Effective stabilization of electrochemically prepared ecological oxidizing agent-ferrate(VI)-by encapsulation in zeolite and its application to water containing SARS-CoV-2 virus.

Improper and insufficient treatment of infectious hospital wastewater could seriously endanger public health and the environment. Ferrate(VI), a strong oxidizing, disinfecting, and coagulating agent, has the potential as a green solution for decontamination of water and wastewater. In this paper, electrochemically prepared potassium ferrate (K2 FeO4 ) with high purity was successfully encapsulated and applied to the water contaminated by SARS-CoV-2. Natural zeolite was chosen as an appropriate ecological material for ferrate encapsulation. The stability of encapsulated ferrate (in tablet form) was monitored for an extended time period (290 days) and has significantly increased in contrast with free potassium ferrate by almost 30%. Subsequently, the K2 FeO4 encapsulated with zeolite in tablet form was applied to the water and municipal water samples containing the SARS-CoV-2 virus. The removal efficiency reached up to 98.5% and 86.7%, respectively, under natural conditions. Combination of environmentally friendly oxidizing agent and natural excellent adsorbent leads to the creation of very effective water treatment matter. These findings are essentially immediate and especially important for immediate water treatment in urgent situations such as natural disasters or military conflict. PRACTITIONER POINTS: Electrochemical preparation of oxidizing agent, K2 FeO4 , in high purity by own constructed electrolyzer. Encapsulation of ferrate(VI) to natural zeolite threefold improving the stability during 9 months. SARS-CoV-2 virus was successfully removed from various contaminated types of water. High degradation efficiency of virus fragments by Fe(VI) was achieved without additional water adjustment, in natural pH range.

The Influence of Wet Granulation Parameters on the Compaction Behavior and Tablet Strength of a Hydralazine Powder Mixture.

The aim of this paper was to describe the influence of high-shear wet granulation process parameters on tablet tensile strength and compaction behavior of a powder mixture and granules containing hydralazine. The hydralazine powder mixture and eight types of granules were compacted into tablets and evaluated using the Heckel, Kawakita and Adams analyses. The granules were created using two types of granulation liquid (distilled water and aqueous solution of polyvinylpyrrolidone), at different impeller speeds (500 and 700 rpm) and with different wet massing times (without wet massing and for 2 min). Granulation resulted in improved compressibility, reduced dustiness and narrower particle-size distribution. A significant influence of wet massing time on parameters from the Kawakita and Adams analysis was found. Wet massing time had an equally significant effect on tablet tensile strength, regardless of the granulation liquid used. Granules formed with the same wet massing time showed the same trends in tabletability graphs. Tablets created using a single-tablet press (batch compaction) and an eccentric tablet press showed opposite values of tensile strength. Tablets from granules with a higher bulk density showed lower strength during batch compaction and, conversely, higher strength during eccentric tableting.