Formation of Nanoscale Protrusions on Polymer Films after Atomic Oxygen Exposure: Observations with Positron Annihilation Lifetime Spectroscopy.

Atomic oxygen (AO) is one of the dominant components of the residual atmosphere in low Earth orbit. AO collides with spacecraft with a translational energy of 5 eV, forming nanoscale protrusions on polymeric materials. To clarify the influences of a polymer's chemical structure on the formation of AO-induced microstructures, this study investigated the size of free-volume holes and the layer thickness that interacted with AO for polyethylene (PE), polypropylene (PP), and polystyrene (PS) by positron annihilation lifetime spectroscopy. The injection energies of positrons varied from 1.3 to 10 keV to adjust the injection depth (range) into the polymers (40 nm-1.6 µm). For the pristine films, the lifetime of ortho-positronium (o-Ps, τ3) was longer in the order of PS, PP, and PE regardless of the injection energy of positrons, showing the different sizes of free-volume holes with radii of 0.29, 0.31, and 0.32 nm, respectively. The fraction of the decay component corresponding to o-Ps in all decay components (relative intensity of o-Ps, I3) was used to investigate the chemical change induced by AO exposure. The I3 values for the three polymers were decreased by AO exposure of (2-5) × 1018 atoms/cm2 or more at a depth of 40-48 nm, obtained by 1.3 keV positrons. This indicates that AO formed polar groups (i.e., an oxidized layer) on the polymer surfaces. The maximum depths of such chemical change for PE and PP were deeper than that for PS. The different sizes of free-volume holes would affect the diffusion or ballistic penetration of AO, resulting in the difference in the oxidized layers' thicknesses and surface morphologies.

Formation of Nanoscale Protrusions on Polymer Films after Atomic Oxygen Irradiation: Changes in Morphologies, Masses, and FT-IR Spectra.

Atomic oxygen (AO) is the main component of the residual atmosphere in a low Earth orbit. AO with a translational energy of 5 eV colliding with artificial satellites forms nano- and microscale protrusions on polymeric materials. This study investigated the influences of AO (fluence and velocity distribution) and a polymer's chemical structure on such surface morphologies. The correlations between samples' mass losses and positions in the irradiation field of an AO beam were analyzed with polyimide (Kapton) films, a standard reference material for AO fluence measurements. The characterizations of polyethylene (PE), polypropylene (PP), and polystyrene (PS) films were studied using gel permeation chromatography and X-ray diffraction. The sample surfaces were observed using a field emission scanning electron microscope. Nanoscale protrusions were formed on all the samples and were larger but fewer with increasing AO fluence. The numerical density of protrusions formed on PE and PP was lower than that on PS. However, the erosion yields and functional groups of PE, PP, and PS were similar per FT-IR spectra.

Deciphering the colonic fermentation characteristics of agavin and digestion-resistant maltodextrin in a simulated batch fermentation system.

Gut microbial fermentation of soluble dietary fibers promotes general and substrate-specific health benefits. In this study, the fermentation characteristics of two soluble branched-dietary fibers, namely, agavin (a type of agave fructans) and digestion-resistant maltodextrin (RD) were investigated against cellulose, using a simulated colonic fermenter apparatus employing a mixed culture of swine fecal bacteria. After 48 h of complete fermentation period, the microbial composition was different among all groups, where Bifidobacterium spp. and Lactobacillus spp. dominated the agavin treatment, while the members of the families Lachnospiraceae and Prevotellaceae dominated the RD treatment. Agavin treatment exhibited a clearly segregated two-phased prolonged fermentation trend compared to RD treatment as manifested by the fermentation rates. Further, the highest short-chain fatty acids production even at the end of the fermentation cycle, acidic pH, and the negligible concentration of ammonia accumulation demonstrated favorable fermentation attributes of agavin compared to RD. Therefore, agavin might be an effective and desirable substrate for the colonic microbiota than RD with reference to the expressed microbial taxa and fermentation attributes. This study revealed a notable significance of the structural differences of fermentable fibers on the subsequent fermentation characteristics.

Cross Talk Mechanism among EMT, ROS, and Histone Acetylation in Phorbol Ester-Treated Human Breast Cancer MCF-7 Cells.

Epithelial-mesenchymal transition (EMT) plays a pivotal role in the progression of cancer, and some transcription factors including Slug and Snail are known to be involved in EMT processes. It has been well established that the excess production of reactive oxygen species (ROS) and epigenetics such as DNA methylation and histone modifications participate in carcinogenesis; however, the cross talk mechanism among EMT, ROS, and epigenetics remains unclear. In the present study, we demonstrated that the treatment of human breast cancer MCF-7 cells with phorbol ester (TPA), a protein kinase C activator, significantly induced cell proliferation and migration, and these were accompanied by the significant induction of Slug expression. Moreover, the TPA-elicited induction of Slug expression was regulated by histone H3 acetylation and NADPH oxidase (NOX) 2-derived ROS signaling, indicating that ROS and histone acetylation are involved in TPA-elicited EMT processes. We herein determined the cross talk mechanism among EMT, ROS, and histone acetylation, and our results provide an insight into the progression of cancer metastasis.