Remediation of metal-contaminated soils with the addition of materials - part II: leaching tests to evaluate the efficiency of materials in the remediation of contaminated soils.

The effect of the addition of materials on the leaching pattern of As and metals (Cu, Zn, Ni, Pb, and Cd) in two contaminated soils was investigated. The examined materials included bentonites, silicates and industrial wastes, such as sugar foam, fly ashes and a material originated from the zeolitization of fly ash. Soil + material mixtures were prepared at 10% doses. Changes in the acid neutralization capacity, crystalline phases and contaminant leaching over a wide range of pHs were examined by using pH(stat) leaching tests. Sugar foam, the zeolitic material and MX-80 bentonite produced the greatest decrease in the leaching of pollutants due to an increase in the pH and/or the sorption capacity in the resulting mixture. This finding suggests that soil remediation may be a feasible option for the reuse of non-hazardous wastes.

Remediation of metal-contaminated soils with the addition of materials--part I: characterization and viability studies for the selection of non-hazardous waste materials and silicates.

Contamination episodes in soils require interventions to attenuate their impact. These actions are often based on the addition of materials to increase contaminant retention in the soil and to dilute the contaminant concentration. Here, non-hazardous wastes (such as sugar foam, fly ash and a material produced by the zeolitization of fly ash) and silicates (including bentonites) were tested and fully characterized in the laboratory to select suitable materials for remediating metal-contaminated soils. Data from X-ray fluorescence (XRF), N(2) adsorption/desorption isotherms, X-ray diffraction (XRD) and scanning electron microscopy/energy-dispersive X-ray spectroscopy (SEM-EDX) analyses revealed the chemical composition, specific surface area and the phases appearing in the materials. A pH titration test allowed the calculation of their acid neutralization capacity (ANC). The metal sorption and desorption capacities of the waste materials and silicates were also estimated. Sugar foam, fly ash and the zeolitic material were the best candidate materials. Sugar foam was selected because of its high ANC (17000 meq kg(-1)), and the others were selected because of their larger distribution coefficients and lower sorption reversibilities than those predicted in the contaminated soils.

Bacterial immobilization by adhesion onto agave-fiber/polymer foamed composites.

Adhesion of Pseudomonas putida F1 onto agave-fiber/recycled-polyethylene foamed composites was studied under different controlled conditions. The adhesion process was analyzed in batch experiments controlling factors such as pH, contact time, temperature, initial biomass concentration and ionic strength; and was verified by scanning electron microscopy (SEM). The number of adhered bacteria after the experimental time was determined by difference between concentration of suspended cells in NaCl solution contained in two different Erlenmeyer flasks, one of the flasks with composite pellets and the other one without them. The concentration of cells in each flask was obtained using the serial dilution technique. Experimental data analysis showed that adsorption follows first-order kinetics. And it was further corroborated to be an irreversible process. For the first time, an equation is proposed here to predict the correlation between adhered bacteria and aqueous pH. In addition to the obvious reuse of waste material, these results suggested that agave-fiber/polymer foamed composites could be used as support for bacterial immobilization to be applied, among others in environmental processes such as bioremediation and biofiltration of gases with almost limitless possibilities.

pH(stat) vs. single extraction tests to evaluate heavy metals and arsenic leachability in environmental samples.

Here we compared the pH(stat) test, which examines the leachability of major elements (Ca, Mg, Al, Fe, and Mn), dissolved organic carbon, and trace elements (Cd, Zn, Cu, Pb, and As) in a wide pH range, with single extraction tests based on the use of mild extractants (calcium chloride, acetic acid or EDTA). For this purpose, we examined samples from a variety of environmental conditions (sludges, mineral soils, organic soils, and soils with particulate and/or soluble contamination). Extraction yields obtained with CaCl(2) (0.01 mol L(-1)) and CH(3)COOH (0.43 mol L(-1)) correlated well with those from the pH(stat) at the same pH (r=0.98 and 0.95, respectively), while the use of EDTA (0.05 mol L(-1)) led to systematically higher extraction yields than those quantified with the pH(stat) at the same pH. However, the pH(stat) test had three distinct advantages: (1) it revealed the relationship between the solubility of the main soil phases and pH; (2) it showed the variation in pollutant leachability due to changes in pH; and (3) it better predicted the maximum contaminant availability. Thus we propose that the pH(stat) is the best laboratory tests to evaluate the contaminant leachability over a wide range of sample types (soil, sludge, and sediment).