Multifunctional microwave absorption materials: construction strategies and functional applications.

The widespread adoption of wireless communication technology, especially with the introduction of artificial intelligence and the Internet of Things, has greatly improved our quality of life. However, this progress has led to increased electromagnetic (EM) interference and pollution issues. The development of advanced microwave absorbing materials (MAMs) is one of the most feasible solutions to solve these problems, and has therefore received widespread attention. However, MAMs still face many limitations in practical applications and are not yet widely used. This paper presents a comprehensive review of the current status and future prospects of MAMs, and identifies the various challenges from practical application scenarios. Furthermore, strategies and principles for the construction of multifunctional MAMs are discussed in order to address the possible problems that are faced. This article also presents the potential applications of MAMs in other fields including environmental science, energy conversion, and medicine. Finally, an analysis of the potential outcomes and future challenges of multifunctional MAMs are presented.

MXene-based fibers: Preparation, applications, and prospects.

With the vigorous development and huge demand for portable wearable devices, wearable electronics based on functional fibers continue to emerge in a wide range of energy storage, motion monitoring, disease prevention, electromagnetic interference (EMI) shielding, etc. MXene, as an emerging two-dimensional inorganic compound, has shown great potential in functional fiber manufacturing and has attracted much research attention due to its own good mechanical properties, high electrical conductivity, excellent electrochemical properties and favorable processability. Herein, this paper reviews recent advances of MXene-based fibers. Speaking to MXene dispersions, the properties of MXene dispersions including dispersion stability, rheological properties and liquid crystalline properties are highlighted. The preparation techniques used to produce MXene-based fibers and application progress regarding MXene-based fibers into supercapacitors, sensors, EMI shielding and Joule heaters are summarized. Challenges and prospects surrounding the development of MXene-based fibers are proposed in future. This review aims to provide processing guidelines for MXene-based fiber manufacturing, thereby achieving more possibilities of MXene-based fibers in advanced applications with a view to injecting more vitality into the field of smart wearables.

Multifunctional electromagnetic wave absorbing carbon fiber/Ti3C2TX MXene fabric with superior near-infrared laser dependent photothermal antibacterial behaviors.

Developing multifunctional materials which could simultaneously possess anti-bacterial ability and electromagnetic (EM) absorption ability during medical care is quite essential since the EM waves radiation and antibiotic-resistant bacteria are threatening people's health. In this work, the multifunctional carbon fiber/Ti3C2Tx MXene (CM) were synthesized through repeated dip-coating and following in-situ growth method. The as-fabricated CF/MXene displayed outstanding EM wave absorption and highly efficient photothermal converting ability. The minimum reflection loss (RL) of -57.07 dB and ultra-broad absorption of 7.74 GHz could be achieved for CM composites. By growth of CoNi-layered double hydroxides (LDHs) sheets onto MXene, the absorption bandwidth for carbon fiber/Ti3C2Tx MXene layered double hydroxides (CML) could be reach 5.44 GHz, which could cover the whole Ku band. The excellent photothermal effect endow the CM composites with excellent antibacterial performance. The antibacterials tests indicated that nearly 100 % bactericidal efficiency against E. acoil and S. aureus was obtained for the CM composite after exposure to near-infrared region (NIR) irradiation. This work provides a promising candidate to combat medical device-related infections and EM pollution.

Consistent Thermal Conductivities of Spring-Like Structured Polydimethylsiloxane Composites under Large Deformation.

Flexible and highly thermally conductive materials with consistent thermal conductivity (λ) during large deformation are urgently required to address the heat accumulation in flexible electronics. In this study, spring-like thermal conduction pathways of silver nanowire (S-AgNW) fabricated by 3D printing are compounded with polydimethylsiloxane (PDMS) to prepare S-AgNW/PDMS composites with excellent and consistent λ during deformation. The S-AgNW/PDMS composites exhibit a λ of 7.63 W m-1 K-1 at an AgNW amount of 20 vol%, which is ≈42 times that of PDMS (0.18 W m-1 K-1) and higher than that of AgNW/PDMS composites with the same amount and random dispersion of AgNW (R-AgNW/PDMS) (5.37 W m-1 K-1). Variations in the λ of 20 vol% S-AgNW/PDMS composites are less than 2% under a deformation of 200% elongation, 50% compression, or 180° bending, which benefits from the large deformation characteristics of S-AgNW. The heat-transfer coefficient (0.29 W cm-2 K-1) of 20 vol% S-AgNW/PDMS composites is ≈1.3 times that of the 20 vol% R-AgNW/PDMS composites, which reduces the temperature of a full-stressed central processing unit by 6.8 °C compared to that using the 20 vol% R-AgNW/PDMS composites as a thermally conductive material in the central processing unit.

2D/2D coupled MOF/Fe composite metamaterials enable robust ultra-broadband microwave absorption.

The combination between macroscopic structure designs and microscopic material designs offers tremendous possibilities for the development of advanced electromagnetic wave (EMW) absorbers. Herein, we propose a metamaterial design to address persistent challenges in this field, including narrow bandwidth, low-frequency bottlenecks, and, particularly, the urgent issue of robustness (i.e., oblique, and polarized incidence). Our absorber features a semiconductive metal-organic framework/iron 2D/2D assembly (CuHT-FCIP) with abundant crystal/crystal heterojunctions and strong magneto-electric coupling networks. This design achieves remarkable EMW absorption across a broad range (2 to 40 GHz) at a thickness of just 9.3 mm. Notably, it maintains stable performance against oblique incidence (within 75°) and polarizations (both transverse electric and transverse magnetic). Furthermore, the absorber demonstrates high specific compressive strength (201.01 MPa·cm3·g-1) and low density (0.89 g·cm-3). This advancement holds promise for developing robust EMW absorbers with superior performance.

Highly Thermally Conductive Aramid Nanofiber Composite Films with Synchronous Visible/Infrared Camouflages and Information Encryption.

The development of highly thermally conductive composites that combine visible light/infrared camouflage and information encryption has been endowed with great significance in facilitating the application of 5G communication technology in military fields. This work uses aramid nanofibers (ANF) as the matrix, hetero-structured silver nanowires@boron nitride nanosheets (AgNWs@BNNS) prepared by in situ growth as fillers, which are combined to fabricate sandwich structured thermally conductive and electrically insulating (BNNS/ANF)-(AgNWs@BNNS)-(BNNS/ANF) (denoted as BAB) composite films by "filtration self-assembly, air spraying, and hot-pressing" method. When the mass ratio of AgNWs@BNNS to BNNS is 1 : 1 and the total mass fraction is 50 wt %, BAB composite film has the maximum in-plane thermal conductivity coefficient (λ∥ of 10.36 W/(m ⋅ K)), excellent electrical insulation (breakdown strength and volume resistivity of 41.5 kV/mm and 1.21×1015â€…Ω â‹… cm, respectively) and mechanical properties (tensile strength of 170.9 MPa). 50 wt % BAB composite film could efficiently reduce the equilibrium temperature of the central processing unit (CPU) working at full power, resulting in 7.0 °C lower than that of the CPU solely integrated with ANF directly. In addition, BAB composite film boasts adaptive visible light/infrared dual camouflage properties on cement roads and jungle environments, as well as the function of fast encryption of QR code information within 24 seconds.

Modified acid polysaccharide derived from Salvia przewalskii with excellent wound healing and enhanced bioactivity.

Acid polysaccharide was extracted from Salvia przewalskii root powders (PSP), purified by diethylaminoethyl cellulose column (DEAE-52) and molecular sieve (PSP2). PSPm1 was obtained by modifying PSP2 with nitrite and phosphoric acid. The chemical structure of PSP2 and PSPm1 exhibited notable distinctions, primarily due to the absence of arabinose and promotion of glucuronic acid (GlcA). The structure of PSPm1 was deduced through the utilization of 1H, 13C, and 2-D NMR. The main chain was linked by α-D-Galp(1 â†’ 3)-α-Glcp-(1 â†’ fragments and →6)-ß-D-Galp fragments, with the presence of →4)-α-D-GlcpA-(1 â†’ 6)-ß-D-Galp-(1 â†’ ï¼Œ â†’ 4)-α-D-GalAp-(1 â†’ 2,4)-α-D-Rhap-(1 â†’ fragments and →6)-α-Glcp-(1 â†’ 2,4)-ß-D-Manp-(1 â†’ fragments. PSPm1 exhibited different immunoregulatory bioactivity in vitro, including haemostatic effects indicated by activated clotting time of 55.5 % reduction by the activated clotting time (ACT) test and wound healing function in vivo. PSPm1 also displayed better anti-tumor biological effects than unmodified. The structure-activity dissimilarity between PSP2 and PSPm1 primarily stems from variations in molecular weight (Mw), monosaccharide composition, and branching patterns. The modification of polysaccharides from the extract residues of Chinese medicinal materials may be a new form of drug supplements.

Effect of the Structure of Epoxy Monomers and Curing Agents: Toward Making Intrinsically Highly Thermally Conductive and Low-Dielectric Epoxy Resins.

The low intrinsic thermal conduction and high dielectric properties of epoxy resins have significantly limited their applications in electrical and electronic devices with high integration, high frequency, high power, and miniaturization. Herein, a liquid crystalline epoxy (LCE) monomer with a biphenyl mesogenic unit was first synthesized through an efficient one-step reaction. Subsequently, bisphenol AF (BPAF) containing low-polarizable -CF3 groups and 4,4'-diaminodiphenylmethane (DDM) were applied to cure the LCE and commercial diglycidyl ether of bisphenol A-type epoxy (E-51), respectively, to afford four kinds of epoxy resins with various intrinsic thermal conductivity and dielectricity values. Owing to the dual effect of microscopically stacking of mesogens and the contribution of fluorine to the formation of liquid crystallinity, ordered microstructures of the nematic liquid crystal phase were formed within the cross-linking network of LCE as confirmed by polarized optical microscopy and X-ray diffraction. Consequently, phonon scattering was suppressed, and the intrinsic thermal conductivity was improved considerably to 0.38 W/(m·K), nearly twice as high as that of E-51 cured with DDM (0.20 W/(m·K)). Additionally, the ordered microstructure and ultralow polar -CF3 groups within LCE cured with BPAF enabled the epoxy resin to exhibit a remarkably lower and stable dielectric constant (ε) and dielectric loss tangent (tan δ) over both low and high frequencies compared to E-51 cured with DDM. The ε decreased from 3.40 to 2.72 while the tan δ decreased from 0.044 to 0.038 at 10 GHz. This work presents a scalable and facile strategy for breaking the bottleneck of making epoxy resins simultaneously with high inherent thermal conduction and low dielectric performance.

Layered Structural PBAT Composite Foams for Efficient Electromagnetic Interference Shielding.

The utilization of eco-friendly, lightweight, high-efficiency and high-absorbing electromagnetic interference (EMI) shielding composites is imperative in light of the worldwide promotion of sustainable manufacturing. In this work, magnetic poly (butyleneadipate-co-terephthalate) (PBAT) microspheres were firstly synthesized via phase separation method, then PBAT composite foams with layered structure was constructed through the supercritical carbon dioxide foaming and scraping techniques. The merits of integrating ferroferric oxide-loaded multi-walled carbon nanotubes (Fe3O4@MWCNTs) nanoparticles, a microcellular framework, and a highly conductive silver layer have been judiciously orchestrated within this distinctive layered configuration. Microwaves are consumed throughout the process of "absorption-reflection-reabsorption" as much as possible, which greatly declines the secondary radiation pollution. The biodegradable PBAT composite foams achieved an EMI shielding effectiveness of up to 68 dB and an absorptivity of 77%, and authenticated favorable stabilization after the tape adhesion experiment.

Flexible and Robust Functionalized Boron Nitride/Poly(p-Phenylene Benzobisoxazole) Nanocomposite Paper with High Thermal Conductivity and Outstanding Electrical Insulation.

With the rapid development of 5G information technology, thermal conductivity/dissipation problems of highly integrated electronic devices and electrical equipment are becoming prominent. In this work, "high-temperature solid-phase & diazonium salt decomposition" method is carried out to prepare benzidine-functionalized boron nitride (m-BN). Subsequently, m-BN/poly(p-phenylene benzobisoxazole) nanofiber (PNF) nanocomposite paper with nacre-mimetic layered structures is prepared via sol-gel film transformation approach. The obtained m-BN/PNF nanocomposite paper with 50 wt% m-BN presents excellent thermal conductivity, incredible electrical insulation, outstanding mechanical properties and thermal stability, due to the construction of extensive hydrogen bonds and π-π interactions between m-BN and PNF, and stable nacre-mimetic layered structures. Its λ∥ and λ⊥ are 9.68 and 0.84 W m-1 K-1, and the volume resistivity and breakdown strength are as high as 2.3 × 1015 Ω cm and 324.2 kV mm-1, respectively. Besides, it also presents extremely high tensile strength of 193.6 MPa and thermal decomposition temperature of 640 °C, showing a broad application prospect in high-end thermal management fields such as electronic devices and electrical equipment.

A comprehensive pan-cancer analysis of CDH5 in immunological response.

Background: Cadherin 5 (CDH5) functions critically in maintaining cell adhesion and integrity of endothelial and vascular cells. The expression of CDH5 is abnormal in tumor cells, which may have great potential to serve as a new immune checkpoint. The current pan-cancer analysis was performed to better understand the role of CDH5 in tumor. Methods: The clinical significance and immunological function of CDH5 in pan-cancers were comprehensively analyzed based on the correlations between CDH5 and clinicopathologic features, prognosis values, tumor mutation burden (TMB), microsatellite instability (MSI), immune cells infiltration and immune response genes using 33 datasets from The Cancer Genome Atlas (TCGA). We further confirmed the expression of CDH5 in bladder cancer (BCa) tissues and cell lines. The CD8+ T cells were screened from peripheral blood of healthy controls and activated. BCa cell-CD8+ T cell co-culture assay and ELISA assay were carried out to verify the immunological function of CDH5. Results: The expression of CDH5 was down-regulated in 8 types of tumors including in BCa but up-regulated in 4 types of tumors. CDH5 was significantly correlated with tumor stage in 6 types of tumors. In addition, CDH5 was positively or negatively correlated with tumor prognosis. Furthermore, CDH5 was closely associated with TMB in 15 types of tumors and with MSI in 9 types of tumors. KEGG-GSEA and Hallmarks-GSEA analyses results indicated that CDH5 was positively related to immune response in most tumor types. In many tumors, CDH5 showed a positive correlation with immune cell infiltration. Enrichment analyses demonstrated that CDH5 was significantly related to the expression of many immunomodulators and chemokines. Further experiments showed that CDH5 was low-expressed in BCa tissues and cell lines in comparison to adjacent normal tissues and normal urothelial cell line, but it was positively associated with a better prognosis of BCa patients. The results of in vitro co-culture assay and ELISA assay demonstrated that CDH5 could promote the function of CD8+ T cells in TME of BCa. Conclusion: In summary, CDH5 was positively associated with a favorable prognosis and effective immune response in tumors, showing a great potential to serve as a novel tumor biomarker and immune checkpoint.

Carbon-Based Radar Absorbing Materials toward Stealth Technologies.

Stealth technology is used to enhance the survival of military equipment in the field of military surveillance, as it utilizes a combination of techniques to render itself undetectable by enemy radar systems. Radar absorbing materials (RAMs) are specialized materials used to reduce the reflection (or absorption) of radar signals to provide stealth capability, which is a core component of passive countermeasures in military applications. The properties of RAMs can be optimized by adjusting their composition, microstructure, and surface geometry. Carbon-based materials present a promising approach for the fabrication of ultrathin, versatile, and high-performance RAMs due to their large specific surface area, lightweight, excellent dielectric properties, high electrical conductivity, and stability under harsh conditions. This review begins with a brief history of stealth technology and an introduction to electromagnetic waves, radar systems, and radar absorbing materials. This is followed by a discussion of recent research progress in carbon-based RAMs, including carbon blacks, carbon fibers, carbon nanotubes, graphite, graphene, and MXene, along with an in-depth examination of the principles and strategies on electromagnetic attenuation characteristics. Hope this review will offer fresh perspectives on the design and fabrication of carbon-based RAMs, thereby fostering a deeper fundamental understanding and promoting practical applications.

Electric-Field-Induced Alignment of Functionalized Carbon Nanotubes Inside Thermally Conductive Liquid Crystalline Polyimide Composite Films.

The positive liquid crystals, 4'-heptyl-4-biphenylcarbonitrile (7CB), are used to functionalize carbon nanotubes (LC-CNT), which can be aligned in the liquid crystalline polyimide (LC-PI) matrix under an alternating electric field to fabricate the thermally conductive LC-CNT/LC-PI composite films. The efficient establishment of thermal conduction pathways in thermally conductive LC-CNT/LC-PI composite films with a low amount of LC-CNT is achieved through the oriented alignment of LC-CNT within the LC-PI matrix. When the mass fraction of LC-CNT is 15 wt %, the in-plane thermal conductivity coefficient (λ∥ ) and the through-plane thermal conductivity coefficient (λ⊥ ) of the LC-CNT/LC-PI composite films reach 4.02 W/(m ⋅ K) and 0.55 W/(m⋅K), which are 90.5 % and 71.9 % higher than those of the intrinsically thermally conductive LC-PI films respectively, also 28.8 % and 5.8 % higher than those of the CNT/LC-PI composite films respectively. Meanwhile, the thermally conductive LC-CNT/LC-PI composite films also possess excellent mechanical and heat resistance properties. The Young's modulus and the heat resistance index are 2.3 GPa and 297.7 °C, respectively, which are higher than the intrinsically thermally conductive LC-PI films and the thermally conductive CNT/LC-PI composite films under the same amount of CNT.

External field-assisted techniques for polymer matrix composites with electromagnetic interference shielding.

The rapid development of mobile devices has greatly improved the lives of people, but they have also caused problems with electromagnetic interference (EMI) and information security. Therefore, there is an urgent need to develop high performance EMI shielding materials to suppress electromagnetic radiation and prevent information leakage. Some reports point out that the self-orientation behavior of fillers under external forces contributes to the improvement of EMI shielding performance. So how to construct an effective filler orientation structure in the polymer matrix is becoming a hot topic in the research of EMI shielding materials. In view of the fact that there are few reports on the preparation of polymer matrix EMI shielding composites by external field induction, from this perspective, we first highly focus on strategies for the construction of conductive networks within composites based on external field induction. Subsequently, the research progress on the preparation of polymer matrix EMI shielding composites by inducing the orientation of inorganic fillers through external fields, including temperature, electrostatic, gravity, mechanical force and magnetic fields, is organized and sorted out in detail. Notably, the particular response relationship between the unique composite structures prepared by external field induction and the incident electromagnetic waves is further dissected. Finally, the key scientific problems that need to be solved in the preparation of polymer matrix EMI shielding composites assisted by external fields are proposed. The approach discussed and the strategies proposed are expected to provide some guidance for the innovative design of high-performance polymer matrix EMI shielding composites.

Advances and mechanisms in polymer composites toward thermal conduction and electromagnetic wave absorption.

Polymer composites have essential applications in electronics due to their versatility, stable performance, and processability. However, with the increasing miniaturization and high power of electronics in the 5G era, there are significant challenges related to heat accumulation and electromagnetic wave (EMW) radiation in narrow spaces. Traditional solutions involve using either thermally conductive or EMW absorbing polymer composites, but these fail to meet the demand for multi-functional integrated materials in electronics. Therefore, designing thermal conduction and EMW absorption integrated polymer composites has become essential to solve the problems of heat accumulation and electromagnetic pollution in electronics and adapt to its development trend. Researchers have developed different approaches to fabricate thermal conduction and EMW absorption integrated polymer composites, including integrating functional fillers with both thermal conduction and EMW absorption functions and innovating processing methods. This review summarizes the latest research progress, factors that affect performance, and the mechanisms of thermal conduction and EMW absorption integrated polymer composites. The review also discusses problems that limit the development of these composites and potential solutions and development directions. The aim of this review is to provide references for the development of thermal conduction and EMW absorption integrated polymer composites.

Clinical Study on the Emotional Intervention of Patients with Asymptomatic and Mild Novel Coronavirus (COVID-19).

Background and Objectives: The aim was to explore the interventional effect of the traditional Chinese medicine (TCM) exercise of Tian Dan Shugan Tiaoxi on the emotions of patients with mild novel coronavirus (COVID-19). Materials and Methods: A total of 110 asymptomatic and mildly symptomatic COVID-19 patients from Hongkou Memorial Road Temporary Cabin Hospital and South Renji Hospital were selected between April 2022 and June 2022, and randomly divided into two groups: a control group and an intervention group. There were 55 participants in each group. The control group was treated with Lianhua Qingwen granules, and members of the intervention group were made to practice Tian Dan Shugan Tiaoxi (an exercise that soothes the liver and regulates emotions) every day for 5 days. The Patient Health Questionnaire-9 (PHQ-9), the Generalized Anxiety Disorder questionnaire (GAD-7), and the Symptom Checklist 90 (SCL-90) were used to evaluate the data collected before and after the trial. Results: The incidence of anxiety and depression was high in the patients included in this study, at 73.64% and 69.09%, respectively. After intervention, the scores of the Patient Health Questionnaire-9 (PHQ-9) and the Generalized Anxiety Disorder questionnaire (GAD-7) in the two groups had decreased in comparison with those recorded before intervention (p < 0.05). The PHQ-9 and GAD-7 scores in the intervention group were significantly better than those of the control group (p < 0.05). The factors of somatization, depression, anxiety, hostility, and fear in the SCL-90 in the intervention group were significantly improved after intervention, and generally, better than those in the control group (p < 0.05). Conclusions: Patients infected with novel coronavirus in shelter hospitals have different degrees of emotional abnormalities. Tian Dan Shugan Tiaoxi can reduce the anxiety and depression of people with mild novel coronavirus, and it can be practiced clinically to improve the recovery rate among infected people.

LncRNA PRKCQ-AS1 regulates paclitaxel resistance in triple-negative breast cancer cells through miR-361-5p/PIK3C3 mediated autophagy.

Paclitaxel (PTX) resistance is a key cause of chemotherapy failure in patients with triple negative breast cancer (TNBC). The aim of this study is to investigate the effect and mechanism of long non-coding RNA (lncRNA) on the PTX resistance of TNBC cells through autophagy. MDA-MB-231 cells are used to induce the PTX-resistant TNBC cell line MDA-MB-231.PR (MDR) by increasing dose intermittently. Quantitative real-time polymerase chain reaction (qRT-PCR) was used to validate the mRNA levels of phosphoinositide-3-kinase class 3 (PIK3C3), miR-361-5p and lncRNA PRKCQ-AS1 in the cells, and Western blot analysis was used to detect the protein expressions of PIK3C3, autophagy-related, drug-resistant and apoptosis-related genes. MDC staining detected the formation of autophagic vacuoles. The interactions between miR-361-5p and PIK3C3 and between lncRNA PRKCQ-AS1 and miR-361-5p were verified by dual-luciferase assay. Cell viability, apoptosis, migration and invasion were assessed by performing MTT, flow cytometry assay, and transwell assay. The mRNA level of miR-361-5p and the autophagy and drug resistance levels of TNBC PTX-resistant cells were significantly up-regulated. miR-361-5p could target autophagy-related gene PIK3C3, and overexpression of miR-361-5p could down-regulate PIK3C3 protein expression and autophagy level and PTX resistance of MDR cells. LncRNA PRKCQ-AS1 was selected through bioanalysis, and miR-361-5p could target lncRNA PRKCQ-AS1. In addition, lncRNA PRKCQ-AS1 level was up-regulated in TNBC PTX-resistant cells, and knockdown of lncRNA PRKCQ-AS1 could weaken autophagy and drug resistance level and could promote cell apoptosis. Overexpression of lncRNA PRKCQ-AS1 reversed the pro-apoptotic effect and down-regulation of autophagy and resistance levels was induced by miR-361-5p. In vivo experiments were performed to verify the role of lncRNA PRKCQ-AS1. We demonstrate that down-regulation of lncRNA PRKCQ-AS1 weakened PTX resistance and promoted cell apoptosis by miR-361-5p/PIK3C3 mediated autophagy.

RBBP4 regulates the expression of the Mre11-Rad50-NBS1 (MRN) complex and promotes DNA double-strand break repair to mediate glioblastoma chemoradiotherapy resistance.

For treatment of glioblastoma (GBM), temozolomide (TMZ) and radiotherapy (RT) exert antitumor effects by inducing DNA double-strand breaks (DSBs), mainly via futile DNA mismatch repair (MMR) and inducing apoptosis. Here, we provide evidence that RBBP4 modulates glioblastoma resistance to chemotherapy and radiotherapy by recruiting transcription factors and epigenetic regulators that bind to their promoters to regulate the expression of the Mre11-Rad50-NBS1(MRN) complex and the level of DNA-DSB repair, which are closely associated with recovery from TMZ- and radiotherapy-induced DNA damage in U87MG and LN229 glioblastoma cells, which have negative MGMT expression. Disruption of RBBP4 induced GBM cell DNA damage and apoptosis in response to TMZ and radiotherapy and enhanced radiotherapy and chemotherapy sensitivity by the independent pathway of MGMT. These results displayed a possible chemo-radioresistant mechanism in MGMT negative GBM. In addition, the RBBP4-MRN complex regulation axis may provide an interesting target for developing therapy-sensitizing strategies for GBM.

Controlled Distributed Ti3 C2 Tx Hollow Microspheres on Thermally Conductive Polyimide Composite Films for Excellent Electromagnetic Interference Shielding.

Flexible multifunctional polymer-based electromagnetic interference (EMI) shielding composite films have important applications in the fields of 5G communication technology, wearable electronic devices, and artificial intelligence. Based on the design of a porous/multilayered structure and using polyimide (PI) as the matrix and polymethyl methacrylate (PMMA) microspheres as the template, flexible (Fe3 O4 /PI)-Ti3 C2 Tx -(Fe3 O4 /PI) composite films with controllable pore sizes and distribution of Ti3 C2 Tx hollow microspheres are successfully prepared by sacrificial template method. Owing to the porous/multilayered structure, when the pore size of the Ti3 C2 Tx hollow microspheres is 10 µm and the mass ratio of PMMA/Ti3 C2 Tx is 2:1, the (Fe3 O4 /PI)-Ti3 C2 Tx -(Fe3 O4 /PI) composite film has the most excellent EMI shielding performance, with EMI shielding effectiveness (EMI SE) of 85 dB. It is further verified by finite element simulation that the composite film has an excellent shielding effect on electromagnetic waves. In addition, the composite film has good thermal conductivity (thermal conductivity coefficient of 3.49 W (m·K)-1 ) and mechanical properties (tensile strength of 65.3 MPa). This flexible (Fe3 O4 /PI)-Ti3 C2 Tx -(Fe3 O4 /PI) composite film with excellent EMI shielding performance, thermal conductivity, and mechanical properties has demonstrated great potential for applications in EMI shielding protection for high-power, portable, and wearable flexible electronic devices.