RESUMO
Tunable photoluminescence (PL) is one of the hot topics in current materials science, and research performed on the molecular phases is at the forefront of this field. We present the new (Et4N)2[PtII(bph)(CN)2]â rez3â 1/3H2O (Pt2rez3) (bph=biphenyl-2,2'-diyl; rez3=3,3",5,5"-tetrahydroxy-1,1':4',1"-terphenyl, phenylene-1,4-diresorcinol coformer, a linear quaternary hydrogen bond donor) co-crystal salt based on the recently appointed promising [PtII(bph)(CN)2]2- luminophore. Within the extended hydrogen-bonded subnetwork [PtII(bph)(CN)2]2- complexes and rez3 coformer molecules form two types of contacts: the rez3O-Hâ â â Ncomplex ones in the equatorial plane of the complex and non-typical rez3O-Hâ â â Pt ones along its axial direction. The combined structural, PL, and DFT approach identified the rez3O-Hâ â â Pt synthons to be crucial in promoting the noticeable uniform redshift of bph ligand centered (LC) emission compared to the LC emission of the (Et4N)2[PtII(bph)(CN)2]â H2O (Pt2) precursor, owing to the direct interference of the phenol group with the PtII-bph orbital system via altering the CT processes within. The high-resolution emission spectra for Pt2 and Pt2rez3 were successfully reproduced at 77â K by using the Franck-Cordon expressions. The possibility to tune PL properties along the plausible continuum of rez3O-Hâ â â Pt synthons is indicated, considering various scenarios of molecular occupation of the space above and below the complex plane.
RESUMO
This study investigates the impacts of structure and composition on the optical and electronic properties of a series of pyridinium-based bismuth iodide complexes. Organic substrates with various functional groups, such as 4-aminopyridine (4-Ampy), 4-methylpyridine (4-Mepy), 4-dimethylaminopyridine (4-Dmapy), and 4-pyridinecarbonitrile (4-CNpy) with different electron-donating and electron-withdrawing groups at the para position of the pyridine ring were employed. Crystallographic analysis reveals various bismuth iodide structures, including 1D chains and discrete 0D motifs. The optical band gap of these materials, identified via diffuse reflectance spectroscopy (DRS) and verified with density functional theory (DFT) calculations, is influenced by the crystal packing and stabilising interactions. Through a comprehensive analysis, including Hirshfeld surface (HS) and void assessment, the study underscores the influence of noncovalent intermolecular interactions on crystal packing. Spectroscopic evaluations provide insights into electronic interactions, elucidating the role of electron donor and acceptor substituents within the lattice. Thermogravimetric differential thermal analysis (TG-DTA) indicates structural stability up to 250 °C. Linear sweep voltammetry (LSV) reveals significant conductivity in the range of 10-20 mS per pixel at 298.15 K. X-ray absorption spectroscopy (XAS) at the Bi L3 edge indicates a similar oxidation state and electronic environment across all samples, underscoring the role of bismuth centres surrounded by iodides.
RESUMO
Triazaacephenanthrylene (TAAP) triclinic single crystals show substantial optical anisotropy of absorption and fluorescence. The maximum effect can be correlated with the direction perpendicular to the plane of chromophores connected in a head-to-tail manner via weak dispersive interactions. This phenomenon is uncommon as usually the existence of postulated π···π interactions between the molecules forming dimers or stacks cause quenching of fluorescence. Herein we present a comprehensive study of inter- and intramolecular interactions in the crystal of TAAP enriched with the investigation of aromaticity. Our results show that intramolecular interactions stabilize the overall conformation of the molecule whereas dispersive forces determine the aggregation between TAAP molecules. In fact, there is no conventional π···π interaction between the molecules in the dimer. Instead, we observed a close contact between the lone pair of the bridgehead N10B atom and π-deficient pyrazine ring from an adjacent molecule. Optical anisotropy in TAAP crystals was directly correlated with the alignment of the molecular transition dipole moments caused by specific molecular self-assembly.
RESUMO
The carboxylic acid group is an example of a functional group which possess a good hydrogen-bond donor (-OH) and acceptor (C=O). For this reason, carboxylic acids have a tendency to self-assembly by the formation of hydrogen bonds between the donor and acceptor sites. We present here the crystal structure of N-tosyl-L-proline (TPOH) benzene hemisolvate {systematic name: (2S)-1-[(4-methylbenzene)sulfonyl]pyrrolidine-2-carboxylic acid benzene hemisolvate}, C12H15NO4S·0.5C6H6, (I), in which a cyclic R22(8) hydrogen-bonded carboxylic acid dimer with a strong O-(1/2H)...(1/2H)-O hydrogen bond is observed. The compound was characterized by single-crystal X-ray diffraction and NMR spectroscopy, and crystallizes in the space group I2 with half a benzene molecule and one TPOH molecule in the asymmetric unit. The H atom of the carboxyl OH group is disordered over a twofold axis. An analysis of the intermolecular interactions using the noncovalent interaction (NCI) index showed that the TPOH molecules form dimers due to the strong O-(1/2H)...(1/2H)-O hydrogen bond, while the packing of the benzene solvent molecules is governed by weak dispersive interactions. A search of the Cambridge Structural Database revealed that the disordered dimeric motif observed in (I) was found previously only in six crystal structures.
RESUMO
Chromic materials are nowadays widely used in various technological applications, however understanding the effect and the possibility of tuning the obtained colour of a material are still challenging. Here a combined experimental and theoretical study is presented on the solvatochromic and crystallochromic effects in the (pseudo)polymorphs of tyraminium violurate. This organic material exhibits a large solvatochromic shift (ca 192â nm) associated with broad colour change (from yellow to dark violet). Tyraminum violurate crystallizes as red crystals of form (I) from water as a solvate, and as an unsolvated form [violet crystals of (II)] from methanol solution. Form (I), when heated, undergoes two crystal-to-crystal phase transformations associated with colour change of the crystals. Crystals of (II) show extreme birefringence (ca 0.46) and high refractive index (n γ above 1.90), which can be correlated with preferential orientation of the resultant dipole moments of the ions. Examination of optical effects (UV-Vis spectra) along with theoretical calculations (QTAIM, atomic and bond polarizabilities) enabled the description of the origin of colour in the studied materials.
RESUMO
Here a new, systematic, unambiguous and unified nomenclature for multicomponent materials is presented. The approach simplifies naming schemes of extraordinary co-crystals containing multiple building blocks with different charges. Although the presented examples of cytosine compounds cannot cover all possibilities, they clearly show that the new nomenclature is flexible and can be easily extended to other multicomponent materials.
RESUMO
In the past two decades, the solvomorphism phenomenon in organic materials has attracted much attention, especially in the pharmaceutical and materials industries. Cocrystallization with solvent molecules can lead to modified physical and chemical properties of materials. We present here two new solvomorphs (pseudopolymorphs) of tyraminium 5,5-diethylbarbiturate [2-(4-hydroxyphenyl)ethanaminium 5,5-diethyl-2,4,6-trioxotetrahydro-2H-pyrimidin-1-ide, C8H12NO+·C8H11N2O3-] with unusual structural features. Pseudopolymorph (I) follows the symmetry of the P21/n space group and has four tyraminium cations, four barbitalate anions and four molecules of chloroform in the asymmetric unit. Pseudopolymorph (II) crystallizes in the space group R-3c with one tyraminium cation, one barbitalate anion and a small amount of disordered solvent (ethanol and water) located in the cavities. Hirshfeld surface analysis and the Non-Covalent Interaction (NCI) index were used to examine and compare the crystal packing features and intermolecular interactions in (I) and (II). Both materials crystallize with large unit cells and contain nontypical barbitalate ions formed through deprotonation of the barbital N3 position. Pseudopolymorph (I) is an example of a crystal structure with a rarely observed value of Z' = 4. Analysis of the hydrogen-bond patterns in (II) showed an unusual arrangement of three barbitalate anions in R33(12) rings, which is the first example of such a hydrogen-bond motif in barbital structures. The mutual arrangement of the ions in the crystal structure of (II) leads to the formation of specific cavities along the c direction.
RESUMO
Technological innovation enforces a revolutionized approach towards materials chemistry. In this paper a new methodology towards crystal engineering of polar materials for possible applications in linear or non-linear optics (NLO), as well as ferroelectric, pyroelectric or piezoelectric crystals is presented. The necessity to fulfil several criteria concerning symmetry, electron properties of the building blocks, and also mechanical and optical stability was achieved by fusion of a pharmaceutical molecule and an NLO-phore. Co-crystals of 2-amino-5-nitropyridine barbital, presented in this manuscript, show cutting-edge optical performance. Large second harmonic generation (SHG) efficiency (40 times better than potassium dihydrogen phosphate, KDP), extreme birefringence (2.7 times higher than for calcite), simplicity in preparation, and optical and mechanical stability of the product proves that in fact a new generation of smart materials was obtained.
RESUMO
The structural origin of absorption and fluorescence anisotropy of the single crystal of the π-conjugated heterocyclic system 5,6,10b-tri-aza-acephenan-thrylene, TAAP, is presented in this study. X-ray analysis shows that the crystal framework in the space group P [Formula: see text] is formed by centrosymmetric dimers of face-to-face mutually oriented TAAP molecules joined by π-π non-covalent interactions. The conformation of the TAAP molecule is stabilized by intramolecular C-Hâ¯N(sp2), N(sp2)Hâ¯π(CN), and C-Hâ¯O(sp2) hydrogen bonds. The presence of weak π-π interactions is confirmed by quantum theory of atoms in molecules (QTAIM) and non-covalent interaction (NCI) analysis. The analysis of the optical spectra of TAAP in solution and in the solid state does not allow the specification of the aggregation type. DFT calculations for the dimer in the gas phase indicate that the lowest singlet excitation is forbidden by symmetry, suggesting H-type aggregation, even though the overall absorption spectrum is bathochromically shifted as for the J-type. The experimental determination of the permanent dipole moment of a TAAP molecule in 1,4-dioxane solution indicates the presence of the monomer form. The calculated absorption and emission spectra of the crystal in a simple approximation are consistent with the experimentally determined orientation of the absorption and emission transition dipole moments in TAAP single crystals. The electrostatic interaction between monomers with a permanent dipole moment (ca 4 D each) could result in the unusual spectroscopic JH-aggregate behaviour of the TAAP dimer.
RESUMO
New nontoxic and biocompatible ferroelectric materials are a subject undergoing intense study. One of the most promising research branches is focused on H-bonded organic or hybrid ferroelectrics. The engineering of these materials is based on mimicking the phase transition mechanisms of the well-known inorganic ferroelectrics. In our study, a coupled experimental and theoretical methodology was used for a precise investigation of the ferroelectric phase transition mechanism in ammonium sulfate (AS). A series of single-crystal X-ray diffraction measurements were performed in the temperature range between 273 and 163 K. The detailed inspection of the obtained static structural data, in the above-mentioned temperature range, allowed us to reveal dynamical effects at the ferroelectric phase transition. Accurate analysis of all geometrical features within the obtained crystal structures was carried out. The results were discussed in the view of previously discovered physical properties. X-ray studies were complemented by the use of quantum theory of atoms in molecules calculations and Hirshfeld surface analysis. Valence shell charge concentration analysis allowed us to find the subtle changes between charge density distribution within SO42- in para- and ferroelectric phases. H-bond interactions, geometrically classified in both AS phases, were all confirmed by the appropriate critical points. The interaction energies were estimated for the structures at 273, 233, 213, 183, and 163 K. Correlation between the geometrical approach and the results of theoretical calculations enabled us to discover the differences in interaction equilibrium between the AS phases. The mechanism of the phase transition originates from the disruption of the vibrational lattice mode between sulfate anions. Our studies resolved the problem, which was under discussion for more than 60 years.
RESUMO
Analysis of the spectral properties and structural differences of two turn-on ratiometric fluorescent receptors for Zn(2+) and Cd(2+) ions, derivatives of pyrrolo[2,3-b]quinoxaline (2), and earlier published 3 (Ostrowska et al. CrystEngComm 2015, 17, 498-502) was performed. Both ligands are E/Z push-pull olefins interconverting at room temperature, with barriers to rotation about enamine double bonds, from E to Z isomers of 19.3 ± 0.1 and 16.9 ± 0.3 kcal/mol and from Z to E of 16.9 ± 0.3 and 15.7 ± 0.2 kcal/mol, respectively. Diastereoisomers (E)-2 and (Z)-2 were isolated and characterized by X-ray structural analysis. The formation of complexes by (E/Z)-2 with acetates and acetylacetonates of Zn(2+) and Cd(2+) was monitored by UV-vis, fluorescence, and (1)H NMR titrations in acetonitrile, respectively. X-ray structural analysis for isolated [(E)-2]2Zn in relation to earlier published (E)-3-ZnOAc revealed the formation of a six-coordinated zinc ion with six- and four-membered bis-chelate rings by (E)-2. The chelate effect increases the ligand affinity for Zn(2+) (log ß12 = 12.45) and causes the elongation of nitrogen-metal bonds. Extension of the coordination cavity size allows coordination of a cadmium ion. The introduction of a flexible ethylene linker between the fluorophore and ionophore pyridyl groups in 3 significantly affects the selectivity of zinc-ion recognition. The distorted tetrahedral geometry of (E)-3-ZnOAc with a four-coordinated zinc ion appears to be the most preferred because of the short donor-zinc distance with a 1:1 binding mode. The formation of the small coordination cavity size with six-membered bis-chelate rings provides an effective overlap of zinc and donor orbitals, precluding the coordination of a cadmium ion in the same manner as zinc.
Assuntos
Quelantes/química , Fluorescência , Piridinas/química , Zinco/análise , Cristalografia por Raios X , Íons/análise , Modelos Moleculares , Estrutura Molecular , Tamanho da Partícula , Piridinas/síntese química , Quinoxalinas/químicaRESUMO
Active pharmaceutical ingredients (APIs), through their favourable donor/acceptor spatial distribution and synthon formation flexibility, are attractive building blocks in modern materials crystallography. The optical properties of a crystal strongly depend on two factors, i.e. the spatial distribution of molecules in the crystal structure and the electronic properties of molecular building blocks (dipole moments, polarizabilities, hyperpolarizabilities). Although the latter are easy to predict through ab initio calculations, the former are not. Only a combination of experimental and theoretical charge density studies together with prediction and measurement of optical properties enable full analysis of the obtained functional material in terms of its usefulness in practical applications. This article presents design strategies of optical materials based on selected pharmaceutical molecules. Factors that contribute to molecular recognition in the four selected polar/chiral crystal phases (derived through charge density and Hirshfeld surfaces analysis) have been determined. Theoretically predicted optical properties of the molecular/ionic building blocks as well as bulk effects have been confirmed experimentally. This research is a first step in the design of novel optical materials based on push-pull molecules and APIs.
Assuntos
Química Farmacêutica , Fenômenos Ópticos , Preparações Farmacêuticas/química , Teoria Quântica , Cristalografia por Raios X , Modelos MolecularesRESUMO
The asymmetric unit of the title compound, Rb(+)·C(4)H(3)N(2)O(3) (-)·C(4)H(4)N(2)O(3)·H(2)O, consists of one rubidium cation, a barbituric acid mol-ecule, a barbiturate anion and one water mol-ecule. The rubidium ion has seven close-contact inter-actions with O atoms, with Rbâ¯O distances ranging from 2.8594â (16) to 3.2641â (14)â Å. These seven O atoms together with an eighth O atom at 3.492â (2)â Å away from Rb form a distorted polyhedron with shape inter-mediate between an anti-prism and a dodeca-hedron. The Rb(+) ions connect layers built of organic components and water mol-ecules linked via N-Hâ¯O and O-Hâ¯O hydrogen bonds.
RESUMO
The title compound, C(19)H(13)N(5)O(3), can be obtained from the corresponding α-amido-α-amino-nitrone in a reaction with biphenyl-2,2'-diamine. The amido-amidine core has distinctive geometrical parameters including: an outstandingly long Csp(2)-Csp(2) single bond of 1.5276â (13)â Å and an amidine N-C-N angle of 130.55â (9)°. Intra-molecular N-Hâ¯O, N-Hâ¯N and C-Hâ¯O hydrogen bonds occur. In the crystal, mol-ecules form layers parallel to (001) via weak inter-molecular C-Hâ¯N inter-actions. The layers are linked via N-Hâ¯O hydrogen bonds and π-π inter-actions along [001] [benzene-pyridine centroid-centroid distance = 3.672â (2)â Å].
RESUMO
High-resolution single-crystal X-ray diffraction measurements at 100 K were performed for the two polymorphs of urea-barbituric acid co-crystals: (I) P2(1)/c and (II) Cc. Experimental and theoretical charge density and its properties were analysed for (I) and (II) in order to confirm the previous observation that in the polymorphs studied the barbituric acid molecules adopt different mesomeric forms, leading to different hydrogen-bond systems. Koch and Popelier criteria were applied to distinguish between hydrogen bonds and van der Waals interactions in the structures presented.
RESUMO
The crystal structures of three polymorphs found for the addition complex of urea and barbituric acid are described and compared. Two polymorphs are monoclinic, space groups P2(1)/c and Cc, whereas the third is triclinic, P1. The displacement of electron density towards the mesomeric forms, corresponding to the tautomeric forms of higher stability, of the barbituric acid molecule seem to influence the type of hydrogen bonds formed, which in turn determines the different packing topology in the polymorphs. While the polymorphic forms can be easily differentiated at the first-level graph-set analysis of their hydrogen-bonding patterns, a higher-level analysis enables important features of the mutual spatial arrangement of the structural components to be revealed.