RESUMO
Magnetosomes represent biogenic, magnetic nanoparticles biosynthesized by magnetotactic bacteria. Subtle biological control on each step of biomineralization generates core-shell nanoparticles of high crystallinity, strong magnetization and uniform shape and size. These features make magnetosomes a promising alternative to chemically synthesized nanoparticles for many applications in the biotechnological and biomedical field, such as their usage as biosensors in medical diagnostics, as drug-delivery agents, or as contrast agents for magnetic imaging techniques. Thereby, the particles are directly applied to mammalian cells or even injected into the body. In the present work, we provide a comprehensive characterization of isolated magnetosomes as potential cytotoxic effects and particle uptake have not been well studied so far. Different cell lines including cancer cells and primary cells are incubated with increasing particle amounts, and effects on cell viability are investigated. Obtained data suggest a concentration-dependent biocompatibility of isolated magnetosomes for all tested cell lines. Furthermore, magnetosome accumulation in endolysosomal structures around the nuclei is observed. Proliferation rates are affected in the presence of increasing particle amounts; however, viability is not affected and doubling times can be restored by reducing the magnetosome concentration. In addition, we evidence magnetosome-cell interactions that are strong enough to allow for magnetic cell sorting. Overall, our study not only assesses the biocompatibility of isolated magnetosomes, but also evaluates effects on cell proliferation and the fate of internalized magnetosomes, thereby providing prerequisites for their future in vivo application as biomedical agents.
RESUMO
In chronic myelogenous leukemia (CML), treatment with tyrosine kinase inhibitors (TKI) is unable to eradicate leukemic stem cells (LSC). Polymethine dye-functionalized nanoparticles can be internalized by specific cell types using transmembrane carrier proteins. In this study we investigated the uptake behavior of various polymethine dyes on leukemia cell lines and searched for carrier proteins that guide dye transport using RNA interference. The results show that the uptake of DY-635 is dependent on organic anion transport protein 1B3 (OATP1B3) in CML cells and immature myeloid precursor cells of CML patients. In contrast to nonspecific poly(lactide-co-glycolic acid) (PLGA) nanoparticle constructs, DY-635-functionalization of nanoparticles led to an uptake in CML cells. Investigation of these nanoparticles on bone marrow of CML patients showed a preferred uptake in LSC. The transcription of OATP1B3 is known to be induced under hypoxic conditions via the hypoxia-inducing factor 1 alpha (HIF1α), thus also in the stem cells niche. Since these cells have the potential to repopulate the bone marrow after CML treatment discontinuation, eliminating them by means of drug-loaded DY-635-functionalized PLGA nanoparticles deployed as a selective delivery system to LSC is highly relevant to the ongoing search for curative treatment options for CML patients.
RESUMO
Magnetite (Fe3O4) particles with a diameter around 10 nm have a very low coercivity (Hc) and relative remnant magnetization (Mr/Ms), which is unfavorable for magnetic fluid hyperthermia. In contrast, cobalt ferrite (CoFe2O4) particles of the same size have a very high Hc and Mr/Ms, which is magnetically too hard to obtain suitable specific heating power (SHP) in hyperthermia. For the optimization of the magnetic properties, the Fe2+ ions of magnetite were substituted by Co2+ step by step, which results in a Co doped iron oxide inverse spinel with an adjustable Fe2+ substitution degree in the full range of pure iron oxide up to pure cobalt ferrite. The obtained magnetic nanoparticles were characterized regarding their structural and magnetic properties as well as their cell toxicity. The pure iron oxide particles showed an average size of 8 nm, which increased up to 12 nm for the cobalt ferrite. For ferrofluids containing the prepared particles, only a limited dependence of Hc and Mr/Ms on the Co content in the particles was found, which confirms a stable dispersion of the particles within the ferrofluid. For dry particles, a strong correlation between the Co content and the resulting Hc and Mr/Ms was detected. For small substitution degrees, only a slight increase in Hc was found for the increasing Co content, whereas for a substitution of more than 10% of the Fe atoms by Co, a strong linear increase in Hc and Mr/Ms was obtained. Mössbauer spectroscopy revealed predominantly Fe3+ in all samples, while also verifying an ordered magnetic structure with a low to moderate surface spin canting. Relative spectral areas of Mössbauer subspectra indicated a mainly random distribution of Co2+ ions rather than the more pronounced octahedral site-preference of bulk CoFe2O4. Cell vitality studies confirmed no increased toxicity of the Co-doped iron oxide nanoparticles compared to the pure iron oxide ones. Magnetic heating performance was confirmed to be a function of coercivity as well. The here presented non-toxic magnetic nanoparticle system enables the tuning of the magnetic properties of the particles without a remarkable change in particles size. The found heating performance is suitable for magnetic hyperthermia application.
RESUMO
The inevitable formation of a protein corona upon contact of nanoparticles with different biological fluids is of great interest in the context of biomedical applications. It is well established that the surface chemistry of the respective nanomaterial has tremendous impact on protein adsorption, both in terms of the actual amount as well as the type of proteins adsorbed. In that regard, especially polyzwitterions are discussed as coating materials as they are known to partially inhibit protein adsorption. We herein present comparative incubation studies on iron oxide nanoparticles (either single core (SPION) or multicore nanoparticles (MCNP)) after coating with either polyanionic or polyzwitterionic polymeric shells based on polydehydroalanine (PDha). Apart from varying surface charge and chemistry, also the influence of incubation time and temperature on the formation and composition of a protein corona upon exposure to fetal calf serum was investigated. The amounts of adsorbed biomolecules were determined using thermogravimetric analysis. SDS-PAGE experiments revealed information on protein composition as major components of the biomolecule corona. Our results show that distinctly lower amounts of proteins are adsorbed onto polyzwitterionic hybrid nanoparticles in general, but also the corona composition varies as indicated by elevated relative ratios of medium molecular weight proteins (i.e. proteins 25-100 kDa) estimated by non-specific silver protein staining. In addition, increasing relative amounts of albumin (67 kDa) via specific Western blot assays on PDha-coated MCNP are detected.
Assuntos
Nanopartículas de Magnetita/química , Coroa de Proteína/metabolismo , Soro/química , Animais , Bovinos , Peso Molecular , Propriedades de SuperfícieRESUMO
Magnetic nanoparticles are interesting tools for biomedicine. Before application, critical prerequisites have to be fulfilled. An important issue is the contact and interaction with biological barriers such as the blood-placenta barrier. In order to study these processes in detail, suitable in vitro models are needed. For that purpose a blood-placenta barrier model based on the trophoblast-like cell line BeWo and primary placenta-derived pericytes was established. This model was characterized by molecular permeability, transepithelial electrical resistance and cell-cell-contact markers. Superparamagnetic iron oxide nanoparticles (SPIONs) with cationic, anionic or neutral surface charge were applied. The localization of the nanoparticles within the cells was illustrated by histochemistry. The time-dependent passage of the nanoparticles through the BeWo/pericyte barrier was measured by magnetic particle spectroscopy and atomic absorption spectroscopy. Cationically coated SPIONs exhibited the most extensive interaction with the BeWo cells and remained primarily in the BeWo/pericyte cell layer. In contrast, SPIONs with neutral and anionic surface charge were able to pass the cell layer to a higher extent and could be detected beyond the barrier after 24 h. This study showed that the mode of SPION interaction with and passage through the in vitro blood-placenta barrier model depends on the surface charge and the duration of treatment.
RESUMO
Protein-coated magnetic nanoparticles are promising candidates for various medical applications. Prior to their application into a biological system, one has to guarantee that the particle dispersions are free from pathogens or any other microbiologic contamination. Furthermore, to find entrance into clinical routine, the nanoparticle dispersions have to be storable for several months. In this study, we tested several procedures for sterilization and preservation of nanoparticle containing liquids on their influence on the integrity of the protein coating on the surface of these particles. For this, samples were treated by freezing, autoclaving, lyophilization, and ultraviolet (UV) irradiation, and characterized by means of dynamic light scattering, determination of surface potential, and gel electrophoresis afterwards. We found that the UV sterilization followed by lyophilization under the addition of polyethylene glycol are the most promising procedures for the preparation of sterilized long-term durable protein-coated magnetic nanoparticles. Ongoing work is focused on the optimization of used protocols for UV sterilization and lyophilization for further improvement of the storage time.
RESUMO
Dectin-1 is recognized as a major receptor for fungal ß-glucans and contributes to anti-fungal immunity. Human monocyte populations express Dectin-1 isoforms A and B, which differ by the presence of a stalk region and its N-linked glycosylation site. Here, we analyzed the expression of both isoforms in human monocyte-derived cells. The cellular localization on cell lines stably expressing either Dectin-1 isoform A or B was studied by flow cytometry and confocal laser scanning microscopy. Intracellular protein signaling and cytokine production were analyzed by immunoblotting and cytometric bead array, respectively. Monocyte-derived cells showed cell type-specific expression of the two isoforms. Glycosylated Dectin-1 isoform A was predominantly localized at the cell surface, non-glycosylated isoform B was retained intracellularly. Inhibition of glycosylation resulted in efficient abrogation of cell surface expression of isoform A. Signaling quality following Dectin-1 stimulation was reduced in isoform B cells. Differential isoform specific cytokine secretion was observed by cytometric bead array. We show here that n-glycosylation of Dectin-1 is crucial for its cell surface expression and consequently signal transduction. Taken together, unique cytokine secretion and varying expression levels of human Dectin-1 isoforms on monocyte-derived cells may indicate distinct isoform usage as a cell type-specific mechanism of regulating anti-fungal immunity.
Assuntos
Lectinas Tipo C/metabolismo , Monócitos/metabolismo , Micoses/imunologia , Transdução de Sinais , Linhagem Celular , Citocinas/biossíntese , Citocinas/imunologia , Citometria de Fluxo , Glicosilação , Humanos , Peptídeos e Proteínas de Sinalização Intracelular/metabolismo , Lectinas Tipo C/química , Lectinas Tipo C/genética , Macrófagos/imunologia , Proteínas de Membrana/genética , Proteínas de Membrana/imunologia , Microscopia Confocal , Monócitos/imunologia , Monócitos/fisiologia , Micoses/metabolismo , Isoformas de Proteínas/química , Isoformas de Proteínas/metabolismoRESUMO
This study presents the synthesis and characterization of zwitterionic core-shell hybrid nanoparticles consisting of a core of iron oxide multicore nanoparticles (MCNPs, γ-Fe2 O3 ) and a shell of sultonated poly(2-vinylpyridine-grad-acrylic acid) copolymers. The gradient copolymers are prepared by reversible addition fragmentation chain transfer polymerization of 2-vinylpyridine (2VP), followed by the addition of tert-butyl acrylate and subsequent hydrolysis. Grafting of P(2VP-grad-AA) onto MCNP results in P(2VP-grad-AA)@MCNP, followed by quaternization using 1,3-propanesultone-leading to P(2VPS -grad-AA)@MCNP with a zwitterionic shell. The resulting particles are characterized by transmission electron microscopy, dynamic light scattering, and thermogravimetric analysis measurements, showing particle diameters of ≈70-90 nm and an overall content of the copolymer shell of ≈10%. Turbidity measurements indicate increased stability toward secondary aggregation after coating if compared to the pristine MCNP and additional cytotoxicity tests do not reveal any significant influence on cell viability.
Assuntos
Resinas Acrílicas/química , Compostos Férricos/química , Nanopartículas/química , Polivinil/química , Resinas Acrílicas/síntese química , Estrutura Molecular , Tamanho da Partícula , Polivinil/síntese química , Propriedades de SuperfícieRESUMO
The protein corona, which immediately is formed after contact of nanoparticles and biological systems, plays a crucial role for the biological fate of nanoparticles. In the here presented study we describe a strategy to control the amount of corona proteins which bind on particle surface and the impact of such a protein corona on particle-cell interactions. For corona formation, polyethyleneimine (PEI) coated magnetic nanoparticles (MNP) were incubated in a medium consisting of fetal calf serum (FCS) and cell culture medium. To modulate the amount of proteins bind to particles, the composition of the incubation medium was varied with regard to the FCS content. The protein corona mass was estimated and the size distribution of the participating proteins was determined by means of sodium dodecyl sulfate polyacrylamide gel electrophoresis (SDS-PAGE). Additionally, the zeta potential of incubated particles was measured. Human blood-brain barrier-representing cell line HBMEC was used for in vitro incubation experiments. To investigate the consequences of the FCS dependent protein corona formation on the interaction of MNP and cells flow cytometry and laser scanning microscopy were used. Zeta potential as well as SDS-PAGE clearly reveal an increase in the amount of corona proteins on MNP with increasing amount of FCS in incubation medium. For MNP incubated with lower FCS concentrations especially medium-sized proteins of molecular weights between 30kDa and 100kDa could be found within the protein corona, whereas for MNP incubated within higher FCS concentrations the fraction of corona proteins of 30kDa and less increased. The presence of the protein corona reduces the interaction of PEI-coated MNP with HBMEC cells within a 30min-incubation.
Assuntos
Células Endoteliais/metabolismo , Nanopartículas/química , Coroa de Proteína/química , Coroa de Proteína/metabolismo , Humanos , Tamanho da Partícula , Polietilenoimina/química , Propriedades de SuperfícieRESUMO
A new approach toward the fabrication of biocompatible composites suitable for remote melting is presented. It is shown that magnetite nanoparticles (MNP) can be embedded into a matrix of biocompatible thermoplastic dextran esters. For that purpose, fatty acid esters of dextran with adjustable melting points in the range of 30-140 °C were synthesized. Esterification of the polysaccharide by activation of the acid as iminium chlorides guaranteed mild reaction conditions leading to high quality products as confirmed by FTIR- and NMR spectroscopy as well as by gel permeation chromatography (GPC). A method for the preparation of magnetically responsive bionanocomposites was developed consisting of combined dissolution/suspension of the dextran ester and hydrophobized MNPs in an organic solvent followed by homogenization with ultrasonication, casting of the solution, drying and melting of the composite for a defined shaping. This process leads to a uniform distribution of MNPs in nanocomposite as revealed by scanning electron microscope. Samples of different geometries were exposed to high frequency alternating magnetic field. It could be shown that defined remote melting of such biocompatible nanocomposites is possible for the first time. This may lead to a new class of magnetic remote control systems, which are suitable for controlled release applications or self-healing materials.
Assuntos
Materiais Biocompatíveis/química , Congelamento , Nanopartículas de Magnetita/química , Nanocompostos/química , Dextranos/química , Ésteres/química , Humanos , Campos Magnéticos , Temperatura de TransiçãoRESUMO
Volatile metabolites are a basis for sensory and resistance traits of Fragaria × ananassa . Stability of expression is important for the selection of cultivars. For the first time, the stability of volatiles in a strawberry population after cross-combination of two distinct cultivars ('Mieze Schindler' × 'Elsanta') has been investigated. In this work, environmentally caused variations in the synthesis of 18 volatiles were studied over two years using a model population of 158 clones. The stability varied throughout the F1 seedling population between the two years, defining stable and unstable genotypes with respect to volatile synthesis. Most of the stable genotypes exhibited low values in relative volatile concentration. Merely 6 stable volatiles were detected in the parental cultivars, whereas about 40% of the F1 progeny had up to 11 stable volatiles. Consequently, a higher stability in volatile synthesis can be achieved by breeding.
Assuntos
Fragaria/química , Frutas/química , Compostos Orgânicos Voláteis/análise , Cruzamento , Cromatografia Gasosa , Estabilidade de Medicamentos , Fragaria/genética , Fragaria/crescimento & desenvolvimento , Genótipo , Especificidade da Espécie , Fatores de TempoRESUMO
MOTIVATION: In order to assess the stability of DNA-DNA hybridizations-for example during PCR primer design or oligonucleotide selection for microarrays-one needs to predict the change in Gibbs free energy DeltaG during hybridization. The nearest neighbor model provides a good compromise between accuracy and computational simplicity for this task. To determine optimal combinations of reaction parameters (temperature, salt concentration, oligonucleotide length and GC-content), one would like to understand how DeltaG depends on all of these parameters simultaneously. RESULTS: We derive analytic results about the distribution of nearest neighbor DeltaG values for a Bernoulli random sequence model (specified by oligonucleotide length and average GC-content) under given experimental conditions. We find that the distribution of DeltaG values is approximately Gaussian and provide exact formulas for expectation and variance.