Impact of the Methylene Bridge Substitution in Chelating NHC-Phosphine Mn(I) Catalyst for Ketone Hydrogenation.

Systematic modification of the chelating NHC-phosphine ligand (NHC = N-heterocyclic carbene) in highly efficient ketone hydrogenation Mn(I) catalyst fac-[(Ph2PCH2NHC)Mn(CO)3Br] has been performed and the catalytic activity of the resulting complexes was evaluated using acetophenone as a benchmark substrate. While the variation of phosphine and NHC moieties led to inferior results than for a parent system, the incorporation of a phenyl substituent into the ligand methylene bridge improved catalytic performance by ca. 3 times providing maximal TON values in the range of 15000-20000. Mechanistic investigation combining experimental and computational studies allowed to rationalize this beneficial effect as an enhanced stabilization of reaction intermediates including anionic hydride species fac-[(Ph2PC(Ph)NHC)Mn(CO)3H]- playing a crucial role in the hydrogenation process. These results highlight the interest of such carbon bridge substitution strategy being rarely employed in the design of chemically non-innocent ligands.

Two active species from a single metal halide precursor: a case study of highly productive Mn-catalyzed dehydrogenation of amine-boranes via intermolecular bimetallic cooperation.

Metal-metal cooperation for inert bond activation is a ubiquitous concept in coordination chemistry and catalysis. While the great majority of such transformations proceed via intramolecular mode in binuclear complexes, to date only a few examples of intermolecular small molecule activation using usually bimetallic frustrated Lewis pairs (Mδ+⋯M'δ-) have been reported. We introduce herein an alternative approach for the intermolecular bimetallic cooperativity observed in the catalytic dehydrogenation of amine-boranes, in which the concomitant activation of N-H and B-H bonds of the substrate via the synergetic action of Lewis acidic (M+) and basic hydride (M-H) metal species derived from the same mononuclear complex (M-Br). It was also demonstrated that this system generated in situ from the air-stable Mn(i) complex fac-[(CO)3(bis(NHC))MnBr] and NaBPh4 shows high activity for H2 production from several substrates (Me2NHBH3, tBuNH2BH3, MeNH2BH3, NH3BH3) at low catalyst loading (0.1% to 50 ppm), providing outstanding efficiency for Me2NHBH3 (TON up to 18 200) that is largely superior to all known 3d-, s-, p-, f-block metal derivatives and frustrated Lewis pairs (FLPs). These results represent a step forward towards more extensive use of intermolecular bimetallic cooperation concepts in modern homogeneous catalysis.

Phosphine-NHC-Phosphonium Ylide Pincer Ligand: Complexation with Pd(II) and Unconventional P-Coordination of the Ylide Moiety.

An efficient synthesis of two pincer preligands [Ph2PCH(R)ImCH2CH2CH2PPh3]X2 (R = H, X = OTf; R = Ph, X = BF4) was developed. Subsequent reactions with PdCl2 and an excess of Cs2CO3 led to the formation of highly stable cationic ortho-metalated Pd(II) complexes [(P,C,C,C)Pd]X exhibiting phosphine, NHC, phosphonium ylide, and σ-aryl donor extremities. The protonation of one of the latter complexes with R = H affords the Pd(II) complex [(P,C,C)Pd(MeCN)](OTf)2 bearing an unprecedented nonsymmetrical NHC core pincer scaffold with a 5,6-chelating framework. The overall donor properties of this phosphine-NHC-phosphonium ylide ligand were estimated using the experimental νCN stretching frequency in the corresponding [(P,C,C)Pd(CNtBu](OTf)2 derivative and were shown to be competitive with the related bis(NHC)-phosphonium ylide and phenoxy-NHC-phosphonium ylide pincers. The presence of a phenyl substituent in the bridge between phosphine and NHC moieties in the ortho-metalated complex [(P,C,C,C)Pd](BF4) makes possible the deprotonation of this position using LDA to provide a persistent zwitterionic complex [(P,C,C,C)Pd] featuring a rare P-coordinated phosphonium ylide moiety in addition to a conventional C-coordinated one. The comparison of the 31P and 13C NMR data for these C- and P-bound phosphonium ylide fragments within the same molecule was performed for the first time, and the bonding situation in both cases was studied in detail by QTAIM and ELF topological analyses.

The Dichotomy of Mn-H Bond Cleavage and Kinetic Hydricity of Tricarbonyl Manganese Hydride Complexes.

Acid-base characteristics (acidity, pKa, and hydricity, ΔG°H- or kH-) of metal hydride complexes could be a helpful value for forecasting their activity in various catalytic reactions. Polarity of the M-H bond may change radically at the stage of formation of a non-covalent adduct with an acidic/basic partner. This stage is responsible for subsequent hydrogen ion (hydride or proton) transfer. Here, the reaction of tricarbonyl manganese hydrides mer,trans-[L2Mn(CO)3H] (1; L = P(OPh)3, 2; L = PPh3) and fac-[(L-L')Mn(CO)3H] (3, L-L' = Ph2PCH2PPh2 (dppm); 4, L-L' = Ph2PCH2-NHC) with organic bases and Lewis acid (B(C6F5)3) was explored by spectroscopic (IR, NMR) methods to find the conditions for the Mn-H bond repolarization. Complex 1, bearing phosphite ligands, features acidic properties (pKa 21.3) but can serve also as a hydride donor (ΔG≠298K = 19.8 kcal/mol). Complex 3 with pronounced hydride character can be deprotonated with KHMDS at the CH2-bridge position in THF and at the Mn-H position in MeCN. The kinetic hydricity of manganese complexes 1-4 increases in the order mer,trans-[(P(OPh)3)2Mn(CO)3H] (1) < mer,trans-[(PPh3)2Mn(CO)3H] (2) ≈ fac-[(dppm)Mn(CO)3H] (3) < fac-[(Ph2PCH2NHC)Mn(CO)3H] (4), corresponding to the gain of the phosphorus ligand electron-donor properties.

Fac-to-mer isomerization triggers hydride transfer from Mn(I) complex fac-[(dppm)Mn(CO)3H].

Low-temperature IR and NMR studies combined with DFT calculations revealed the mechanistic complexity of apparently simple reactions between Mn(I) complex fac-[(dppm)Mn(CO)3H] and Lewis acids (LA = Ph3C+, B(C6F5)3) involving the formation of so-far elusive meridional hydride species mer-[(dppm)Mn(CO)3H⋯LA] and unusual dearomatization of the Ph3C+ cation upon hydride transfer.

Bifunctional activation of amine-boranes by the W/Pd bimetallic analogs of "frustrated Lewis pairs".

The reaction between basic [(PCP)Pd(H)] (PCP = 2,6-(CH2P(t-C4H9)2)2C6H4) and acidic [LWH(CO)3] (L = Cp (1a), Tp (1b); Cp = η5-cyclopentadienyl, Tp = κ3-hydridotris(pyrazolyl)borate) leads to the formation of bimolecular complexes [LW(CO)2(µ-CO)⋯Pd(PCP)] (4a, 4b), which catalyze amine-borane (Me2NHBH3, t BuNH2BH3) dehydrogenation. The combination of variable-temperature (1H, 31P{1H}, 11B NMR and IR) spectroscopies and computational (ωB97XD/def2-TZVP) studies reveal the formation of an η1-borane complex [(PCP)Pd(Me2NHBH3)]+[LW(CO3)]- (5) in the first step, where a BH bond strongly binds palladium and an amine group is hydrogen-bonded to tungsten. The subsequent intracomplex proton transfer is the rate-determining step, followed by an almost barrierless hydride transfer. Bimetallic species 4 are easily regenerated through hydrogen evolution in the reaction between two hydrides.

Bis[diphenylphosphino]methane and its bridge-substituted analogues as chemically non-innocent ligands for H2 activation.

Deprotonation of fac-[(κ2P,P-Ph2PCH(R)PPh2)Mn(CO)3Br] (R = H, Me, Ph) produces the corresponding diphosphinomethanide derivatives fac-[(κ3P,C,P-Ph2PC(R)PPh2)Mn(CO)3], which are prone to activate H2 to form the hydride complexes fac-[(κ2P,P-Ph2PCH(R)PPh2)Mn(CO)3H]. The substitution of the dppm bridge improves dramatically the reaction efficiency and this was rationalized by DFT calculations.

Unusual Tri-, Hexa-, and Nonanuclear Cu(II) Cage Methylsilsesquioxanes: Synthesis, Structures, and Catalytic Activity in Oxidations with Peroxides.

Three types of unusual cagelike copper(II) methylsilsesquioxanes, namely, nona- [(MeSiO1.5)18(CuO)9] 1, hexa- [(MeSiO1.5)10(HO0.5)2(CuO)6(C12H8N2)2(MeSiO1.5)10(HO0.5)1.33(CH3COO0.5)0.67(CuO)6(C12H8N2)2] 2, [(MeSiO1.5)10(CuO)6(MeO0.5)2(C10H8N2)2] 3, and trinuclear [(MeSiO1.5)8(CuO)3(C10H8N2)2] 4, were obtained in 44%, 27%, 20%, and 16% yields, respectively. Nuclearity and structural fashion of products was controlled by the choice of solvent system and ligand, specifically assisting the assembling of cage. Structures of 1-4 were determined by single-crystal X-ray diffraction analysis. Compounds 1 and 4 are the first cage metallasilsesquioxanes, containing nine and three Cu ions, respectively. Product 1 is the first observation of nonanuclear metallasilsesquioxane ever. Unique architecture of 4 represents early unknown type of molecular geometry, based on two condensed pentamembered siloxane cycles. Topological analysis of metal clusters in products 1-4 is provided. Complex 1 efficiently catalyzes oxidation of alcohols with tert-butylhydroperoxide TBHP to ketones or alkanes with H2O2 to alkyl hydroperoxides in acetonitrile.

Dihydrogen bond intermediated alcoholysis of dimethylamine-borane in nonaqueous media.

Dimethylamine-borane (DMAB) acid/base properties, its dihydrogen-bonded (DHB) complexes and proton transfer reaction in nonaqueous media were investigated both experimentally (IR, UV/vis, NMR, and X-ray) and theoretically (DFT, NBO, QTAIM, and NCI). The effects of DMAB concentration, solvents polarity and temperature on the degree of DMAB self-association are shown and the enthalpy of association is determined experimentally for the first time (-ΔH°assoc = 1.5-2.3 kcal/mol). The first case of "improper" (blue-shifting) NH···F hydrogen bonds was observed in fluorobenzene and perfluorobenzene solutions. It was shown that hydrogen-bonded complexes are the intermediates of proton transfer from alcohols and phenols to DMAB. The reaction mechanism was examined computationally taking into account the coordinating properties of the reaction media. The values of the rate constants of proton transfer from HFIP to DMAB in acetone were determined experimentally [(7.9 ± 0.1) × 10(-4) to (1.6 ± 0.1) × 10(-3) mol(-1)·s(-1)] at 270-310 K. Computed activation barrier of this reaction ΔG(‡theor)298 K(acetone) = 23.8 kcal/mol is in good agreement with the experimental value of the activation free energy ΔG(‡exp)270 K = 21.1 kcal/mol.