Surface Lattice Modulation Enables Stable Cycling of High-Loading All-solid-state Batteries at High Voltages.

Halide solid electrolytes, known for their high ionic conductivity at room temperature and good oxidative stability, face notable challenges in all-solid-state Li-ion batteries (ASSBs), especially with unstable cathode/solid electrolyte (SE) interface and increasing interfacial resistance during cycling. In this work, we have developed an Al3+-doped, cation-disordered epitaxial nanolayer on the LiCoO2 surface by reacting it with an artificially constructed AlPO4 nanoshell; this lithium-deficient layer featuring a rock-salt-like phase effectively suppresses oxidative decomposition of Li3InCl6 electrolyte and stabilizes the cathode/SE interface at 4.5 V. The ASSBs with the halide electrolyte Li3InCl6 and a high-loading LiCoO2 cathode demonstrated high discharge capacity and long cycling life from 3 to 4.5 V. Our findings emphasize the importance of specialized cathode surface modification in preventing SE degradation and achieving stable cycling of halide-based ASSBs at high voltages.

Anion Doping for Layered Oxides with a Solid-Solution Reaction for Potassium-Ion Battery Cathodes.

The development of potassium-ion batteries (PIBs) is challenged by the shortage of stable cathode materials capable of reversibly hosting the large-sized K+ (1.38 Å), which is prone to cause severe structural degradation and complex phase evolution during the potassiation/depotassiation process. Here, we identified that anionic doping of the layered oxides for PIBs is effective to combat their capacity fading at high voltage (>4.0 V). Taking P2-type K2/3Mn7/9Ni1/9Ti1/9O17/9F1/9 (KMNTOF) as an example, we showed that the partial substitution of O2- by F- enlarged the interlayer distance of the K2/3Mn7/9Ni1/9Ti1/9O2 (KMNTO), which becomes more favorable for fast K+ transition without violent structural destruction. Meanwhile, based on the experimental data and theoretical results, we identified that the introduction of F- anions effectively increased the redox-active Mn cationic concentration by lowering the average valence of the Mn element, accordingly providing more reversible capacity derived from the Mn3+/4+ redox couple, rather than oxygen redox. This anionic doping strategy enables the KMNTOF cathode to deliver a high reversible capacity of 132.5 mAh g-1 with 0.53 K+ reversible (de)intercalation in the structure. We expect that the discovery provides new insights into structural engineering for pursuing stable cathodes to facilitate the future applications of high-performance PIBs.

Advancing to 4.6 V Review and Prospect in Developing High-Energy-Density LiCoO2 Cathode for Lithium-Ion Batteries.

Layered LiCoO2 (LCO) is one of the most important cathodes for portable electronic products at present and in the foreseeable future. It becomes a continuous push to increase the cutoff voltage of LCO so that a higher capacity can be achieved, for example, a capacity of 220 mAh g-1 at 4.6 V compared to 175 mAh g-1 at 4.45 V, which is unfortunately accompanied by severe capacity degradation due to the much-aggravated side reactions and irreversible phase transitions. Accordingly, strict control on the LCO becomes essential to combat the inherent instability related to the high voltage challenge for their future applications. This review begins with a discussion on the relationship between the crystal structures and electrochemical properties of LCO as well as the failure mechanisms at 4.6 V. Then, recent advances in control strategies for 4.6 V LCO are summarized with focus on both bulk structure and surface properties. One closes this review by presenting the outlook for future efforts on LCO-based lithium ion batteries (LIBs). It is hoped that this work can draw a clear map on the research status of 4.6 V LCO, and also shed light on the future directions of materials design for high energy LIBs.

Precise surface control of cathode materials for stable lithium-ion batteries.

The increasing demand for high-energy Li-ion batteries (LIBs) continues to push the development of electrode materials, particularly cathode materials, towards their capacity limits. Despite the enormous success, the stability and reliability of LIBs are becoming a serious concern due to the much-aggravated side reactions between electrode materials and organic electrolytes. How to stabilize the cathode/electrolyte interface is therefore an imperative and urgent task drawing considerable attention from both academia and industry. An active treatment on the surface of cathode materials, usually by introducing an inert protection layer, to diminish their side reaction with electrolytes turns out to be a reasonable and effective strategy. This Feature Article firstly outlines our synthesis efforts for the construction of a uniform surface nanocoating on various cathode materials. Different wet chemical routes have been designed to facilitate the control of growth kinetics of targeted coating species so that a precise surface coating could be achieved with nanometer accuracy. Furthermore, we showed the possibility to transform the outer coating layer into a surface doping effect through surface solid reaction at high temperature. A detailed discussion on the structure-performance relationship of these surface-controlled cathode materials is introduced to probe the stabilization mechanism. Finally, perspectives on the development tendency of high-energy cathodes for stable LIBs are provided.

High-Performance Cathode Materials for Potassium-Ion Batteries: Structural Design and Electrochemical Properties.

Due to the obvious advantage in potassium reserves, potassium-ion batteries (PIBs) are now receiving increasing research attention as an alternative energy storage system for lithium-ion batteries (LIBs). Unfortunately, the large size of K+ makes it a challenging task to identify suitable electrode materials, particularly cathode ones that determine the energy density of PIBs, capable of tolerating the serious structural deformation during the continuous intercalation/deintercalation of K+ . It is therefore of paramount importance that proper design principles of cathode materials be followed to ensure stable electrochemical performance if a practical application of PIBs is expected. Herein, the current knowledge on the structural engineering of cathode materials acquired during the battle against its performance degradation is summarized. The K+ storage behavior of different types of cathodes is discussed in detail and the structure-performance relationship of materials sensitive to their different lattice frameworks is highlighted. The key issues facing the future development of different categories of cathode materials are also highlighted and perspectives for potential approaches and strategies to promote the further development of PIBs are provided.

Manipulating Particle Chemistry for Hollow Carbon-based Nanospheres: Synthesis Strategies, Mechanistic Insights, and Electrochemical Applications.

Hollow carbon-based nanospheres (HCNs) have been demonstrated to show promising potential in a large variety of research fields, particularly electrochemical devices for energy conversion/storage. The current synthetic protocols for HCNs largely rely on template-based routes (TBRs), which are conceptually straightforward in creating hollow structures but challenged by the time-consuming operations with a low yield in product as well as serious environmental concerns caused by hazardous etching agents. Meanwhile, they showed inadequate ability to build complex carbon-related architectures. Innovative strategies for HCNs free from extra templates thus are highly desirable and are expected to not only ensure precise control of the key structural parameters of hollow architectures with designated functionalities, but also be environmentally benign and scalable approaches suited for their practical applications.In this Account, we outline our recent research progress on the development of template-free protocols for the creation of HCNs with a focus on the acquired mechanical insight into the hollowing mechanism when no extra templates were involved. We demonstrated that carbon-based particles themselves could act as versatile platforms to create hollow architectures through an effective modulation of their inner chemistry. By means of reaction control, the precursor particles were synthesized into solid ones with a well-designed inhomogeneity inside in the form of different chemical parameters such as molecular weight, crystallization degree, and chemical reactivity, by which we not only can create hollow structures inside particles but also have the ability to tune the key features including compositions, porosity, and dimensional architectures. Accordingly, the functionalities of the prepared HCNs could be systematically altered or optimized for their applications. Importantly, the discussed synthesis approaches are facile and environmentally benign processes with potential for scale-up production.The nanoengineering of HNCs is found to be of special importance for their application in a large variety of electrochemical energy storage and conversion systems where the charge transfer and structural stability become a serious concern. Particular attention in this Account is therefore directed to the potential of HCNs in battery systems such as sodium ion batteries (NIBs) and potassium ion batteries (KIBs), whose electrochemical performances are plagued by the destructive volumetric deformation and sluggish charge diffusion during the intercalation/deintercalation of large-size Na+ or K+. We demonstrated that precise control of the multidimensional factors of the HCNs is critical to offer an optimized design of sufficient reactive sites, excellent charge and mass transport kinetics, and resilient electrode structure and also provide a model system suitable for the study of complicated metal-ion storage mechanisms, such as Na+ storage in a hard carbon anode. We expect that this Account will spark new endeavors in the development of HCNs for various applications including energy conversion and storage, catalysis, biomedicine, and adsorption.