Perception of aesthetic impairment in patients with systemic sclerosis determined using a semi-quantitative scale and its association with disease characteristics.

Background: Systemic sclerosis is a fibrotic disease. Body image assessments could be key in optimizing care; however, data are scarce. The main objective was to assess the perception of aesthetic impairment using a visual aesthetic evaluation scale in patients with systemic sclerosis compared with healthy subjects. The secondary objectives were to assess associations between the perception of aesthetic impairment and scores on standardized questionnaires for aesthetic impairment as well as clinical, psychological/quality of life, and functional parameters of patients with systemic sclerosis. Methods: This study evaluated and compared the perception of aesthetic impairment in two populations: patients with systemic sclerosis from a referral center at Lille Hospital, France, and healthy controls. Results: This study included 88 patients (69 (78.4%) women) with a median age of 52 years and 88 controls (49 (55.7%) women) with a median age of 45 years. The perception of aesthetic impairment assessed using the aesthetic evaluation scale was poorer in systemic sclerosis patients than in controls (3.7 ± 0.3 vs 2.8 ± 0.3, p = 0.028) and was statistically correlated with assessments using the adapted satisfaction with appearance, a specific aesthetic impact assessment questionnaire for patients with systemic sclerosis. Patients with anxiety or depressive symptoms had significantly higher aesthetic evaluation scale scores. Systemic sclerosis patients with facial involvement and pitting scars had a worse perception of aesthetic impairment. Compared with healthy controls, systemic sclerosis patients had a worse perception of aesthetic impairment, especially systemic sclerosis patients with anxiety or depression and those with facial and hand involvement. Conclusion: The aesthetic evaluation scale appears to be an easy-to-use tool to evaluate body image. Correlations of the aesthetic evaluation scale score with psychological and quality of life parameters reflect the importance of these parameters for body image evaluation and its complex assessment. Trial registration: Clinical Trial NCT03271320 (Registered 9 January 2017, https://www.clinicaltrials.gov/ct2/show/NCT03271320?term=NCT03271320&cntry=FR&draw=2&rank=1).

Engineering 3D-Printed Bioresorbable Scaffold to Improve Non-Vascularized Fat Grafting: A Proof-of-Concept Study.

Autologous fat grafting is the gold standard for treatment in patients with soft-tissue defects. However, the technique has a major limitation of unpredictable fat resorption due to insufficient blood supply in the initial phase after transplantation. To overcome this problem, we investigated the capability of a medical-grade poly L-lactide-co-poly ε-caprolactone (PLCL) scaffold to support adipose tissue and vascular regeneration. Deploying FDM 3D-printing, we produced a bioresorbable porous scaffold with interconnected pore networks to facilitate nutrient and oxygen diffusion. The compressive modulus of printed scaffold mimicked the mechanical properties of native adipose tissue. In vitro assays demonstrated that PLCL scaffolds or their degradation products supported differentiation of preadipocytes into viable mature adipocytes under appropriate induction. Interestingly, the chorioallantoic membrane assay revealed vascular invasion inside the porous scaffold, which represented a guiding structure for ingrowing blood vessels. Then, lipoaspirate-seeded scaffolds were transplanted subcutaneously into the dorsal region of immunocompetent rats (n = 16) for 1 or 2 months. The volume of adipose tissue was maintained inside the scaffold over time. Histomorphometric evaluation discovered small- and normal-sized perilipin+ adipocytes (no hypertrophy) classically organized into lobular structures inside the scaffold. Adipose tissue was surrounded by discrete layers of fibrous connective tissue associated with CD68+ macrophage patches around the scaffold filaments. Adipocyte viability, assessed via TUNEL staining, was sustained by the presence of a high number of CD31-positive vessels inside the scaffold, confirming the CAM results. Overall, our study provides proof that 3D-printed PLCL scaffolds can be used to improve fat graft volume preservation and vascularization, paving the way for new therapeutic options for soft-tissue defects.

Auricles Anomalies in Patients With a TCF12 Gene Mutation.

Craniostenosis is a morphological anomaly affecting about 0.5 of 1000 births and one third of the cases are of genetic origin. Among the syndromes responsible for craniostenosis, there is the Saethre-Chotzen syndrome due to a mutation of the TWIST 1 gene located on chromosome 7. This polymalformative syndrome classically includes a particular morphology of the auricles. The penetrance is variable and results in a phenotypic variability at the origin of "Saethre-Chotzen like" clinical pictures for which the TWIST 1 gene mutation is sometimes not found. Recently, the TCF 12 gene has been implicated in some of these cases. Among the multiple facial malformations, we have carefully examined the particular morphology of the auricle of these patients. The authors found several abnormalities in patients with a TCF 12 gene mutation, namely a thickened and hammered upper pole of the helix, a narrow concha without crux cymbae and a thickened lobe. These morphological features may guide the diagnosis and allow an earlier search for a TCF 12 gene mutation.

Preclinical Study of Radiation on Fat Flap Regeneration under Tissue-engineering Chamber: Potential Consequences for Breast Reconstruction.

Use of a tissue-engineering chamber (TEC) for growth of fat flap is a promising approach for breast reconstruction. Here, we evaluated in a preclinical model the effects of radiation on adipose tissue growth either before or after 3D-printed bioresorbable TEC implantation. Methods: Twenty-eight female Wistar rats were distributed into three groups: TEC implantation as nonirradiated controls (G1), TEC insertion followed by irradiation 3 weeks later (G2), and irradiation 6 weeks before TEC insertion (G3). G2 and G3 received 33.3 Gy in nine sessions of 3.7 Gy. Growth of the fat flap was monitored via magnetic resonance imaging. At 6 months after implantation, fat flaps and TECs were harvested for analysis. Results: Irradiation did not alter the physicochemical features of poly(lactic-co-glycolic acid)-based TECs. Compared with G1, fat flap growth was significantly reduced by 1.6 times in irradiated G2 and G3 conditions. In G2 and G3, fat flaps consisted of mature viable adipocytes sustained by CD31+ vascular cells. However, 37% (3 of 8) of the G2 irradiated adipose tissues presented a disorganized architecture invaded by connective tissues with inflammatory CD68 + cells, and the presence of fibrosis was observed. Conclusions: Overall, this preclinical study does not reveal any major obstacle to the use of TEC in a radiotherapy context. Although irradiation reduces the growth of fat flap under the TEC by reducing adipogenesis and inducing inconsistent fibrosis, it does not impact flap survival and vascularization. These elements must be taken into account if radiotherapy is proposed before or after TEC-based breast reconstruction.

Crouzon Syndrome Anatomy, Usefulness of Vestibular Orientation.

ABSTRACT: Spatial resolution of computerized tomographic scanner has reached a level to which accurate anatomic measurements could be done in. Three-dimensional accurate measurements require a reliable referential system. In craniology landmarks are usually selected in the skull base. For craniofacial malformation the classical landmarks are of no help so the authors have used the vestibular orientation to study a series of 50 Crouzon syndrome computerized tomographic scan and compare the results (shape, position, linear mensuration, volumes…) with 122 controls in unaffected patients. The authors have confirmed Crouzon description of a high level of polymorphism in phenotypes, the authors propose an organigram to understand the abnormal growth patterns in crouzon syndrome, which lead to such consequences. This polymorphism implies that the planning of surgical treatment should be tailored for each case.

Vismodegib in neoadjuvant treatment of locally advanced basal cell carcinoma: First results of a multicenter, open-label, phase 2 trial (VISMONEO study): Neoadjuvant Vismodegib in Locally Advanced Basal Cell Carcinoma.

BACKGROUND: Surgery is the primary treatment for basal cell carcinoma (BCC). In locally advanced basal cell carcinoma (laBCC), surgery may cause functional or aesthetic damage. In laBCC, neoadjuvant administration of vismodegib, an inhibitor of the Hedgehog signaling pathway, may reduce tumor size, facilitate resection, and reduce functional and aesthetic consequences of surgery. The VISMONEO study assessed efficacy and safety of vismodegib in neoadjuvant treatment of laBCC. METHODS: VISMONEO (NCT02667574) is an open-label, noncomparative, multicenter, phase 2 study. Patients with ≥1 histologically confirmed facial BCC, inoperable or operable with functional or major aesthetic sequelae risk, were included. Oral vismodegib 150 mg was administered once daily for 4 to 10 months before planned surgery, which was performed once the best response under vismodegib was observed. Primary endpoint was percentage of patients with BCC with tumor downstaging following surgical resection after neoadjuvant vismodegib. Downstaging was defined according to a 6-stage surgical classification related to the aesthetic and functional consequences of surgery. FINDINGS: 55 patients (median age: 73 years) with laBCC were included from November 2014 to June 2015. At inclusion, 4 patients were inoperable, 15 were operable with a major functional risk, and 36 were operable with a minor functional risk or a major aesthetic risk. Mean size of target lesion was 47.3 mm (SD: 27.2 mm). 44 patients presented with downstaging after vismodegib treatment (80%; 95% confidence interval [CI], 67 to 90). Of these 44 patients, 27 had a complete response (25 proved by biopsy). Mean treatment duration was 6.0 months. Overall Response Rate according to RECIST 1.1 criteria was 71% (95% CI, 59 to 88). At 3-years of follow-up, 16/44 patients had known recurrence (36%; 95%CI, 22 to 51). INTERPRETATION: Neoadjuvant vismodegib allows for a downstaging of the surgical procedure for laBCCs in functionally sensitive locations. FUNDING: VISMONEO was funded by F. Hoffmann-La Roche Ltd.

Morphological and surgical results in sagittal synostosis: early craniectomy versus later cranioplasty.

BACKGROUND AND PURPOSE: Morphological correction is one of the main aims of surgery for sagittal synostosis (SSO). Different surgical techniques have been developed; however, few studies have compared the different surgical protocols. The morphological outcome is poorly documented, because a consensual evaluation tool is lacking. MATERIAL AND METHODS: We performed a prospective study of children operated for SSO in our institution. Children were operated whenever possible at 4 months for craniectomy; by default, children underwent cranioplasty at or after 9 months. The morphological outcome of all children was evaluated using traditional craniometry with head circumference (HC) and the cephalic index (CI), and with the Rotterdam scaphocephaly morphology score (RSMS), a total of semi-quantitative assessments of morphological hallmarks. RESULTS: Craniectomy was significantly associated with a shorter operation time and hospital stay, and a better impact on HC and CI measurements, compared with cranioplasty. The RSMS was markedly improved after surgery in both groups; however, we found no significant difference in improvement between the two groups. Although the transfusion rate and the prevalence of developmental delay were lower in the craniectomy group, and reoperations for calvarial lacunae or complex craniosynostosis occurred only this group, these differences were not significant. CONCLUSIONS: Our results support early surgery with craniectomy whenever possible; however, cranioplasty at a later age is a very acceptable by-default indication. In addition to classical craniometry, morphological evaluation using the RSMS or a similar quantitative scale appears highly desirable for future studies.

Crouzon syndrome: posterior fossa volume studies in vestibular orientation.

INTRODUCTION: With the increasing possibilities of surgical treatment addressing the complex spectrum of defects in Crouzon syndrome (CS), it is of utmost importance to obtain accurate assessment of the malformation. Evaluating the volume of the posterior fossa is of great importance since many authors, considering that its volume is always decreased, favor posterior fossa enlargement as a first step in the treatment of CS. MATERIAL AND METHODS: We studied CT scans of children with CS, which were vestibular-oriented (VO) in order to conform with physiological landmarks, and we measured intracranial volume by manual segmentation; these abnormal CT scans were superposed with VO 3D-CT scanners of age-matched controls. We studied the volume index of the posterior fossa for each CS patient defined as the ratio of its volume in CS patients with the normal for age calculated from normal controls. RESULTS: We studied the imaging of 41 children with CS and 70 control. Among CS patients, the volume of the posterior fossa was increased in 10, compared with control. We found closure of the sphenoidal synchondrosis was correlated with age and with the width of the posterior fossa, but not with its length nor with the posterior fossa volume index. CONCLUSION: Segmentation on VO-CT scanner and superposition with CT scanners of normal controls is a powerful tool for the study of the impact of CS or other synostoses on volume and shape. We found that CS is more heterogeneous than previously thought, and surgical strategies should be adapted accordingly.

Linear craniectomy for early posterior decompression in craniosynostoses: technique and results.

INTRODUCTION: Early decompressive posterior linear craniectomy (PLC) can be indicated in very young infants with complex multisuture synostosis, which often involve the lambdoid suture (LS). The literature data on the surgical technique and its results are scarce. MATERIAL AND METHODS: Based on our experience with PLC during the last 10 years, we detail our surgical technique for PLC, the possible pitfalls, and complication avoidance. RESULTS: We review seven observations, 5 girls and 2 boys, 6 of these with identified mutations, operated for PLC at a mean age of 3.19 months (6 days to 6.1 months). One patient died of unexplained cardiac arrest on postoperative day two, the others had a favorable outcome with good development and no visual loss. Three of these required additional cranioplasty at a later age, one of these with craniofacial distraction. DISCUSSION: PLC can be a salvage operation in very young patients with complex synostosis involving the LS, and with proper preparation and careful technique, allows favorable outcome. The approach must be versatile in order to anticipate further surgeries in these complex, most often syndromic cases.

Effects of Two Melt Extrusion Based Additive Manufacturing Technologies and Common Sterilization Methods on the Properties of a Medical Grade PLGA Copolymer.

Although bioabsorbable polymers have garnered increasing attention because of their potential in tissue engineering applications, to our knowledge there are only a few bioabsorbable 3D printed medical devices on the market thus far. In this study, we assessed the processability of medical grade Poly(lactic-co-glycolic) Acid (PLGA)85:15 via two additive manufacturing technologies: Fused Filament Fabrication (FFF) and Direct Pellet Printing (DPP) to highlight the least destructive technology towards PLGA. To quantify PLGA degradation, its molecular weight (gel permeation chromatography (GPC)) as well as its thermal properties (differential scanning calorimetry (DSC)) were evaluated at each processing step, including sterilization with conventional methods (ethylene oxide, gamma, and beta irradiation). Results show that 3D printing of PLGA on a DPP printer significantly decreased the number-average molecular weight (Mn) to the greatest extent (26% Mn loss, p < 0.0001) as it applies a longer residence time and higher shear stress compared to classic FFF (19% Mn loss, p < 0.0001). Among all sterilization methods tested, ethylene oxide seems to be the most appropriate, as it leads to no significant changes in PLGA properties. After sterilization, all samples were considered to be non-toxic, as cell viability was above 70% compared to the control, indicating that this manufacturing route could be used for the development of bioabsorbable medical devices. Based on our observations, we recommend using FFF printing and ethylene oxide sterilization to produce PLGA medical devices.

Synostosis of the lambdoid suture: a spectrum.

PURPOSE: Lambdoid synostosis (LS) is a rare condition, which is either isolated; associated with sagittal synostosis, the "Mercedes-Benz" syndrome (MBS); or with synostosis of the coronal sutures (oxycephalic form). In addition, LS is part of the phenotype of a growing number of genetic diseases. The nosology, pathophysiology, and management are controversial. We decided to review our experience with LS. METHODS: We reviewed retrospectively pediatric cases of LS proved on CT-scanner, isolated or associated with other conditions, followed in our craniofacial center during the last 15 years, regarding clinical presentation, anatomical lesions, syndromic associations, surgical management, and outcome. RESULTS: We reviewed 48 cases: 6 isolated LS, 22 MBS, and 20 oxycephalic. A syndromic context was present in 72% (up to 80% of oxycephalic cases), and faciostenosis was present in 23%, mostly oxycephalic cases (40%). Transverse sinus agenesis was found in 61% of documented patients. A total of 31% of children had a dystocic birth, up to 45% of MBS. Decompressive craniectomy or cranioplasty was needed in a majority of patients, often young infants, while posterior fossa decompression was mostly performed in older children. CONCLUSION: LS is rarely isolated and non syndromic; most cases are found in a wide spectrum of diseases, and LS is often associated with sagittal or coronal synostosis. Genetic evaluation is mandatory for LS; conversely, geneticists may require neurosurgical advice for LS in an increasing number of very rare diseases. The surgical management of LS should be tailored according to clinical presentation, age, and syndromic context.

How to improve donor skin availability: Pragmatic procedures to minimize the discard rate of cryopreserved allografts in skin banking.

BACKGROUND: Microbial contamination of human skin allografts is a frequent cause of allograft discard. Our purpose was to evaluate the discard rate of skin bank contaminated allografts and specific procedures used to reduce allograft contamination without affecting safety. METHODS: We conducted at the Lille Tissue Bank a retrospective study of all deceased donors (n = 104) harvested from January 2018 to December 2018. Skin procurement was split into 3 zones: the back of the body and the two legs that were processed separately. It represented 433 cryopreserved skin allograft pouches of approximatively 500 cm² each. Donors were almost equally split between brain-dead (53%, 55/104) and cadaveric (47%, 49/104) donors. RESULTS: Out of all donors, 42 (40.5%) had at least one sampling zone with a positive microbiological test resulting in 106 (24%) contaminated skin pouches. The contamination rate did not vary according to the harvested zone or type of donor. Traumatic deaths showed significantly less contamination rates than other death types (p < 0.05). Contamination rate decreased with time spent in the antibiotic solution. The risk of having contaminated allografts was five-fold higher when the skin spent less than 96 h in the antibiotic cocktail (p < 0.05). According to our validation protocol, most donors (32/42, 76%) had skin allografts contaminated with bacteria (mainly Staphylococcus spp) compatible with clinical use. No recipient infection was recorded as a result of skin graft contaminated with saprophytic or non-pathogenic germs. By harvesting 3 separate zones per donor, the total surface area for clinical use increased by 53% for contaminated donors. Overall, the proportion of contamination-related discarded allografts was 3.2% (14/433 of pouches). CONCLUSION: Few simple pragmatic measures (including skin incubation in the antibiotic bath for at least 96 h at 4 °C, splitting the skin harvesting areas to minimize the risk of cross-infection and clinical use of allografts contaminated with saprophytic and non-pathogenic germs) can reduce the discard rate of contaminated allografts without affecting clinical safety.

Rationale for the design of 3D-printable bioresorbable tissue-engineering chambers to promote the growth of adipose tissue.

Tissue engineering chambers (TECs) bring great hope in regenerative medicine as they allow the growth of adipose tissue for soft tissue reconstruction. To date, a wide range of TEC prototypes are available with different conceptions and volumes. Here, we addressed the influence of TEC design on fat flap growth in vivo as well as the possibility of using bioresorbable polymers for optimum TEC conception. In rats, adipose tissue growth is quicker under perforated TEC printed in polylactic acid than non-perforated ones (growth difference 3 to 5 times greater within 90 days). Histological analysis reveals the presence of viable adipocytes under a moderate (less than 15% of the flap volume) fibrous capsule infiltrated with CD68+ inflammatory cells. CD31-positive vascular cells are more abundant at the peripheral zone than in the central part of the fat flap. Cells in the TEC exhibit a specific metabolic profile of functional adipocytes identified by 1H-NMR. Regardless of the percentage of TEC porosity, the presence of a flat base allowed the growth of a larger fat volume (p < 0.05) as evidenced by MRI images. In pigs, bioresorbable TEC in poly[1,4-dioxane-2,5-dione] (polyglycolic acid) PURASORB PGS allows fat flap growth up to 75 000 mm3 at day 90, (corresponding to more than a 140% volume increase) while at the same time the TEC is largely resorbed. No systemic inflammatory response was observed. Histologically, the expansion of adipose tissue resulted mainly from an increase in the number of adipocytes rather than cell hypertrophy. Adipose tissue is surrounded by perfused blood vessels and encased in a thin fibrous connective tissue containing patches of CD163+ inflammatory cells. Our large preclinical evaluation defined the appropriate design for 3D-printable bioresorbable TECs and thus opens perspectives for further clinical applications.

ALGINATE versus NPWT in the Preparation of Surgical Excisions for an STSG: ATEC Trial.

A calcium alginate dressing (ALGINATE) and negative pressure wound therapy (NPWT) are frequently used to treat wounds which heal by secondary intention. This trial compared the healing efficacy and safety of these 2 treatments. METHODS: This randomized, non-inferiority trial enrolled patients who underwent skin excision (>30 cm2), which was left open to heal by secondary intention. They received ALGINATE or NPWT by a centralized randomization. Follow-up was performed weekly until optimal granulation tissue was obtained. The primary outcome was time to obtain optimal granulation tissue for a split thickness skin graft take (non-inferiority margin: 4 days). Secondary outcomes were occurrence of adverse events (AEs) and impact of the treatments on the patient's daily life. RESULTS: ALGINATE and NPWT were applied to 47 and 48 patients, respectively. The mean time to optimal granulation was 19.98 days (95% CI, 17.7-22.3) with ALGINATE and 20.54 (95% CI, 17.6-23.5) with NPWT. Between group difference was -0.56 days (95% CI -4.22 to 3.10). The non-inferiority of ALGINATE versus NPWT was demonstrated. No AE related to the treatment occurred with ALGINATE versus 14 AEs with NPWT. There was no difference in the impact of the treatments on the patient's daily life. CONCLUSION: This trial demonstrates that ALGINATE has a similar healing efficacy to that of NPWT and that is markedly better with regard to patient safety.

Sequelae of Facial Palsy: A Comprehensive Treatment.

LEARNING OBJECTIVES: After studying this article, the participant should be able to: 1. Identify the different types of facial paralysis sequelae and define the several medical and surgical techniques commonly available today. 2. Develop a surgical plan to restore symmetry of the face at rest and in dynamic expressions and manage the patient during smile rehabilitation after dynamic smile reanimation with regional or free muscle transfer. 3. Understand the different types of facial paralysis sequelae and know the several medical and surgical techniques commonly available today. 4. Establish a comprehensive treatment plan to restore symmetry of the face at rest and in dynamic expressions and support the patient during smile rehabilitation after dynamic smile reanimation with regional or free muscle transfer. SUMMARY: Sequelae of facial palsy have a negative impact on the cosmetic aspect and functions of the face. They bear severe consequences for patients with regard to their body image and social relationships. There are numerous medical and surgical treatments that should be proposed to patients to achieve comprehensive facial symmetry. The key to an adapted therapeutic choice, to achieve the best outcomes for patients, is to perform a comprehensive evaluation of the paralyzed face and have broad knowledge of the several techniques described over time in the literature. The patient should be informed of the different therapeutic alternatives, their implications, and their limits. With this article, readers will be able to accurately diagnose the different types of facial paralysis sequelae to develop a surgical plan adapted to each case to restore symmetry at rest and in motion.

Benefits of cryopreserved human amniotic membranes in association with conventional treatments in the management of full-thickness burns.

The use of split-thickness skin autografts (STSA) with dermal substitutes is the gold standard treatment for third-degree burn patients. In this article, we tested whether cryopreserved amniotic membranes could be beneficial to the current treatments for full-thickness burns. Swines were subjected to standardised full-thickness burn injuries, and then were randomly assigned to treatments: (a) STSA alone; (b) STSA associated with the dermal substitute, Matriderm; (c) STSA plus human amniotic membrane (HAM); and (d) STSA associated with Matriderm plus HAM. Clinical and histological assessments were performed over time. We also reported the clinical use of HAM in one patient. The addition of HAM to classic treatments reduced scar contraction. In the presence of HAM, skin wound healing displayed high elasticity and histological examination showed a dense network of long elastic fibres. The presence of HAM increased dermal neovascularization, but no effect was observed on the recruitment of inflammatory cells to the wound. Moreover, the use of HAM with classical treatments in one human patient revealed a clear benefit in terms of elasticity. These results give initial evidence to consider the clinical application of HAM to avoid post-burn contractures and therefore facilitate functional recovery after deep burn injury.

Three-dimensional study of 31 cases of synostotic anterior plagiocephaly before and after surgical management the Lille protocol.

Synostotic anterior plagiocephaly is a rare pathological cranial malformation. Therapeutic options are rarely studied due to the rarity of the malformation and difficulties in diagnosis and care management. The objective of this study was to analyze the results obtained with the Lille protocol based on 62 CT-scans done before and after surgery in 31 patients. A specific analysis was designed for this work. Nine cephalometric measures enabled to evidence on each CT-Scan the corrections made on the fronto-orbital bandeau and the potential impact of surgery on the craniofacial structures. Results show that surgical symmetry of the fronto-orbital bandeau in the transversal plane, according to the symmetrical axis of the semicircular canals, allows a normalization of the skull's growth and morphogenesis for the surgically affected structures but also adjacent ones.