RESUMO
The production of artificial anti-CB1 antibodies in nanoparticle format is described using the solid-phase imprinting approach. Instead of whole protein imprinting, a linear C-terminus sequence of the receptor comprising 15 amino acids (458-KVTMSVSTDTSAEAL-472) has been used as template, in accordance with the epitope imprinting approach. This sequence is located intracellularly, and it is involved in coupling to Gi/o proteins, being responsible for CB1 receptor desensitisation and internalisation. Developed molecularly imprinted materials were found to be in the nanometre scale, with a particle size of 126.4 ± 10.5 nm at pH 3 (25 ºC) and spherical shape. It was also observed that the size was sensible to temperature changes being reduced to 106.3 ± 15.2 nm at 35 °C. Lower critical solution temperature of this polymer was found to be ≈ 33.4 °C. The affinity and selectivity of the artificial antibody were assessed through dot blot and Western blot experiments. For the latter, recombinant fusion proteins GST-CB1414-472 and GST-CB1414-442 were produced to work respectively as target and negative control proteins. The control protein did not carry the target epitope for being devoid of last 30 amino acids at the C-terminus. The results demonstrated that the anti-CB1 material recognised selectively the target protein, thanks to the presence of the 15-amino acid sequence selected as epitope, which revealed that binding occurred at the C-terminus of the receptor itself. The methodology presented may pave the way for the development of novel imprinted nanomaterials for other proteins included in the superfamily of the G-protein-coupled receptors (GPCR).
Assuntos
Receptor CB1 de CanabinoideRESUMO
Systematic fungicides treatments in vine-growing European ecosystems have been conducted for decades. The goal of this study was to determine the mobility and persistence of 20 fungicides used in two viticultural zones in Atlantic and Mediterranean climates, from the moment of their application until their distribution throughout different compartments of the ecosystem: soil, water, grapes, musts and wines. This study also sought to obtain valuable information to reduce the usage of these products without affecting the health of the vines. For this purpose, different phytosanitary treatments were applied, using dosing criteria based on data provided by meteorological stations, degree-day accumulation, phenological state, and growers' criteria. The observed differences between studied geographical areas were not significant with regard to chemical accumulation in the soil and water; however, they were significantly different regarding to grapes, musts, and wines.
Assuntos
Agricultura/métodos , Ecossistema , Meio Ambiente , Fungicidas Industriais/análise , Vinho , VitisRESUMO
The characterization of ancient lipids from prehistoric sediments (fumiers) located in a rock-selter has been possible after the optimization of an analytical method based on the microwave-assisted extraction and solid-phase extraction clean-up step and a final derivatization step followed by gas chromatography with mass spectrometry. Eight sterols and two bile acids were detected just in the partially burned and unburned layers of the fumiers (animal organic residues deriving from manure/dung). The relationship between some of these compounds can be used to distinguish the biogenic origin of the samples, concluding that these strata (from Early Neolithic to Late Chalcolithic/Early Bronze Age) can be classified as ruminant residues. Three main periods of activity are observed over a period of 2000 years: one from 3990 ± 40 before present (4530-4410 calibrated before present) to 4100 ± 40 before present (4820-4750/4730-4510/4470-4450 calibrated before present), the second from 4470 ± 40 before present (5300-4970 calibrated before present) to 5490 ± 30 before present (6310-6275/6230-6220 calibrated before present) and the third from 5880 ± 30 before present (6775-6765/6750-6645 calibrated before present) to 6010 ± 30 before present (6940-6780/6765-6755 calibrated before present). Chemical data obtained are in concordance with the previous results obtained in the area.
RESUMO
The work presented here explores the grafting of molecularly imprinted nanoparticles (MIN) on silica beads for the development of new chiral stationary phases (CSP). Both solid-phase imprinting and precipitation polymerisation were tested for MIN synthesis though the latter approach was the only one that provided efficient chiral selectors. MIN particles were prepared by iniferter polymerisation initiated by UV radiation, using itaconic acid as functional monomer and ethylene dimethacrylate as cross-linker. This resulted in particles with an average size of 249.0±4.0nm which were covalently immobilised onto chromatographic silica beads. The resultant CSP based on the composite silica beads-MIN was capable of resolving the racemate of the antidepressant drug citalopram and also separating its major metabolites by liquid chromatography, with better efficiency and peak symmetry than other MIP based CSP. The methodology presented here allowed for the quantification of the pharmacologically active enantiomer (+)-(S)-citalopram (SCIT) and its main metabolites (+)-(S)-desmethylcitalopram (SDCIT) and (+)-(S)-didesmethylcitalopram (SDDCIT) in urine, registering mean recoveries that ranged from 91.5 to 103.7% with RSD values that were below 10% in all tested concentration levels (0.1, 0.75 and 5µgmL-1), which confirmed method suitability for the intended application.
Assuntos
Cromatografia Líquida/instrumentação , Polímeros/química , Dióxido de Silício/química , Impressão Molecular/métodos , Nanopartículas/química , Polímeros/síntese química , Porosidade , Dióxido de Silício/síntese química , EstereoisomerismoRESUMO
Grapevine and derived products are rich in a wide range of compounds and its quality mainly depends on its metabolites, as a result of viticulture practices. Plant sterols, also called phytosterols (PS), are secondary metabolites regarded as bioactive substance present in grape berries and other plant-based food. The present study deals with a metabolomic approach focusing on phytosterols family in six varieties of Rioja grapes (Cabernet Sauvignon, Tempranillo, Graciano, Garnacha, White Garnacha and Viura), in order to find significant differences among them. Liquid chromatography- mass spectrometry with a quadrupole-time of flight mass analyzer (LC-QTOF) was used to find as many metabolites as possible in the different grape berry fractions, and using statistics to help finding significant clustering of the metabolic profile of pulp, peel and seeds in relation to the variety. The best chromatographic and detection conditions were achieved by gas phase ionization via atmospheric pressure chemical ionization (APCI) in positive mode. Furthermore, analysis with electrospray (ESI) is also needed for phytosterol derivatives confirmation. Putative compounds of interest in the analyzed samples were found by an automated compound extraction algorithm (Molecular Feature Extraction, MFE) and an initial differential expression from the data was created with the aid of commercial software. Once the data were collected, the results were filtered, aligned and normalized, and evaluating applying one-way analysis of variance (ANOVA) with a 95% significance level. For sample class prediction, partial least square-discriminant analysis (PLS-DA) is used as a supervised pattern recognition method and excellent separation among the grape varieties is shown. An overall accuracy of 93.3% (pulp samples), 100.0% (peel) or 96.7% (seeds) in discriminating between grape varieties was achieved when comparing the different fractions. In general, 7 PS derivatives were identified with ID scores higher than 84%.
Assuntos
Cromatografia Líquida/métodos , Metabolômica/métodos , Fitosteróis/análise , Espectrometria de Massas em Tandem/métodos , Vitis/químicaRESUMO
In recent years, Cr speciation in dietary supplements has become decisive in the evaluation of their health risks. Despite being an beneficial micronutrient, Cr(III) can be toxic at living organisms at high concentrations, while Cr(VI) is known to be highly toxic and carcinogenic. The main objective of this work was to optimize an analytical methodology for the extraction and accurate quantification of Cr(III) and Cr(VI) in dietary supplements. The extraction of Cr species was carried out with 50mM EDTA solution on a hotplate under optimized conditions. Special attention was paid to bidirectional species transformations. No noticeable oxidation of Cr(III) into Cr(VI) was observed and the reduction to Cr(III) only occurred at very high Cr(VI) concentrations. Cr(III) as Cr(EDTA)(-) complex was chromatographically separated from Cr(VI), retained as CrO4(2-), on an anion exchange column coupled to inductively coupled plasma mass spectrometry (LC-ICP-MS). The limit of quantification (0.08µgg(-1)) was below the limit established for Cr enriched yeasts by the European Union. Eleven dietary supplements were analyzed and Cr(III) and Cr(VI) quantification was carried out by external calibration monitoring (52)Cr isotope and by speciated isotope dilution mass spectrometry (SIDMS) adding (50)Cr(III) and (53)Cr(VI) spikes. Total Cr was also quantified by ICP-MS and mass balance between total Cr and the sum of Cr(III) and Cr(VI) was achieved. In eight of the eleven tested supplements Cr(III) calculated amounts were higher than those indicated by the manufacturer, but only one of them exceeded the 250µgday(-1) recommended by World Health Organization (WHO). In contrast, it is worth noting that Cr(VI) amounts beyond the recommendations of the European Union for Cr enriched yeasts were found in five supplements. These results revealed that more accurate and rigorous quality assurance protocols should be applied to the testing of the final products, including the analysis of both Cr(III) and Cr(VI).
Assuntos
Suplementos Nutricionais , Cromo , Isótopos do Cromo , Espectrometria de MassasRESUMO
This paper reports the development of stir bars with a new MIP based coating, for the selective sorptive extraction of the herbicide glyphosate (GLYP). Molecular imprinting of the polymer has directly been carried out employing underivatised GLYP as the template molecule. Due to the poor solubility of the target compound in organic solvents, the MIP methodology has been optimised for rebinding in aqueous media, being the synthesis and the rebinding steps carried out in water:methanol mixtures and pure aqueous media. The coating has been developed by radical polymerisation initiated by UV energy, using N-allylthiourea and 2-dimethyl aminoethyl methacrylate as functional monomers and ethylene glycol dimethacrylate as the cross-linker. Mechanical stability of the coating has been improved using 1,3-divinyltetramethyldisiloxane in the polymerisation mixture. Under the optimised conditions, the MIP has demonstrated excellent selectivity for the target compound in the presence of structural analogues, including its major metabolites. The applicability of the proposed method to real matrices has also been assessed using river water and soil samples. Registered mean recoveries ranged from 90.6 to 97.3% and RSD values were below 5% in all cases, what confirmed the suitability of the described methodology for the selective extraction and quantification of GLYP.
Assuntos
Glicina/análogos & derivados , Herbicidas/química , Herbicidas/isolamento & purificação , Impressão Molecular/métodos , Água/química , Glicina/química , Glicina/isolamento & purificação , Glicina/metabolismo , Herbicidas/metabolismo , Compostos Orgânicos/química , Polimerização , Polímeros/química , Rios/química , Siloxanas/química , Solo/química , Solubilidade , Solventes/química , GlifosatoRESUMO
A surface-imprinted chiral stationary phase for the enantiomeric resolution of the antidepressant drug, citalopram, is presented in this work. N, N'-diethylaminodithiocarbamoylpropyl(trimethoxy)silane has been used as silane iniferter for the surface functionalization of the solid silica support. A molecularly imprinted polymer thin film, in the nm scale, was then grafted on the silanized silica using itaconic acid as the functional monomer and ethylene glycol dimethacrylate as the cross-linker in the presence of the template S-citalopram. The total monomer amount was calculated to obtain the desired thickness. Non-imprinted stationary phases were prepared similarly in the absence of S-citalopram. Characterization of the materials was carried out by scanning electron microscopy, thermogravimetric analysis, elemental analysis and Fourier transform infrared spectroscopy. Stationary phases have been applied to the chromatographic separation of the target. Conditions for best chromatographic resolution of the enantiomers were optimized, and it was found that a mobile phase consisting of a mixture of formate buffer (40 mM, pH 3) and acetonitrile (30:70 v/v) at 40 °C provided best results. Binding behaviour of the developed material was finally assessed by batch rebinding experiments. The obtained binding isotherm was fitted to different binding models being the Freundlich-Langmuir model, the one that best fitted the experimental data. The developed material has shown high selectivity for the target enantiomer, and the stationary phase could be undoubtedly exploited for chiral separation of the drug.
Assuntos
Antidepressivos de Segunda Geração/química , Citalopram/química , Polímeros/química , Dióxido de Silício/química , Metacrilatos/química , Microscopia Eletrônica de Varredura , Impressão Molecular , Estrutura Molecular , Porosidade , Espectroscopia de Infravermelho com Transformada de Fourier , Estereoisomerismo , Succinatos/químicaRESUMO
Chronic kidney disease (CKD) is a major epidemiologic problem which causes several disturbances in adults and in pediatrics. Despite being a worldwide public health problem, information available for CKD in the pediatric population is scarce. For that reason, an ion-pair reversed-phase liquid chromatography-quadrupole time-of-flight mass spectrometry (LC-QTOF-MS) method has been developed and validated in order to analyze 16 amino acids, amino acid derivatives, and analogous compounds related to the arginine-creatine metabolic pathway that are suspicious of being increased or decreased in plasma from patients with CKD. The analytical method involved the addition of dithiothreitol, a reducing agent which reduces disulfide and thus giving total aminothiol concentration, as well as a simple precipitation of plasma proteins. Moreover, despite amino acids being usually derivatized to improve their retention time and to enhance their signal, for this method, an ion-pairing reagent was used, thus avoiding the need for derivatization. Subsequently, analysis of plasma from pediatric patients suffering from CKD and control pediatrics was carried out. As a result, glycine, citrulline, creatinine, asymmetric dimethylarginine (ADMA), and symmetric dimethylarginine (SDMA) were significantly increased in patients with CKD, regardless of their creatinine level, whereas in addition to these compounds dimethylglycine was also increased when CKD patients had plasma creatinine concentrations above 12 µg mL(-1), thus all are suggested as potential biomarkers for renal impairment.
Assuntos
Arginina/sangue , Cromatografia Líquida de Alta Pressão/métodos , Creatina/sangue , Espectrometria de Massas/métodos , Metabolômica/métodos , Insuficiência Renal Crônica/sangue , Adolescente , Adulto , Arginina/metabolismo , Biomarcadores/sangue , Criança , Pré-Escolar , Creatina/metabolismo , Feminino , Humanos , Masculino , Insuficiência Renal Crônica/metabolismoRESUMO
A molecularly imprinted polymer (MIP) based methodology is described here for the determination of compounds that belong to the 4-ethylphenol (4EP) metabolic pathway in red wines. To this end, two MIP materials have been developed: a 4EP MIP as a class-selective material to extract phenols that belong to the 4EP metabolic pathway and a coumaric acid (CA) imprinted polymer as a MIP-based stationary phase capable of selectively separating these phenols on HPLC analysis, obtaining clean chromatograms. 4-vinyl pyridine and ethylene glycol dimethacrylate were respectively used as functional monomer and cross-linker for both MIPs. Once polymer compositions were optimised, the 4EP MIP was packed into SPE cartridges for wine sample clean-up and CA MIP was packed into HPLC columns to chromatographically separate the compounds present in the eluates obtained after SPE extraction. The accuracy of the proposed method was tested spiking wine samples with known concentrations of target compounds and subsequently, analytes were quantified by the standard addition method. Registered mean recoveries ranged from 95.2 to 109.2% and RSD values were below 10% in most cases. The described methodology was found to be suitable for the selective extraction and quantification of the compounds that belong to the 4EP metabolic pathway in red wines with minimal matrix effects and could be undoubtedly exploited to monitor 4EP and its precursors in wines.
Assuntos
Metacrilatos/química , Impressão Molecular , Fenóis/metabolismo , Polietilenoglicóis/química , Polivinil/química , Vinho/análise , Cromatografia Líquida de Alta Pressão/métodos , Redes e Vias Metabólicas , Extração em Fase Sólida/métodosRESUMO
The identification of characteristic organic gunshot residues (OGSR) provides conclusive evidence in the elucidation of elemental profiles when lead-free ammunition is fired. OGSR also prevents false negatives. Toward this aim, a quick and efficient method based on liquid chromatography-quadrupole time-of-flight mass spectrometry (LC-QTOF) was developed to detect and identify 18 gunpowder additives in gunshot residues (GSR). The unequivocal identification of target analytes was assured by using MS/MS mode. Swabs were compared with home-modified tape lift supports covered with a PTFE layer to determine the better sampling technique. The modified tape lift provided better extraction recoveries and enabled the analysis of inorganic and organic GSR simultaneously. The developed method was applied to the analysis of GSR from four different lead-free ammunitions. Diphenylamine and its nitrated degradation products and centralites were identified in all samples, providing strong evidence of GSR.
RESUMO
A method based on scanning laser ablation and inductively coupled plasma-mass spectrometry (SLA-ICPMS) and Raman micro-spectroscopy for the detection and identification of compounds consistent with gunshot residue particles (GSR) has been developed. The method has been applied to the characterization of particles resulting from the discharge of firearms using lead-free ammunition. Modified tape lifts were used to collect the inorganic and organic residues from skin surfaces in a single sample. Using SLA-ICPMS, aggregates related to the composition of the ammunition, such as Cu-Zn-Sn, Zr-Sr, Cu-Zn, Al-Ti, or Al-Sr-Zr were detected, but this composition is only consistent with GSR from lead-free ammunitions. Additional evidence was provided by micro-Raman spectroscopy, which identified the characteristic organic groups of the particles as centralite, diphenylamine or their nitrated derivatives, which are indicative of GSR.
Assuntos
Armas de Fogo , Ciências Forenses , Lasers , Espectrometria de Massas/métodos , Metais/química , Pele/química , HumanosRESUMO
This paper reports the application of a chiral imprinted polymer (CIP)-coated stir bar for the selective extraction of (+)-(S)-citalopram (SCIT) and its main metabolites, (+)-(S)-desmethylcitalopram (SDCIT) and (+)-(S)-didesmethylcitalopram (SDDCIT), from urine samples. The developed device has been demonstrated to be capable of selectively extracting the three target analytes from urine samples without saturating the imprinted sites. A CIP-coated stir bar sorptive extraction procedure (CIP-SBSE) is proposed for the isolation of SCIT, SDCIT and SDDCIT followed by their subsequent analysis using liquid chromatography ion trap mass spectrometry (LC-ITMS). Deuterated SCIT-d6 was used as an internal standard. The method was validated using a standard procedure, which revealed that a quantification of 5 ng mL(-1) was obtained in urine samples and that the accuracy and precision were within the established values while no matrix effect was observed.
Assuntos
Antidepressivos de Segunda Geração/urina , Citalopram/análogos & derivados , Citalopram/urina , Polímeros/química , Extração em Fase Sólida/normas , Adsorção , Cromatografia Líquida , Humanos , Impressão Molecular/métodos , Padrões de Referência , Sensibilidade e Especificidade , Extração em Fase Sólida/métodos , Espectrometria de Massas por Ionização por Electrospray , Estereoisomerismo , Espectrometria de Massas em TandemRESUMO
This article reports on the computational design, development and application of a molecularly imprinted polymer (MIP) with specific affinity towards histamine. Computational modelling was used to screen a monomer library in order to select the monomers able to form the strongest complex with the target analyte. These were subsequently used for MIP synthesis by radical polymerisation initiated by UV. MIPs were then evaluated by liquid chromatography and solid phase extraction (SPE) and best MIP behaviour was observed when itaconic acid was used as functional monomer. Finally, after optimisation of the polymer composition, MIPs were used as adsorbents for SPE and clean-up of histamine in wine samples. The proposed histamine extraction method with the MIP-SPE cartridge was found to be reproducible (<5% RSD) and accurate (93-99% recovery) and provided clear wine extracts. The described methodology is simple and fast and is suitable for the selective histamine extraction and its subsequent quantification by HPLC-DAD from complex matrices such as wine samples.
Assuntos
Histamina/isolamento & purificação , Impressão Molecular/métodos , Extração em Fase Sólida/métodos , Vinho/análise , Aminoácidos/química , Cromatografia Líquida de Alta Pressão/métodos , Simulação por Computador , Histamina/análise , Histamina/química , Limite de Detecção , Polímeros/química , Reprodutibilidade dos TestesRESUMO
The aim of this work was to develop a new analytical technique for the study of the organoleptic compounds (flavour profile) of the Graciano Vitis vinifera wine variety. The cv. Graciano is a singular variety of red grapes with its origins in La Rioja and Navarra (northern Spain). This variety transfers an intense red colour, aroma and high acidity to musts and provides greater longevity and, consequently, a better capacity for ageing wine. A new dual-stir bar sorptive extraction approach coupled with thermal desorption (TD) and GC-MS has been used to extract the volatile and semivolatile compounds. In this extraction step, the optimal values for the experimental variables were obtained through the Response Surface Methodology (RSM). Full scan chromatogram data were evaluated with two deconvolution software tools, and the results were compared. The volatile and semivolatile components were identified with an MS match ≥80%. As a result, the flavour metabolome of the Graciano Vitis vinifera wine variety was obtained, and 205 metabolites were identified using different databases. These metabolites were grouped into esters, acids, alcohols, nitrogen compounds, furans, lactones, ketones, aldehydes, phenols, terpenes, norisoprenoids, sulphur compounds, acetals and pyrans. The majority of the metabolites observed had already been reported in the literature; however, this work also identified new, previously unreported metabolites in red wines, which may be characteristic of the Graciano variety.
Assuntos
Técnicas de Química Analítica/métodos , Cromatografia Gasosa-Espectrometria de Massas , Vinho/análise , Bases de Dados de Compostos Químicos , Paladar , Temperatura , Vitis/química , Compostos Orgânicos Voláteis/análiseRESUMO
This work proposes a liquid chromatography-electrospray ionization ion trap mass spectrometry (LC-ESI-ITMS) method, for the quantification of sildenafil (SDF), tadalafil (TDF) and vardenafil (VDF) and their metabolites N-desmethylSDF, O-desethylSDF and N-desethylVDF, preceded by a sample preparation step based on protein and phospholipid elimination. A C8 column (150 mm × 4.6 mm, 5 µm) with ammonium formate (20mM) and acetonitrile as the mobile phase components have been used. This method has been validated, obtaining limits of quantification ranged from 1 to 2.5 ng/mL and 2 to 5 ng/g in serum and brain tissue respectively, while limits of detection ranged from 0.3 to 0.9 ng/mL in serum and 0.6 to 1.9 ng/g in brain tissue. Assay recoveries for low level QC samples were higher than 83% and the matrix effect ranged between 91% and 108% in serum and between 98% and 107% in brain tissue. The method has been applied to the quantification of these compounds in the serum and brain tissue of rats treated intraperitoneally with 10 mg/kg of SDF, TDF or VDF.
Assuntos
Encéfalo/metabolismo , Cromatografia Líquida , Inibidores da Fosfodiesterase 5/sangue , Inibidores da Fosfodiesterase 5/farmacocinética , Espectrometria de Massas por Ionização por Electrospray , Espectrometria de Massas em Tandem , Acetonitrilas/química , Animais , Biotransformação , Calibragem , Carbolinas/sangue , Carbolinas/farmacocinética , Cromatografia Líquida/normas , Remoção de Radical Alquila , Formiatos/química , Imidazóis/sangue , Imidazóis/farmacocinética , Injeções Intraperitoneais , Limite de Detecção , Masculino , Inibidores da Fosfodiesterase 5/administração & dosagem , Piperazinas/sangue , Piperazinas/farmacocinética , Purinas/sangue , Purinas/farmacocinética , Ratos , Ratos Sprague-Dawley , Padrões de Referência , Reprodutibilidade dos Testes , Sensibilidade e Especificidade , Citrato de Sildenafila , Espectrometria de Massas por Ionização por Electrospray/normas , Sulfonas/sangue , Sulfonas/farmacocinética , Tadalafila , Espectrometria de Massas em Tandem/normas , Triazinas/sangue , Triazinas/farmacocinética , Dicloridrato de VardenafilaRESUMO
A new method based on scanning laser ablation and inductively coupled plasma-mass spectrometry (LA-ICPMS) for the detection and identification of gunshot residue (GSR) particles from firearms discharges has been developed. Tape lifts were used to collect inorganic residues from skin surfaces. The laser ablation pattern and ICPMS conditions were optimized for the detection of metals present in GSR, such as (121)Sb, (137)Ba, and (208)Pb. Other isotopes ((27)Al, (29)Si, (31)P, (33)S, (35)Cl, (39)K, (44)Ca, (57)Fe, (60)Ni, (63)Cu, (66)Zn, and (118)Sn) were monitored during the ICPMS analyses to obtain additional information to possibly classify the GSR particles as either characteristic of GSR or consistent with GSR. In experiments with real samples, different firearms, calibers, and ammunitions were used. The performed method evaluation confirms that the developed methodology can be used as an alternative to the standard scanning electron microscopy-energy dispersive spectroscopy (SEM-EDS) technique, with the significant advantage of drastically reducing the analysis time to less than 66 min.
Assuntos
Armas de Fogo , Lasers , Espectrometria de Massas , Metais/análise , Ciências Forenses , Humanos , Pele/químicaRESUMO
A quantitative LC-MS/MS method has been developed for the simultaneous determination of 17 antipsychotic drugs in human postmortem brain tissue. Sample preparation was performed using Hybrid Solid Phase Extraction-Precipitation technology for the removal of endogenous protein and phospholipid interferences. The chromatographic separation was performed for 16 min on a C8 column, which used a gradient elution of formate ammonium and acetonitrile, and a flow rate gradient. Triple quadrupole mass spectrometry was employed to generate tandem mass spectrometric (MS/MS) data of the target analytes to select the ion m/z signals. Quantitation of the analytes was performed by operating in the dynamic multiple reaction monitoring (dMRM) mode using an electrospray ionization interface. Calibration curves prepared in the spiked brain tissue were linear in the range 20-8000 ng/g (r(2)>0.993) for all drugs (except olanzapine). Within- and between-day coefficients of variation were lower than 25% for all drugs at the LOQ. The LOQ in the matrix ranged between 2 ng/g and 80 ng/g. The method was successfully applied to the unequivocal identification and accurate quantification of antipsychotic drugs in human postmortem brain tissues: therefore, this method can be used in forensic investigations.
Assuntos
Antipsicóticos/análise , Química Encefálica , Encéfalo/patologia , Cromatografia Líquida , Toxicologia Forense , Humanos , Mudanças Depois da Morte , Reprodutibilidade dos Testes , Extração em Fase Sólida , Espectrometria de Massas por Ionização por Electrospray , Espectrometria de Massas em TandemRESUMO
This paper reports the design of Molecularly Imprinted Polymers (MIP) with affinity towards (S)-citalopram using computational modeling for the selection of functional monomers and monomer:template ratio. Acrylamide was selected as functional monomer and the final complex functional monomer/template resulted in a 3:1 ratio. The polymer was synthesized by radical polymerization initiated by UV onto magnetic stir-bars in order to obtain a stir bar sorptive extraction (SBSE) device capable of selective enantiomeric recognition. After successful template removal, the parameters affecting the SBSE procedure (sample volume, ionic strength, extraction time and pH) were optimized for the effective rebinding of the target analyte. The resultant chirally imprinted polymer based stir-bar was able to selectively extract (S)-citalopram from a racemic mixture in an aqueous media with high specificity (specificity factor 4) between 25 and 500 µgL(-1). The MIP coated stir-bars can have significance for enantiospecific sample pre-concentration and subsequent analysis without the need for any chiral chromatographic separation.
Assuntos
Fracionamento Químico/instrumentação , Citalopram/análise , Impressão Molecular , Fracionamento Químico/métodos , Simulação por Computador , EstereoisomerismoRESUMO
A stir-bar sorptive extraction (SBSE) method followed by automated thermal desorption (ATD) coupled to gas chromatography-mass spectrometry was optimized for determining trace levels of 18 synthetic fragrances (musks). Using the method developed a retention time locked library is created and converted to a screening database. This homebuilt database can be combined with deconvolution software for the identification of musks. A factorial design was provide to evaluate the main parameters and interactions between the factors affecting the process of SBSE. Operating with de MS-detector in the full-scan mode, high sensitivity with detection limits in the low ng L(-1) range, and good linearity and repeatability were achieved for all musks. The applicability of the method developed was tested in natural waters (surface and groundwater) and wastewater of a plant treatment (WWPT). The results obtained confirmed the usefulness of the proposed method for the determination and unequivocal identification of musks. This approach enables the developed method to be used for routine screening of environmental samples and posterior rapid quantitation of the positive samples.