A Phosphanyl Phosphagermene and its Reactivity.

Reaction of a nucleophilic germylene Ge[CH(SiMe3)2]2 with the phosphanyl phosphaketene [{(H2C)(NDipp)}2P]PCO induces decarbonylation to form a phosphanyl phosphagermene [{(H2C)(NDipp)}2P]P=Ge[CH(SiMe3)2]2 (1; Dipp = 2,6-diisopropyl-phenyl). Addition of CO2 or MeCN to 1 results in [3+2]-cycloaddition reactions to afford five-membered heterocycles. This mode of reactivity is reminiscent of that observed for frustrated Lewis pairs, with the pendant phosphanyl group acting as a base and the germanium center as a Lewis acid. Contrastingly, 1,2-addition across the P=Ge bond was observed when using ammonia, small primary amines (NH2nPr, NH2iPr), or metal complexes (e.g. Au(PPh3)Cl and ZnEt2). These latter reactions allow for the one-step synthesis of metal phosphide complexes.

Carbamoylphosphinidene: A Phosphorus Analogue of Carbonyl Nitrene.

Carbonyl nitrenes are versatile intermediates that have been extensively characterized; however, their phosphorus analogues remain largely unknown. Herein, we report the observation of a rare example of carbonyl phosphinidene NH2C(O)P, which was generated through the photolytic (193 nm) dehydrogenation of phosphinecarboxamide (NH2C(O)PH2) in a solid N2-matrix at 12 K. The characterization of NH2C(O)P in the triplet ground state with matrix-isolation IR and ultraviolet-visible (UV-vis) spectroscopy is supported by comprehensive isotope labeling experiments (D and 15N) and quantum chemical calculations. Upon visible-light irradiation at 680 nm, NH2C(O)P inserts into dihydrogen by the reformation of NH2C(O)PH2 with concomitant isomerization to the more stable aminophosphaketene (NH2PCO). Additionally, the photoisomerization of NH2C(O)PH2 to NH2C(OH) = PH along with decomposition by yielding hydrogen-bonded complexes HNCO···PH3 and HPCO···NH3 has been observed in the matrix.

Trapping an Elusive Phosphanyl-Phosphaalumene.

We describe our efforts to access a compound with an Al=P double bond by reaction of Al(Nacnac) towards [H2CN(Dipp)]2P(PCO) (Nacnac=HC[C(Me)N(Dipp)]2; Dipp=2,6-iPr2C6H3). Our observations are consistent with the formation of a transient phosphanyl-phosphaalumene at low temperatures (-70 °C), however this species was found to readily undergo intramolecular C-H activation of the ß-diketiminato ligand upon warming to room temperature. The reactivity of the transient complex toward small molecules including dihydrogen, carbon dioxide, phosphaketenes, amines and silanes could be explored at low temperatures, showcasing that the target compound can react as both a frustrated Lewis pair (via the pendant phosphanyl moiety) or in hydroelementation reactions of the Al=P bond. The elusive target molecule could be trapped by addition of a Lewis base (tetrahydrofuran) affording an isolable molecular species that reacts in an analogous fashion to the base-free compound.

Ligand Centered Reactivity of a Transition Metal Bound Geometrically Constrained Phosphine.

The electronic properties, coordination chemistry and reactivity of metal complexes of a planar (C2v symmetric) acridane-derived geometrically constrained phosphine, P(NNN), are described. On complexation to metal centers, the phosphine was found to adopt a distorted trigonal pyramidal structure with a high barrier to pyramidal inversion (22.3 kcal/mol at 298 K for Au[P(NNN)]Cl). Spectroscopic data and theoretical calculations carried out at the density functional level of theory indicate that P(NNN) is a moderate σ-donor, with significant π-acceptor properties. Despite the distortion undergone by the phosphorus atom on coordination to metal centers, the P(NNN) ligand retains its ability to react with small molecule substrates with polar E-H bonds (MeOH, NH2Ph, NH3). It does so in a concerted fashion across one of the P-N bonds, and reversibly in the case of amine substrates. This cooperative bond activation chemistry may ultimately prove beneficial in catalysis.

Metal Influence on Cyaphide-Azide 1,3-Dipolar Cycloaddition Reactions: Aromaticity and Activation Strain.

The factors governing 1,3-dipolar cycloaddition reactions involving C≡P-containing compounds are computationally explored in detail using quantum chemical tools. To this end, the parent process involving tBuN3 and tBuCP is analyzed and compared to the analogous reaction involving organometallic cyaphide complexes (metal=Au, Pt, Ge, Mg), in order to understand the role of the metal fragment in such transformations. It is found that while the metal fragment does not significantly influence the aromaticity of the corresponding concerted transition states or the regioselectivity of the transformation, it may modify the reactivity of the cyaphide complexes (i. e. Ge and Mg cyaphide complexes are comparatively more reactive). The computed reactivity trends and the factors behind the regioselectivity of the cycloaddition reaction are quantitatively analyzed with the help of the activation strain model in combination with the energy decomposition analysis method.

Softer Is Better for Titanium: Molecular Titanium Arsenido Anions Featuring Ti≡As Bonding and a Terminal Parent Arsinidene.

We introduce the arsenido ligand onto the TiIV ion, yielding a remarkably covalent Ti≡As bond and the parent arsinidene Ti═AsH moiety. An anionic arsenido ligand is assembled via reductive decarbonylation involving the discrete TiII salt [K(cryptand)][(PN)2TiCl] (1) (cryptand = 222-Kryptofix) and Na(OCAs)(dioxane)1.5 in thf/toluene to produce the mixed alkali ate-complex [(PN)2Ti(As)]2(µ2-KNa(thf)2) (2) and the discrete salt [K(cryptand)][(PN)2Ti≡As] (3) featuring a terminal Ti≡As ligand. Protonation of 2 or 3 with various weak acids cleanly forms the parent arsinidene [(PN)2Ti═AsH] (4), which upon deprotonation with KCH2Ph in thf generates the more symmetric anionic arsenido [(PN)2Ti(As){µ2-K(thf)2}]2 (5). Experimental and computational studies suggest the pKa of 4 to be ∼23, and the bond orders in 2, 3, and 5 are all in the range of a Ti≡As triple bond, with decreasing bond order in 4.

Controlled cluster expansion at a Zintl cluster surface.

Reaction of the tris-hypersilyl nonagermanide Zintl cluster salt, K[Ge9 (Hyp)3 ] (Hyp=Si(SiMe3 )3 ) with [Rh(η2 ,η2 -L)Cl]2 (L=1,5-cyclooctadiene, COD; norbornadiene, NBD) afforded eleven- and twelve-vertex homo-multimetallic clusters by cluster core expansion. Using a stepwise procedure, starting from the Zintl cluster [Rh(COD){Ge9 (Hyp)3 }] and [Ir(COD)Cl]2 , this methodology was expanded for the synthesis of eleven-vertex hetero-multimetallic clusters. A mechanism for the formation of these first examples of closo eleven-vertex Zintl clusters is proposed, informed by density functional theory calculations.

Aluminium and Gallium Silylimides as Nitride Sources.

Terminal aluminium and gallium imides of the type K[(NON)M(NR)], bearing heteroatom substituents at R, have been synthesised via reactions of anionic aluminium(I) and gallium(I) reagents with silyl and boryl azides (NON=4,5-bis(2,6-diisopropyl-anilido)-2,7-di-tert-butyl-9,9-dimethyl-xanthene). These systems vary significantly in their lability in solution: the N(Sii Pr3 ) and N(Boryl) complexes are very labile, on account of the high basicity at nitrogen. Phenylsilylimido derivatives provide greater stabilization through the π-acceptor capabilities of the SiR3 group. K[(NON)AlN(Sit BuPh2 )] offers a workable compromise between stability and solubility, and has been completely characterized by spectroscopic, analytical and crystallographic methods. The silylimide species examined feature minimal π-bonding between the imide ligand and aluminium/gallium, with the HOMO and HOMO-1 orbitals effectively comprising orthogonal lone pairs centred at N. Reactivity-wise, both aluminium and gallium silylimides can act as viable sources of nitride, [N]3- , with systems derived from either metal reacting with CO to afford cyanide complexes. By contrast, only the gallium system K[(NON)Ga{N(SiPh3 )}] is capable of effecting a similar transformation with N2 O to yield azide, N3 - , via formal oxide/nitride metathesis. The aluminium systems instead generate RN3 via transfer of the imide fragment [RN]2- .

Hydroelementation and Phosphinidene Transfer: Reactivity of Phosphagermenes and Phosphastannenes Towards Small Molecule Substrates.

We describe the facile synthesis of [(Me3 Si)2 CH]2 E=PMes* (E=Ge, Sn) from the reaction of the tetrylenes with the phospha-Wittig reagent, Me3 P-PMes*. Their reactivity towards a range of substrates with protic and hydridic E-H bonds (E=N, O, Si) is described. In addition to hydroelementation reactions of the E=P bonds, we show that these compounds, particularly [(Me3 Si)2 CH]2 Sn=PMes*, also act as base-stabilized phosphinidenes, allowing phosphinidene transfer to other nucleophiles.

An Inorganic Click Reaction for the Synthesis of Interlocked Molecules.

We describe the use of the cyaphide-azide 1,3-dipolar cycloaddition reaction for the synthesis of a new class of inorganic rotaxanes containing gold(I) triazaphosphole stoppers. Electron-deficient bis-azides, which thread perethylated pillar[5]arene in aromatic solvents, readily react with two equivalents of Au(IDipp)(CP) (IDipp=1,3-bis-(2,6-diisopropylphenyl)-imidazol-2-ylidene) to afford interlocked molecules via an inorganic click reaction. These transformations proceed in good yields (ca. 65 %) and in the absence of a catalyst. The resulting organometallic rotaxanes are air- and moisture-stable and can be purified by column chromatography under aerobic conditions. The targeted rotaxanes were characterized by multi-element nuclear magnetic resonance (NMR) spectroscopy, mass-spectrometry, and single-crystal X-ray diffraction.

Phosphinecarboxamide based InZnP QDs - an air tolerant route to luminescent III-V semiconductors.

We describe a new synthetic methodology for the preparation of high quality, emission tuneable InP-based quantum dots (QDs) using a solid, air- and moisture-tolerant primary phosphine as a group-V precursor. This presents a significantly simpler synthetic pathway compared to the state-of-the-art precursors currently employed in phosphide quantum dot synthesis which are volatile, dangerous and air-sensitive, e.g. P(Si(CH3)3)3.

Cyaphide-Azide 1,3-Dipolar Cycloaddition Reactions: Scope and Applicability.

Several examples of the cyaphide-azide 1,3-dipolar cycloaddition reaction to afford metallo-triazaphospholes are reported. The gold(I) triazaphospholes Au(IDipp)(CPN3 R) (IDipp=1,3-bis(2,6-diisopropylphenyl)imidazol-2-ylidene; R=t Bu, Ad, Dipp), magnesium(II) triazaphospholes, {Mg(Dipp NacNac)(CPN3 R)}2 (Dipp NacNac=CH{C(CH3 )N(Dipp)}2 , Dipp=2,6-diisopropylphenyl; R=t Bu, Bn), and germanium(II) triazaphosphole Ge(Dipp NacNac)-(CPN3 t Bu) can be prepared straightforwardly, under mild conditions and in good yields, in a manner reminiscent of the classic alkyne-azide click reaction (albeit without a catalyst). This reactivity can be extended to compounds with two azide functional groups such as 1,3-diazidobenzene. It is shown that the resulting metallo-triazaphospholes can be used as precursors to carbon-functionalized species, including protio- and iodo-triazaphospholes.

Putting cyaphide in its place: determining the donor/acceptor properties of the κC-cyaphido ligand.

The synthesis of group 9 pyridine-diimine complexes M(DippPDI)X and [M(DippPDI)L]+ (M = Co, Rh; DippPDI = 1,1'-(pyridine-2,6-diyl)bis(N-(2,6-diisopropylphenyl)ethan-1-imine); X = CP-, CCH-; L = CO, t BuNC) bearing a series of strong-field ligands, including the cyaphide ion (C[triple bond, length as m-dash]P-), is reported. A combined experimental and computational comparative study of the group 9 PDI cyaphide complexes Co(DippPDI)(CP) and Rh(DippPDI)(CP), as well as the N-heterocyclic carbene (NHC) gold(i) cyaphide complex Au(IDipp)(CP) (IDipp = 1,3-bis(2,6-diisopropylphenyl)imidazol-2-ylidene), reveals the σ donor and π acceptor properties of the κC-cyaphido ligand, and allow us to suggest a position for this ion in the spectrochemical series.

Reactivity of a Strictly T-Shaped Phosphine Ligated by an Acridane Derived NNN Pincer Ligand.

The steric tuning of a tridentate acridane-derived NNN pincer ligand allows for the isolation of a strictly T-shaped phosphine that exhibits ambiphilic reactivity. Well-defined phosphorus-centered reactivity towards nucleophiles and electrophiles is reported, contrasting with prior reports on this class of compounds. Reactions towards oxidants are also described. The latter result in the two-electron oxidation of the phosphorus atom from +III to +V and are accompanied by a strong geometric distortion of the NNN pincer ligand. By contrast, cooperative activation of E-H (HCl, HBcat, HOMe) bonds proceeds with retention of the phosphorus redox state. When using H2 O as a substrate, the reaction results in the full disassembly of H2 O to its constituent atoms, highlighting the potential of this platform for small molecule activation reactions.

Metal-Mediated Oligomerization Reactions of the Cyaphide Anion.

The cyaphide anion, CP- , is shown to undergo three distinct oligomerization reactions in the coordination sphere of metals. Reductive coupling of Au(IDipp)(CP) (IDipp=1,3-bis(2,6-diisopropylphenyl)imidazol-2-ylidene) by Sm(Cp*)2 (OEt2 ) (Cp*=1,2,3,4,5-pentamethylcyclopentadienyl), was found to afford a tetra-metallic complex containing a 2,3-diphosphabutadiene-1,1,4,4-tetraide fragment. By contrast, non-reductive dimerization of Ni(SIDipp)(Cp)(CP) (SIDipp=1,3-bis(2,6-diisopropylphenyl)-imidazolidin-2-ylidene; Cp=cyclopentadienyl), gives rise to an asymmetric bimetallic complex containing a 1,3-diphosphacyclobutadiene-2,4-diide moiety. Spontaneous trimerization of Sc(Cp*)2 (CP) results in the formation of a trimetallic complex containing a 1,3,5-triphosphabenzene-2,4,6-triide fragment. These transformations show that while cyaphido transition metal complexes can be readily accessed using metathesis reactions, many such species are unstable to further oligomerization processes.

The Chemistry of the Cyaphide Ion.

We review the known chemistry of the cyaphide ion, (C≡P)- . This remarkable diatomic anion has been the subject of study since the late nineteenth century, however its isolation and characterization eluded chemists for almost a hundred years. In this mini-review, we explore the pioneering synthetic experiments that first allowed for its isolation, as well as more recent developments demonstrating that cyaphide transfer is viable in well-established salt-metathesis protocols. The physical properties of the cyaphide ion are also explored in depth, allowing us to compare and contrast the chemistry of this ion with that of its lighter congener cyanide (an archetypal strong field ligand and important organic functional group). Recent studies show that the cyaphide ion has the potential to be used as a versatile chemical regent for the synthesis of novel molecules and materials, hinting at many interesting future avenues of investigation.

An Aluminium Imide as a Transfer Agent for the [NR]2- Function via Metathesis Chemistry.

The reactions of a terminal aluminium imide with a range of oxygen-containing substrates have been probed with a view to developing its use as a novel main group transfer agent for the [NR]2- fragment. We demonstrate transfer of the imide moiety to [N2 ], [CO] and [Ph(H)C] units driven thermodynamically by Al-O bond formation. N2 O reacts rapidly to generate the organoazide DippN3 (Dipp=2,6-i Pr2 C6 H3 ), while CO2 (under dilute reaction conditions) yields the corresponding isocyanate, DippNCO. Mechanistic studies, using both experimental and quantum chemical techniques, identify a carbamate complex K2 [(NON)Al-{κ2 -(N,O)-N(Dipp)CO2 }]2 (formed via [2+2] cycloaddition) as an intermediate in the formation of DippNCO, and also in an alternative reaction leading to the generation of the amino-dicarboxylate complex K2 [(NON)Al{κ2 -(O,O')-(O2 C)2 N-(Dipp)}] (via the take-up of a second equivalent of CO2 ). In the case of benzaldehyde, a similar [2+2] cycloaddition process generates the metallacyclic hemi-aminal complex, Kn [(NON)Al{κ2 -(N,O)-(N(Dipp)C(Ph)(H)O}]n . Extrusion of the imine, PhC(H)NDipp, via cyclo-reversion is disfavoured thermally, due to the high energy of the putative aluminium oxide co-product, K2 [(NON)Al(O)]2 . However, addition of CO2 allows the imine to be released, driven by the formation of the thermodynamically more stable aluminium carbonate co-product, K2 [(NON)Al(κ2 -(O,O')-CO3 )]2 .

Dioxygen Splitting by a Tantalum(V) Complex Ligated by a Rigid, Redox Non-Innocent Pincer Ligand.

The reaction of TaMe3 Cl2 with the rigid acridane-derived trisamine H3 NNN yields the tantalum(V) complex [TaCl2 (NNNcat )]. Subsequent reaction with dioxygen results in the full four-electron reduction of O2 yielding the oxido-bridged bimetallic complex [{TaCl2 (NNNsq )}2 O]. This dinuclear complex features an open-shell ground state due to partial ligand oxidation and was comprehensively characterized by single crystal X-ray diffraction, LIFDI mass spectrometry, NMR, EPR, IR and UV/VIS/NIR spectroscopy. The mechanism of O2 activation was investigated by DFT calculations revealing initial binding of O2 to the tantalum(V) center followed by complete O2 scission to produce a terminal oxido-complex.

Formation, Reactivity and Decomposition of Aryl Phospha-Enolates.

Two lithium phospha-enolates [RP=C(Sii Pr3 )OLi]2 were prepared by reaction of triisopropyl silyl phosphaethynolate, i Pr3 SiPCO, with aryl lithium reagents LiR (R=Mes: 1,3,5-trimethyl phenyl; or Mes*: 1,3,5,-tri-tertbutyl phenyl). Monomer/dimer aggregation of the enolates can be modulated by addition of 12-crown-4. Substitution of lithium for a heavier alkali metal was achieved through initial formation of a silyl enol ether, followed by reaction with KOt Bu to form the corresponding potassium phospha-enolate [MesP=C(Sii Pr3 )OK]2 . On addition of water, the enolates are protonated to afford RP=C(Sii Pr3 )(OH). For the sterically less demanding system (R=Mes), this phospha-enol rapidly tautomerises to the corresponding acyl phosphine MesP(H)C(Sii Pr3 )(O), which on heating extrudes CO. In contrast, bulkier phospha-enol (R=Mes*) is stable to rearrangement at room temperature and thermally decomposes to RH and i Pr3 SiPCO.

Zintl cluster supported low coordinate Rh(i) centers for catalytic H/D exchange between H2 and D2.

Ligand exchange reactions of [Rh(COD){η4-Ge9(Hyp)3}] with L-type nucleophiles such as PMe3, PPh3, IMe4 (IMe4 = 1,3,4,5-tetramethylimidazol-2-ylidene) or [W(Cp)2H2] result in the displacement of the COD ligand to afford clusters with coordinatively unsaturated trigonal pyramidal rhodium(i) centers [Rh(L){η3-Ge9(Hyp)3}]. These species can be readily protonated allowing access to cationic rhodium-hydride complexes, e.g. [RhH(PPh3){η3-Ge9(Hyp)3}]+. These clusters act as catalysts in H/D exchange between H2 and D2 and alkene isomerisation, thereby illustrating that metal-functionalized Zintl clusters are active in both H-H and C-H bond activation processes. The mechanism of H/D exchange was probed using parahydrogen induced polarization experiments.