Assessment of Crosslinkers between Peptide Antigen and Carrier Protein for Fusion Peptide-Directed Vaccines against HIV-1.

Conjugate-vaccine immunogens require three components: a carrier protein, an antigen, and a crosslinker, capable of coupling antigen to carrier protein, while preserving both T-cell responses from carrier protein and B-cell responses from antigen. We previously showed that the N-terminal eight residues of the HIV-1 fusion peptide (FP8) as an antigen could prime for broad cross-clade neutralizing responses, that recombinant heavy chain of tetanus toxin (rTTHC) as a carrier protein provided optimal responses, and that choice of crosslinker could impact both antigenicity and immunogenicity. Here, we delve more deeply into the impact of varying the linker between FP8 and rTTHC. In specific, we assessed the physical properties, the antigenicity, and the immunogenicity of conjugates for crosslinkers ranging in spacer-arm length from 1.5 to 95.2 Å, with varying hydrophobicity and crosslinking-functional groups. Conjugates coupled with different degrees of multimerization and peptide-to-rTTHC stoichiometry, but all were well recognized by HIV-fusion-peptide-directed antibodies VRC34.01, VRC34.05, PGT151, and ACS202 except for the conjugate with the longest linker (24-PEGylated SMCC; SM(PEG)24), which had lower affinity for ACS202, as did the conjugate with the shortest linker (succinimidyl iodoacetate; SIA), which also had the lowest peptide-to-rTTHC stoichiometry. Murine immunizations testing seven FP8-rTTHC conjugates elicited fusion-peptide-directed antibody responses, with SIA- and SM(PEG)24-linked conjugates eliciting lower responses than the other five conjugates. After boosting with prefusion-closed envelope trimers from strains BG505 clade A and consensus clade C, trimer-directed antibody-binding responses were lower for the SIA-linked conjugate; elicited neutralizing responses were similar, however, though statistically lower for the SM(PEG)24-linked conjugate, when tested against a strain especially sensitive to fusion-peptide-directed responses. Overall, correlation analyses revealed the immunogenicity of FP8-rTTHC conjugates to be negatively impacted by hydrophilicity and extremes of length or low peptide-carrier stoichiometry, but robust to other linker parameters, with several commonly used crosslinkers yielding statistically indistinguishable serological results.

Advances in purification of SARS-CoV-2 spike ectodomain protein using high-throughput screening and non-affinity methods.

The spike (S) glycoprotein of the pandemic virus, SARS-CoV-2, is a critically important target of vaccine design and therapeutic development. A high-yield, scalable, cGMP-compliant downstream process for the stabilized, soluble, native-like S protein ectodomain is necessary to meet the extensive material requirements for ongoing research and development. As of June 2021, S proteins have exclusively been purified using difficult-to-scale, low-yield methodologies such as affinity and size-exclusion chromatography. Herein we present the first known non-affinity purification method for two S constructs, S_dF_2P and HexaPro, expressed in the mammalian cell line, CHO-DG44. A high-throughput resin screen on the Tecan Freedom EVO200 automated bioprocess workstation led to identification of ion exchange resins as viable purification steps. The chromatographic unit operations along with industry-standard methodologies for viral clearances, low pH treatment and 20 nm filtration, were assessed for feasibility. The developed process was applied to purify HexaPro from a CHO-DG44 stable pool harvest and yielded the highest yet reported amount of pure S protein. Our results demonstrate that commercially available chromatography resins are suitable for cGMP manufacturing of SARS-CoV-2 Spike protein constructs. We anticipate our results will provide a blueprint for worldwide biopharmaceutical production laboratories, as well as a starting point for process intensification.

Advances in Purification of SARS-CoV-2 Spike Ectodomain Protein Using High-Throughput Screening and Non-Affinity Methods.

The spike (S) glycoprotein of the pandemic virus, SARS-CoV-2, is a critically important target of vaccine design and therapeutic development. A high-yield, scalable, cGMP-compliant downstream process for the stabilized, soluble, native-like S protein ectodomain is necessary to meet the extensive material requirements for ongoing research and development. As of June 2021, S proteins have exclusively been purified using difficult-to-scale, low-yield methodologies such as affinity and size-exclusion chromatography. Herein we present the first known non-affinity purification method for two S constructs, S_dF_2P and HexaPro, expressed in the mammalian cell line, CHO-DG44. A high-throughput resin screen on the Tecan Freedom EVO200 automated bioprocess workstation led to identification of ion exchange resins as viable purification steps. The chromatographic unit operations along with industry-standard methodologies for viral clearances, low pH treatment and 20 nm filtration, were assessed for feasibility. The developed process was applied to purify HexaPro from a CHO-DG44 stable pool harvest and yielded the highest yet reported amount of pure S protein. Our results demonstrate that commercially available chromatography resins are suitable for cGMP manufacturing of SARS-CoV-2 Spike protein constructs. We anticipate our results will provide a blueprint for worldwide biopharmaceutical production laboratories, as well as a starting point for process intensification.

High throughput chromatography and analytics can inform viral clearance capabilities during downstream process development for biologics.

High throughput process development (HTPD) using liquid handling robotics and RoboColumns is an established methodology in downstream process development to screen chromatography resins and optimize process designs to meet target product profiles. However, HTPD is not yet widely available for use in viral clearance capability of the resin due to a variety of constraints. In the present study, a BSL-1-compatible, non-infectious MVM model, MVM-VLP, was tested for viral clearance assessment with various resin and membrane chromatography operations in a HTPD mode. To detect the MVM-VLP in the high throughput experiments, an electrochemiluminescence immunoassay (ECLIA) assay was developed with up to 5 logs of dynamic range. Storage time suitability of MVM-VLP solutions in various buffer matrices, in the presence or absence of a glycoprotein vaccine candidate, were assessed. Then, MVM-VLP and a test article monoclonal antibody (mAb) were used in a HTPD design that included commercially available ion exchange media chemistries, elucidating a wide variety of viral clearance ability at different operating conditions. The methodologies described herein have the potential to be a part of the process design stage in biologics manufacturing process development, which in turn can reduce risk associated with viral clearance validation studies.

A non-affinity purification process for GMP production of prefusion-closed HIV-1 envelope trimers from clades A and C for clinical evaluation.

Metastable glycosylated immunogens present challenges for GMP manufacturing. The HIV-1 envelope (Env) glycoprotein trimer is covered by N-linked glycan comprising half its mass and requires both trimer assembly and subunit cleavage to fold into a prefusion-closed conformation. This conformation, the vaccine-desired antigenic state, is both metastable to structural rearrangement and labile to subunit dissociation. Prior reported GMP manufacturing for a soluble trimer stabilized in a near-native state by disulfide (SOS) and Ile-to-Pro (IP) mutations has employed affinity methods based on antibody 2G12, which recognizes only ~30% of circulating HIV strains. Here, we develop a scalable manufacturing process based on commercially available, non-affinity resins, and we apply the process to current GMP (cGMP) production of trimers from clades A and C, which have been found to boost cross-clade neutralizing responses in vaccine-test species. The clade A trimer, which we named "BG505 DS-SOSIP.664", contained an engineered disulfide (201C-433C; DS) within gp120, which further stabilized this trimer in a prefusion-closed conformation resistant to CD4-induced triggering. BG505 DS-SOSIP.664 was expressed in a CHO-DG44 stable cell line and purified with initial and final tangential flow filtration steps, three commercially available resin-based chromatography steps, and two orthogonal viral clearance steps. The non-affinity purification enabled efficient scale-up, with a 250 L-scale cGMP run yielding 9.6 g of purified BG505 DS-SOSIP.664. Antigenic analysis indicated retention of a prefusion-closed conformation, including recognition by apex-directed and fusion peptide-directed antibodies. The developed manufacturing process was suitable for 50 L-scale production of a second prefusion-stabilized Env trimer vaccine candidate, ConC-FP8v2 RnS-3mut-2G-SOSIP.664, yielding 7.8 g of this consensus clade C trimer. The successful process development and purification scale-up of HIV-1 Env trimers from different clades by using commercially available materials provide experimental demonstration for cGMP manufacturing of trimeric HIV-Env vaccine immunogens, in an antigenically desired conformation, without the use of costly affinity resins.

A unique algorithm for the determination of peptide-carrier protein conjugation ratio by amino acid analysis using intrinsic internal standard.

An N-terminal peptide of the HIV-1 fusion peptide (FP) with eight amino acid residues (FP8) was conjugated to a recombinant Tetanus Toxoid Heavy Chain Fragment C (rTTHc) as a carrier protein to help boosting immunogenicity against HIV-1. In this rapid communication, a unique algorithm to determine FP-rTTHc conjugation ratio was developed based off the amino acid analysis. Five well recovered amino acids (present in both FP and rTTHc) were used to calculate the conjugation ratio, while proline (present only in rTTHc) was identified and utilized as the intrinsic internal standard for normalization. With this calculation, the assay variability was minimized (<20%), especially for conjugates with moderate to low conjugation ratios as being compared to previously reported methods. The approach offers a reliable tool to determine the efficiency of the conjugation reactions for in-process monitoring and for final conjugate product characterization.

Quantification of residual hydrophobic fusion peptide with monomer and dimer forms using reversed-phase liquid chromatography.

A fusion peptide mimicking a part of the sequence of HIV-1 envelope glycoprotein with an additional cysteine at its C-terminus (FP8: AVGIGAVFC) was conjugated to a carrier protein through a linker for development of an HIV-1 vaccine. Since this fusion peptide is very hydrophobic with poor solubility and can self-dimerize via a disulfide bond, co-existence of monomeric and dimeric forms presented a major challenge for residual unconjugated FP8 quantification. A reversed-phase liquid chromatography (RPLC) with UV detection was developed to monitor residual FP8 using an experimental correction factor of 0.85 for UV peak area measurement between FP8 dimer and monomer. Therefore, both forms of unconjugated residual FP8 can be measured based on a single FP8 monomer reference curve. Overall, this study demonstrated that the current purification process can remove free residual FP8 to a low level, <20 µg/mL, which showed negligible impact (<10%) for the conjugated FP8 ratio measurement using another method, amino acid analysis.

Preclinical Development of a Fusion Peptide Conjugate as an HIV Vaccine Immunogen.

The vaccine elicitation of broadly neutralizing antibodies against HIV-1 is a long-sought goal. We previously reported the amino-terminal eight residues of the HIV-1-fusion peptide (FP8) - when conjugated to the carrier protein, keyhole limpet hemocyanin (KLH) - to be capable of inducing broadly neutralizing responses against HIV-1 in animal models. However, KLH is a multi-subunit particle derived from a natural source, and its manufacture as a clinical product remains a challenge. Here we report the preclinical development of recombinant tetanus toxoid heavy chain fragment (rTTHC) linked to FP8 (FP8-rTTHC) as a suitable FP-conjugate vaccine immunogen. We assessed 16 conjugates, made by coupling the 4 most prevalent FP8 sequences with 4 carrier proteins: the aforementioned KLH and rTTHC; the H. influenzae protein D (HiD); and the cross-reactive material from diphtheria toxin (CRM197). While each of the 16 FP8-carrier conjugates could elicit HIV-1-neutralizing responses, rTTHC conjugates induced higher FP-directed responses overall. A Sulfo-SIAB linker yielded superior results over an SM(PEG)2 linker but combinations of carriers, conjugation ratio of peptide to carrier, or choice of adjuvant (Adjuplex or Alum) did not significantly impact elicited FP-directed neutralizing responses in mice. Overall, SIAB-linked FP8-rTTHC appears to be a promising vaccine candidate for advancing to clinical assessment.

Activation of mannan-binding lectin-associated serine proteases leads to generation of a fibrin clot.

The lectin pathway of complement is activated upon binding of mannan-binding lectin (MBL) or ficolins (FCNs) to their targets. Upon recognition of targets, the MBL-and FCN-associated serine proteases (MASPs) are activated, allowing them to generate the C3 convertase C4b2a. Recent findings indicate that the MASPs also activate components of the coagulation system. We have previously shown that MASP-1 has thrombin-like activity whereby it cleaves and activates fibrinogen and factor XIII. MASP-2 has factor Xa-like activity and activates prothrombin through cleavage to form thrombin. We now report that purified L-FCN-MASPs complexes, bound from serum to N-acetylcysteine-Sepharose, or MBL-MASPs complexes, bound to mannan-agarose, generate clots when incubated with calcified plasma or purified fibrinogen and factor XIII. Plasmin digestion of the clot and analysis using anti-D-dimer antibodies revealed that the clot was made up of fibrin and was similar to that generated by thrombin in normal human plasma. Fibrinopeptides A and B (FPA and FPB, respectively) were released after fibrinogen cleavage by L-FCN-MASPs complexes captured on N-acetylcysteine-Sepharose. Studies of inhibition of fibrinopeptide release indicated that the dominant pathway for clotting catalysed by the MASPs is via MASP-2 and prothrombin activation, as hirudin, a thrombin inhibitor that does not inhibit MASP-1 and MASP-2, substantially inhibits fibrinopeptide release. In the light of their potent chemoattractant effects on neutrophil and fibroblast recruitment, the MASP-mediated release of FPA and FPB may play a role in early immune activation. Additionally, MASP-catalysed deposition and polymerization of fibrin on the surface of micro-organisms may be protective by limiting the dissemination of infection.

Functional estimation of mannose binding lectin associated serine protease (MBL-MASPs) in human serum.

BACKGROUND & OBJECTIVE: Mannose binding lectin (MBL), a C-type or Ca(2+) dependent lectin, plays a major role in lectin pathway of complement activation. MBL deficiency/insufficiency is associated with susceptibility to many infections. It is important to know the association of functional lectin levels with disease condition. Therefore, we carried out this study to develop a simple assay to estimate the functional MBL-associated serine proteases (MBL-MASPs) levels in human serum samples. METHODS: A novel method was developed based on direct haemolysis of mannan coated human erythrocytes in autologous human serum for functional estimation of MBL and associated serine proteases (MBLMASPs complex). Functional MBL-MASPs serum levels in 75 healthy individuals was estimated. Results were compared with those obtained by ELISA based assay. RESULTS: Lysis of mannan coated human RBC in autologous serum was highly specific and mediated by MBL-MASPs lectin complement pathway. Concentration of MBL-MASPs in serum of normal healthy individuals (n=75) was found to be 1.579 mug/ml (median= 1.149 mug/ml) by the haemolytic assay which was comparable to the values obtained by ELISA method. INTERPRETATION & CONCLUSION: Our findings showed that the method developed for the estimation of functional MBL-MASPs levels in human serum is simple, cost-effective and comparable with existing ELISA method.

The action of MBL-associated serine protease 1 (MASP1) on factor XIII and fibrinogen.

The complement system is an important recognition and effector mechanism of the innate immune system that upon activation leads to the elimination of foreign bodies. It can be activated through three pathways of which the lectin pathway is one. The lectin pathway relies on the binding of mannan-binding lectin (MBL) or the ficolins and the subsequent activation of the MBL-associated serine proteases (MASPs), namely, MASP1, 2 and 3 which all form complexes with both MBL and the ficolins. Major substrates have only been identified for MASP2 i.e. C4 and C2. For MASP1 only a few protein substrates which are cleaved at a low rate have been identified while none are known for MASP3. Since chromogenic substrate screenings have shown that MASP1 has thrombin-like activity, we wanted to investigate the catalytic potential of MASP1 towards two major proteins involved in the clotting process, fibrinogen and factor XIII, and compare the activity directly with that of thrombin. We found that rMASP1 and thrombin cleave factor XIII A-chain and the fibrinogen beta-chain at identical sites, but differ in cleavage of the fibrinogen alpha-chain. The thrombin turnover rate of factor XIII is approximately 650 times faster than that of rMASP1 at 37 degrees C, pH 7.4. rMASP1 cleavage of fibrinogen leads to the release of the proinflammatory peptide fibrinopeptide B. Thus rMASP1 has similar, but not identical specificity to thrombin and its catalytic activity for factor XIII and fibrinogen cleavage is much lower than that of thrombin. Nevertheless, rMASP1 can drive the formation of cross-linked fibrinogen. Since MASP1 is activated on contact of MBL or the ficolins with microorganisms, fibrinogen and factor XIII may be involved in the elimination of invading pathogens.

Carbohydrate-induced modulation of cell membrane. VIII. Agglutination with mammalian lectin galectin-1 increases osmofragility and membrane fluidity of trypsinized erythrocytes.

Interaction of lectins with cell surface determinants may alter membrane properties. Using trypsinized rabbit erythrocytes as model we tested the capacity of an endogenous lectin in this respect. Galectin-1 is a member of an adhesion/growth-regulatory family known to interact for example with ganglioside GM(1) and also the hydrophobic tail of oncogenic H-Ras. Assays on membrane fluidity and osmofragility detect galectin-1's capacity to increase the parameters. Moreover, it increases susceptibility of erythrocytes to radical damage. These observations indicate the potential of this endogenous lectin to affect membrane properties beyond the immediate interaction with cell surface epitopes.