Iron-induced Hypophosphatemic Osteomalacia-An Atypical Case of Bilateral Femoral Stress Fractures.

We present a case of a 61-year-old healthy man who had bilateral femoral neck insufficiency fractures attributed to repeated iron transfusions, causing iron-induced hypophosphatemic rickets, requiring surgical intervention. Atraumatic insufficiency fractures present a diagnostic dilemma in orthopaedics. Chronic fractures with no acute precipitating trigger can often go unrecognized until complete fracturing or displacement occurs. Early identification of the risk factors in conjunction with a comprehensive history, clinical examination, and imaging can potentially avoid these serious complications. Atraumatic femoral neck insufficiency fractures have been sporadically reported in the literature, often unilateral and attributed to the use of long-term bisphosphonates. Through this case, we elaborate on the relatively unknown link between iron transfusions and insufficiency fractures. This case highlights the importance of early detection and imaging of such fractures from an orthopaedic perspective.

Asian Ethnicity and Femoral Geometry in Atypical Femur Fractures: Independent or Interdependent Risk Factors?

The earliest reports of atypical femur fractures (AFF) emerged from Asia. In the West, epidemiologic studies report a greater incidence of AFFs among subjects of Asian background. Asian ethnicity is an established risk factor for AFF, but clear mechanisms to explain this risk and implications for the general development of AFF are open questions. Ethno-specific differences in bisphosphonate action and femoral geometry have been proposed as hypotheses. In a retrospective cohort of 163 female patients presenting with AFFs or typical femur fractures (TFF), relative contributions of Asian ethnicity, proximal femoral geometry, and bisphosphonate use in AFF status were examined. There was a fourfold higher proportion of Asian subjects in the AFF compared with TFF groups (31.6%, 30/95 versus 7.4%, 5/68). Asian subjects had smaller femurs in femoral head, neck, and axial dimensions. A multiple logistic regression model for AFF status was fitted adding Asian ethnicity to three previously reported independent predictors of AFF including femoral geometry, which together comprise the Sydney AFF Score (age ≤80 years, femoral neck width <37 mm than non-Asian, lateral cortical width at lesser trochanter ≥5 mm). Asian ethnicity was a robust independent predictor of AFF, imparting sevenfold increase in the odds of AFF after adjusting for all three variables (95% confidence interval [CI] 2.2-23.2, p = 0.001) or for overall AFF score (95% CI 2.2-22.3 p = 0.001). Overall Asian subjects had higher rates of bisphosphonate use than non-Asian subjects (67.6% versus 47.2%, p = 0.034). Among AFF bisphosphonate users, Asian subjects had lower AFF scores than non-Asians (Sydney AFF Score ≤1, 45.5% Asian subjects versus 22.2% non-Asian subjects, p = 0.05). Asian ethnicity is a strong independent risk factor for AFF, unaccounted for by ethno-specific differences in proximal femoral geometry. Bisphosphonate use may be associated with a greater predisposition for AFF in Asian subjects compared with non-Asian subjects. © 2022 The Authors. JBMR Plus published by Wiley Periodicals LLC on behalf of American Society for Bone and Mineral Research.

The Sydney AFF Score: A Simple Tool to Distinguish Females Presenting With Atypical Femur Fractures Versus Typical Femur Fractures.

Atypical femur fractures (AFF) are a rare but serious complication of long-term bisphosphonate use. Although clearly defined by ASBMR criteria, a proportion of patients with AFFs may go unrecognized and the use of qualitative fracture criteria may lead to uncertainty in AFF diagnosis, with significant therapeutic implications. A score that rapidly and accurately identifies AFFs among subtrochanteric femur fractures using quantitative, measurable parameters is needed. In a retrospective cohort of 110 female patients presenting with AFFs or typical femur fractures (TFFs), multiple logistic regression and decision tree analysis were used to develop the Sydney AFF score. This score, based on demographic and femoral geometry variables, uses three dichotomized independent predictors and adds one point for each: (age ≤80 years) + (femoral neck width <37 mm) + (lateral cortical width at lesser trochanter ≥5 mm), (score, 0 to 3). In an independent validation set of 53 female patients at a different centre in Sydney, a score ≥2 demonstrated 73.3% sensitivity and 69.6% specificity for AFF (area under the receiver-operating characteristic curve [AUC] 0.775, SE 0.063) and remained independently associated with AFF after adjustment for bisphosphonate use. The Sydney AFF score provides a quantitative means of flagging female patients with atraumatic femur fractures who have sustained an AFF as opposed to a TFF. This distinction has clear management implications and may augment current ASBMR diagnostic criteria. © 2021 American Society for Bone and Mineral Research (ASBMR).

The distance of the femoral neurovascular bundle from the hip joint: an intraoperative guide to reduce iatrogenic injury.

BACKGROUND: Iatrogenic injury to the femoral neurovascular bundle is not uncommon during primary and revision total hip replacement (THR) and can result in permanent weakness, pain and poor function. Prevention of injury to these structures relies on a sound knowledge of their relationships to the hip joint. METHODS: We studied 115 consecutive hip magnetic resonance imaging (MRI) results in order to identify objective relationships between these structures and the hip joint that can be used intraoperatively. RESULTS: We determined that the shortest mean distances of the femoral nerve, artery and vein from the hip joint are 23.62 (standard deviation, SD = 5.44), 19.62 (SD = 4.17) and 17.47 (SD = 4.41) mm, respectively. The femoral nerve was lateral to the hip joint in 30 (55.5%) left- and 37 (60.7%) right-sided hip joints. The femoral artery was located medial to the hip joint in 28 (51.9%) left- and 34 (55.7%) right-sided hips. The femoral vein was medial to the hip joint in 52 (96.3%) left- and 58 (95.1%) right-sided hips. CONCLUSION: We have identified objective relationships between the hip joint and femoral neurovascular bundle that can be used with ease intraoperatively during THR. Our data show that patients with a low body weight and the elderly may be at a higher risk of iatrogenic injury due to increased proximity of the neurovascular structures to the hip. Application of this knowledge may serve to reduce the risk of iatrogenic injury to these structures and thereby improve patient satisfaction and outcomes.

Position of the sciatic nerve and effect of gluteus maximus release during hip arthroplasty.

Eight Thiel embalmed hips were dissected. The distance between the sciatic nerve and the femoral neck was measured before and after hip dislocation, and before and after release of the gluteus maximus tendon. There was a significant reduction in the mean distance between the neck of femur and the sciatic nerve in both the gluteus maximus tendon release and the unreleased groups at 60° and 90° of hip flexion, p < 0.05. The mean distance between the neck of femur and sciatic nerve was greater in the release group for all positions.

On the use of molecular-based thermodynamic models to assess the performance of solvents for CO2 capture processes: monoethanolamine solutions.

Predictive models play an important role in the design of post-combustion processes for the capture of carbon dioxide (CO2) emitted from power plants. A rate-based absorber model is presented to investigate the reactive capture of CO2 using aqueous monoethanolamine (MEA) as a solvent, integrating a predictive molecular-based equation of state: SAFT-VR SW (Statistical Associating Fluid Theory-Variable Range, Square Well). A distinctive physical approach is adopted to model the chemical equilibria inherent in the process. This eliminates the need to consider reaction products explicitly and greatly reduces the amount of experimental data required to model the absorber compared to the more commonly employed chemical approaches. The predictive capabilities of the absorber model are analyzed for profiles from 10 pilot plant runs by considering two scenarios: (i) no pilot-plant data are used in the model development; (ii) only a limited set of pilot-plant data are used. Within the first scenario, the mass fraction of CO2 in the clean gas is underestimated in all but one of the cases, indicating that a best-case performance of the solvent can be obtained with this predictive approach. Within the second scenario a single parameter is estimated based on data from a single pilot plant run to correct for the dramatic changes in the diffusivity of CO2 in the reactive solvent. This parameter is found to be transferable for a broad range of operating conditions. A sensitivity analysis is then conducted, and the liquid viscosity and diffusivity are found to be key properties for the prediction of the composition profiles. The temperature and composition profiles are sensitive to thermodynamic properties that correspond to major sources of heat generation or dissipation. The proposed modelling framework can be used as an early assessment of solvents to aid in narrowing the search space, and can help in determining target solvents for experiments and more detailed modelling.

The Distance of the Common Peroneal Nerve to the Posterolateral Structures of the Knee.

BACKGROUND: The common peroneal nerve (CPN) is an important structure of the lower limb and is at risk of injury during total knee arthroplasty. The aim of this study was to use a tibial reference system to determine the position of the CPN relative to the knee center and popliteus. METHODS: Two hundred consecutive knee magnetic resonance images at the level of a standard tibial arthroplasty cut were evaluated for (1) distance of the CPN from the posterolateral capsule; (2) angle of the CPN from the center of the tibial anteroposterior axis; and (3) location of CPN with respect to the popliteus. RESULTS: The mean distance between the CPN and the posterolateral joint capsule was 11.9 mm (range, 4.7-22.13 mm), which correlated positively with the medial-lateral axis of the tibia (Pearson correlation, 0.157; P = .026) and negatively with the angle of the nerve from the midline (Pearson correlation, -0.237, P = .001). The mean angle of the nerve from the midline was 42.2° (range, 25.0°-64.0°). In 116 knees (58%), the CPN was in line with the popliteus from the center of the knee, in 69 knees (34.5%) the CPN was lateral to the popliteus, and in 15 knees (7.5%), the CPN was medial to the popliteus. A danger zone was identified as between 29.95° and 54.57° from the anteroposterior axis. CONCLUSION: The CPN is at risk during total knee arthroplasty. This study describes a method to help predict the location of the CPN intraoperatively and therefore avoid direct injury.

Correcting rotational deformity following femoral nailing.

INTRODUCTION: The incidence of rotational malalignment after femoral nailing has been reported to be at least 20%. If the deformity is recognised early, it can be corrected by changing the distal locking screw and rotating the bone prior to fracture union. It is common practice to use the same distal locking screw of the nail if this surgery is performed, however, there is a risk of the new drill hole "cutting out" into the old screw hole. The degree of rotational deformity that needs to be corrected to use the same distal locking hole without cut out of the screw has not been defined. METHOD: Ten femora, five from cadavera and five synthetic ("Synbone"), were stabilised in a vice and then fitted with one distal transverse screw. The screw was then removed and a second distal transverse screw was inserted at the same level after variable amounts of rotation. The bone bridge between the drill holes was then measured and any cut out was noted. RESULTS: Both of the femora cut out when rotated 10 degrees, and one when rotated 15 degrees. The size of the bone bridge between drill holes in femora rotated by 20 degrees was 3 mm. This bone bridge was increased to 4mm when the femora were rotated by 25 degrees, and 8 and 9 mm when rotated by 30 degrees. CONCLUSION: The amount of rotational deformity that needs to be corrected in order to use the same distal locking hole in a femoral nail is significant. In our study, this equates to a correction of at least 25 degrees, but this is not a definitive value in practice. Particular attention must be paid to the location and size of the distal locking screw when correcting malrotation after femoral nailing, to ensure an adequate bone bridge between the two holes.