RESUMO
Covalent organic frameworks (COFs) are a class of porous materials whose sorption properties have so far been studied primarily by physisorption. Quantifying the self-diffusion of guest molecules inside their nanometer-sized pores allows for a better understanding of confinement effects or transport limitations and is thus essential for various applications ranging from molecular separation to catalysis. Using a combination of pulsed field gradient nuclear magnetic resonance measurements and molecular dynamics simulations, we have studied the self-diffusion of acetonitrile and chloroform in the 1D pore channels of two imine-linked COFs (PI-3-COF) with different levels of crystallinity and porosity. The higher crystallinity and porosity sample exhibited anisotropic diffusion for MeCN parallel to the pore direction, with a diffusion coefficient of Dpar = 6.1(3) × 10-10 m2 s-1 at 300 K, indicating 1D transport and a 7.4-fold reduction in self-diffusion compared to the bulk liquid. This finding aligns with molecular dynamics simulations predicting 5.4-fold reduction, assuming an offset-stacked COF layer arrangement. In the low-porosity sample, more frequent diffusion barriers result in isotropic, yet significantly reduced diffusivities (DB = 1.4(1) × 10-11 m2 s-1). Diffusion coefficients for chloroform at 300 K in the pores of the high- (Dpar = 1.1(2) × 10-10 m2 s-1) and low-porosity (DB = 4.5(1) × 10-12 m2 s-1) samples reproduce these trends. Our multimodal study thus highlights the significant influence of real structure effects such as stacking faults and grain boundaries on the long-range diffusivity of molecular guest species while suggesting efficient intracrystalline transport at short diffusion times.
RESUMO
Covalent organic frameworks (COFs) are promising electrocatalyst platforms owing to their designability, porosity, and stability. Recently, COFs with various chemical structures are developed as efficient electrochemical CO2 reduction catalysts. However, controlling the morphology of COF catalysts remains a challenge, which can limit their electrocatalytic performance. Especially, while porphyrin COFs show promising catalytic properties, their particle size is mostly large and uncontrolled because of the severe aggregation of crystallites. In this work, a new synthetic methodology for rationally downsized COF catalyst particles is reported, where a tritylated amine is employed as a novel protected precursor for COF synthesis. Trityl protection provides high solubility to a porphyrin precursor, while its deprotection proceeds in situ under typical COF synthesis conditions. Subsequent homogeneous nucleation and colloidal growth yield smaller COF particles than a conventional synthesis, owing to suppressed crystallite aggregation. The downsized COF particles exhibit superior catalytic performance in electrochemical CO2 reduction, with higher CO production rate and faradaic efficiency compared to conventional COF particles. The improved performance is attributed to the higher contact area with a conductive agent. This study reveals particle size as an important factor for the evaluation of COF electrocatalysts and provides a strategy to control it.
RESUMO
Herein, we report a facile postsynthetic linkage conversion method giving synthetic access to nitrone-linked covalent organic frameworks (COFs) from imine- and amine-linked COFs. The new two-dimensional (2D) nitrone-linked covalent organic frameworks, NO-PI-3-COF and NO-TTI-COF, are obtained with high crystallinity and large surface areas. Nitrone-modified pore channels induce condensation of water vapor at 20% lower humidity compared to their amine- or imine-linked precursor COFs. Thus, the topochemical transformation to nitrone linkages constitutes an attractive approach to postsynthetically fine-tune water adsorption properties in framework materials.
RESUMO
The incorporation of molecular machines into the backbone of porous framework structures will facilitate nano actuation, enhanced molecular transport, and other out-of-equilibrium host-guest phenomena in well-defined 3D solid materials. In this work, we detail the synthesis of a diamine-based light-driven molecular motor and its incorporation into a series of imine-based polymers and covalent organic frameworks (COF). We study structural and dynamic properties of the molecular building blocks and derived self-assembled solids with a series of spectroscopic, diffraction, and theoretical methods. Using an acid-catalyzed synthesis approach, we are able to obtain the first crystalline 2D COF with stacked hexagonal layers that contains 20 mol% molecular motors. The COF features a specific pore volume and surface area of up to 0.45 cm3 g-1 and 604 m2 g-1, respectively. Given the molecular structure and bulkiness of the diamine motor, we study the supramolecular assembly of the COF layers and detail stacking disorders between adjacent layers. We finally probe the motor dynamics with in situ spectroscopic techniques revealing current limitations in the analysis of these new materials and derive important analysis and design criteria as well as synthetic access to new generations of motorized porous framework materials.
RESUMO
As covalent organic frameworks (COFs) are coming of age, the lack of effective approaches to achieve crystalline and centimeter-scale-homogeneous COF films remains a significant bottleneck toward advancing the application of COFs in optoelectronic devices. Here, we present the synthesis of colloidal COF nanoplates, with lateral sizes of â¼200 nm and average heights of 35 nm, and their utilization as photocathodes for solar hydrogen evolution. The resulting COF nanoplate colloid exhibits a unimodal particle-size distribution and an exceptional colloidal stability without showing agglomeration after storage for 10 months and enables smooth, homogeneous, and thickness-tunable COF nanofilms via spin coating. Photoelectrodes comprising COF nanofilms were fabricated for photoelectrochemical (PEC) solar-to-hydrogen conversion. By rationally designing multicomponent photoelectrode architectures including a polymer donor/COF heterojunction and a hole-transport layer, charge recombination in COFs is mitigated, resulting in a significantly increased photocurrent density and an extremely positive onset potential for PEC hydrogen evolution (over +1 V against the reversible hydrogen electrode), among the best of classical semiconductor-based photocathodes. This work thus paves the way toward fabricating solution-processed large-scale COF nanofilms and heterojunction architectures and their use in solar-energy-conversion devices.
RESUMO
We propose two-dimensional poly(heptazine imide) (PHI) carbon nitride microparticles as light-driven microswimmers in various ionic and biological media. Their high-speed (15 to 23 micrometer per second; 9.5 ± 5.4 body lengths per second) swimming in multicomponent ionic solutions with concentrations up to 5 M and without dedicated fuels is demonstrated, overcoming one of the bottlenecks of previous light-driven microswimmers. Such high ion tolerance is attributed to a favorable interplay between the particle's textural and structural nanoporosity and optoionic properties, facilitating ionic interactions in solutions with high salinity. Biocompatibility of these microswimmers is validated by cell viability tests with three different cell lines and primary cells. The nanopores of the swimmers are loaded with a model cancer drug, doxorubicin (DOX), resulting in a high (185%) loading efficiency without passive release. Controlled drug release is reported under different pH conditions and can be triggered on-demand by illumination. Light-triggered, boosted release of DOX and its active degradation products are demonstrated under oxygen-poor conditions using the intrinsic, environmentally sensitive and light-induced charge storage properties of PHI, which could enable future theranostic applications in oxygen-deprived tumor regions. These organic PHI microswimmers simultaneously address the current light-driven microswimmer challenges of high ion tolerance, fuel-free high-speed propulsion in biological media, biocompatibility, and controlled on-demand cargo release toward their biomedical, environmental, and other potential applications.
Assuntos
Sistemas de Liberação de Medicamentos , Nitrilas , Robótica/métodos , Nanomedicina Teranóstica/métodos , Animais , Antineoplásicos/administração & dosagem , Linhagem Celular Tumoral , Doxorrubicina/administração & dosagem , Células HT29 , Humanos , Hidrodinâmica , Concentração de Íons de Hidrogênio , Luz , Camundongos , Células NIH 3T3 , Fenômenos Ópticos , Concentração Osmolar , Solução SalinaRESUMO
Covalent organic frameworks (COFs) offer a number of key properties that predestine them to be used as heterogeneous photocatalysts, including intrinsic porosity, long-range order, and light absorption. Since COFs can be constructed from a practically unlimited library of organic building blocks, these properties can be precisely tuned by choosing suitable linkers. Herein, we report the construction and use of a novel COF (FEAx-COF) photocatalyst, inspired by natural flavin cofactors. We show that the functionality of the alloxazine chromophore incorporated into the COF backbone is retained and study the effects of this heterogenization approach by comparison with similar molecular photocatalysts. We find that the integration of alloxazine chromophores into the framework significantly extends the absorption spectrum into the visible range, allowing for photocatalytic oxidation of benzylic alcohols to aldehydes even with low-energy visible light. In addition, the activity of the heterogeneous COF photocatalyst is less dependent on the chosen solvent, making it more versatile compared to molecular alloxazines. Finally, the use of oxygen as the terminal oxidant renders FEAx-COF a promising and "green" heterogeneous photocatalyst.
RESUMO
Covalent organic frameworks have emerged as a powerful synthetic platform for installing and interconverting dedicated molecular functions on a crystalline polymeric backbone with atomic precision. Here, we present a novel strategy to directly access amine-linked covalent organic frameworks, which serve as a scaffold enabling pore-wall modification and linkage-interconversion by new synthetic methods based on Leuckart-Wallach reduction with formic acid and ammonium formate. Frameworks connected entirely by secondary amine linkages, mixed amine/imine bonds, and partially formylated amine linkages are obtained in a single step from imine-linked frameworks or directly from corresponding linkers in a one-pot crystallization-reduction approach. The new, 2D amine-linked covalent organic frameworks, rPI-3-COF, rTTI-COF, and rPy1P-COF, are obtained with high crystallinity and large surface areas. Secondary amines, installed as reactive sites on the pore wall, enable further postsynthetic functionalization to access tailored covalent organic frameworks, with increased hydrolytic stability, as potential heterogeneous catalysts.
RESUMO
Solar hydrogen (H2) evolution from water utilizing covalent organic frameworks (COFs) as heterogeneous photosensitizers has gathered significant momentum by virtue of the COFs' predictive structural design, long-range ordering, tunable porosity, and excellent light-harvesting ability. However, most photocatalytic systems involve rare and expensive platinum as the co-catalyst for water reduction, which appears to be the bottleneck in the development of economical and environmentally benign solar H2 production systems. Herein, we report a simple, efficient, and low-cost all-in-one photocatalytic H2 evolution system composed of a thiazolo[5,4-d]thiazole-linked COF (TpDTz) as the photoabsorber and an earth-abundant, noble-metal-free nickel-thiolate hexameric cluster co-catalyst assembled in situ in water, together with triethanolamine (TEoA) as the sacrificial electron donor. The high crystallinity, porosity, photochemical stability, and light absorption ability of the TpDTz COF enables excellent long-term H2 production over 70 h with a maximum rate of 941 µmol h-1 g-1, turnover number TONNi > 103, and total projected TONNi > 443 until complete catalyst depletion. The high H2 evolution rate and TON, coupled with long-term photocatalytic operation of this hybrid system in water, surpass those of many previously known organic dyes, carbon nitride, and COF-sensitized photocatalytic H2O reduction systems. Furthermore, we gather unique insights into the reaction mechanism, enabled by a specifically designed continuous-flow system for non-invasive, direct H2 production rate monitoring, providing higher accuracy in quantification compared to the existing batch measurement methods. Overall, the results presented here open the door toward the rational design of robust and efficient earth-abundant COF-molecular co-catalyst hybrid systems for sustainable solar H2 production in water.
RESUMO
We report an acridium-based organic photocatalyst as an efficient replacement for iridium-based photocatalysts to oxidise boronic acid derivatives by a single electron process. Furthermore, we applied the developed catalytic system to the synthesis of four active pharmaceutical ingredients (APIs). A straightforward scale up approach using continuous flow photoreactors is also reported affording gram an hour throughput.
RESUMO
We report herein the use of a dual catalytic system comprising a Lewis base catalyst such as quinuclidin-3-ol or 4-dimethylaminopyridine and a photoredox catalyst to generate carbon radicals from either boronic acids or esters. This system enabled a wide range of alkyl boronic esters and aryl or alkyl boronic acids to react with electron-deficient olefins via radical addition to efficiently form C-C coupled products in a redox-neutral fashion. The Lewis base catalyst was shown to form a redox-active complex with either the boronic esters or the trimeric form of the boronic acids (boroxines) in solution.