RESUMO
The objective was to evaluate the effect of luting agents and the preparation design on the internal fit of zirconia restorations. Sixty dies were prepared and divided in occlusal convergence angle of 6° (OC6) and 12° (OC12). CAD/CAM zirconia copings were fabricated (Lava All-Ceramic System). A zinc phosphate cement (ZPC); a glass ionomer cement (GIC); and a resin cement (RC) were studied. Specimens were sectioned and coping/die discrepancies were evaluated through Stereoscopic Microscopy. A closer fit was observed in OC12 when compared to OC6 (p < 0.001). For OC6 no significant differences were observed in between ZPC, GIC, and RC (p > 0.05). For OC12, a significantly closer fit was recorded on the ZPC subgroup when compared to the GIC subgroup (p < 0.001). Preparations of 12 degrees demonstrated a closer internal fit when compared to 6 degrees. Preparations of 12 degrees achieved better internal fit values with ZPC (Fortex) followed by RC (RelyX Unicem), and GIC (Ketac Cem). No differences were found when comparing different luting agents over 6° degrees preparations.
RESUMO
BACKGROUND: To evaluate marginal bone loss (MBL) in immediate implant procedures (IIP) placed in conjunction with platelet concentrates (PCs) compared to IIP without PCs. METHODS: A search was performed in four databases. Clinical trials evaluating MBL of IIP placed with and without PCs were included. The random effects model was conducted for meta-analysis. RESULTS: Eight clinical trials that evaluated MBL in millimeters were included. A total of 148 patients and 232 immediate implants were evaluated. The meta-analysis showed a statistically significant reduction on MBL of IIP placed with PCs when compared to the non-PCs group at 6 months (p < 0.00001) and 12 months (p < 0.00001) follow-ups. No statistically significant differences were observed on MBL of IIP when compared PCs + bone graft group vs. only bone grafting at 6 months (p = 0.51), and a significant higher MBL of IIP placed with PCs + bone graft when compared to only bone grafting at 12 months was found (p = 0.03). CONCLUSIONS: MBL of IIP at 6 and 12 months follow-ups is lower when PCs are applied in comparison to not placing PCs, which may lead to more predictable implant treatments in the medium term. However, MBL seems not to diminish when PCs + bone graft are applied when compared to only bone grafting.
RESUMO
OBJECTIVES: To compare the shear bond strength (SBS) of the CAD/CAM material-bracket interface using three surface treatments: following manufacturers' instructions (MI), Monobond Etch & Prime (MEP) and 9.6% hydrofluoric acid plus silane (9.6% HF), after 24 h of water storage (24 h) and 10,000 cycles of thermocycling (TC). MATERIALS AND METHODS: A total of 126 crowns with four identical buccal surfaces were fabricated using seven different CAD/CAM materials: CEREC Blocs unglazed (CBU), CEREC Blocs glazed (CBG), IPS Empress CAD (EMP), IPS e.max CAD (EMA), VITA SUPRINITY PC (SUP), inCoris TZI (TZI) and VITA ENAMIC (ENA). A total of 504 APC Flash-Free (APC FF)-precoated brackets were bonded applying three surface treatments: (1) MI; (2) MEP and (3) 9.6% HF. SBS was performed after 24 h and TC. Results were analyzed by Kruskal-Wallis and Mann-Whitney U tests (p < 0.05). RESULTS: MEP conditioning yielded lower SBS results compared with MI and 9.6% HF for CBG (24 h and TC) and EMA (TC) materials. EMP conditioning with MEP after 24 h obtained lower SBS values compared with MI; however, after TC, SBS was similar to MI group and higher than with 9.6% HF. After TC for TZI ceramic, MI protocol (sandblasting) obtained higher SBS scores than MEP, but similar than 9.6% HF. Treatment of ENA with MI and MEP produced higher results than 9.6% HF after TC. SBS results were similar for CBU and SUP, regardless of the treatment. CONCLUSIONS: Although each CAD/CAM material requires specific surface treatment to obtain the highest SBS of APC FF brackets, the treatment with MEP is a valid orthodontic alternative for most of the materials tested. TC significantly decreased SBS for most of the materials. CLINICAL RELEVANCE: MEP can be considered a valid and promising product to condition most of the CAD/CAM ceramics evaluated for APC FF bracket bonding purposes, allowing a faster and safer procedure.
Assuntos
Colagem Dentária , Braquetes Ortodônticos , Cerâmica , Desenho Assistido por Computador , Porcelana Dentária , Teste de Materiais , Cimentos de Resina , Resistência ao Cisalhamento , Propriedades de SuperfícieRESUMO
In this article by Carlos and colleagues (J Clin Exp Dent. 2019 Feb 1;11(2):e154-61), there is an error in the Material and Methods of the abstract. The correct Material and Methods of the abstract is: Material and Methods: A total of 120 human premolars were randomly divided into two groups (n=60) according to the orthodontic adhesive used: APC Flash-Free Adhesive Coated Appliance System (APC FF) or Transbond PLUS Color Change Adhesive (TP), as control. A SBS test was performed and ARI value for each specimen was also assessed. Results were analyzed by two-way ANOVA and Tukey's Chi-square test (p<0.05).
RESUMO
Conventional implant impression techniques may introduce distortions in the framework that can lead to a lack of accuracy of the prostheses. Misfit between the restoration and the implants facilitates the occurrence of biomechanical failures and prostheses complications due to inadequate stress dissipation. Digital impressions present an alternative to eliminate procedural distortions by improving the fit between the restoration and the implants. Among the different types of digital impressions, photogrammetry has emerged as an alternative for multiple implant impressions. This case report describes photogrammetric technique for a full-arch rehabilitation in All-on-four of a 68-year-old patient with a fixed implant-supported restoration on the mandible. Photogrammetric technique has demonstrated to be a successful digital alternative to conventional multiple-implant impression. Esthetics and function remained stable over a follow-up period of 1 year. No biomechanical or biologic complications were observed.
Assuntos
Implantes Dentários , Técnica de Moldagem Odontológica , Idoso , Desenho Assistido por Computador , Prótese Dentária Fixada por Implante , Humanos , Mandíbula , FotogrametriaRESUMO
BACKGROUND: The aim of this study was to compare the shear bond strength (SBS) of a flash-free and precoated orthodontic adhesive with a compomer orthodontic adhesive before and after thermocycling. The adhesive remnant index (ARI) was also determined for both adhesives. MATERIAL AND METHODS: The adhesive remnant index (ARI) was also determined for both adhesives. Material and Methods: A total of 120 human premolars were randomly divided into two groups (n=60) according to the orthodontic adhesive used: APC Flash-Free Adhesive Coated Appliance System (APC FF) or Transbond PLUS Color Change Adhesive (TP), as control. A SBS test was performed and ARI value for each specimen was also assessed. Results were analyzed by two-way ANOVA and Tukey's Chi-square test (p<0.05). RESULTS: SBS values were significantly influenced by thermocycling (p<0.01). Neither the orthodontic adhesive nor the interaction between adhesive and thermocycling statistically affected SBS results (p>0.05). CONCLUSIONS: APC FF and TP showed similar bond strength results. Thermocycling induced a significant decrease in SBS values for the two adhesives tested, without differences between 10,000 and 20,000 thermal cycles. Moreover, APC FF left less adhesive remnants on the enamel compared to TP. Key words:APC Flash-Free, APC cement, aging, orthodontics, resin cements.
RESUMO
BACKGROUND: Knowing that patients desire reduced duration of local anesthesia, the authors performed a meta-analysis to evaluate the efficacy of phentolamine mesylate (PM) in reducing anesthesia duration and the occurrence of adverse effects. TYPES OF STUDIES REVIEWED: The authors searched studies in 4 electronic databases up to December 18, 2014. For each study, the methodological quality was assessed according to the Cochrane Collaboration's tool for assessing risk of bias. Randomized controlled trials (RCTs) that used PM met the inclusion criteria. RESULTS: Six RCTs met the inclusion criteria and were used to carry out a meta-analysis of the effectiveness of PM and a qualitative analysis of its adverse effects. The use of PM was more effective in reversing the anesthetic effect on the lower lip and tongue than was applying a placebo. Adverse effects reported in the studies were not statistically significant, the most frequent being headache, pain during injection, and postprocedure pain. CONCLUSIONS AND PRACTICAL IMPLICATIONS: Based on limited evidence, PM is effective in reducing the persistence of anesthesia duration on the lower lip and tongue, with infrequent adverse effects of little clinical significance.