Potential of nature-based solutions to reduce antibiotics, antimicrobial resistance, and pathogens in aquatic ecosystems. a critical review.

This comprehensive scientific review evaluates the effectiveness of nature-based solutions (NBS) in reducing antibiotics (ABs), combating antimicrobial resistance (AMR), and controlling pathogens in various aquatic environments at different river catchment levels. It covers conventional and innovative treatment wetland configurations for wastewater treatment to reduce pollutant discharge into the aquatic ecosystems as well as exploring how river restoration and saltmarshes can enhance pollutant removal. Through the analysis of experimental studies and case examples, the review shows NBS's potential for providing sustainable and cost-effective solutions to improve the health of aquatic ecosystems. It also evaluates the use of diagnostic indicators to predict NBS effectiveness in removing specific pollutants such as ABs and AMR. The review concludes that NBS are feasible for addressing the new challenges stemming from human activities such as the presence of ABs, AMR and pathogens, contributing to a better understanding of NBS, highlighting success stories, addressing knowledge gaps, and providing recommendations for future research and implementation.

Toxicity of butylone and its enantiomers to Daphnia magna and its degradation/toxicity potential using advanced oxidation technologies.

Butylone (BTL) is a chiral synthetic cathinone available as a racemate and reported as contaminant in wastewater effluents. However, there are no studies on its impact on ecosystems and possible enantioselectivity in ecotoxicity. This work aimed to evaluate: (i) the possible ecotoxicity of BTL as racemate or its isolated (R)- and (S)- enantiomers using Daphnia magna; and (ii) the efficiency of advanced oxidation technologies (AOTs) in the removal of BTL and reduction of toxic effects caused by wastewaters. Enantiomers of BTL were obtained by liquid chromatography (LC) using a chiral semi-preparative column. Enantiomeric purity of each enantiomer was > 97 %. For toxicity assessment, a 9-day sub-chronic assay was performed with the racemate (at 0.10, 1.0 or 10 µg L-1) or each enantiomer (at 0.10 or 1.0 µg L-1). Changes in morphophysiological, behavioural, biochemical and reproductive endpoints were observed, which were dependent on the form of the substance and life stage of the organism (juvenile or adult). Removal rates of BTL in spiked wastewater (10 µg L-1) treated with different AOTs (ultraviolet, UV; ozonation, O3; and UV/O3) were similar and lower than 29 %. The 48 h D. magna acute toxicity assays demonstrated a reduction in the toxicity of the treated spiked effluents, but no differences were found amongst AOTs treatments. These results warn for the contamination and negative impact of BTL on ecosystems and highlight the need for efficient removal processes.

Combining fungal bioremediation and ozonation for rinse wastewater treatment.

In this work, agricultural rinse wastewater, which is produced during the cleaning of agricultural equipment and constitutes a major source of pesticides, was treated by fungal bioremediation and ozonation, both individually and combined in a two-stage treatment train. Three major pesticides (thiacloprid, chlortoluron, and pyrimethanil) were detected in rinse wastewater, with a total concentration of 38.47 mg C L-1. Comparing both technologies, ozonation in a stirred reactor achieved complete removal of these pesticides (720 min) while proving to be a more effective approach for reducing colour, organic matter, and bacteria. However, this technique produced transformation products and increased toxicity. In contrast, fungal bioremediation in a rotating drum bioreactor attenuated toxicity levels and did not produce such metabolites, but only removed approximately 50 % of target pesticide - hydraulic retention time (HRT) of 5 days - and obtained worse results for most of the general quality parameters studied. This work also includes a preliminary economic assessment of both technologies, revealing that fungal bioremediation was 2 times more cost-effective than ozonation. The treatment train, consisting of a first stage of fungal bioremediation followed by ozonation, was found to be a promising approach as it synergistically combines the advantages of both treatments, achieving high removals of pesticides (up to 100 %) and transformation products, while reducing operating costs and producing a biodegradable effluent. This is the first time that fungal bioremediation and ozonation technologies have been compared and combined in a treatment train to deal with pesticides in agricultural rinse wastewater.

Nanofiltration combined with ozone-based processes for the removal of antineoplastic drugs from wastewater effluents.

Over the past years, there has been an increasing concern about the occurrence of antineoplastic drugs in water bodies. The incomplete removal of these pharmaceuticals from wastewaters has been confirmed by several scientists, making it urgent to find a reliable technique or a combination of techniques capable to produce clean and safe water. In this work, the combination of nanofiltration and ozone (O3)-based processes (NF + O3, NF + O3/H2O2 and NF + O3/H2O2/UVA) was studied aiming to produce clean water from wastewater treatment plant (WWTP) secondary effluents to be safely discharged into water bodies, reused in daily practices such as aquaculture activities or for recharging aquifers used as abstraction sources for drinking water production. Nanofiltration was performed in a pilot-scale unit and O3-based processes in a continuous-flow column. The peroxone process (O3/H2O2) was considered the most promising technology to be coupled to nanofiltration, all the target pharmaceuticals being removed at an extent higher than 98% from WWTP secondary effluents, with a DOC reduction up to 92%. The applicability of the clean water stream for recharging aquifers used as abstraction sources for drinking water production was supported by a risk assessment approach, regarding the final concentrations of the target pharmaceuticals. Moreover, the toxicity of the nanofiltration retentate, a polluted stream generated from the nanofiltration system, was greatly decreased after the application of the peroxone process, which evidences the positive impact on the environment of implementing a NF + O3/H2O2 process.

Antibiotics removal from aquaculture effluents by ozonation: chemical and toxicity descriptors.

Antibiotics are often applied in aquaculture to prevent fish diseases. These substances can cause disturbances on receiving waters, when not properly eliminated from the aquaculture effluents. In this work, ozone (O3) was investigated as a possible oxidizing agent to remove fishery antibiotics from aquaculture effluents: florfenicol (FF), oxytetracycline (OTC), sulfadimethoxine (SDM), sulfamethoxazole (SMX), and trimethoprim (TMP). Batch experiments were performed using ultrapure water and aquaculture effluents spiked with a mixture of target antibiotics at relatively high concentrations (10 mg L-1 each). OTC, SMX and TMP were fully removed (< 30 min) regardless of the tested conditions, mainly by O3 direct attack. In contrast, FF was partially removed in 30 min (∼ 10 and 60%, in aquaculture effluents and ultrapure water, respectively), but only in the presence of hydroxyl radicals (HO•), the FF concentrations reaching levels below the detection limits in ultrapure water after 60 min. In the case of SDM, its degradation was highly influenced by the selected water matrix, but with removals always higher than 68%. In continuous-flow experiments applying more environmentally relevant antibiotic concentrations (100 ng L-1 each) and low O3 doses (1.5 mg L-1), ozonation highly removed (> 98%) all tested antibiotics from aquaculture effluents with a hydraulic retention time (HRT) of 10 min, except FF (68%). Although by-products were detected in treated samples, zebrafish (Danio rerio) embryotoxicity tests did not show a toxicity increase by applying this ozonation treatment. Ozonation is thus a possible solution to remove antibiotics from aquaculture effluents. Still, full-scale studies in aquaculture farms are needed, and generation of HO• may be favoured to readily oxidize the FF antibiotic.

Advanced oxidation technologies and constructed wetlands in aquaculture farms: What do we know so far about micropollutant removal?

Aquaculture is the fastest growing animal food-producing sector. Water is the central resource for aquaculture, and it is essential that its quality be preserved. Micropollutants (MPs) can reach aquaculture through anthropogenic addition or inlet water, and may cause harmful effects such as endocrine disruption and antibiotic resistance, adversely affecting the fish species being farmed. Furthermore, the discharge of aquaculture effluents into the environment may contribute to the deterioration of water courses. In this sense, the implementation of environmentally responsible measures in aquaculture farms is imperative for the protection of ecosystems and human health. The European Commission (EC) has recently launched a guiding document promoting ecological aquaculture practices; however, options for water treatment are still lacking. Conventional processes are not designed to deal with MPs; this review article consolidates relevant information on the application of advanced oxidation technologies (AOTs) and constructed wetlands (CWs) as potential strategies in this regard. Although 161 studies on the application of AOTs or CWs in aquaculture have already been published, only 34 focused on MPs (28 on AOTs and 6 on CWs), whereas the others reported the removal of contaminants such as bacteria, organic matter, solids and inorganic ions. No study coupling both treatments has been reported to date for the removal of MPs from aquaculture waters. AOTs and CWs are prospective alternatives for the treatment of aquacultural aqueous matrices. However, the type of aquaculture activity and the specifications of these available technologies should be considered while selecting the most suitable treatment option.

Quenchers in advanced oxidation technologies for analysis of micropollutants by liquid chromatography coupled to mass spectrometry: Sodium sulphite or catalase?

This work aimed to investigate the possible effect of 2 quenchers commonly used in H2O2-based advanced oxidation technologies (AOTs), i.e. catalase and sodium sulphite (Na2SO3), on the analytical signal of 3 detectors coupled to liquid chromatography (LC): tandem mass spectrometry (LC-MS/MS), fluorescence detection (LC-FD) and LC-diode array detection (LC-DAD). The observation of analytical interferences for a group of compounds when studying the removal by continuous mode UV/H2O2 of 26 micropollutants (MPs) from a spiked surface water (SW), for which the residual H2O2 in the samples was quenched by Na2SO3, triggered the need of understanding these effects and thus catalase was used as comparative quencher. From the 26 MPs having a wide range of polarity and pKa, those monitored after electrospray ionization (ESI) under positive ionization (PI) mode and presenting a pKa higher than 5.9 revealed a great signal suppression, but only when using Na2SO3 as H2O2 quencher. In this sense, we further explored this effect by selecting 2 MPs, metoprolol and diclofenac, which had respectively signal suppression and no interference in the LC-MS/MS response. These MPs were analysed before and after addition of H2O2 and catalase or Na2SO3 in reaction vials, using: (i) different detectors coupled to LC, namely LC-MS/MS with ESI under PI and negative ionization (NI) modes, LC-FD and LC-DAD; (ii) different environmental matrices (SW, drinking water, wastewater) and ultrapure water; and (iii) different magnitude levels (0.1-10 mg L-1). The results demonstrated a remarkable signal suppression in LC-MS/MS analyses under PI mode for those compounds with pKa higher than 5.9, confirming the interfering effect of H2O2/Na2SO3. To the best of our knowledge, the analytical interference in the LC-MS/MS analysis, after adding Na2SO3 to quench H2O2 in AOTs experiments was never reported before and the results presented herein support the recommendation to use catalase instead of Na2SO3 as quencher in AOTs studies.

Constructed wetland microcosms for the removal of organic micropollutants from freshwater aquaculture effluents.

The presence of organic micropollutants (MPs) in the aquatic environment is strongly related to their difficult elimination by conventional water and wastewater treatment processes. Therefore, alternative treatment technologies are required to overcome this problem. In this domain, constructed wetlands (CWs) have gained increasing attention in the last years, mainly due to the low-cost, simple operation/maintenance and environmental friendliness of these systems. However, studies on the application of CWs to remove MPs from freshwater aquaculture effluents are still scarce. In this work, planted (Phragmites australis) vertical subsurface flow CWs, at microcosm scale, were investigated for the removal of MPs found in non-spiked freshwater aquaculture effluents, namely atrazine, isoproturon, perfluorooctanesulfonic acid (PFOS), clarithromycin, erythromycin, fluoxetine, norfluoxetine, and 2-ethylhexyl-4-methoxycinnamate (EHMC). A wider multi-component set of 36 MPs was also studied by adding these MPs at 100 ng L-1 to the same matrix (alachlor, atrazine, chlorfenvinphos, isoproturon, PFOS, azithromycin, clarithromycin, erythromycin, diclofenac, methiocarb, acetamiprid, clothianidin, thiacloprid, thiamethoxam, EHMC, simazine, atorvastatin, bezafibrate, carbamazepine, cephalexin, ceftiofur, citalopram, clindamycin, clofibric acid, diphenhydramine, enrofloxacin, fluoxetine, ketoprofen, metoprolol, norfluoxetine, ofloxacin, propranolol, tramadol, trimethoprim, venlafaxine, and warfarin). High weekly removal efficiencies (>87%) were observed for all MPs in both non-spiked and spiked experiments, with the exception of EHMC (removal rates between 0 and 86%). These results emphasize the potential of CWs to remove MPs from freshwater aquaculture effluents, but also the need to enhance the performance of these systems for the elimination of some recalcitrant MPs, such as EHMC, which was found at high concentrations in the studied effluents.

A review on the application of constructed wetlands for the removal of priority substances and contaminants of emerging concern listed in recently launched EU legislation.

The presence of organic pollutants in the aquatic environment, usually found at trace concentrations (i.e., between ng L-1 and µg L-1 or even lower, known as micropollutants), has been highlighted in recent decades as a worldwide environmental concern due to their difficult elimination by conventional water and wastewater treatment processes. The relevant information on constructed wetlands (CWs) and their application for the removal of a specific group of pollutants, 41 organic priority substances/classes of substances (PSs) and 8 certain other substances with environmental quality standards (EQS) listed in Directive 2013/39/EU as well as 17 contaminants of emerging concern (CECs) of the Watch List of Decision 2015/495/EU, is herein reviewed. Studies were found for 24 PSs and 2 other substances with EQS: octylphenol, nonylphenol, perfluorooctane sulfonic acid, di(2-ethylhexyl)phthalate, trichloromethane, dichloromethane, 1,2-dichloroethane, pentachlorobenzene, benzene, polychlorinated dibenzo-p-dioxins, naphthalene, fluoranthene, trifluralin, alachlor, isoproturon, diuron, tributyltin compounds, simazine, atrazine, chlorpyrifos (chlorpyrifos-ethyl), chlorfenvinphos, hexachlorobenzene, pentachlorophenol, endosulfan, dichlorodiphenyltrichloroethane (or DDT) and dieldrin. A few reports were also published for 8 CECs: imidacloprid, erythromycin, clarithromycin, azithromycin, diclofenac, estrone, 17-beta-estradiol and 17-alpha-ethinylestradiol. No references were found for the other 17 PSs, 6 certain other substances with EQS and 9 CECs listed in EU legislation.