Industrial workers and bullying: a systematic review and meta-analysis of workplace violence.

Workplace violence is a significant problem in industry, especially among rank-and-file workers, known as "blue-collar workers". This systematic review and meta-analysis aim to evaluate the suitability of the reduced Negative Acts Questionnaire (NAQ-R) as an instrument to measure workplace violence in this type of population and synthesize the results of studies that have used it in different industrial sectors. A systematic review was conducted in accordance with the PRISMA 2020 statement. Publications describing populations of industrial workers were identified and included in the meta-analysis. For meta-analysis, we extracted data that allowed us to estimate the effect size of the included studies. We used a random-effects model to estimate the overall effect size and assessed heterogeneity between studies using the I² statistic. The global effect size test showed that the overall effect size was significantly different from zero (3.00, t=22.28, p<0.001), indicating an overall effect in relation to workplace violence measured by the NAQ-R in industrial workers. Our results support the claim that the NAQ-R is an effective tool for assessing workplace violence among industrial workers. These findings have important implications for practitioners and researchers working in the field of industrial psychology and occupational health.

Preliminary Report on Diet Estimation of Taruka (Hippocamelus antisensis d'Orbigny, 1834) in an Agricultural Area of the Andean Foothills of the Tarapacá Region, Chile.

The success of conservation programs for the taruka (Hippocamelus antisensis d'Orbigny), an endemic and endangered deer, depends on many factors, highlighting anthropogenic and ecological effects. Among the latter, how this herbivore interacts with forage resources is important. The objective of the study was to describe the main attributes of the diet of this deer in rangelands adjacent to agricultural areas of the foothills of the Tarapacá Region, Chile. The botanical composition of the diet (BCD) was determined by microhistology of feces and fecal nitrogen (NF, %) was measured in two contrasting seasons (rainy summer and dry winter). From the BCD and FN, their relative diversity (J) and crude protein percentage were estimated. In the BCD, Medicago sativa dominated (27.6 ± 8.2% vs. 53.9 ± 9.2%, in rainy summer and dry end winter, respectively), followed by herbaceous dicots (46.2 ± 9.4% vs. 19.4 ± 8.7%) and shrubby species (21.5 ± 7.8% vs. 23.4 ± 7.0%), from rangelands. The contribution of grasses and graminoid species was low, not exceeding 3% and 0.4% of the diet, respectively, with no differences between seasons of the year. Intake of horticultural crop species was marginal (1.3 ± 1.3%), being detected only in the wet season. Diet relative diversity was higher during the wet period (0.75 ± 0.07) compared to the dry period (0.58 ± 0.06), since in the first period it was possible to find a greater number of palatable species. There were no significant differences in the FN attributed to the time of the year (average of 1.8 ± 0.19%), which indicates that the diet of this deer would be stable in terms of its protein quality. These FN levels estimate sufficient dietary protein content to satisfy maintenance and early pregnancy, but these could be limiting during late gestation and lactation.

History of Diversification and Adaptation from North to South Revealed by Genomic Data: Guanacos from the Desert to Sub-Antarctica.

The increased availability of quality genomic data has greatly improved the scope and resolution of our understanding of the recent evolutionary history of wild species adapted to extreme environments and their susceptibility to anthropogenic impacts. The guanaco (Lama guanicoe), the largest wild ungulate in South America, is a good example. The guanaco is well adapted to a wide range of habitats, including the Sechura Desert, the high Andes Mountains to the north, and the extreme temperatures and conditions of Navarino Island to the south. Guanacos also have a long history of overexploitation by humans. To assess the evolutionary impact of these challenging habitats on the genomic diversity, we analyzed 38 genomes (∼10 to 16×) throughout their extensive latitudinal distribution from the Sechura and Atacama Desert to southward into Tierra del Fuego Island. These included analyses of patterns of unique differentiation in the north and geographic region further south with admixture among L. g. cacsilensis and L. g. guanicoe. Our findings provide new insights on the divergence of the subspecies ∼800,000 yr BP and document two divergent demographic trajectories and to the initial expansion of guanaco into the more southern portions of the Atacama Desert. Patagonian guanacos have experienced contemporary reductions in effective population sizes, likely the consequence of anthropogenic impacts. The lowest levels of genetic diversity corresponded to their northern and western limits of distribution and some varying degrees of genetic differentiation. Adaptive genomic diversity was strongly linked with environmental variables and was linked with colonization toward the south followed by adaptation.

Properties and environmental sustainability of fungal chitin nanofibril reinforced cellulose acetate films and nanofiber mats by solution blow spinning.

Materials from biological origin composed by renewable carbon facilitate the transition from linear carbon-intensive economy to a sustainable circular economy. Accordingly, we use solution blow spinning to develop fully biobased cellulose acetate films and nanofiber mats reinforced with fungal chitin nanofibrils (ChNFs), an emerging bio-colloid with lower carbon footprint compared to crustacean-derived nanochitin. This study incorporates fungal ChNFs into spinning processes for the first time. ChNF addition reduces film surface roughness, modifies film water affinity, and tailors the nanofiber diameter of the mats. The covalently bonded ß-D-glucans of ChNFs act as a binder to improve the interfacial properties and consequently load transference to enhance the mechanical properties. Accordingly, the Young's modulus of the films increases from 200 ± 18 MPa to 359 ± 99 MPa with 1.5 wt% ChNFs, while the elongation at break increases by ~45 %. Life cycle assessment (LCA) is applied to quantify the environmental impacts of solution blow spinning for the first time, providing global warming potential values of 69.7-347.4 kg·CO2-equiv.·kg-1. Additionally, this work highlights the suitability of ChNFs as reinforcing fillers during spinning and proves the reinforcing effect of mushroom-derived chitin in bio-based films, opening alternatives for sustainable materials development beyond nanocelluloses in the near future.

"Nano in Nano"-Incorporation of ZnO Nanoparticles into Cellulose Acetate-Poly(Ethylene Oxide) Composite Nanofibers Using Solution Blow Spinning.

In this work, the preparation and characterization of composites from cellulose acetate (CA)-poly(ethylene oxide) (PEO) nanofibers (NFs) with incorporated zinc oxide nanoparticles (ZnO-NPs) using solution blow spinning (SBS) is reported. CA-PEO nanofibers were produced by spinning solution that contained a higher CA-to-PEO ratio and lower (equal) CA-to-PEO ratio. Nanoparticles were added to comprise 2.5% and 5% of the solution, calculated on the weight of the polymers. To have better control of the SBS processing conditions, characterization of the spinning suspensions is carried out, which reveals a decrease in viscosity (two- to eightfold) upon the addition of NPs. It is observed that this variation of viscosity does not significantly affect the mean diameters of nanofibers, but does affect the mode of the nanofibers' size distribution, whereby lower viscosity provides thinner fibers. FESEM-EDS confirms ZnO NP encapsulation into nanofibers, specifically into the CA component based on UV-vis studies, since the release of ZnO is not detected for up to 5 days in deionized water, despite the significant swelling of the material and accompanied dissolution of water-soluble PEO. Upon the dissolution of CA nanofibers into acetone, immediate release of ZnO is detected, both visually and by spectrometer. ATR-FTIR studies reveal interaction of ZnO with the CA component of composite nanofibers. As ZnO nanoparticles are known for their bioactivity, it can be concluded that these CA-PEO-ZnO composites are good candidates to be used in filtration membranes, with no loss of incorporated ZnO NPs or their release into an environment.

Non-Woven Fibrous Polylactic Acid/Hydroxyapatite Nanocomposites Obtained via Solution Blow Spinning: Morphology, Thermal and Mechanical Behavior.

Polylactic acid (PLA) is widely used in tissue engineering and other biomedical applications. PLA can be modified with appropriate biocompatible ceramic materials since this would allow tailoring the mechanical properties of the tissues to be engineered. In this study, PLA-based non-woven fibrillar nanocomposites containing nanoparticles of hydroxyapatite (HA), a bioceramic commonly used in bone tissue engineering, were prepared via solution blow spinning (SBS). The compositions of the final materials were selected to study the influence of HA concentration on the structure, morphology, and thermal and mechanical properties. The resulting materials were highly porous and mainly constituted fibers. FTIR analysis did not reveal any specific interactions. The diameters of the fibers varied very little with the composition. For example, slightly thinner fibers were obtained for pure PLA and PLA + 10% HA, with fiber diameters of less than 400 nm, while the thicker fibers were found for PLA + 1% HA, with average diameters of 427 ± 170 nm. The crystallinity and stiffness of the PLA/HA composite increased with the HA content. Further, composites containing PLA fibers with slightly larger diameters were more ductile. Thus, with an appropriate balance between factors, such as the diameter of the solution-blow-spun PLA fibers, HA particle content, and degree of crystallinity, PLA/HA composites may be effectively used in tissue engineering applications.

Effect of Collector Rotational Speed on the Morphology and Structure of Solution Blow Spun Polylactic Acid (PLA).

Apart from structure and composition, morphology plays a significant role in influencing the performance of materials in terms of both bulk and surface behavior. In this work, polylactic acid (PLA) constituted by submicrometric fibers is prepared. Using a modified electrospinning (ES) device to carry out solution blow spinning (SBS), the fibrillar morphology is modified, with the aim to induce variations in the properties of the material. The modification of the ES device consists of the incorporation of a source of pressurized gas (air) and a 3D-printed nozzle of our own design. For this work, the morphology of the PLA submicrometric fibers is modified by varying the rotational speed of the collector in order to understand its influence on different properties and, consequently, on the performance of the material. The rotational speed of a cylindrical collector (250, 500, 1000 and 2000 rpm) is considered as variable for changing the morphology. Morphological study of the materials was performed using scanning electron microscopy and image analysis carried out with ImageJ 1.54f software. Besides a morphology study, structural characterization by Fourier transformed infrared spectroscopy using attenuated total reflectance of prepared materials is carried out. Finally, the morphology and structure of produced PLA fibrous mats were correlated with the analysis of mechanical properties, wettability behavior and adhesion of DH5-α E. coli bacteria. It is of interest to highlight how small morphological and chemical structure variations can lead to important changes in materials' performance. These changes include, for example, those above 30% in some mechanical parameters and clear variations in bacterial adhesion capacity.

What if gastrointestinal complications in endurance athletes were gut injuries in response to a high consumption of ultra-processed foods? Please take care of your bugs if you want to improve endurance performance: a narrative review.

To improve performance and recovery faster, athletes are advised to eat more often than usual and consume higher doses of simple carbohydrates, during and after exercise. Sports energetic supplements contain food additives, such as artificial sweeteners, emulsifiers, acidity regulators, preservatives, and salts, which could be harmful to the gut microbiota and impair the intestinal barrier function. The intestinal barrier plays a critical function in bidirectionally regulation of the selective transfer of nutrients, water, and electrolytes, while preventing at the same time, the entrance of harmful substances (selective permeability). The gut microbiota helps to the host to regulate intestinal homeostasis through metabolic, protective, and immune functions. Globally, the gut health is essential to maintain systemic homeostasis in athletes, and to ensure proper digestion, metabolization, and substrate absorption. Gastrointestinal complaints are an important cause of underperformance and dropout during endurance events. These complications are directly related to the loss of gut equilibrium, mainly linked to microbiota dysbiosis and leaky gut. In summary, athletes must be cautious with the elevated intake of ultra-processed foods and specifically those contained on sports nutrition supplements. This review points out the specific nutritional interventions that should be implemented and/or discontinued depending on individual gut functionality.

Solution blow co-spinning of cellulose acetate with poly(ethylene oxide). Structure, morphology, and properties of nanofibers.

Cellulose acetate (CA) nanofibers are prepared using solution blow co-spinning (SBS) with poly(ethylene oxide) (PEO). The pure CA membranes are obtained by washing water-soluble PEO from the fibrous CA-PEO blend. Nanofibrous membranes are characterized using optical and scanning electron microscopy (SEM), differential scanning calorimetry (DSC), infrared spectroscopy (ATR-FTIR), and surface zeta potential measurements. Thermal transitions from DSC and ATR-FTIR spectra analysis were used to confirm the removal of the PEO. Although the characteristic signals of PEO are not observed by FTIR, an additional thermal step transition in CA nanofibers indicates the embedding of a small amount of PEO (up to 6 wt%). SEM analysis shows that CA-PEO blends are constituted by fibers with mean diameters from 671 to 857 nm (depending on the SBS parameters), while after PEO removal, diameters range from 567 to 605 nm. We propose a new method for staining CA-PEO membranes with iodine solution in absolute ethanol that allows the differentiation of CA and PEO components with an optical microscope. The microscopy results suggest that PEO assists in the spinning by enveloping CA nanofibers, allowing uninterrupted processing. The successful deacetylation to cellulose using an aqueous KOH solution is confirmed with zeta potential measurements and ATR-FTIR.

Solution Blow-Spun Poly (Ethylene Oxide)-Polysulfone Bicomponent Fibers-Characterization of Morphology, Structure, and Properties.

Solution blow spinning was used to prepare nonwoven bicomponent fibers constituted by poly (ethylene oxide)-Polysulfone (PEO-PSF). As a new material, deep characterization was carried out to have a database to understand final performance regarding its multiple functions as a potential material for biomedical applications. The morphology was studied by field emission scanning electron and transmission electron microscopy and optical profilometry. Structural characterization was carried out by Fourier transform infrared spectroscopy and thermal degradation by thermogravimetric analysis. Additionally, wettability and mechanical behavior were studied by contact angle measurements and tensile tests, respectively. The bicomponent material was constituted of fibers with a structure mainly described by a core-shell structure, where the PSF phase is located at the center of the fibers, and the PEO phase is mainly located at the outer parts of the fibers, leading to a kind of shell wall. The study of possible interactions between different phases revealed them to be lacking, pointing to the presence of an interface core/shell more than an interphase. The morphology and roughness of the bicomponent material improved its wettability when glycerol was tested. Indeed, its mechanical properties were enhanced due to the PSF core provided as reinforcement material.

Active Cellulose Acetate/Chitosan Composite Films Prepared Using Solution Blow Spinning: Structure and Electrokinetic Properties.

Cellulose acetate (CA), a very promising derivative of cellulose, has come into the focus of research due to its highly desired good film-forming ability for food packaging applications. Frequently, this derivative is used in combination with other compounds (polymers, nanoparticles) in order to obtain active materials. Here, we report the preparation of thin films made of cellulose acetate loaded with chitosan (CS) using the solution blow spinning (SBS) method. Films are prepared by SBS processing of the polymers mixture solution, considering the following variables: (i) the concentration of cellulose acetate and chitosan in the solution and (ii) the solvent system consisting of acetic or formic acid. The prepared materials are characterized in terms of physical properties, roughness (optical profilometer), porosity, wettability (contact angle measurements), chemical structure (Fourier transform infrared spectrometry), and electrokinetic properties (zeta potential). SBS enables the preparation of CA/CS films with high water vapor permeability, high porosity, and also higher water contact angle compared with pure CA films. The electrokinetic properties of composites are influenced by the inclusion of chitosan, which causes a shift of the isoelectric point (IEP) towards higher pH values, but the magnitude of the shift is not in correlation with chitosan concentration. Adsorption kinetic studies using bovine serum albumin (BSA) as a model protein reveal that chitosan modified cellulose acetate films manifest low affinity towards proteins that suggests prevention of biofilm formation on its surface.

Accuracy of Eye and Hair Color Prediction in Mexican Mestizos from Monterrey City Based on ForenSeqTM DNA Signature Prep.

Forensic genomic systems allow simultaneously analyzing identity informative (iiSNPs), ancestry informative (aiSNPs), and phenotype informative (piSNPs) genetic markers. Among these kits, the ForenSeq DNA Signature prep (Verogen) analyzes identity STRs and SNPs as well as 24 piSNPs from the HIrisPlex system to predict the hair and eye color. We report herein these 24 piSNPs in 88 samples from Monterrey City (Northeast, Mexico) based on the ForenSeq DNA Signature prep. Phenotypes were predicted by genotype results with both Universal Analysis Software (UAS) and the web tool of the Erasmus Medical Center (EMC). We observed predominantly brown eyes (96.5%) and black hair (75%) phenotypes, whereas blue eyes, and blond and red hair were not observed. Both UAS and EMC showed high performance in eye color prediction (p ≥ 96.6%), but a lower accuracy was observed for hair color prediction. Overall, UAS hair color predictions showed better performance and robustness than those obtained with the EMC web tool (when hair shade is excluded). Although we employed a threshold (p > 70%), we suggest using the EMC enhanced approach to avoid the exclusion of a high number of samples. Finally, although our results are helpful to employ these genomic tools to predict eye color, caution is suggested for hair color prediction in Latin American (admixed) populations such as those studied herein, principally when no black color is predicted.

Airbrushed PSF/ZnO Composite Coatings as a Novel Approach for the Consolidation of Historical Bones.

In this work, the preparation and characterization of films based on polysulfone (PSF) filled with zinc oxide, ZnO, nanoparticles (NPs) are conducted. The novelty of this research mainly relies on two points: (i) the use of a commercial airbrush to prepare or modify materials, and (ii) the design of new materials (nanocomposites) for the consolidation and restoration of historical bones. To accomplish these objectives, free-standing thin films and ancient bone coatings of PSF/ZnO nanocomposites with different particle contents (0%, 1%, 2%, 5% and 10%, % wt) are prepared using a commercial airbrush. Mechanical characterization is carried out to correlate properties between free-standing thin films and coatings, thus understanding the final performance of the coatings as consolidants for ancient bones. Thin films of PSF/ZnO show that the elastic modulus (E) increases with particle content. The mechanical behavior of the surfaces of the treated and untreated bones is studied locally using Martens hardness measurements. Maximum values of Martens hardness are obtained for the bone samples treated with polysulfone filled with 1% ZnO nanoparticles (HM = 850 N·mm-2) or 2% ZnO (HM = 625 N·mm-2) compared to those treated just with neat PSF (HM = 282 N·mm-2) or untreated bone (HM = 140 N·mm-2), indicating there is a correspondence between rigidity of free-standing films and hardness of the corresponding coatings. In terms of mechanical performance, it is demonstrated the existence of a balance between nanoparticle concentration and probability of nanoparticle aggregation, which allows better material design for ancient bones consolidation.

Nonwoven Mats Based on Segmented Biopolyurethanes Filled with MWCNT Prepared by Solution Blow Spinning.

To prepare nonwoven mats constituted by submicrometric fibers of thermally responsive biopolyurethanes (TPU) modified with multiwalled carbon nanotubes (MWCNT), solution blow spinning (SBS) was used. The TPU was the product of synthesis using poly(butylene sebacate)diol, PBSD, ethyl ester L-lysine diisocyanate (LDI), and 1,3-propanediol (PD) (PBSe:LDI:PD) as reactants. TPU was modified by adding different amounts of MWCNT (0, 0.5, 1, 2, and 3 wt.%). The effect of the presence and amount of MWCNT on the morphology and structure of the materials was studied using field-emission scanning electron microscopy (FESEM) and Fourier-transform infrared spectroscopy (FTIR), respectively, while their influence on the thermal and electric behaviors was studied using differential scanning calorimetry (DSC) and capacitance measurements, respectively. The addition of MWCNT by SBS induced morphological changes in the fibrous materials, affecting the relative amount and size of submicrometric fibers and, therefore, the porosity. As the MWCNT content increased, the diameter of the fibers increased and their relative amount with respect to all morphological microfeatures increased, leading to a more compact microstructure with lower porosity. The highly porous fibrous morphology of TPU-based materials achieved by SBS allowed turning a hydrophilic material to a highly hydrophobic one. Percolation of MWCNT was attained between 2 and 3 wt.%, affecting not only the electric properties of the materials but also their thermal behavior.

Long-Range Wireless System for U-Value Assessment Using a Low-Cost Heat Flux Sensor.

The present study exposes an economical and easy-to-use system to assess the heat transfer in building envelopes by determining the U-value. Nowadays these systems require long wires and a host to collect and process the data. In this work, a multi-point system for simultaneous heat flux measurement has been proposed. The aim is to reduce the long measurement time and the cost of thermal isolation evaluations in large buildings. The system proposed consists of a low-cost 3D-printed heat flux sensor integrated with a LoRa transceiver and two temperature sensors. The heat flux (HF) sensor was compared and calibrated with a commercial HF sensor from the Fluxteq brand.

Characterization of 58 STRs and 94 SNPs with the ForenSeq™ DNA signature prep kit in Mexican-Mestizos from the Monterrey city (Northeast, Mexico).

BACKGROUND: STR allele frequency databases from populations are necessary to take full advantage of the increased power of discrimination offered by massively parallel sequencing (MPS) platforms. MATERIAL AND METHODS: For this reason, we sequenced 58 STRs (aSTRs, X-STRs, and Y-STRs) and 94 identity informative SNPs (iiSNPs) on 105 Mestizo (admixed) individuals from Monterrey City (Northeast, Mexico), with the Primer Set-A of the ForenSeq™ DNA Signature Prep Kit. RESULTS: Most of the STR markers were in Hardy Weinberg equilibrium, with a few exceptions. We found 346 different length-based alleles for these 58 STRs; nevertheless, they became 528 alleles when the sequence was assessed. The combined power of discrimination from autosomal STRs (aSTRs) was -virtually- 100% in both length and sequence-based alleles, while the power of exclusion was 99.9999999976065 and 99.9999999999494%, respectively. Haplotypes based on X-STRs and Y-STRs showed 100% of discriminatory capacity. CONCLUSIONS: These results provide -for the first time- forensic genomic population data from Mexico necessary for interpretation in kinship and criminal analyses.

Preparation, Properties and Water Dissolution Behavior of Polyethylene Oxide Mats Prepared by Solution Blow Spinning.

The relationship between processing conditions, structure and morphology are key issues to understanding the final properties of materials. For instance, in the case of polymers to be used as scaffolds in tissue engineering, wound dressings and membranes, morphology tuning is essential to control mechanical and wettability behaviors. In this work, the relationship between the processing conditions of the solution blow spinning process (SBS) used to prepare nonwoven mats of polyethylene oxide (PEO), and the structure and morphology of the resulting materials are studied systematically, to account for the thermal and mechanical behaviors and dissolution in water. After finding the optimal SBS processing conditions (air pressure, feed rate, working distance and polymer concentration), the effect of the solvent composition has been considered. The structure and morphology of the blow spun fibers are studied as well as their thermal, mechanical behaviors and dissolution in water. We demonstrate that the morphology of the fibers (size and porosity) changes with the solvent composition, which is reflected in different thermal and mechanical responses and in the dissolution rates of the materials in water.

Airbrushed Polysulfone (PSF)/Hydroxyapatite (HA) Nanocomposites: Effect of the Presence of Nanoparticles on Mechanical Behavior.

Nanocomposite films of polysulfone (PSF)-hydroxyapatite (HA) were prepared with a commercial airbrush. Structural, thermal, and mechanical characterization allows obtaining new information to understand the role of the nanofiller-polymer matrix interphase in the final performance of these materials in relation to its possible applications in the restoration of bones. Fourier-transform infrared spectroscopy shows that there are hardly any structural changes in the polymer when adding HA particles. From thermal analysis (differential scanning calorimetry and thermogravimetry), it can be highlighted that the presence of HA does not significantly affect the glass transition temperature of the PSF but decelerates its thermal degradation. All this information points out that any change in the PSF performance because of the addition of HA particles cannot be due to specific interactions between the filler and the polymer. Results obtained from uniaxial tensile tests indicate that the addition of small amounts of HA particles (1% wt) leads to elastic moduli higher than the upper bound predicted by the rule of mixtures suggesting there must be a high contribution of the interphase. A simple model of the nanocomposite is proposed for which three contributions must be considered, particles, interphase and matrix, in such a way that interphases arising from different particles can interact by combining with each other thus leading to a decrease in its global contribution when the amount of particles is high enough. The mechanical behavior can be explained considering a balance between the contribution of the interphase and the number of particles. Finally, a particular mechanism is proposed to explain why in certain nanocomposites relatively high concentrations of nanoparticles may substantially increase the strain to failure.

Cellulose-Based Nanofibers Processing Techniques and Methods Based on Bottom-Up Approach-A Review.

In the past decades, cellulose (one of the most important natural polymers), in the form of nanofibers, has received special attention. The nanofibrous morphology may provide exceptional properties to materials due to the high aspect ratio and dimensions in the nanometer range of the nanofibers. The first feature may lead to important consequences in mechanical behavior if there exists a particular orientation of fibers. On the other hand, nano-sizes provide a high surface-to-volume ratio, which can have important consequences on many properties, such as the wettability. There are two basic approaches for cellulose nanofibers preparation. The top-down approach implies the isolation/extraction of cellulose nanofibrils (CNFs) and nanocrystals (CNCs) from a variety of natural resources, whereby dimensions of isolates are limited by the source of cellulose and extraction procedures. The bottom-up approach can be considered in this context as the production of nanofibers using various spinning techniques, resulting in nonwoven mats or filaments. During the spinning, depending on the method and processing conditions, good control of the resulting nanofibers dimensions and, consequently, the properties of the produced materials, is possible. Pulp, cotton, and already isolated CNFs/CNCs may be used as precursors for spinning, alongside cellulose derivatives, namely esters and ethers. This review focuses on various spinning techniques to produce submicrometric fibers comprised of cellulose and cellulose derivatives. The spinning of cellulose requires the preparation of spinning solutions; therefore, an overview of various solvents is presented showing their influence on spinnability and resulting properties of nanofibers. In addition, it is shown how bottom-up spinning techniques can be used for recycling cellulose waste into new materials with added value. The application of produced cellulose fibers in various fields is also highlighted, ranging from drug delivery systems, high-strength nonwovens and filaments, filtration membranes, to biomedical scaffolds.

Physical activity, screen time and the COVID-19 school closures in Europe - An observational study in 10 countries.

To date, few data on how the COVID-19 pandemic and restrictions affected children's physical activity in Europe have been published. This study examined the prevalence and correlates of physical activity and screen time from a large sample of European children during the COVID-19 pandemic to inform strategies and provide adequate mitigation measures. An online survey was conducted using convenience sampling from 15 May to 22 June, 2020. Parents were eligible if they resided in one of the survey countries and their children aged 6-18 years. 8395 children were included (median age [IQR], 13 [10-15] years; 47% boys; 57.6% urban residents; 15.5% in self-isolation). Approximately two-thirds followed structured routines (66.4% [95%CI, 65.4-67.4]), and more than half were active during online P.E. (56.6% [95%CI, 55.5-57.6]). 19.0% (95%CI, 18.2-19.9) met the WHO Global physical activity recommendation. Total screen time in excess of 2 h/day was highly prevalent (weekdays: 69.5% [95%CI, 68.5-70.5]; weekend: 63.8% [95%CI, 62.7-64.8]). Playing outdoors more than 2 h/day, following a daily routine and being active in online P.E. increased the odds of healthy levels of physical activity and screen time, particularly in mildly affected countries. In severely affected countries, online P.E. contributed most to meet screen time recommendation, whereas outdoor play was most important for adequate physical activity. Promoting safe and responsible outdoor activities, safeguarding P.E. lessons during distance learning and setting pre-planned, consistent daily routines are important in helping children maintain healthy active lifestyle in pandemic situation. These factors should be prioritised by policymakers, schools and parents. HighlightsTo our knowledge, our data provide the first multi-national estimates on physical activity and total screen time in European children roughly two months after COVID-19 was declared a global pandemic.Only 1 in 5 children met the WHO Global physical activity recommendations.Under pandemic conditions, parents should set pre-planned, consistent daily routines and integrate at least 2-hours outdoor activities into the daily schedule, preferable on each day. Schools should make P.E. lessons a priority. Decision makers should mandate online P.E. be delivered by schools during distance learning. Closing outdoor facilities for PA should be considered only as the last resort during lockdowns.