Your browser doesn't support javascript.
loading
Mostrar: 20 | 50 | 100
Resultados 1 - 5 de 5
Filtrar
Mais filtros

Base de dados
Ano de publicação
Tipo de documento
Intervalo de ano de publicação
1.
Chem Sci ; 15(21): 8145-8155, 2024 May 29.
Artigo em Inglês | MEDLINE | ID: mdl-38817584

RESUMO

Electrocatalytic refinery from biomass-derived glycerol (GLY) to formic acid (FA), one of the most promising candidates for green H2 carriers, has driven widespread attention for its sustainability. Herein, we fabricated a series of monolithic Ni hydroxide-based electrocatalysts by a facile and in situ electrochemical method through the manipulation of local pH near the electrode. The as-synthesized Ni(OH)2@NF-1.0 affords a low working potential of 1.36 VRHE to achieve 100% GLY conversion, 98.5% FA yield, 96.1% faradaic efficiency and ∼0.13 A cm-2 of current density. Its high efficiency on a wide range of polyol substrates further underscores the promise of sustainable electro-refinery. Through a combinatory analysis via H2 temperature-programmed reduction, cyclic voltammetry and in situ Raman spectroscopy, the precise regulation of synthetic potential was discovered to be highly essential to controlling the content, phase composition and redox properties of Ni hydroxides, which significantly determine the catalytic performance. Additionally, the 'adsorption-activation' mode of ortho-di-hydroxyl groups during the C-C bond cleavage of polyols was proposed based on a series of probe reactions. This work illuminates an advanced path for designing non-noble-metal-based catalysts to facilitate electrochemical biomass valorization.

2.
iScience ; 27(6): 109824, 2024 Jun 21.
Artigo em Inglês | MEDLINE | ID: mdl-38779484

RESUMO

Hydrodesulfurization (HDS) is a commonly used route for producing clean fuels in modern refinery. Herein, ammonium/amine-intercalated MoS2 catalysts with various content of 1T phase and S vacancies have been successfully synthesized. Along with the increment of 1T phase and S vacancies of MoS2, the initial reaction rate of the HDS of dibenzothiophene (DBT) can be improved from 0.09 to 0.55 µmol·gcat-1·s-1, accounting for a remarkable activity compared to the-state-of-the-art catalysts. In a combinatory study via the activity evaluation and catalysts characterization, we found that the intercalation species of MoS2 played a key role in generating more 1T phase and S vacancies through the 'intercalation-deintercalation' processes, and the hydrogenation and desulfurization of HDS can be significantly promoted by 1T phase and S vacancies on MoS2, respectively. This study provides a practically meaningful guidance for developing more advanced HDS catalysts by the intercalated MoS2-derived materials with an in-depth understanding of structure-function relationships.

3.
ACS Appl Mater Interfaces ; 16(7): 8697-8706, 2024 Feb 21.
Artigo em Inglês | MEDLINE | ID: mdl-38330188

RESUMO

Electrosynthesis of 2,5-furandicarboxylic acid (FDCA) from the biomass-derived 5-hydroxymethylfurfural (HMF) is one of the most potential means to produce a bioplastic monomer. Copper oxide (CuO) catalyst shows promising prospects due to its high surface activity, conductivity, and stability, but relatively poor capability of oxygen evolution; however, the weak adsorption of substrates and the lack of facile synthetic strategies largely restrict its practical application. Here, a novel facile in situ method, alternate cycle voltammetry (denoted as c) and potentiostatic electrolysis (denoted as p), was proposed to prepare a monolithic cpc-CuO/Cu-foam electrocatalyst. Along with the increment of CuO and its surficial oxygen vacancies (OV), the FDCA yield, productivity, and Faradaic efficiency can reach up to ∼98.5%, ∼0.2 mmol/cm2, and ∼94.5% under low potential of 1.404 VRHE. Such an efficient electrosynthesis system can be easily scaled up to afford pure FDCA powders. In a combinatory analysis via electron paramagnetic resonance spectroscopy, H2 temperature-programmed reduction, open circuit potential, infrared spectroscopy, zeta potential, electrochemical measurement, and theoretical calculation, we found that the CuO was the active phase and OV generated on CuO surface can dramatically enhance the adsorption of *HMF and *OH (* denotes an active site), accounting for its superior FDCA production. This work offers an excellent paradigm for enhancing biomass valorization on CuO catalysts by constructing surficial defects.

4.
J Am Chem Soc ; 146(2): 1282-1293, 2024 Jan 17.
Artigo em Inglês | MEDLINE | ID: mdl-38031925

RESUMO

Dicarboxylic acids and cyclic ketones, such as adipic acid (AA) and cyclohexanone (CHN), are essential compounds for the chemical industry. Although their production by electrosynthesis using electricity is considered one of the most promising strategies, the application of such processes has been hampered by a lack of efficient catalysts as well as a lack of understanding of the mechanism. Herein, a series of monolithic msig/ea-NiOOH-Ni(OH)2/NF were prepared by means of self-dissolution of metal matrix components, interface growth, and electrochemical activation (denoted as msig/ea). The as-synthesized catalysts have three-dimensional cuboid-like structures formed by interconnecting nanosheets composed of NiOOH. By theoretically guided regulation of the amounts of Ni3+ and oxygen vacancies (OV), a 96.5% yield of CHN from cyclohexanol (CHA) dehydrogenation and a 93.6% yield of AA from CHN oxidation were achieved. A combined experimental and theoretical study demonstrates that CHA dehydrogenation and CHN oxidation were promoted by the formation of Ni3+ and the peroxide species (*OOH) on OV. This work provides a promising approach for directional electrosynthesis of high-purity chemicals with in-depth mechanistic insights.

5.
Artigo em Inglês | MEDLINE | ID: mdl-38044574

RESUMO

It is highly desired to directly use commercial nickel foam (CNF) as an electrocatalyst for the oxygen evolution reaction (OER) via simple surface reconstruction. In our research, a simple three-step preactivation process was proposed to reconstruct CNF as an efficient OER catalyst, including calcination, high-voltage treatment, and immersing in electrolyte. The optimal CNF after three-step activation reaches an excellent OER performance of 228 and 267 mV at η10 and η100 in alkaline media and can tolerate long-term tests under a large current density of 500 mA·cm-2. The promotion of each step was explored. The calcination step leads to a reconstructive surficial morphology with an enlarged active surface, providing a prerequisite for the following construction steps. The high-voltage treatment changes the valence of surface Ni species, generating phases with higher catalytic activity, and the immersing process introduces Fe heteroatoms into the surface of CNF, boosting the catalytic performance of CNF through Ni-Fe interactions. This research provides a simple method of making high-performance catalysts with accessible nickel foam, a potential for large-scale application in practical industry, and new thinking for the manipulation of Ni-based catalysts.

SELEÇÃO DE REFERÊNCIAS
DETALHE DA PESQUISA