of carcass composition and cut composition from computed tomography images of live growing pigs of different genotypes.

The aim of the present work was (1) to study the relationship between cross-sectional computed tomography (CT) images obtained in live growing pigs of different genotypes and dissection measurements and (2) to estimate carcass composition and cut composition from CT measurements. Sixty gilts from three genotypes (Duroc×(Landrace×Large White), Pietrain×(Landrace×Large White), and Landrace×Large White) were CT scanned and slaughtered at 30 kg (n=15), 70 kg (n=15), 100 kg (n=12) or 120 kg (n=18). Carcasses were cut and the four main cuts were dissected. The distribution of density volumes on the Hounsfield scale (HU) were obtained from CT images and classified into fat (HU between -149 and -1), muscle (HU between 0 and 140) or bone (HU between 141 and 1400). Moreover, physical measurements were obtained on an image of the loin and an image of the ham. Four different regression approaches were studied to predict carcass and cut composition: linear regression, quadratic regression and allometric equations using volumes as predictors, and linear regression using volumes and physical measurements as predictors. Results show that measurements from whole animal taken in vivo with CT allow accurate estimation of carcass and cut composition. The prediction accuracy varied across genotypes, BW and variable to be predicted. In general, linear models, allometric models and linear models, which included also physical measurements at the loin and the ham, produced the lowest prediction errors.

Identification of proteomic biomarkers in M. Longissimus dorsi as potential predictors of pork quality.

Meat quality traits have low heritability and large environmental influences. To predict, improve and manage meat quality, proteomic biomarkers are superior to genetic markers. The objectives of this research were (1) to find associations between proteome profiles of longissimus muscle at slaughter and meat quality accuracies of prediction of traits ranged from 20 up to 80%. Differentially expressed proteins related to drip loss and ultimate pH were identified by NanoLC-FTMSMS. The proteins highlight biological mechanisms that may explain how these traits develop biologically and how they are related to each other.

Effect of a high dose of CLA in finishing pig diets on fat deposition and fatty acid composition in intramuscular fat and other fat depots.

Sixteen gilts were fed a control (4% of sunflower oil) or an experimental diet (4% conjugated linoleic acid (CLA) oil). CLA had no effect on intramuscular fat (IMF) content neither in longissimus thoracis (LT) nor in semimembranosus (SM) muscles but increased liver weight, reduced perirenal fat and tended to reduce backfat between the last 3th-4th lumbar vertebrae. Despite the fact that 9c,11t and 10t,12c CLA isomers were included in the same proportion in the diet, the 9c,11t and 9c,11c were the isomers more deposited in all tissues. Addition of CLA in the diet affected fatty acid composition in a tissue specific manner, increasing percentages of SFA in all tissues, reducing percentages of MUFA in LT and LT subcutaneous fat, and of PUFA in LT subcutaneous fat, liver and SM. The FA modification by dietary CLA in LT IMF was reflected in the different lipid fractions, SFA and MUFA mainly in the neutral lipid fraction, and PUFA in the polar fraction.

SNP variation in the promoter of the PRKAG3 gene and association with meat quality traits in pig.

BACKGROUND: The PRKAG3 gene encodes the γ3 subunit of adenosine monophosphate activated protein kinase (AMPK), a protein that plays a key role in energy metabolism in skeletal muscle. Non-synonymous single nucleotide polymorphisms (SNPs) in this gene such as I199V are associated with important pork quality traits. The objective of this study was to investigate the relationship between gene expression of the PRKAG3 gene, SNP variation in the PRKAG3 promoter and meat quality phenotypes in pork. RESULTS: PRKAG3 gene expression was found to correlate with a number of traits relating to glycolytic potential (GP) and intramuscular fat (IMF) in three phenotypically diverse F1 crosses comprising of 31 Large White, 23 Duroc and 32 Pietrain sire breeds. The majority of associations were observed in the Large White cross. There was a significant association between genotype at the g.-311A>G locus and PRKAG3 gene expression in the Large White cross. In the same population, ten novel SNPs were identified within a 1.3 kb region spanning the promoter and from this three major haplotypes were inferred. Two tagging SNPs (g.-995A>G and g.-311A>G) characterised the haplotypes within the promoter region being studied. These two SNPs were subsequently genotyped in larger populations consisting of Large White (n = 98), Duroc (n = 99) and Pietrain (n = 98) purebreds. Four major haplotypes including promoter SNP's g.-995A>G and g.-311A>G and I199V were inferred. In the Large White breed, HAP1 was associated with IMF% in the M. longissmus thoracis et lumborum (LTL) and driploss%. HAP2 was associated with IMFL% GP-influenced traits pH at 24 hr in LTL (pHULT), pH at 45 min in LTL (pH(45)LT) and pH at 45 min in the M. semimembranosus muscle (pH(45)SM). HAP3 was associated with driploss%, pHULT pH(45)LT and b* Minolta. In the Duroc breed, associations were observed between HAP1 and driploss% and pHUSM. No associations were observed with the remaining haplotypes (HAP2, HAP3 and HAP4) in the Duroc breed. The Pietrain breed was monomorphic in the promoter region. The I199V locus was associated with several GP-influenced traits across all three breeds and IMF% in the Large White and Pietrain breed. No significant difference in promoter function was observed for the three main promoter haplotypes when tested in vitro. CONCLUSION: Gene expression levels of the porcine PRKAG3 are associated with meat quality phenotypes relating to glycolytic potential and IMF% in the Large White breed, while SNP variation in the promoter region of the gene is associated with PRKAG3 gene expression and meat quality phenotypes.

Do all the consumers accept marbling in the same way? The relationship between eating and visual acceptability of pork with different intramuscular fat content.

Several reports show that intramuscular fat (IMF) and/or marbling affect the sensory acceptability of meat. The aim of the present work was to (1) investigate using Spanish consumers the eating and visual acceptability of pork with different levels of IMF, (2) understand more about this acceptability by studying segments of consumers and (3) determine which fresh pork characteristics are important at the point of purchase. Loin section (n = 40) were sorted into four IMF groups: 0.96 ± 0.30% (G1), 2.11 ± 0.07% (G2), 3.72 ± 0.26% (G3), and 5.78 ± 0.19% (G4). Consumers (n = 200) evaluated the acceptability, tenderness and juiciness of cooked loin chops from each IMF group and then ranked raw chops according to visual preference. Two groups of consumers--'lean loin lovers' (55.5%) and 'marbled loin lovers' (44.5%)--were identified based on their visual preferences; however, according to their eating acceptability scores, all the consumers preferred loins with higher IMF levels. Accordingly, the minimum IMF content recommended to ensure a good taste is between 2.2% and 3.4%.

Variation in the IGF2 gene promoter region is associated with intramuscular fat content in porcine skeletal muscle.

Intramuscular fat (IMF) and subcutaneous fat (back fat-BF) are two of the major fat depots in livestock. A QTN located in the insulin-like growth factor 2 gene (IGF2) has been associated with a desirable reduction in BF depth in pigs. Given that the lipid metabolism of intramuscular adipocytes differs from that of subcutaneous fat adipocytes, this study aimed to search for genetic variation in the IGF2 gene that may be associated with IMF, as well as BF, in diverse pig breeds. Four proximal promoter regions of the IGF2 gene were characterised and the association of IGF2 genetic variation with IMF and BF was assessed. Six promoter SNPs were identified in four promoter regions (P1-P4; sequence coverage 945, 866, 784 and 864 bp, respectively) in phenotypically diverse F1 cross populations. Three promoter SNPs were subsequently genotyped in three pure breeds (Pietrain = 98, Duroc = 99 and Large White = 98). All three SNPs were >95% monomorphic in the Pietrain and Duroc breeds but minor alleles were at moderate frequencies in the Large White breed. These SNPs were linked and one was located in a putative transcription factor binding site. Five haplotypes were inferred and three combined diplotypes tested for association with IMF and BF in the Large White. As expected haplotype 1 (likely in LD with the beneficial QTN allele) was superior for BF level. In contrast, the heterozygote diplotype of the most common haplotypes (1 and 2) was associated with higher IMF and marbling scores compared to either homozygote. Gene expression analysis of divergent animals showed that IGF2 was 1.89 fold up-regulated in muscle with higher compared to lower IMF content. These findings suggest that genetic variation in the promoter region of the IGF2 gene is associated with IMF content in porcine skeletal muscle and that greater expression of the IGF2 gene is associated with higher IMF content.

Lean content prediction in pig carcasses, loin and ham by computed tomography (CT) using a density model.

Pig carcasses (122 half carcasses, 52 hams and 52 loins) from the Spanish pig population, were obtained in a commercial slaughterhouse and scanned by computed tomography to generate a predictive model determining weight and lean content. The model is mainly based on a density correction equation. The weight prediction model used the area of the histogram of the whole half carcass in a range of -250 to +800 Hounsfield units added to 2769g corresponding to the average weight of the head and pig feet that have not been scanned. The lean content predictive model is based on the ratio between the area of the lean peak in the calculated histograms and the area of the histogram of the whole half carcass. Both models were correlated with a manual dissection of the samples. Results from the predictive models and from the dissection were compared with the calculation of the root mean square error of calibration (RMSEC) for weight determination and lean content. Results show that a RMSEC of 0.6kg can be obtained for the weight half carcass. For prediction of the lean meat percentage a RMSEC of 1.48% can be obtained for the carcasses, 0.97% for the ham and 1.07% for the loin. According to our results, with a simple methodology it is possible to have good prediction values of weight and lean percentage in accordance with EU regulation.

Carcass and meat quality characteristics of immunocastrated male, surgically castrated male, entire male and female pigs.

The aim of the study was to evaluate the effect of immunocastration on meat and carcass quality compared with meat from females, entire and surgically castrated males. One hundred and eighteen (LandracexDuroc)xPietrain crossbred pigs were assigned to four experimental groups: entire males (EM), females (FE), surgically castrated males (CM) and vaccinated males (IM). Pigs were reared in two pens per sex and slaughtered at an average of 180 days of age. Carcass and meat quality characteristics such as testis size and length, fat depth, lean content, proportion of the carcass represented by each joint, pH, colour and intramuscular fat were evaluated. There was a significant reduction in the size of these sexual organs in IM compared with EM. CM and IM were fatter than FE and EM in the loin area but, in the ham area, CM was the fattest and EM the leanest, while IM and FE were in between. Intramuscular fat of IM (2.1%) was no different from the other sexes evaluated, although it was higher in CM (2.5%) with respect to FE (1.7%) and EM (1.8%). There was no difference between the IM and other treatment groups in meat quality. Regarding ours results we can conclude that from the point of view of meat and carcass quality the immunocastration could be a good alternative to the surgical castration.

Comparison of different devices for predicting the lean meat percentage of pig carcasses.

Lean meat percentage (LMP) is the criterion for carcass classification and it must be measured on line objectively. The aim of this work was to compare the error of the prediction (RMSEP) of the LMP measured with the following different devices: Fat-O-Meat'er (FOM), UltraFOM (UFOM), AUTOFOM and VCS2000. For this reason the same 99 carcasses were measured using all 4 apparatuses and dissected according to the European Reference Method. Moreover a subsample of the carcasses (n=77) were fully scanned with X-ray Computed Tomography equipment (CT). The RMSEP calculated with cross validation leave-one-out was lower for FOM and AUTOFOM (1.8% and 1.9%, respectively) and higher for UFOM and VCS2000 (2.3% for both devices). The error obtained with CT was the lowest (0.96%) in accordance with previous results, but CT cannot be used on line. It can be concluded that FOM and AUTOFOM had better accuracy than UFOM and VCS2000.