Performance of a combined electrotrophic and electrogenic biofilm operated under long-term, continuous cycling.

OBJECTIVES: Evaluate electrochemically active biofilms as high energy density rechargeable microbial batteries toward providing persistent power in applications where traditional battery technology is limiting (, remote monitoring applications). RESULTS: Here we demonstrated that an electrochemically active biofilm was able to store and release electrical charge for alternating charge/discharge cycles of up to 24 h periodicity (50% duty cycle) with no significant decrease in average current density (0.16 ± 0.04 A/m2) for over 600 days. However, operation at 24 h periodicity for > 50 days resulted in a sharp decrease in the current to nearly zero. This current crash was recoverable by decreasing the periodicity. Overall, the coulombic efficiency remained near unity within experimental error (102 ± 3%) for all of the tested cycling periods. Electrochemical characterization here suggests that electron transfer occurs through multiple routes, likely a mixture of direct and mediated mechanisms. CONCLUSIONS: These results indicate that bidirectional electrogenic/electrotrophic biofilms are capable of efficient charge storage/release over a wide range of cycling frequency and may eventually enable development of sustainable, high energy density rechargeable batteries.

Marine Biofilm Engineered to Produce Current in Response to Small Molecules.

Engineered electroactive bacteria have potential applications ranging from sensing to biosynthesis. In order to advance the use of engineered electroactive bacteria, it is important to demonstrate functional expression of electron transfer modules in chassis adapted to operationally relevant conditions, such as non-freshwater environments. Here, we use the Shewanella oneidensis electron transfer pathway to induce current production in a marine bacterium, Marinobacter atlanticus, during biofilm growth in artificial seawater. Genetically encoded sensors optimized for use in Escherichia coli were used to control protein expression in planktonic and biofilm attached cells. Significant current production required the addition of menaquinone, which M. atlanticus does not produce, for electron transfer from the inner membrane to the expressed electron transfer pathway. Current through the S. oneidensis pathway in M. atlanticus was observed when inducing molecules were present during biofilm formation. Electron transfer was also reversible, indicating that electron transfer into M. atlanticus could be controlled. These results show that an operationally relevant marine bacterium can be genetically engineered for environmental sensing and response using an electrical signal.

Marinobacter: A case study in bioelectrochemical chassis evaluation.

The junction of bioelectrochemical systems and synthetic biology opens the door to many potentially groundbreaking technologies. When developing these possibilities, choosing the correct chassis organism can save a great deal of engineering effort and, indeed, can mean the difference between success and failure. Choosing the correct chassis for a specific application requires a knowledge of the metabolic potential of the candidate organisms, as well as a clear delineation of the traits, required in the application. In this review, we will explore the metabolic and electrochemical potential of a single genus, Marinobacter. We will cover its strengths, (salt tolerance, biofilm formation and electrochemical potential) and weaknesses (insufficient characterization of many strains and a less developed toolbox for genetic manipulation) in potential synthetic electromicrobiology applications. In doing so, we will provide a roadmap for choosing a chassis organism for bioelectrochemical systems.

Conservation of Energetic Pathways for Electroautotrophy in the Uncultivated Candidate Order Tenderiales.

Electromicrobiology can be used to understand extracellular electron uptake in previously undescribed chemolithotrophs. Enrichment and characterization of the uncultivated electroautotroph "Candidatus Tenderia electrophaga" using electromicrobiology led to the designation of the order Tenderiales. Representative Tenderiales metagenome-assembled genomes (MAGs) have been identified in a number of environmental surveys, yet a comprehensive characterization of conserved genes for extracellular electron uptake has thus far not been conducted. Using comparative genomics, we identified conserved orthologous genes within the Tenderiales and nearest-neighbor orders important for extracellular electron uptake based on a previously proposed pathway from "Ca. Tenderia electrophaga." The Tenderiales contained a conserved cluster we designated uetABCDEFGHIJ, which encodes proteins containing features that would enable transport of extracellular electrons to cytoplasmic membrane-bound energy-transducing complexes such as two conserved cytochrome cbb3 oxidases. For example, UetJ is predicted to be an extracellular undecaheme c-type cytochrome that forms a heme wire. We also identified clusters of genes predicted to facilitate assembly and maturation of electron transport proteins, as well as cellular attachment to surfaces. Autotrophy among the Tenderiales is supported by the presence of carbon fixation and stress response pathways that could allow cellular growth by extracellular electron uptake. Key differences between the Tenderiales and other known neutrophilic iron oxidizers were revealed, including very few Cyc2 genes in the Tenderiales. Our results reveal a possible conserved pathway for extracellular electron uptake and suggest that the Tenderiales have an ecological role in coupling metal or mineral redox chemistry and the carbon cycle in marine and brackish sediments. IMPORTANCE Chemolithotrophic bacteria capable of extracellular electron uptake to drive energy metabolism and CO2 fixation are known as electroautotrophs. The recently described order Tenderiales contains the uncultivated electroautotroph "Ca. Tenderia electrophaga." The "Ca. Tenderia electrophaga" genome contains genes proposed to make up a previously undescribed extracellular electron uptake pathway. Here, we use comparative genomics to show that this pathway is well conserved among Tenderiales spp. recovered by metagenome-assembled genomes. This conservation extends to near neighbors of the Tenderiales but not to other well-studied chemolithotrophs, including iron and sulfur oxidizers, indicating that these genes may be useful markers of growth using insoluble extracellular electron donors. Our findings suggest that extracellular electron uptake and electroautotrophy may be pervasive among the Tenderiales, and the geographic locations from which metagenome-assembled genomes were recovered offer clues to their natural ecological niche.

A bacterial membrane sculpting protein with BAR domain-like activity.

Bin/Amphiphysin/RVS (BAR) domain proteins belong to a superfamily of coiled-coil proteins influencing membrane curvature in eukaryotes and are associated with vesicle biogenesis, vesicle-mediated protein trafficking, and intracellular signaling. Here, we report a bacterial protein with BAR domain-like activity, BdpA, from Shewanella oneidensis MR-1, known to produce redox-active membrane vesicles and micrometer-scale outer membrane extensions (OMEs). BdpA is required for uniform size distribution of membrane vesicles and influences scaffolding of OMEs into a consistent diameter and curvature. Cryo-TEM reveals that a strain lacking BdpA produces lobed, disordered OMEs rather than membrane tubules or narrow chains produced by the wild-type strain. Overexpression of BdpA promotes OME formation during planktonic growth of S. oneidensis where they are not typically observed. Heterologous expression results in OME production in Marinobacter atlanticus and Escherichia coli. Based on the ability of BdpA to alter membrane architecture in vivo, we propose that BdpA and its homologs comprise a newly identified class of bacterial BAR domain-like proteins.

Engineering Wired Life: Synthetic Biology for Electroactive Bacteria.

Electroactive bacteria produce or consume electrical current by moving electrons to and from extracellular acceptors and donors. This specialized process, known as extracellular electron transfer, relies on pathways composed of redox active proteins and biomolecules and has enabled technologies ranging from harvesting energy on the sea floor, to chemical sensing, to carbon capture. Harnessing and controlling extracellular electron transfer pathways using bioengineering and synthetic biology promises to heighten the limits of established technologies and open doors to new possibilities. In this review, we provide an overview of recent advancements in genetic tools for manipulating native electroactive bacteria to control extracellular electron transfer. After reviewing electron transfer pathways in natively electroactive organisms, we examine lessons learned from the introduction of extracellular electron transfer pathways into Escherichia coli. We conclude by presenting challenges to future efforts and give examples of opportunities to bioengineer microbes for electrochemical applications.

Metagenomic and Metatranscriptomic Characterization of a Microbial Community That Catalyzes Both Energy-Generating and Energy-Storing Electrode Reactions.

Electroactive bacteria are living catalysts, mediating energy-generating reactions at anodes or energy storage reactions at cathodes via extracellular electron transfer (EET). The Cathode-ANode (CANode) biofilm community was recently shown to facilitate both reactions; however, the identities of the primary constituents and underlying molecular mechanisms remain unknown. Here, we used metagenomics and metatranscriptomics to characterize the CANode biofilm. We show that a previously uncharacterized member of the family Desulfobulbaceae, Desulfobulbaceae-2, which had <1% relative abundance, had the highest relative gene expression and accounted for over 60% of all differentially expressed genes. At the anode potential, differential expression of genes for a conserved flavin oxidoreductase (Flx) and heterodisulfide reductase (Hdr) known to be involved in ethanol oxidation suggests a source of electrons for the energy-generating reaction. Genes for sulfate and carbon dioxide reduction pathways were expressed by Desulfobulbaceae-2 at both potentials and are the proposed energy storage reactions. Reduction reactions may be mediated by direct electron uptake from the electrode or from hydrogen generated at the cathode potential. The Desulfobulbaceae-2 genome is predicted to encode at least 85 multiheme (≥3 hemes) c-type cytochromes, some with as many as 26 heme-binding domains, that could facilitate reversible electron transfer with the electrode. Gene expression in other CANode biofilm species was also affected by the electrode potential, although to a lesser extent, and we cannot rule out their contribution to observed current. Results provide evidence of gene expression linked to energy storage and energy-generating reactions and will enable development of the CANode biofilm as a microbially driven rechargeable battery. IMPORTANCE Microbial electrochemical technologies (METs) rely on electroactive bacteria to catalyze energy-generating and energy storage reactions at electrodes. Known electroactive bacteria are not equally capable of both reactions, and METs are typically configured to be unidirectional. Here, we report on genomic and transcriptomic characterization of a recently described microbial electrode community called the Cathode-ANode (CANode). The CANode community is able to generate or store electrical current based on the electrode potential. During periods where energy is not needed, electrons generated from a renewable source, such as solar power, could be converted into energy storage compounds to later be reversibly oxidized by the same microbial catalyst. Thus, the CANode system can be thought of as a living "rechargeable battery." Results show that a single organism may be responsible for both reactions demonstrating a new paradigm for electroactive bacteria.

Microbial survival and growth on non-corrodible conductive materials.

Biofilms growing aerobically on conductive substrates are often correlated with a positive, sustained shift in their redox potential. This phenomenon has a beneficial impact on microbial fuel cells by increasing their overall power output but can be detrimental when occurring on stainless steel by enhancing corrosion. The biological mechanism behind this potential shift is unresolved and a metabolic benefit to cells has not been demonstrated. Here, biofilms containing the electroautotroph 'Candidatus Tenderia electrophaga' catalysed a shift in the open circuit potential of graphite and indium tin oxide electrodes by >100 mV. Biofilms on open circuit electrodes had increased biomass and a significantly higher proportion of 'Ca. Tenderia electrophaga' compared to those on plain glass. Addition of metabolic inhibitors showed that living cells were required to maintain the more positive potential. We propose a model to describe these observations, in which 'Ca. Tenderia electrophaga' drives the shift in open circuit potential through electron uptake for oxygen reduction and CO2 fixation. We further propose that the electrode is continuously recharged by oxidation of trace redox-active molecules in the medium at the more positive potential. A similar phenomenon is possible on natural conductive substrates in the environment.

Marinobacter atlanticus electrode biofilms differentially regulate gene expression depending on electrode potential and lifestyle.

Marinobacter spp. are opportunitrophs with a broad metabolic range including interactions with metals and electrodes. Marinobacter atlanticus strain CP1 was previously isolated from a cathode biofilm microbial community enriched from a sediment microbial fuel cell. Like other Marinobacter spp., M. atlanticus generates small amounts of electrical current when grown as a biofilm on an electrode, which is enhanced by the addition of redox mediators. However, the molecular mechanism resulting in extracellular electron transfer is unknown. Here, RNA-sequencing was used to determine changes in gene expression in electrode-attached and planktonic cells of M. atlanticus when grown at electrode potentials that enable current production (310 and 510 mV vs. SHE) compared to a potential that enables electron uptake (160 mV). Cells grown at current-producing potentials had increased expression of genes for molybdate transport, regardless of planktonic or attached lifestyle. Electrode-attached cells at current-producing potentials showed increased expression of the major export protein for the type VI secretion system. Growth at 160 mV resulted in an increase in expression of genes related to stress response and DNA repair including both RecBCD and the LexA/RecA regulatory network, as well as genes for copper homeostasis. Changes in expression of proteins with PEP C-terminal extracellular export motifs suggests that M. atlanticus is remodeling the biofilm matrix in response to electrode potential. These results improve our understanding of the physiological adaptations required for M. atlanticus growth on electrodes, and suggest a role for metal acquisition, either as a requirement for metal cofactors of redox proteins or as a possible electron shuttling mechanism.

Evidence of a Streamlined Extracellular Electron Transfer Pathway from Biofilm Structure, Metabolic Stratification, and Long-Range Electron Transfer Parameters.

A strain of Geobacter sulfurreducens, an organism capable of respiring solid extracellular substrates, lacking four of five outer membrane cytochrome complexes (extABCD+ strain) grows faster and produces greater current density than the wild type grown under identical conditions. To understand cellular and biofilm modifications in the extABCD+ strain responsible for this increased performance, biofilms grown using electrodes as terminal electron acceptors were sectioned and imaged using electron microscopy to determine changes in thickness and cell density, while parallel biofilms incubated in the presence of nitrogen and carbon isotopes were analyzed using NanoSIMS (nanoscale secondary ion mass spectrometry) to quantify and localize anabolic activity. Long-distance electron transfer parameters were measured for wild-type and extABCD+ biofilms spanning 5-µm gaps. Our results reveal that extABCD+ biofilms achieved higher current densities through the additive effects of denser cell packing close to the electrode (based on electron microscopy), combined with higher metabolic rates per cell compared to the wild type (based on increased rates of 15N incorporation). We also observed an increased rate of electron transfer through extABCD+ versus wild-type biofilms, suggesting that denser biofilms resulting from the deletion of unnecessary multiheme cytochromes streamline electron transfer to electrodes. The combination of imaging, physiological, and electrochemical data confirms that engineered electrogenic bacteria are capable of producing more current per cell and, in combination with higher biofilm density and electron diffusion rates, can produce a higher final current density than the wild type. IMPORTANCE Current-producing biofilms in microbial electrochemical systems could potentially sustain technologies ranging from wastewater treatment to bioproduction of electricity if the maximum current produced could be increased and current production start-up times after inoculation could be reduced. Enhancing the current output of microbial electrochemical systems has been mostly approached by engineering physical components of reactors and electrodes. Here, we show that biofilms formed by a Geobacter sulfurreducens strain producing ∼1.4× higher current than the wild type results from a combination of denser cell packing and higher anabolic activity, enabled by an increased rate of electron diffusion through the biofilms. Our results confirm that it is possible to engineer electrode-specific G. sulfurreducens strains with both faster growth on electrodes and streamlined electron transfer pathways for enhanced current production.

Nanoliter scale electrochemistry of natural and engineered electroactive bacteria.

Bacterial extracellular electron transfer (EET) is envisioned for use in applied biotechnologies, necessitating electrochemical characterization of natural and engineered electroactive biofilms under conditions similar to the target application, including small-scale biosensing or biosynthesis platforms, which is often distinct from standard 100 mL-scale stirred-batch bioelectrochemical test platforms used in the laboratory. Here, we adapted an eight chamber, nanoliter volume (500 nL) electrochemical flow cell to grow biofilms of both natural (Biocathode MCL community, Marinobacter atlanticus, and Shewanella oneidensis MR1) or genetically modified (S. oneidensis ΔMtr and S. oneidensis ΔMtr + pLB2) electroactive bacteria on electrodes held at a constant potential. Maximum current density achieved by unmodified strains was similar between the nano- and milliliter-scale reactors. However, S. oneidensis biofilms engineered to activate EET upon exposure to 2,4-diacetylphloroglucinol (DAPG) produced current at wild-type levels in the stirred-batch reactor, but not in the nanoliter flow cell. We hypothesize this was due to differences in mass transport of DAPG, naturally-produced soluble redox mediators, and oxygen between the two reactor types. Results presented here demonstrate, for the first time, nanoliter scale chronoamperometry and cyclic voltammetry of a range of electroactive bacteria in a three-electrode reactor system towards development of miniaturized, and potentially high throughput, bioelectrochemical platforms.

Activation of Protein Expression in Electroactive Biofilms.

Microbes that form biofilms on electrodes and generate electrical current responses could be integrated into devices to perform sensing, conduct signals, or act as living microprocessors. A challenge in working with these species is the ability to visualize biofilm formation and protein expression in real-time while also measuring current, which is not possible with typical bio-electrochemical reactors. Here, we present a three-dimensional-printed flow cell for simultaneous electrochemistry and fluorescence imaging. Current-producing biofilms of Marinobacter atlanticus constitutively expressing green fluorescent protein were grown on the flow cell working electrode. Increasing current corresponded with increasing surface coverage and was comparable to biofilms grown in typical stirred-batch reactors. An isopropyl ß-d-1-thiogalactopyranoside (IPTG) inducible system driving yellow fluorescent protein was used to assess the spatiotemporal activation of protein expression within the biofilm at different stages of growth and induction dynamics. The response time ranged from 30 min to 5 h, depending on the conditions. These data demonstrate that the electrochemical flow cell can evaluate the performance of an electrically active environmental bacterium under conditions relevant for development as a living electronic sensor.

Meeting report of the third annual Tri-Service Microbiome Consortium symposium.

The Tri-Service Microbiome Consortium (TSMC) was founded to enhance collaboration, coordination, and communication of microbiome research among U.S. Department of Defense (DoD) organizations and to facilitate resource, material and information sharing among consortium members. The 2019 annual symposium was held 22-24 October 2019 at Wright-Patterson Air Force Base in Dayton, OH. Presentations and discussions centered on microbiome-related topics within five broad thematic areas: 1) human microbiomes; 2) transitioning products into Warfighter solutions; 3) environmental microbiomes; 4) engineering microbiomes; and 5) microbiome simulation and characterization. Collectively, the symposium provided an update on the scope of current DoD microbiome research efforts, highlighted innovative research being done in academia and industry that can be leveraged by the DoD, and fostered collaborative opportunities. This report summarizes the presentations and outcomes of the 3rd annual TSMC symposium.

Redox Characterization of Electrode-Immobilized Bacterial Microcompartment Shell Proteins Engineered To Bind Metal Centers.

Bacterial microcompartment (BMC) shells are modular, selectively permeable, nanoscale protein shells that self-assemble from hexagonal and pentagonal building blocks in vivo or in vitro. Natural and engineered BMC shells colocalize and concentrate catalysts and metabolites in their lumen, increasing reaction kinetics. Here, we describe the design and characterization of a shell protein (pseudohexameric/trimeric BMC-T1HO protein) engineered to coordinate a Cu ion in its pore. Several designs, each varying the position of an introduced coordinating histidine residue, were shown to maintain their trimeric oligomerization state upon Cu coordination via chemical denaturation experiments. We measured reversible redox activity from electrode-bound Cu-3His BMC-T1HO variants, with formal potential(s) that were dependent on the Cu coordination site within the discoidal shaped trimer (E°' = +208 to +265 mV vs SHE). These results represent important steps toward expanding the functionality (Cu coordination) and applicability (redox activity on an electrode surface) of engineered BMC reactor architectures.

Complete Genome Sequence of Leisingera aquamixtae R2C4, Isolated from a Self-Regenerating Biocathode Consortium.

Here, we present the complete genome sequence of Leisingera aquamixtae R2C4, isolated from the electroautotrophic microbial consortium biocathode MCL (Marinobacter-Chromatiaceae-Labrenzia). As an isolate of a current-producing system, the genome sequence of L. aquamixtae will yield insights regarding electrode-associated microorganisms and communities. A dark pigment is also observed during cultivation.

Relative abundance of 'Candidatus Tenderia electrophaga' is linked to cathodic current in an aerobic biocathode community.

Biocathode microbial communities are proposed to catalyse a range of useful reactions. Unlike bioanodes, model biocathode organisms have not yet been successfully cultivated in isolation highlighting the need for culture-independent approaches to characterization. Biocathode MCL (Marinobacter, Chromatiaceae, Labrenzia) is a microbial community proposed to couple CO2 fixation to extracellular electron transfer and O2 reduction. Previous metagenomic analysis of a single MCL bioelectrochemical system (BES) resulted in resolution of 16 bin genomes. To further resolve bin genomes and compare community composition across replicate MCL BES, we performed shotgun metagenomic and 16S rRNA gene (16S) sequencing at steady-state current. Clustering pooled reads from replicate BES increased the number of resolved bin genomes to 20, over half of which were > 90% complete. Direct comparison of unassembled metagenomic reads and 16S operational taxonomic units (OTUs) predicted higher community diversity than the assembled/clustered metagenome and the predicted relative abundances did not match. However, when 16S OTUs were mapped to bin genomes and genome abundance was scaled by 16S gene copy number, estimated relative abundance was more similar to metagenomic analysis. The relative abundance of the bin genome representing 'Ca. Tenderia electrophaga' was correlated with increasing current, further supporting the hypothesis that this organism is the electroautotroph.

On the relationship between long-distance and heterogeneous electron transfer in electrode-grown Geobacter sulfurreducens biofilms.

The ability of certain microorganisms to live in a multi-cell thick, electrode-grown biofilm by utilizing the electrode as a metabolic electron acceptor or donor requires electron transfer across cell membranes, through the biofilm, and across the biofilm/electrode interface. Even for the most studied system, anode-grown Geobacter sulfurreducens, the mechanisms underpinning each process and how they connect is largely unresolved. Here we report on G. sulfurreducens biofilms grown across the gap separating two electrodes by maintaining one electrode at 0.300V vs. Ag/AgCl (0.510V vs. SHE) to act as a sustained metabolic electron acceptor while the second electrode was at open circuit. The poised electrode exhibited the characteristic current-time profile for electrode-dependent G. sulfurreducens biofilm growth. The open circuit potential (OCP) of the second electrode however increased after initially decreasing for 1.5-2days. The increase in OCP is taken to indicate the point at which the growing biofilm bridged the gap between the electrodes, enabling cells in contact with the open circuit electrode to utilize the poised electrode as an electron acceptor. After but not prior to reaching this point, the second electrode was able to act as a sustainable electron acceptor immediately after being placed under potential control without requiring further time to develop. These results indicate that heterogeneous ET (H-ET) across the biofilm/electrode interface and long-distance ET (LD-ET) through the biofilm are highly correlated, if not inseparable, and may share many common components.

Development of a Genetic System for Marinobacter atlanticus CP1 (sp. nov.), a Wax Ester Producing Strain Isolated From an Autotrophic Biocathode.

Here, we report on the development of a genetic system for Marinobacter sp. strain CP1, previously isolated from the Biocathode MCL community and shown to oxidize iron and grow as a cathodic biofilm. Sequence analysis of the small and large subunits of the 16S rRNA gene of CP1, as well as comparison of select conserved proteins, indicate that it is most closely related to Marinobacter adhaerens HP15 and Marinobacter sp. ES.042. In silico DNA-DNA hybridization using the genome-to-genome distance calculator (GGDC) predicts CP1 to be a new species of Marinobacter described here as Marinobacter atlanticus. CP1 is competent for transformation with plasmid DNA using conjugation with Escherichia coli donor strain WM3064 and constitutive expression of green fluorescent protein (GFP) is stable in the absence of antibiotic selection. Targeted double deletion mutagenesis of homologs for the M. aquaeoli fatty acyl-CoA reductase (acrB) and fatty aldehyde reductase (farA) genes resulted in a loss of production of wax esters; however, single deletion mutants for either gene resulted in an increase in total wax esters recovered. Genetic tools presented here for CP1 will enable further exploration of wax ester synthesis for biotechnological applications, as well as furthering our efforts to understand the role of CP1 within the Biocathode MCL community.