RESUMO
This paper presents the research results on the influence of vibration abrasive machining parameters on the surface layer integrity of elements made by LPBF technology from Inconel 939. The research was carried out on samples of various sizes on vibrating smoothing machines. The influence of the size of the processed elements, the type of abrasive shapes, the processing time, and the supporting fluid on the surface roughness and microstructure of the processed elements was analyzed. Tests have shown that as a result of using vibration processing, it is possible to reduce the surface roughness five times to the value of Ra = 1.1 µm. A significant influence of the type of abrasive shapes was found. There was no significant effect of the machining fluid on the process.
RESUMO
This paper presents the testing methodology of specimens made of layers of titanium alloy Ti6Al4V in dynamic impact loading conditions. Tests were carried out using a drop-weight impact tower. The test methodology allowed us to record parameters as displacement or force. Based on recorded data, force and absorbed energy curves during plastic deformation and sheet perforation were created. The characteristics of the fractures were also analyzed. The impact test simulation was carried out in the ABAQUS/Explicit environment. Results for one, two, and three layers of titanium alloy were compared. The increase in force required to initialize the damage and the absorbed energy during plastic deformation can be observed with an increase in the number of layers. The increase in absorbed energy is close to linear. In the simulation process, parameters such as Huber-Mises-Hencky stress value, equivalent plastic strain, temperature increase, and stress triaxiality were analyzed.