Efficient Removal of Deltamethrin from Aqueous Solutions Using a Novel Lanthanum Metal-Organic Framework: Adsorption Models and Optimization via Box-Behnken Design.

Eliminating pesticides is essential for lowering the dangers to our environment. To do this effectively, it is crucial to find adsorbents with remarkable adsorption capacities, easy retrieval, and separation. Metal-organic frameworks (MOFs) have been extensively recognized for their exceptional ability to absorb pollutants. Therefore, we used novel lanthanum metal-organic frameworks (La-MOFs) to eliminate deltamethrin (DEL) from aqueous solutions. We proved through experimentation that the La-MOF is an efficient adsorbent for DEL from water. A study of the material revealed that the adsorbent had a surface area of 952.96 m2 per gram and a pore volume of 1.038 cm3/g. These outcomes show how this substance can absorb particles. Utilizing kinetic models and conforming to the pseudo-second-order model, a thorough analysis of the efficiency of DEL adsorption onto La-MOF was conducted. To create a perfectly tailored approach, we utilized many parameters. The synthetic La-MOF adsorbent may undergo up to five steps of adsorption-desorption and has exceptional cyclability and reusability. To confirm purifying wastewater samples in the laboratory, the presentation of the established adsorbent was evaluated. For the management of industrial effluent and water filtration, the La-MOF adsorbent offered a simple and effective solution. Our investigation suggests that the method we describe for removing DEL from wastewater samples using the La-MOF adsorbent is unique.

Application of Metal-Organic Frameworks for Efficient Removal of Doxorubicin Hydrochloride: Removal Process Optimization and Biological Activity.

This study looked at the doxorubicin hydrochloride (DOX) anticancer drug's adsorption characteristics on a silver-based metal-organic framework (Ag-MOF). X-ray diffraction (XRD), scanning electron microscopy (SEM), and X-ray photoelectron spectroscopy (XPS) were used for the characterization of Ag-MOF. The pore volume and surface area of Ag-MOF were determined through Brunauer-Emmett-Teller (BET) testing at 77 K to be 0.509 cm3/g and 676.059 m2/g, respectively. Adsorption at pH 6 was established to be the best for DOX compared to alkaline solution. Ag-MOF has a good capacity for eliminating DOX (1.85 mmol/g), according to adsorption experiments. From the adsorption results, we can find that Langmuir is the most fitted adsorption isotherm model and the pseudo-second order model best fitted the adsorption kinetics. The energy of activation for adsorption, which was determined to be 15.23 kJ/mol, also supported a chemisorption process. The mechanism of adsorption was evaluated, and details of all possible interactions between DOX and Ag-MOF were illustrated. On the other hand, while examining the impact of temperature, we identified the thermodynamic constraints as ΔG°, ΔH°, and ΔS° and confirmed that the reaction was an endothermic one and spontaneous. Even after numerous reuse cycles, the efficiency remained constant. The synthetic adsorbent was remarkably recyclable at a rate of more than 91.6%. By using the MTT assay, the cytotoxicity of the tested Ag-MOF and DOX@Ag-MOF against human breast cancer cells (MCF-7) was evaluated in vitro. The in vitro antimicrobial activity of Ag-MOF and DOX@Ag-MOF was also tested.

Chromoionophoric probe-anchored mesoporous silica nanospheres for rapid and reliable naked-eye detection of Ni(II) ions in petroleum products and removal from electroplating wastewater.

This paper presents the expansion of an optical, chemical sensor that can rapidly and reliably detect, quantify, and remove Ni(II) ions in oil products and electroplating wastewater sources. The sensor is based on mesoporous silica nanospheres (MSNs) that have an extraordinary surface area, uniform surface morphology, and capacious porosity, making them an excellent substrate for the anchoring of the chromoionophoic probe,3'-{(1E,1' E)-[(4-chloro-1,2 phenylene)bis (azaneylylidene)]-bis(methaneylylidene)}bis(2-hydroxybenzoic acid) (CPAMHP). The CPAMHP probe is highly selective and sensitive to Ni(II), enabling it to be used in naked-eye colorimetric recognition of Ni(II) ions. The MSNs provide several accessible exhibited sites for uniform anchoring of CPAMHP probe molecules, making it a viable chemical sensor even with the use of naked-eye sensing. The surface characters and structural analysis of the MSNs and CPAMHP sensor samples were examined using various techniques. The CPAMHP probe-anchored MSNs exhibit a clear and vivid color shift from pale yellow to green upon exposure to various concentrations of Ni(II) ions, with a reaction time down to approximately 1 minute. Furthermore, the MSNs can serve as a base to retrieve extremely trace amounts of Ni(II) ions, making the CPAMHP sensor a dual-functional device. The calculated limit of recognition for Ni(II) ions using the fabricated CPAMHP sensor samples is 0.318 ppb (5.43 × 10-9 M). The results suggest that the proposed sensor is a promising tool for the sensitive and reliable detection of Ni(II) ions in petroleum products and for removing Ni(II) ions in electroplating wastewater; the data indicate an excellent removal of Ni (II) up to 96.8%, highlighting the high accuracy and precision of our CPAMHP sensor.

High Seroprevalence of SARS-CoV-2 IgG and RNA among Asymptomatic Blood Donors in Makkah Region, Saudi Arabia.

The gold-standard approach for diagnosing and confirming Severe Acute Respiratory Syndrome Corona Virus-2 (SARS-CoV-2) infection is reverse transcription-polymerase chain reaction (RT-PCR). This method, however, is inefficient in detecting previous or dormant viral infections. The presence of antigen-specific antibodies is the fingerprint and cardinal sign for diagnosis and determination of exposure to infectious agents including Corona virus disease-2019 (COVID-19). This cross-sectional study examined the presence of SARS-CoV-2 spike-specific immunoglobulin G (IgG) among asymptomatic blood donors in Makkah region. A total of 4368 asymptomatic blood donors were enrolled. They were screened for spike-specific IgG using ELISA and COVID-19 RNA by real-time PCR. COVID-19 IgG was detected among 2248 subjects (51.5%) while COVID-19-RNA was detected among 473 (10.8%) subjects. The IgG frequency was significantly higher among males and non-Saudi residents (p < 0.001 each) with no significant variation in IgG positivity among blood donors with different blood groups. In addition, COVID-19 RNA frequency was significantly higher among donors below 40-years old (p = 0.047, χ2 = 3.95), and non-Saudi residents (p = 0.001, χ2 = 304.5). The COVID-19 IgG levels were significantly higher among the RNA-positive donors (p = 001), and non-Saudi residents (p = 0.041), with no variations with age or blood group (p > 0.05). This study reveals a very high prevalence of COVID-19 IgG and RNA among asymptomatic blood donors in Makkah, Saudi Arabia indicating a high exposure rate of the general population to COVID-19; particularly foreign residents. It sheds light on the spread on COVID-19 among apparently healthy individuals at the beginning of the pandemic and could help in designing various control measures to minimize viral spread.

Modelling the Effect of COVID-19 Lockdown on Air Pollution in Makkah Saudi Arabia with a Supervised Machine Learning Approach.

To reduce the spread of COVID-19, lockdowns were implemented in almost every single country in the world including Saudi Arabia. In this paper, the effect of COVID-19 lockdown on O3, NO2, and PM10 in Makkah was analysed using air quality and meteorology data from five sites. Two approaches were employed: (a) comparing raw measured concentrations for the lockdown period in 2019 and 2020; and (b) comparing weather-corrected concentrations estimated by the machine learning approach with observed concentrations during the lockdown period. According to the first approach, the average levels of PM10 and NO2 decreased by 12% and 58.66%, respectively, whereas the levels of O3 increased by 68.67%. According to the second approach, O3 levels increased by 21.96%, while the levels of NO2 and PM10 decreased by 13.40% and 9.66%, respectively. The machine learning approach after removing the effect of changes in weather conditions demonstrated relatively less reductions in the levels of NO2 and PM10 and a smaller increase in the levels of O3. This showed the importance of adjusting air pollutant levels for meteorological conditions. O3 levels increased due to its inverse correlation with NO2, which decreased during the lockdown period.

Authentication of documents using polypropylene immobilized with rare-earth doped aluminate nanoparticles.

Anticounterfeiting of commercial products has been improved using photochromism as an intriguing approach. In order to develop a mechanically reliable nanocomposite, the engineering procedure of the anticounterfeiting nanocomposite must be improved. Rare-earth doped aluminate/polypropylene (REA/PP) hybrid nanofibers were successfully made by electrospinning, and they were shown to be mechanically stable and highly photoluminescent, making them ideal for anticounterfeiting applications. UV-induced photochromic anticounterfeiting properties were monitored in the synthesized nanocomposite films. In order to ensure that the REA-PP film is completely transparent, REA must be embedded into the polypropylene nanofibers in nano-sized particle shape to facilitate a better dispersion without agglomeration of REA particles in polypropylene matrix. The morphology and structure of REA were studied by transmission electron microscopy and X-ray diffraction. The morphologies and chemical contents of the polypropylene nanofibrous films were studied by scanning electron microscopy, X-ray fluorescence, and energy-dispersive X-ray spectroscopy. The REA-PP nanofibrous film showed absorbance and emission maxima at 365 and 517 nm, respectively. When exposed to UV light, the photochromic activity of the transparent nanofibrous substrates to greenish-yellow was rapid and reversible without fatigue. Hydrophobicity of REA-PP films increased without affecting their original look or mechanical properties, while increasing the REA content. It was possible to produce ultraviolet-induced photochromic nanofibrous films that were transparent, flexible, and cost-effective. As a result of this method, numerous anticounterfeiting materials could be developed toward a better marketplace with both economy and community values. HIGHLIGHTS: Rare-earth aluminate/polypropylene (REA/PP) electrospun nanofibers were prepared. The photochromic transparent nanofibers displayed green emission under UV light. The nanofibrous films were flexible, mechanically stable and highly luminescent. Films showed absorbance and emission maxima at 365 and 517 nm, respectively. Hydrophobicity was improved without affecting the films original properties.

Simple Preparation of Photoluminescent and Color-Tunable Polyester Resin Blended with Alkaline-Earth-Activated Aluminate Nanoparticles.

A simple inorganic/organic nanocomposite was used to generate long-lasting phosphorescent pebbles for easy commercial manufacturing of smart products. An organic/inorganic nanocomposite was made from low-molecular-weight unsaturated polyester and rare-earth-activated strontium aluminum oxide nanoparticles doped with europium and dysprosium. The polyester resin was mixed with phosphorescent strontium aluminate oxide nanoparticles and methylethyl ketone peroxide as a cross-linking agent to create a viscous mixture that can be hardened in a few minutes at room temperature. Before adding the hardener catalyst, the phosphorescent strontium aluminate nanoparticles were dispersed throughout the polyester resin in a homogeneous manner to ensure that the pigment did not accumulate. Long-lasting, reversible luminescence was shown by the photoluminescent substrates. The emission was reported at 515 nm upon exciting the pebble at 365 nm. In normal visible light, both blank and luminescent pebbles had a translucent appearance. As a result of UV irradiation, the photoluminescent pebbles produced an intense green color. The three-dimensional CIE Lab (International Commission on Illumination) color coordinates and luminescence spectra were used to investigate the color changing characteristics. Photophysical characteristics, including excitation, emission, and lifetime, were also investigated. Scanning electron microscopy, wavelength-dispersive X-ray fluorescence spectroscopy, and energy-dispersive X-ray analysis were employed to report the surface morphologies and elemental content. Without impairing the pebbles' original physico-mechanical characteristics, the pebbles showed improved superhydrophobic activity. The current simple colorless long-lasting phosphorescent nanocomposite can be applied to a variety of surfaces, like ceramics, glassware, tiles, and metals.

Simple preparation of novel photochromic polyvinyl alcohol/carboxymethyl cellulose security barcode incorporated with lanthanide-doped aluminate for anticounterfeiting applications.

Forgery and low-quality products pose a danger to society. Therefore, there are increasing demands for the production of easy-to-recognize and difficult-to-copy anticounterfeiting materials. Products with smart photochromic and fluorescence properties can change colour and emission spectra responding to a light source. In this context, we devised a straightforward preparation of a luminescent polyvinyl alcohol/carboxymethyl cellulose (PVA/CMC) nanocomposite to function as a transparent labelling film. The lanthanide-doped aluminate (LdA) was prepared in the nanoparticle form to indicate diameters of 35-115 nm. Different ratios of the LdA were physically dispersed in the PVA/CMC nanocomposite label film to provide photochromic, ultraviolet protection, antimicrobial activity, and hydrophobic properties. Fluorescence peaks were detected at 365 and 519 nm to indicate a colour change to green. As a result of increasing the phosphor ratio, improved superhydrophobic activity was achieved as the contact angle was increased from 126.1° to 146.0° without affecting the film's original physical and mechanical properties. Both ultraviolet (UV) light protection and antibacterial activity were also investigated. The films showed a quick and reversible photochromic response without fatigue. The current strategy reported the development of a photochromic smart label that is transparent, cost effective, and flexible. As a result, numerous anticounterfeiting products can benefit from the current label for a better market. LdA-loaded PVA/CMC films demonstrated antibacterial activity between poor, good, very good, and outstanding as the percentage of LdA in the film matrix increased. The current film can be applied as a transparent photochromic security barcode for anticounterfeiting applications and smart packaging.

Source Apportionment of Atmospheric PM10 in Makkah Saudi Arabia by Modelling Its Ion and Trace Element Contents with Positive Matrix Factorization and Generalised Additive Model.

In this paper, the emission sources of PM10 are characterised by analysing its trace elements (TE) and ions contents. PM10 samples were collected for a year (2019−2020) at five sites and analysed. PM10 speciated data were analysed using graphical visualization, correlation analysis, generalised additive model (GAM), and positive matrix factorization (PMF). Annual average PM10 concentrations (µg/m3) were 304.68 ± 155.56 at Aziziyah, 219.59 ± 87.29 at Misfalah, 173.90 ± 103.08 at Abdeyah, 168.81 ± 82.50 at Askan, and 157.60 ± 80.10 at Sanaiyah in Makkah, which exceeded WHO (15 µg/m3), USEPA (50 µg/m3), and the Saudi Arabia national (80 µg/m3) annual air quality standards. A GAM model was developed using PM10 as a response and ions and TEs as predictors. Among the predictors Mg, Ca, Cr, Al, and Pb were highly significant (p < 0.01), Se, Cl, and NO2 were significant (p < 0.05), and PO4 and SO4 were significant (p < 0.1). The model showed R-squared (adj) 0.85 and deviance explained 88.1%. PMF identified four main emission sources of PM10 in Makkah: (1) Road traffic emissions (explained 51% variance); (2) Industrial emissions and mineral dust (explained 27.5% variance); (3) Restaurant and dwelling emissions (explained 13.6% variance); and (4) Fossil fuel combustion (explained 7.9% variance).

Geo-environmental approach to assess heavy metals around auto-body refinishing shops using bio-monitors.

The vehicular industry is looking for continuous challenges to develop the sustainability of its manufacturing, maintenance processes, and vehicle emissions due to marketability, environmental, economic, and policy concerns. The present study focuses on the impact of these processes on the environment. In Pakistan, most of the auto-body refinishing processes are carried out in an open atmosphere. The shades of Azadirachta indica (Neem Tree) are generally used for the outdoor practice of scrapping, grinding, and painting in auto-body refinishing shops of Pakistan. Azadirachta indica leaves were selected as bio-indicator. For the present work, 26 affected sites and 10 control sites were selected from Karachi city, which is the financial hub and biggest city of Pakistan. Concentrations of different metals (Fe, Co, Cd, Cr, Cu, Mn, Mo, Ni, Pb, and Zn) were determined by atomic absorption spectrophotometer. A geographic information system (GIS) is used to present the variation in concentrations within Karachi city. The only positive correlation was observed in Pb and Mn (0.750). Principal component analysis (PCA) is applied to identify the anthropogenic effect between auto-body refinishing areas and control areas. Almost all analyzed metals show higher concentration at affected sites but Pb (87.14 mg/kg), Mn (46.47 mg/kg) and Fe (146.95 mg/kg) were leading the values, as compared to their concentration at control sites, Pb (48.83 mg/kg), Mn (15.23 mg/kg) and Fe (43.07 mg/kg). All analyzed metals are frequently present in different color pigments, whereas Pb, Mn, and Fe may also come from other sources, like the anti-knocking agent, vehicular exhaust, and scraping of car surface.

Compound A Increases Cell Infiltration in Target Organs of Acute Graft-versus-Host Disease (aGVHD) in a Mouse Model.

Systemic steroids are used to treat acute graft-versus-host disease (aGVHD) caused by allogenic bone marrow transplantation (allo-BMT); however, their prolonged use results in complications. Hence, new agents for treating aGVHD are required. Recently, a new compound A (CpdA), with anti-inflammatory activity and reduced side effects compared to steroids, has been identified. Here, we aimed to determine whether CpdA can improve the outcome of aGVHD when administered after transplantation in a mouse model (C57BL/6 in B6D2F1). After conditioning with 9Gy total body irradiation, mice were infused with bone marrow (BM) cells and splenocytes from either syngeneic (B6D2F1) or allogeneic (C57BL/6) donors. The animals were subsequently treated (3 days/week) with 7.5 mg/kg CpdA from day +15 to day +28; the controls received 0.9% NaCl. Thereafter, the incidence and severity of aGVHD in aGVHD target organs were analyzed. Survival and clinical scores did not differ significantly; however, CpdA-treated animals showed high cell infiltration in the target organs. In bulk mixed lymphocyte reactions, CpdA treatment reduced the cell proliferation and expression of inflammatory cytokines and chemokines compared to controls, whereas levels of TNF, IL-23, chemokines, and chemokine receptors increased. CpdA significantly reduced proliferation in vitro but increased T cell infiltration in target organs.

Impact of outdoor and indoor meteorological conditions on the COVID-19 transmission in the western region of Saudi Arabia.

Meteorological conditions may influence the incidence of many infectious diseases. Coronavirus disease-2019 (COVID-19) is a highly contagious, air-borne, emerging, viral disease caused by severe acute respiratory syndrome coronavirus-2 (SARS-CoV-2). In 2020, the COVID-19 global pandemic affected more than 210 countries and territories worldwide including Saudi Arabia. There are contradictory research papers about the correlation between meteorological parameters and incidence of COVID-19 in some countries worldwide. The current study investigates the impact of outdoor and indoor meteorological conditions on the daily recorded COVID-19 cases in western region (Makkah and Madinah cities) of Saudi Arabia over a period of 8 months from March to October 2020. Reports of the daily confirmed COVID-19 cases from the webpage of Saudi Ministry of Health (MOH) were used. Considering, the incubation period of COVID-19 which ranged from 2 to 14 days, the relationships between daily COVID-19 cases and outdoor meteorological factors (temperature, relative humidity, and wind speed) using a lag time of 10 days are investigated. The results showed that the highest daily COVID-19 cases in Makkah and Madinah were reported during the hottest months of the year (April-July 2020) when outdoor temperature ranged from 26.51 to 40.71 °C in Makkah and of 23.89-41.20 °C in Madinah, respectively. Partial negative correlation was detected between outdoor relative humidity and daily recorded COVID-19 cases. No obvious correlation could be demonstrated between wind speed and daily COVID-19 cases. This indicated that most of SARS-CoV-2 infection occurred in the cool, air-conditioned, dry, and bad-ventilated indoor environment in the investigated cities. These results will help the epidemiologists to understand the correlation between both outdoor and indoor meteorological conditions and SARS-CoV-2 transmissibility. These findings would be also a useful supplement to assist the local healthcare policymakers to implement and apply a specific preventive measures and education programs for controlling of COVID-19 transmission.

An overview of viruses discovered over the last decades and drug development for the current pandemic.

Since the discovery of the yellow fever virus in 1901, thus far, two hundred nineteen viral species are recognized as human pathogens. Each year, the number of viruses causing infections in humans increases, triggering epidemics and pandemics, such as the current COVID-19 pandemic. Pointing to bats as the natural host, in 2019, a genome highly identical to a bat coronavirus (COVID-19) spread all over the world, and the World Health Organization (WHO) officially confirmed it as a pandemic. The virus mainly spreads through the respiratory tract, uses angiotensin-converting enzyme 2 (ACE2) as a receptor, and is characterized by symptoms of fever, cough, and fatigue. Antivirals and vaccines have provided improvements in some cases, but the discovery of a new and diverse variety of viruses with outbreaks has posed a challenge in timely treatments for medical scientists. Currently, few specific antiviral strategies are being used, and many of the effective antiviral drugs and reported active molecules are under vital exploration. In this review, with the details of viral diseases, we summarize the current attempts in drug development, epidemiology, and the latest treatments and scientific advancements to combat the COVID-19 epidemic. Moreover, we discuss ways to reduce epidemics and pandemics in the near future.