RESUMO
As an important precursor of secondary inorganic aerosols (SIAs), ammonia (NH3) plays a key role in fine particulate matter (PM2.5) formation. In order to investigate its impacts on haze formation in the North China Plain (NCP) during winter, NH3 concentrations were observed at a high-temporal resolution of 1 min by using the SP-DOAS in Tai'an from December 2021 to February 2022. During the observation period, the average NH3 concentration was 11.84 ± 5.9 ppbv, and it was determined as an ammonia-rich environment during different air quality conditions. Furthermore, the average concentrations of sulfate (SO42-), nitrate (NO3-) and ammonium (NH4+) were 9.54 ± 5.97 µg/m3, 19.09 ± 14.18 µg/m3 and 10.72 ± 6.53 µg/m3, respectively. Under the nitrate-dominated atmospheric environment, aerosol liquid water content (ALWC) was crucial for NH3 particle transformation during haze aggravation, and the gas-particle partitioning of ammonia played an important role in the SIAs formation. The reconstruction of the molecular composition further indicated that ammonium nitrate (NH4NO3) plays a dominant role in the increase of PM2.5 during haze events. Consequently, future efforts to mitigate fine particulate pollution in this region should focus on controlling NH4NO3 levels. In ammonia-rich environments, NO3- formation is more dependent on the concentration of nitric acid (HNO3). The sensitive analysis of TNO3 (HNO3 + NO3-) and NHX (NH3 + NH4+) reduction using the thermodynamic model suggested that the NO3- concentration decreases linearly with the reduction of TNO3. And the concentration of NO3- decreases rapidly only when NHX is reduced by 50-60 %. Reducing NOX emissions is the most effective way to alleviate nitrate pollution in this region.
RESUMO
Ozone (O3) profiles are crucial for comprehending the intricate interplay among O3 sources, sinks, and transport. However, conventional O3 monitoring approaches often suffer from limitations such as low spatiotemporal resolution, high cost, and cumbersome procedures. Here, we propose a novel approach that combines multiaxis differential optical absorption spectroscopy (MAX-DOAS) and machine learning (ML) technology. This approach allows the retrieval of O3 profiles with exceptionally high temporal resolution at the minute level and vertical resolution reaching the hundred-meter scale. The ML models are trained using parameters obtained from radiative transfer modeling, MAX-DOAS observations, and a reanalysis data set. To enhance the accuracy of retrieving the aqueous phosphorus from O3, we employ a stacking approach in constructing ML models. The retrieved MAX-DOAS O3 profiles are compared to data from an in situ instrument, lidar, and satellite observation, demonstrating a high level of consistency. The total error of this approach is estimated to be within 25%. On balance, this study is the first ground-based passive remote sensing of high time-height-resolved O3 distribution from ground to the stratopause (0-60 km). It opens up new avenues for enhancing our understanding of the dynamics of O3 in atmospheric environments. Moreover, the cost-effective and portable MAX-DOAS combined with this versatile profiling approach enables the potential for stereoscopic observations of various trace gases across multiple platforms.
Assuntos
Aprendizado de Máquina , Ozônio , Monitoramento Ambiental/métodosRESUMO
In recent years, DNA origami-based nanocarriers have been extensively utilized for efficient cancer therapy. However, developing a nanocarrier capable of effectively protecting cargos such as RNA remains a challenge. In this study, we designed a compact and controllable DNA tubular origami (DTO) measuring 120 nm in length and 18 nm in width. The DTO exhibited appropriate structural characteristics for encapsulating and safeguarding cargo. Inside the DTO, we incorporated 20 connecting points to facilitate the delivery of cargoes to various ovarian and normal epithelial cell lines. Specifically, fluorescent-labeled DNA strands were attached to these sites as cargoes. The DTO was engineered to open upon encountering miR-21 through RNA/DNA strand displacement. Significantly, for the first time, we inhibited fluorescence using the compact DNA nanotube and observed dynamic fluorescent signals, indicating the controllable opening of DTO through live-cell imaging. Our results demonstrated that the DTO remained properly closed, exhibited effective internalization in ovarian cancer cells in vitro, showcasing marked differential expression of miR-21, and efficiently opened with short-term exposure to miR-21. Leveraging its autonomous behavior and compact design, the DTO emerges as a promising nanocarrier for various clinically relevant materials. It holds significant application prospects in anti-cancer therapy and the development of flexible biosensors.
RESUMO
OBJECTIVE: To evaluate the detection ability of vitamin B_1 and vitamin B_(2 )in rice flour in the laboratories of disease control and prevention system, by conducting the proficiency testing(PT)activity. METHODS: Before the vitamin B_1 and vitamin B_2 quality control samples were distributed to the laboratories of disease control and prevention system, the uniformity and stability of samples were analyzed by one-way ANOVO respectively. High performance liquid chromatography(HPLC) method was required to determine vitamin B_1(GB 5009.84-2016: determination of vitamin B_1 in food, first method as reference). HPLC method was also required to determine vitamin B_2(GB 5009.85-2016: determination of vitamin B_2 in food, first method as reference). Robust statistics analysis of proficiency testing result was conducted to evaluate laboratory testing ability through Z score. RESULTS: A total of 43 laboratories completed the proficiency testing. In all of the laboratories participated in the determination of vitamin B_(1 )and vitamin B_2, the total satisfactory rate of vitamin B_1 was 88.4%, while vitamin B_2 was 86.0%. CONCLUSION: The ability of vitamin B_1 and vitamin B_2 detection in disease control and prevention system in China is better than expected, and the testing ability of a few laboratory needs to be improved.
Assuntos
Ensaio de Proficiência Laboratorial , Tiamina , China , Cromatografia Líquida de Alta Pressão , Riboflavina , VitaminasRESUMO
Nucleolin protein expression is higher on the ovarian cancer cell surface. AS1411, a DNA aptamer, can bind with nucleolin protein specifically. In this study, we developed HA and ST DNA tiles to assemble six AS1411 aptamers to deliver doxorubicin. In addition, to superior serum stability and drug loading, HA-6AS and ST-6AS outperformed TDN-AS in cellular uptake. HA-6AS and ST-6AS exhibited satisfactory targeted cytotoxicity and achieved resounding lysosomal escape. Moreover, when injected into nude mice subcutaneous xenograft models, HA-6AS reached the peak in tumor more quickly than ST-6AS, and better expressed the active targeting ability of AS1411. Our study suggests that designing appropriate DNA tiles to assemble different aptamers to deliver different chemotherapeutic drugs is a promising treatment for ovarian cancer.
RESUMO
The current cancer detection methods are heavily dependent on the component analysis of corresponding cancer antigens. There is a lack of effective and simple clinical methods of ovarian cancer screening, which hinders the early identification for ovarian cancer and its treatment. To develop a simple and rapid method for quantitative analysis of ovarian cancer, we developed a DNA strand displacement-based method and finished the rapid detection of miR-21 in ovarian cancer cells within 5 min by a one-step isothermal reaction. The fluorescence intensity trajectory had a good linear relationship with miR-21 concentrations in the range of 100 fM-100 nM, with a lower limit of 6.05 pM. This detection method is simple, faster, and accurate. Besides, it can be applied to detect the miRNA biomarkers of other cancers by changing the preset sequences of toehold.
RESUMO
PURPOSE: Three-dimensional (3D) scans with flat detector angiographic systems are widely used for neurointerventions by providing detailed vascular information. However, its associated radiation dose and streak metal artifact generated by implanted treatment devices remain issues. This work evaluates the feasibility and clinical value of volume of interest imaging combined with metal artifact reduction (VOI+MAR) to generate high quality 3D images with reduced radiation dose and metal artifacts. MATERIAL AND METHODS: Full volume (FV) and VOI scans were acquired in 25 patients with intracranial aneurysms and treated with either endovascular coiling (n=9) or stent assisted coiling (n=16) procedures. FV and VOI scans were reconstructed with conventional syngo DynaCT and VOI +MAR prototype software, respectively. RESULTS: Quantitative evaluation results demonstrated that compared with standard FV syngo DynaCT images, overall image quality was improved in the VOI+MAR reconstructed images, with streak metal artifacts considerably reduced or even removed; details of soft tissue in the vicinity of the metal devices was well preserved or recovered in the majority of cases. Radiation dose to patients calculated by dose area product was found to be significantly reduced using VOI scans. CONCLUSION: This study confirmed the feasibility of using VOI+MAR prototype software to achieve high image quality of a small volume of clinical interest and to reduce radiation dose. This technique has potential to improve patient safety and treatment outcomes.
Assuntos
Artefatos , Imageamento Tridimensional/métodos , Aneurisma Intracraniano/diagnóstico por imagem , Metais , Stents , Tomografia Computadorizada por Raios X/métodos , Adulto , Idoso , Idoso de 80 Anos ou mais , Algoritmos , Feminino , Humanos , Aneurisma Intracraniano/terapia , Masculino , Metais/efeitos adversos , Pessoa de Meia-Idade , Stents/efeitos adversosRESUMO
AIM: To evaluate the accuracy of three-dimensional (3D) images from two modalities-CT angiography (CTA) and digital subtraction angiography (DSA). Additionally, to explore the value of using preprocedural CTA for real-time guidance during neurointerventional procedures. MATERIALS AND METHODS: 25 patients with CTA-confirmed cerebral arterial lesions were enrolled. For 12 of these patients, 3D DSA images of the contrast medium-enhanced target vessel were acquired during the intervention and registered with the preprocedurally acquired CTA images for evaluation of the accuracy of image fusion, focusing on the target vessel and the lesion. For the other 13 patients, a low-dose non-contrast 3D angiographic scan was performed. The preprocedurally acquired CTA image was then registered with the coordinate of angiography and overlaid onto the live fluoroscopic image to provide interventional guidance. RESULTS: Based on visual inspection by two experienced physicians and quantitative evaluation, excellent accuracy in the 3D registration of the CTA and DSA was achieved for all 12 patients examined. Additionally, CTA could be used successfully to guide the interventional procedures, including both diagnostic DSA and stent treatment. The radiation dose and contrast medium use were compared with those used by conventional interventional procedures and both were found to be significantly reduced. CONCLUSIONS: 3D CTA and angiographic image fusion was approved as highly accurate for neurovasculature. Additionally, using the fusion technique to guide interventional procedures enhanced the workflow, and required much less radiation exposure and contrast medium use, thus helping to reduce potential risks and increase treatment safety.
Assuntos
Angiografia Digital/métodos , Angiografia por Tomografia Computadorizada/métodos , Imageamento Tridimensional/métodos , Aneurisma Intracraniano/diagnóstico por imagem , Procedimentos Neurocirúrgicos/métodos , Adulto , Idoso , Angiografia Digital/normas , Angiografia Cerebral/métodos , Angiografia Cerebral/normas , Angiografia por Tomografia Computadorizada/normas , Meios de Contraste , Feminino , Humanos , Imageamento Tridimensional/normas , Aneurisma Intracraniano/cirurgia , Masculino , Pessoa de Meia-Idade , Procedimentos Neurocirúrgicos/normas , Stents , Tomografia Computadorizada por Raios X/métodos , Tomografia Computadorizada por Raios X/normasRESUMO
Digital subtracted angiography (DSA) remains the gold standard for diagnosis of cerebral vascular diseases and provides intraprocedural guidance. This practice involves extensive usage of x-ray and iodinated contrast medium, which can induce side effects. In this study, we examined the accuracy of 3-dimensional (3D) registration of magnetic resonance angiography (MRA) and DSA imaging for cerebral vessels, and tested the feasibility of using preprocedural MRA for real-time guidance during endovascular procedures.Twenty-three patients with suspected intracranial arterial lesions were enrolled. The contrast medium-enhanced 3D DSA of target vessels were acquired in 19 patients during endovascular procedures, and the images were registered with preprocedural MRA for fusion accuracy evaluation. Low-dose noncontrasted 3D angiography of the skull was performed in the other 4 patients, and registered with the MRA. The MRA was overlaid afterwards with 2D live fluoroscopy to guide endovascular procedures.The 3D registration of the MRA and angiography demonstrated a high accuracy for vessel lesion visualization in all 19 patients examined. Moreover, MRA of the intracranial vessels, registered to the noncontrasted 3D angiography in the 4 patients, provided real-time 3D roadmap to successfully guide the endovascular procedures. Radiation dose to patients and contrast medium usage were shown to be significantly reduced.Three-dimensional MRA and angiography fusion can accurately generate cerebral vasculature images to guide endovascular procedures. The use of the fusion technology could enhance clinical workflow while minimizing contrast medium usage and radiation dose, and hence lowering procedure risks and increasing treatment safety.