Molecular Design Using Selected Concentration Effects in Optically Activated Fluorescent Matrices.

Molecular physics plays a pivotal role in various fields, including medicine, pharmaceuticals, and broader industrial applications. This study aims to enhance the methods for producing specific optically active materials with distinct spectroscopic properties at the molecular level, which are crucial for these sectors, while prioritizing human safety in both production and application. Forensic science, a significant socio-economic field, often employs hazardous substances in analyzing friction ridges on porous surfaces, posing safety concerns. In response, we formulated novel, non-toxic procedures for examining paper evidence, particularly thermal papers. Our laboratory model utilizes a polyvinyl alcohol polymer as a rigid matrix to emulate the thermal paper's environment, enabling precise control over the spectroscopic characteristics of 1,8-diazafluoro-9-one (DFO). We identified and analyzed the cyclodimer 1,8-diazafluoren-9-one (DAK DFO), which is a non-toxic and biocompatible alternative for revealing forensic marks. The reagents used to preserve fingerprints were optimized for their effectiveness and stability. Using stationary absorption and emission spectroscopy, along with time-resolved emission studies, we verified the spectroscopic attributes of the new structures under deliberate aggregation conditions. Raman spectroscopy and quantum mechanical computations substantiated the cyclodimer's configuration. The investigation provides robust scientific endorsement for the novel compound and its structural diversity, influenced by the solvatochromic sensitivity of the DFO precursor. Our approach to monitoring aggregation processes signifies a substantial shift in synthetic research paradigms, leveraging simple chemistry to yield an innovative contribution to forensic science methodologies.

Photophysical properties of DAPI in PVA films. Possibility of room temperature phosphorescence.

We studied the spectral properties of 4'-6-diamidino-2-phenylindole (DAPI) in poly (vinyl alcohol) (PVA) films. Absorption and fluorescence spectra, emission and excitation spectra, quantum yield, and fluorescence lifetime have been characterized. An efficient room temperature phosphorescence (RTP) of DAPI has been observed with UV and blue light excitations. A few hundred millisecond phosphorescence lifetime enables a gated detection with sufficient background reduction. We found the phosphorescent Quantum Yield of DAPI in PVA Film to be 0.0009.

Analysis of friction ridge evidence for trace amounts of paracetamol in various pharmaceutical industries by Raman spectroscopy.

The detection of potentially harmful substances presents a multifaceted challenge. On one hand, it can directly save lives, on the other, it can significantly aid and enhance police work, thereby increasing the effectiveness of investigations. The research conducted in this study primarily aims to identify paracetamol in fingerprints, considering situations involving direct contact of a person with paracetamol either chronically or in a single dose. The identification procedure presented, utilizing Raman spectroscopy, aims to rapidly detect the xenobiotic following ingestion by an individual, which involves touching the tablet with their fingers-this can be termed as touch evidence in forensic science investigations. Additionally, the authors focus on assessing the impact of additives present in drugs containing paracetamol as the main active ingredient. The screening results obtained will enable us to analyze the composition of drugs in terms of potentially toxic substances, and their influence on the physicochemical activity of the active substance. We successfully identified the paracetamol molecule using a noninvasive forensic trace detection method. Samples in the form of common drugs containing 500 mg of paracetamol were studied. Throughout the study, comprehensive validation of the method was ensured through the utilization of a statistical model, which excluded sensitivity to the presence of other substances, whether additives or from the external environment. The proposed approach to trace the content of substances in fingerprint using Raman scattering analysis provides a useful starting point to enhance current analytical methods not only in forensic science but also in toxicology.

Effect of annealing on the room temperature luminescence of coumarin 106 in PVA films.

We studied the effect of annealing on the luminescence of Coumarin 106 (C106) in poly (vinyl alcohol) films (PVA films). The samples and reference polymer films were treated at temperatures between 100 °C and 150 °C (212 F and 302 F) for various times. After cooling and smoothing, the samples and references were measured at room temperature. We observed that the PVA polymer (reference films) changes its optical properties with annealing at higher temperatures, affecting the baselines in absorption and the backgrounds in emission measurements. This requires precise background subtractions and control of the signal-to-noise ratio. Whereas the fluorescence intensity of C106 in PVA films modestly decreases with annealing, the phosphorescence depends dramatically and progressively increases by many folds. The fluorescence quantum yields and lifetimes decrease with the annealing, which suggests an increase in the non-radiative processes in the singlet excited state S1. The increase in the phosphorescence intensities results from increased intersystem crossing (ISC), which also decreases fluorescence. We also studied the effect of annealing on phosphorescence with the directly excited triplet state of C106. In this case, two processes are affected by annealing, S0→T1absorption and T1→S0phosphorescence. The long-wavelength excitation (475 nm) avoids PVA polymer excitation. The phosphorescence lifetime decreases with annealing while the phosphorescence intensity increases. These changes suggest that the radiative rate of T1→ S0increases with annealing.

Multi intercalators FRET enhanced detection of minute amounts of DNA.

A novel approach is presented that increases sensitivity and specificity for detecting minimal traces of DNA in liquid and on solid samples. Förster Resonance Energy Transfer (FRET) from YOYO to Ethidium Bromide (EtBr) substantially increases the signal from DNA-bound EtBr highly enhancing sensitivity and specificity for DNA detection. The long fluorescence lifetime of the EtBr acceptor, when bound to DNA, allows for multi-pulse pumping with time gated (MPPTG) detection, which highly increases the detectable signal of DNA-bound EtBr. A straightforward spectra/image subtraction eliminates sample background and allows for a huge increase in the overall detection sensitivity. Using a combination of FRET and MPPTG detection an amount as small as 10 pg of DNA in a microliter sample can be detected without any additional sample purification/manipulation or use of amplification technologies. This amount of DNA is comparable to the DNA content of a one to two human cells. Such a detection method based on simple optics opens the potential for robust, highly sensitive DNA detection/imaging in the field, quick evaluation/sorting (i.e., triaging) of collected DNA samples, and can support various diagnostic assays.

Room Temperature Phosphorescence of 5,6-Benzoquinoline.

Phosphorescence emission of 5,6-Benzoquinoline embedded in poly (vinyl alcohol) film has been studied at room temperature. A strong green long-lived emission was observed in films doped with 5,6-Benzoquinoline while illuminated on a UV plate. A broad phosphorescence emission spectrum is centered at about 500 nm. The phosphorescence excitation spectrum follows the absorption spectrum of 5,6-Benzoquinoline, except for a long-wavelength part, which is well beyond the absorption band. This long-wavelength part of the absorption spectrum is responsible for the forbidden S0-T1transition. The excitation at 430 nm resulted in the long-lived emission with a spectrum similar to the phosphorescence spectrum obtained with UV excitation within the absorption of 5,6-Benzoquinoline. The phosphorescence anisotropy obtained with a direct S0-T1excitation is positive, while the UV excitation is negative. In contrast to fluorescence, the phosphorescence intensity strongly depends on temperature. Phosphorescence lifetimes with UV and long-wavelength excitation are similar, with a mean value of about 0.5 s.

Room temperature phosphorescence of 2-aminopyridine with direct triplet state excitation.

Phosphorescence emission at room temperature has been observed from 2-Aminopyridyne (2APi) embedded in poly (vinyl alcohol) (PVA) films. The gated emission with UV excitation at 305 nm results in a residual delayed fluorescence at around 350 nm and a broad phosphorescence spectrum with a maximum of around 500 nm. The phosphorescence excitation spectrum of 2APi - doped PVA film differs from the absorption spectrum in the long-wavelength part, showing a band at about 400-450 nm. The phosphorescence spectrum measured with a blue (420 nm) excitation closely resembles the spectrum measured with 305 nm excitation. Whereas the phosphorescence anisotropy measured with UV excitation is low and negative, with the blue excitation, the anisotropy is high and positive. The phosphorescence lifetimes (a fraction of a millisecond) are similar for UV and blue excitations. Both phosphorescence emissions with either UV or blue excitation strongly depend on temperature.

Fluorescence measurements: importance of G-factor correction, magic angle, and observation wavelengths.

Excitation and emission (observation) conditions heavily impact fluorescence measurements. Both observed spectra and intensity decays (fluorescence lifetimes), when incorrectly measured, may lead to incorrect data interpretations. In this report, we discuss the role of observation conditions in steady-state and time-resolved (lifetime) fluorescence measurements. We demonstrate the importance of the correction for uneven transmissions of vertical and horizontal polarizations of emission light through the detection system. The necessity of using so-called total fluorescence intensity or intensity measured under magic angle (MA) conditions has been demonstrated for both steady-state and time-resolved fluorescence measurements. The dependence of lifetime measurements on observation (emission) wavelengths is also discussed. Two fluorophores, rhodamine 6G (R6G) and 4,4 Dimethylamino-cyano stilbene (DCS) in two solvents - ethanol and glycerol have been used in order to cover a broad range of dye polarities and solvent viscosities.

Imaging and detection of long-lived fluorescence probes in presence of highly emissive and scattering background.

Optical biomedical imaging and diagnostics is a rapidly growing field that provides both structural and functional information with uses ranging from fundamental to practical clinical applications. Nevertheless, imaging/visualizing fluorescence objects with high spatial resolution in a highly scattering and emissive biological medium continues to be a significant challenge. A fundamental limiting factor for imaging technologies is the signal-to-background ratio (SBR). For a long time to improve the SBR, we tried to improve the brightness of fluorescence probes. Many novel fluorophores with improved brightness (almost reaching the theoretical limit), redshifted emission, highly improved photostability, and biocompatibility greatly helped advance fluorescence detection and imaging. However, autofluorescence, scattering of excitation light, and Raman scattering remain fundamental limiting problems that drastically limit detection sensitivity. Similarly, significant efforts were focused on reducing the background. High-quality sample purification eliminates the majority of autofluorescence background and in a limited confocal volume allows detection to reach the ultimate sensitivity to a single molecule. However, detection and imaging in physiological conditions does not allow for any sample (cells or tissue) purification, forcing us to face a fundamental limitation. A significant improvement in limiting background can be achieved when fluorophores with a long fluorescence lifetime are used, and time-gated detection is applied. However, all long-lived fluorophores present low brightness, limiting the potential improvement. We recently proposed to utilize multipulse excitation (burst of pulses) to enhance the relative signal of long-lived fluorophores and significantly improve the SBR. Herein, we present results obtained with multipulse excitation and compare them with standard single-pulse excitation. Subtraction of images obtained with a single pulse from those obtained with pulse burst (differential image) highly limits background and instrumental noise resulting in more specific/sensitive detection and allows to achieve greater imaging depth in highly scattering media, including skin and tissue.

Förster Resonance Energy Transfer-Enhanced Detection of Minute Amounts of DNA.

This article presents a novel approach to increase the detection sensitivity of trace amounts of DNA in a sample by employing Förster resonance energy transfer (FRET) between intercalating dyes. Two intercalators that present efficient FRET were used to enhance sensitivity and improve specificity in detecting minute amounts of DNA. Comparison of steady-state acceptor emission spectra with and without the donor allows for simple and specific detection of DNA (acceptor bound to DNA) down to 100 pg/µL. When utilizing as an acceptor a dye with a significantly longer lifetime (e.g., ethidium bromide bound to DNA), multipulse pumping and time-gated detection enable imaging/visualization of picograms of DNA present in a microliter of an unprocessed sample or DNA collected on a swab or other substrate materials.

Direct excitation of tryptophan phosphorescence. A new method for triplet states investigation.

We studied room temperature phosphorescence of tryptophan (TRP) embedded in poly (vinyl alcohol) films. With UV (285 nm) excitation, the phosphorescence spectrum of tryptophan appears at about 460 nm. We also observed the TRP phosphorescence with blue light excitation at 410 nm, well outside of the S0→S1absorption. This excitation reaches the triplet state of tryptophan directly without the involvement of the singlet excited state. The phosphorescence lifetime of tryptophan is in the sub-millisecond range. The long-wavelength direct excitation to the triplet state results in high phosphorescence anisotropy which can be useful in macromolecule dynamics study via time-resolved phosphorescence.

Non-excitonic defect-assisted radiative transitions are responsible for new D-type blinking in ternary quantum dots.

This work addresses the issue of dark states formation in QDs by cooperative excitonic and intrinsic defect-assisted radiative transitions. Here we refer to the observed blinking as D-type to distinguish it from purely excitonic types. It is shown experimentally that defect-assisted radiative relaxations in a single I-III-VI QD result in atypical blinking characteristics that cannot be explained on the basis of charged exciton models. In addition to the excitonic channel, it has been proposed that defect-assisted kinetics can also form blinking patterns. Two conditions for the formation of dark states have been identified which are related to correlation and competition when considering photons emitted from bright defects. Two transition schemes have therefore been proposed. The first transition scheme includes time-correlated trapping of more than one electron at a single trap centre. This is used to simulate variations in the defect's charge state and switching between radiative/nonradiative transitions. The latter scheme, on the other hand, involves uncorrelated trapping and radiative relaxations from two different types of defects (competition). Both schemes are seen to play an equal role in radiative processes in I-III-VI QDs. Considered together, the proposed models can reflect the experimental data with very good accuracy, providing a better understanding of the underlying physics. An important implication of these schemes is that dark states formation doesn't have to be limited to mechanisms that involve charged excitons, and it may also be observed for independent defect assisted kinetics. This is especially valid for highly defected or multinary QDs.

A novel approach to imaging and visualization of minute amounts of DNA in small volume samples.

This report presents a novel approach for detecting and visualizing small to trace amounts of DNA in a sample. By utilizing both the change in emission spectrum and change in fluorescence lifetime, there is a significant increase in detection sensitivity allowing for the imaging/visualizing of a picograms amount of DNA in a microliters volume. As in the previous reports, one of the oldest DNA intercalators, Ethidium Bromide (EtBr), is employed as a model system. With this new approach, it is feasible to visualize just a few hundred picograms of DNA without the need for prior DNA amplification. The sensitivity can later be largely improved by using an intercalator that exhibits a higher affinity to DNA and a larger fluorescence change upon binding to DNA (e.g., ethidium homodimer, YOYO, or Diamond nucleic acid dyes).

On the origin and correction for inner filter effects in fluorescence. Part II: secondary inner filter effect -the proper use of front-face configuration for highly absorbing and scattering samples.

Fluorescence is an established technology for studying molecular processes and molecular interactions. More recently fluorescence became a leading method for detection, sensing, medical diagnostics, biotechnology, imaging, DNA analysis, and gene expression. Consequently, precise and accurate measurements in various conditions have become more critical for proper result interpretations. Previously, in Part 1, we discussed inner filter effect type I, which is a consequence of the instrumental geometrical sensitivity factor and absorption of the excitation. In this part, we analyze inner filter effect type II and discuss the practical consequences for fluorescence measurements in samples of high optical density (absorbance/scattering). We consider both the standard square and front-face experimental configurations, discuss experimental approaches to limit/mitigate the effect and discuss methods for correcting and interpreting experimental results.

A novel approach for visualization and localization of small amounts of DNA on swabs to improve DNA collection and recovery process.

In this report, a simple and practical procedure is proposed for DNA localization on a solid matrix e.g., a collection swab. The approach is straightforward and employs spectrum decomposition using a model DNA intercalator Ethidium Bromide (EtBr). The proposed approach can detect picograms of DNA in solution and nanograms of DNA on solid surfaces (swabs) without the need for PCR amplification. The proposed technology offers the possibility for developing an inexpensive, sensitive, rapid, and practical method for localizing and recovering DNA deposited on collection swabs during routine DNA screening. Improved detection of low DNA concentrations is needed and, if feasible, will allow for better decision making in clinical medicine, biological and environmental research, and human identification in forensic investigations.

On the origin and correction for inner filter effects in fluorescence Part I: primary inner filter effect-the proper approach for sample absorbance correction.

Fluorescence technologies have been the preferred method for detection, analytical sensing, medical diagnostics, biotechnology, imaging, and gene expression for many years. Fluorescence becomes essential for studying molecular processes with high specificity and sensitivity through a variety of biological processes. A significant problem for practical fluorescence applications is the apparent non-linearity of the fluorescence intensity resulting from inner-filter effects, sample scattering, and absorption of intrinsic components of biological samples. Sample absorption can lead to the primary inner filter effect (Type I inner filter effect) and is the first factor that should be considered. This is a relatively simple factor to be controlled in any fluorescence experiment. However, many previous approaches have given only approximate experimental methods for correcting the deviation from expected results. In this part we are discussing the origin of the primary inner filter effect and presenting a universal approach for correcting the fluorescence intensity signal in the full absorption range. Importantly, we present direct experimental results of how the correction works. One considers problems emerging from varying absorption across its absorption spectrum for all fluorophores. We use Rhodamine 800 and demonstrate how to properly correct the excitation spectra in a broad wavelength range. Second is the effect of an inert absorber that attenuates the intensity of the excitation beam as it travels through the cuvette, which leads to a significant deviation of observed results. As an example, we are presenting fluorescence quenching of a tryptophan analog, NATA, by acrylamide and we show how properly corrected results compare to the initial erroneous results. The procedure is generic and applies to many other applications like quantum yield determination, tissue/blood absorption, or acceptor absorption in FRET experiments.

On the possibility of direct triplet state excitation of indole.

We studied the luminescence properties of indole in poly (vinyl alcohol) (PVA) film. The indole molecules are effectively immobilized in this polymer film and display both fluorescence and phosphorescence emission at room temperature. We noticed that the phosphorescence of indole in PVA film can be effectively excited at a longer wavelength than its typical singlet to triplet population route involving intersystem crossing. The maximum of the phosphorescence excitation is about 410 nm which corresponds to the energy of indole's triplet state. Interestingly, the phosphorescence anisotropy excited with the longer wavelength (405 nm) is positive and reaches a value of about 0.25 in contrast to the phosphorescence anisotropy excited within the indole singlet absorption spectrum (290 nm), which is negative. Very different temperature dependences have been observed for fluorescence and phosphorescence of indole in PVA film. While fluorescence depends minimally, the phosphorescence decreases with temperature dramatically. The fluorescence lifetime was measured to be a single component 4.78 ns while the intensity weighted average phosphorescence lifetime with 290 nm and 405 nm excitations were 6.57 and 5.62 ms, respectively. We believe that the possibility of the excitation of indole phosphorescence in the blue region of visible light and its high anisotropy opens a new avenue for future protein studies.

Probing the Assembly of HDL Mimetic, Drug Carrying Nanoparticles Using Intrinsic Fluorescence.

Reconstituted high-density lipoprotein (HDL) containing apolipoprotein A-I (Apo A-I) mimics the structure and function of endogenous (human plasma) HDL due to its function and potential therapeutic utility in atherosclerosis, cancer, neurodegenerative diseases, and inflammatory diseases. Recently, a new class of HDL mimetics has emerged, involving peptides with amino acid sequences that simulate the the primary structure of the amphipathic alpha helices within the Apo A-I protein. The findings reported in this communication were obtained using a similar amphiphilic peptide (modified via conjugation of a myristic acid residue at the amino terminal aspartic acid) that self-assembles (by itself) into nanoparticles while retaining the key features of endogenous HDL. The studies presented here involve the macromolecular assembly of the myristic acid conjugated peptide (MYR-5A) into nanomicellar structures and its characterization via steady-state and time-resolved fluorescence spectroscopy. The structural differences between the free peptide (5A) and MYR-5A conjugate were also probed, using tryptophan fluorescence, FÓ§rster resonance energy transfer (FRET), dynamic light scattering, and gel exclusion chromatography. To our knowledge, this is the first report of a lipoprotein assembly generated from a single ingredient and without a separate lipid component. The therapeutic utility of these nanoparticles (due to their capablity to incorporate a wide range of drugs into their core region for targeted delivery) was also investigated by probing the role of the scavenger receptor type B1 in this process. SIGNIFICANCE STATEMENT: Although lipoproteins have been considered as effective drug delivery agents, none of these nanoformulations has entered clinical trials to date. A major challenge to advancing lipoprotein-based formulations to the clinic has been the availability of a cost-effective protein or peptide constituent, needed for the assembly of the drug/lipoprotein nanocomplexes. This report of a robust, spontaneously assembling drug transport system from a single component could provide the template for a superior, targeted drug delivery strategy for therapeutics of cancer and other diseases (Counsell and Pohland, 1982).

Non-fluorescent filters for fluorescence detection with in-line geometry.

Intrinsic emission from typical filters can unexpectedly contribute to the total measured signal in a fluorescence system. This emission becomes even more problematic for in-line geometry measurements where the excitation light can directly excite the emission filter. Potassium dichromate has minimal intrinsic fluorescence even with ultra-violet (UV) excitation. We show that a liquid sample can be tuned for its transmission properties by adding a base to the solution. This makes it attractive for use as an optical filter. In addition, when embedded in poly (vinyl alcohol) (PVA) film, potassium dichromate is even less fluorescent. These films can be cut and molded into practically any size or shape. Thus non-fluorescent, modular and cheap filters composed of potassium dichromate embedded in a PVA film is proposed to eliminate this unwanted emission and is suitable for a wide variety of devices and applications.

Identification of Binding Sites for Efflux Pump Inhibitors of the AcrAB-TolC Component AcrA.

The overexpression of multidrug efflux pumps is an important mechanism of clinical resistance in Gram-negative bacteria. Recently, four small molecules were discovered that inhibit efflux in Escherichia coli and interact with the AcrAB-TolC efflux pump component AcrA. However, the binding site(s) for these molecules was not determined. Here, we combine ensemble docking and molecular dynamics simulations with tryptophan fluorescence spectroscopy, site-directed mutagenesis, and antibiotic susceptibility assays to probe binding sites and effects of binding of these molecules. We conclude that clorobiocin and SLU-258 likely bind at a site located between the lipoyl and ß-barrel domains of AcrA.