Stereocomplexation of Polymers in Micelle Nanoreactors As Studied by Multiple Detection Thermal Field-Flow Fractionation.

In this study the thermally induced in situ stereocomplexation (SC) of binary blends of symmetrical isotactic and syndiotactic polymethymethacrylates (i- and s-PMMAs) inside micellar nanoreactors (MNR) with polystyrene (PS) shells is investigated using thermal field-flow fractionation (ThFFF) as a separation technique. The MNRs are prepared from three systematic binary blending ratios of pure micelles of i-PMMA-PS and s-PMMA-PS in a nonsolvent for PMMAs in order to produce mixed micelles with a binary microstructural composition of the interior PMMA cores. The SC of these stereoregular PMMA cores inside the MNRs is shown to be thermally induced as a function of annealing temperatures from room temperature up to 150 °C. This SC is initially confirmed by Fourier transform infrared spectroscopy (FTIR), whereby signal shifts are observed in the carbonyl absorption regions. These signal shifts are as a result of SC interactions between adjacent ester and alpha-methyl groups. Furthermore, temperature-dependent dynamic light scattering (DLS) results show that MNRs with more SC domains have a much more drastic reduction in size. Additional corroboration is provided by multiple detection ThFFF results which show significant differences in retentions and sizes between MNRs with stereocomplexed cores and those without. Ratios of i-PMMA:s-PMMA in the order of 1:1, 1:2, and 2:1 were investigated with all ratios exhibiting thermal annealing induced SC, of which the 1:2 ratio is shown to have the highest predisposition to SC.

Characterization of charged polymer self-assemblies by multidetector thermal field-flow fractionation in aqueous mobile phases.

Charged block copolymer self-assemblies, such as charged micelles, have attracted much attention as versatile drug delivery systems due to their readily tunable characteristics such as size and surface charge. However, current column-based analytical techniques are not suitable to fractionate and comprehensively characterize charged micelles in terms of size, molar mass, chemical composition and morphology. Multidetector thermal field-flow fractionation (ThFFF) is shown to be a unique characterization platform that can be used to characterize charged micelles in terms of size, molar mass, chemical composition and morphology in aqueous mobile phases with various ionic strengths and pH. This is demonstrated by the characterization of poly(methacrylic acid)-b-poly(methyl methacrylate) self-assemblies in high pH buffers as well as the characterization of cationic poly(2-vinyl pyridine)-b-polystyrene and poly(4-vinyl pyridine)-b-polystyrene self-assemblies in low pH buffers. Moreover, it is shown that ThFFF is capable of separating charged micelles according to the corona composition. These investigations prove convincingly that ThFFF is broadly applicable to the comprehensive characterization of amphiphilic self-assemblies even when aqueous mobile phases are used.

Fractionation of poly(methacrylic acid) and poly(vinyl pyridine) in aqueous and organic mobile phases by multidetector thermal field-flow fractionation.

Multidetector thermal field-flow fractionation (ThFFF) is shown to be a versatile characterisation platform that can be used to characterise hydrophilic polymers in a variety of organic and aqueous solutions with various ionic strengths. It is demonstrated that ThFFF fractionates isotactic and syndiotactic poly(methacrylic acid) (PMAA) as well as poly(2-vinyl pyridine) (P2VP) and poly(4-vinyl pyridine) (P4VP) according to microstructure in organic solvents and that the ionic strength of the mobile phase has no influence on the retention behaviour of the polymers. With regard to aqueous solutions, it is shown that, despite the weak retention, isotactic and syndiotactic PMAA show different retention behaviours which can qualitatively be attributed to microstructure. Additionally, it is shown that the ionic strength of the mobile phase has a significant influence on the thermal diffusion of polyelectrolytes in aqueous solutions and that the addition of an electrolyte is essential to achieve a microstructure-based separation of P2VP and P4VP in aqueous solutions.

Characterization of Complex Polymer Self-Assemblies and Large Aggregates by Multidetector Thermal Field-Flow Fractionation.

Micelles prepared from amphiphilic block copolymers (ABCs) have found numerous applications in pharmaceutical, electronics, environmental, cosmetics, and hygiene industries. These micelles, whether in the pure or mixed micelle form, often exist as multiple morphologies (spherical, cylindrical, worm, or vesicular) in equilibrium with each other. However, none of the current column-based fractionation techniques or any microscopic technique are capable of a successful separation, identification, and quantitation of these complex self-assemblies with regards to morphology, size, molar mass, and chemical composition in one experiment. Multidetector thermal field-flow fractionation (ThFFF) is shown to be capable of separating and characterizing not only pure micelles but also mixed micelles prepared from polystyrene-poly(ethylene oxide) ABCs. In addition, multidetector ThFFF is demonstrated to be capable of successfully characterizing multiple micellar morphological evolutions (induced by the addition of an electrolyte) and thus showcasing the potential of this novel approach to monitor the formation of polymer self-assemblies with multiple and complex morphological distributions.

Fractionation of Poly(butyl methacrylate) by Molecular Topology Using Multidetector Thermal Field-Flow Fractionation.

Thermal field-flow fractionation (ThFFF) is an interesting alternative to column-based fractionation being able to address different molecular parameters including size and composition. Until today it has not been shown to be able to fractionate polymers of similar molar masses and chemical compositions by molecular topology. The present study demonstrates that poly(butyl methacrylates) with identical molar masses can be fractionated by ThFFF according to the topology of the butyl group. The influence of the solvent polarity on the thermal diffusion behavior of these polymers is presented and it is shown to have a significant influence on the fractionation of poly(n-butyl methacrylate) and poly(t-butyl methacrylate). Fractionation improves with increasing solvent polarity and solvent polarity may have a greater influence on fractionation than solvent viscosity. It is found that the thermal diffusion coefficient, D(T), as well as the hydrodynamic diameter, D(h), exhibit increasing trends with increasing solvent polarity. The solvent quality has a significant influence on the fractionation. It is found that cyclohexane, being a theta solvent for poly(t-butyl methacrylate) but not for poly(n-butyl methacrylate), significantly improves the fractionation of the samples by decreasing the diffusion rate of the former but not the latter.

Multidetector thermal field-flow fractionation as a unique tool for the tacticity-based separation of poly(methyl methacrylate)-polystyrene block copolymer micelles.

Poly(methyl methacrylate)-polystyrene (PMMA-PS) micelles with isotactic and syndiotactic coronas are prepared in acetonitrile and subjected to thermal field-flow fractionation (ThFFF) analysis at various conditions of increasing temperature gradients. It is shown for the first time that multidetector ThFFF provides comprehensive information on important micelle characteristics such as size (Dh), shape (Rg/Rh), aggregation number (Z), thermal diffusion (DT) and Soret coefficients (ST) as a function of temperature from a single injection. Moreover, it is found that micelles exhibit a unique decreasing trend in DT as a function of temperature which is independent of the tacticity of the corona and the micelle preparation method used. It is also demonstrated that ThFFF can monitor micelle to vesicle transitions as a function of temperature. In addition to ThFFF, it is found from DLS analysis that the tacticity of the corona influences the critical micelle concentration and the magnitude to which micelles expand/contract with temperature. The tacticity does not, however, influence the critical micelle temperature. Furthermore, the separation of micelles based on the tacticity of the corona highlight the unique capabilities of ThFFF.

Tacticity separation of poly(methyl methacrylate) by multidetector thermal field-flow fractionation.

For the first time, thermal field-flow fractionation (ThFFF) has been used for the separation of poly(methyl methacrylate) (PMMA) with regard to molecular microstructure. PMMA exists in three different isomeric forms, namely, isotactic, syndiotactic, and atactic. ThFFF analysis of the different PMMA isomers in tetrahydrofuran, acetonitrile (ACN), and dioxane reveals that isomers with similar molecular weights exhibit different Soret coefficients, and thus different retention times, under identical experimental conditions. Of the three solvents, ACN shows the greatest influence on fractionation of the isomers. The separation according to molecular microstructure is found to be based on the cooperative effects of the normal and thermal diffusion coefficients. Furthermore, it is found that blends of different PMMA isomers with similar molecular weights can be fractionated into their respective isomeric components. The distribution of the isomeric content in an atactic PMMA sample is determined quantitatively by fractionating the sample with ThFFF and subsequently analyzing the fractions by (1)H NMR. The isomeric distributions determined from NMR data correlate well with ThFFF retention data of the samples and thus further highlight the unique fractionating capabilities of ThFFF.

Multidetector thermal field-flow fractionation as a novel tool for the microstructure separation of polyisoprene and polybutadiene.

For the first time, it is demonstrated that thermal field-flow fractionation (ThFFF) is an efficient tool for the fractionation of polyisoprene (PI) and polybutadiene (PB) with regard to molecular microstructure. ThFFF analysis of 1,4- and 3,4-PI as well as 1,4- and 1,2-PB samples in tetrahydrofuran (THF), THF/cyclohexane, and cyclohexane reveals that isomers of the same polymer family having similar molar masses exhibit different Soret coefficients depending on microstructure for each solvent. The separation according to microstructure is found to be based on the cooperative influence of the normal and the thermal diffusion coefficient. Of the three solvents, cyclohexane has the greatest influence on the fractionation of the isomers. In order to determine the distribution of isomeric structures in the PI and PB samples, the samples are fractionated by ThFFF in cyclohexane and subsequently analyzed by (1) H NMR. The isomeric distributions determined from NMR data correlate well with ThFFF retention data of the samples and thus further highlight the unique fractionating capabilities of ThFFF. The interplay of the normal and thermal diffusion coefficients that are influenced by temperature and the mobile phase opens the way to highly selective fractionations without the drawbacks of column-based separation methods.