Continuous Flow Synthesis of Functional Isocyanate-Free Poly(oxazolidone)s by Step-Growth Polymerization.

Flow chemistry presents many advantages over batch processes for the fast and continuous production of polymers under more robust, safer, and easily scalable conditions. Although largely exploited for chain-growth polymerizations, it has rarely been applied to step-growth polymerizations (SGP) due to their inherent limitations. Here, we report the facile and fast preparation of an emerging class of nonisocyanate polyurethanes, i.e., CO2-based poly(oxazolidone)s, by SGP in continuous flow reactors. Importantly, we also demonstrate that functional poly(oxazolidone)s are easily prepared by telescoping a flow module where SGP occurs with reagents able to simultaneously promote two polymer derivatizations in a second module, i.e., dehydration followed by cationic thiol-ene to yield poly(N,S-acetal oxazolidone)s. The functional polymer is produced at a high rate and functionalization degree, without requiring the isolation of any intermediates. This work demonstrates the enormous potential of flow technology for the facile and fast continuous production of functional polymers by SGP.

Covalent Adaptable Networks through Dynamic N,S-Acetal Chemistry: Toward Recyclable CO2-Based Thermosets.

Finding new chemistry platforms for easily recyclable polymers has become a key challenge to face environmental concerns and the growing plastics demand. Here, we report a dynamic chemistry between CO2-sourced alkylidene oxazolidones and thiols, delivering circular non-isocyanate polyurethane networks embedding N,S-acetal bonds. The production of oxazolidone monomers from CO2 is facile and scalable starting from cheap reagents. Their copolymerization with a polythiol occurs under mild conditions in the presence of a catalytic amount of acid to furnish polymer networks. The polymer structure is easily tuned by virtue of monomer design, translating into a wide panel of mechanical properties similar to commodity plastics, ranging from PDMS-like elastomers [with Young's modulus (E) of 2.9 MPa and elongation at break (εbreak) of 159%] to polystyrene-like rigid plastics (with E = 2400 MPa, εbreak = 3%). The highly dissociative nature of the N,S-acetal bonds is demonstrated and exploited to offer three different recycling scenarios to the thermosets: (1) mechanical recycling by compression molding, extrusion, or injection molding─with multiple recycling (at least 10 times) without any material property deterioration, (2) chemical recycling through depolymerization, followed by repolymerization, also applicable to composites, and (3) upcycling of two different oxazolidone-based thermosets into a single one with distinct properties. This work highlights a new facile and scalable chemical platform for designing highly dynamic polymer networks containing elusive oxazolidone motifs. The versatility of this chemistry shows great potential for the preparation of materials (including composites) of tuneable structures and properties, with multiple end-of-life scenarios.

Facile Access to CO2 -Sourced Polythiocarbonate Dynamic Networks And Their Potential As Solid-State Electrolytes For Lithium Metal Batteries.

Poly(monothiocarbonate)s are an interesting class of sulfur-containing materials whose application as solid polymer electrolytes was barely studied, certainly due to the elusive production of diversified polymer architectures. Herein, a new liquid CO2 -sourced bis(α-alkylidene cyclic carbonate) monomer was designed at high yield to allow its one-step and solvent-free copolymerization with thiols to produce linear and cross-linked polymers in mild conditions. The influence of the monomer structure on the thermal properties and the ionic conductivity of linear polymers was assessed. The polymer network showed to be thermally re-processable owing to the dynamic nature of the monothiocarbonate bonds. A solid polymer electrolyte was easily obtained from the cross-linked material when combined with LiTFSI salt. The solid polymer electrolyte was characterized by an ionic conductivity reaching 6×10-6  S cm-1 at room temperature with a lithium transference number of 0.37 and a wide electrochemical stability window (4.0 V vs Li0 /Li+ ) valid for lithium cycling. This work thus reports an attractive valorizing approach for carbon dioxide to deliver under mild operating conditions poly(monothiocarbonate)-containing novel covalent adaptable network materials of high potential for energy applications, especially as solid electrolytes for batteries.

Role of redox-active axial ligands of metal porphyrins adsorbed at solid-liquid interfaces in a liquid-STM setup.

In a liquid-STM setup environment, the redox behavior of manganese porphyrins was studied at various solid-liquid interfaces. In the presence of a solution of Mn(III)Cl porphyrins in 1-phenyloctane, which was placed at a conductive surface, large and constant additional currents relative to a set tunneling current were observed, which varied with the magnitude of the applied bias voltage. These currents occurred regardless of the type of surface (HOPG or Au(111)) or tip material (PtIr, Au or W). The additional currents were ascribed to the occurrence of redox reactions in which chloride is oxidized to chlorine and the Mn(III) center of the porphyrin moiety is reduced to Mn(II). The resulting Mn(II) porphyrin products were identified by UV-vis analysis of the liquid phase. For solutions of Mn(III) porphyrins with non-redox active acetate instead of chloride axial ligands, the currents remained absent.

Self-Assembly of Covalently Linked Porphyrin Dimers at the Solid-Liquid Interface.

The synthesis and surface self-assembly behavior of two types of metal-porphyrin dimers is described. The first dimer type consists of two porphyrins linked via a rigid conjugated spacer, and the second type has an alkyne linker, which allows rotation of the porphyrin moieties with respect to each other. The conjugated dimers were equipped with two copper or two manganese centers, while the flexible dimers allowed a modular built-up that also made the incorporation of two different metal centers possible. The self-assembly of the new porphyrin dimers at a solid-liquid interface was investigated at the single-molecule scale using scanning tunneling microscopy (STM). All dimers formed monolayers, of which the stability and the internal degree of ordering of the molecules depended on the metal centers in the porphyrins. While in all monolayers the dimers were oriented coplanar with respect to the underlying surface ('face-on'), the flexible dimer containing a manganese and a copper center could be induced, via the application of a voltage pulse in the STM setup, to self-assemble into monolayers in which the porphyrin dimers adopted a non-common perpendicular ('edge-on') geometry with respect to the surface.

The prevalence of antibodies against the HLA-DRB3 protein in kidney transplantation and the correlation with HLA expression.

Human leukocyte antigen (HLA)-DRB3 is a functional HLA class II gene, which has a limited allele diversity in the human population. Furthermore, the HLA-DRB3 gene is only present in a subset of individuals. Therefore, in organ transplantation, this HLA molecule is frequently mismatched between patient and graft donor and thus antibodies against this mismatched HLA molecule can develop. In this study, we aimed to evaluate the prevalence and reactivity of these antibodies and aimed to identify factors that underlie antibody formation against HLA-DRB3. We showed in our patient cohort that HLA-DRB3 antibodies are identified in about 7% of all patients that were screened with solid phase assays. In these assays, we observed multiple antibody reactivity patterns indicating that HLA-DRB3 harbours multiple epitopes. In those cases, where we succeeded at tracing back the induction of these antibodies to the molecular HLA typing of the immunogenic event, we noticed a different frequency of HLA-DRB1 allele groups in the donors as compared to a control group. To a certain extent this distribution (e.g. HLA-DRB1*11 individuals) could be linked to an altered expression level. However, it also appears that different HLA-DRB3 alleles (e.g. HLA-DRB3*01 group) vary in their immunogenicity without having an expression difference. In conclusion, our study provides information on the immunogenicity and reactivity patterns of antibodies against HLA-DRB3 in kidney transplantation, and it points towards the possibility of HLA expression as a factor underlying antibody formation.

Pathogen recognition by NK cells amplifies the pro-inflammatory cytokine production of monocyte-derived DC via IFN-γ.

BACKGROUND: Besides their prominent role in the elimination of infected or malignantly transformed cells, natural killer (NK) cells serve as modulators of adaptive immune responses. Enhancing bidirectional crosstalk between NK cells and dendritic cells (DC) is considered a promising tool to potentiate cancer vaccines. We investigated to what extent direct sensing of viral and bacterial motifs by NK cells contributes to the response of inflammatory DC against the same pathogenic stimulus. RESULTS: We demonstrated that sensing of bacterial and viral PAMPs by NK cells contributes to DC cytokine production via NK cell-derived soluble factors. This enhancement of DC cytokine production was dependent on the pattern recognition receptor (PRR) agonist but also on the cytokine environment in which NK cells recognized the pathogen, indicating the importance of accessory cell activation for this mechanism. We showed in blocking experiments that NK cell-mediated amplification of DC cytokine secretion is dependent on NK cell-derived IFN-γ irrespective of the PRR that is sensed by the NK cell. CONCLUSIONS: These findings illustrate the importance of bidirectional interaction between different PRR-expressing immune cells, which can have implications on the selection of adjuvants for vaccination strategies.

The development of D antibodies after D-mismatched kidney transplantation in a setting of reduced immunosuppression.

BACKGROUND: D antigens are not taken into account in the allocation of solid organs. Female transplant recipients with D antibodies as a consequence of D-mismatched kidney transplantation may develop hemolytic disease of the fetus and newborn in future pregnancies. We examined D antibody development in transplant recipients who received D-mismatched kidney transplantation in absence of D prophylaxis and in a setting of reduced immunosuppression. STUDY DESIGN AND METHODS: From 1993 until 2015, a total of 1355 kidney patients received transplantations in our center of whom 156 received a D-mismatched graft. A retrospective analysis was conducted; frozen stored sera obtained from transplant recipients 3 months after transplantation were tested for irregular red blood cell (RBC) antibodies using a three-cell screening and an identification panel. In the case of D antibody positivity, additional testing was performed 1 month before transplantation. RESULTS: In seven of 156 (4.5%) transplant recipients we found irregular RBC antibodies after transplantation, of which five (3.2%) were determined to be D antibodies. We observed only one (0.6%) recipient without D antibodies before transplantation. CONCLUSION: Although the risk of D antibody development is considerably lower after D-mismatched kidney transplantation than D-mismatched pregnancy, anti-D prophylaxis may still be advisable for female transplant recipients of childbearing age.

Fractionated Radiotherapy with 3 x 8 Gy Induces Systemic Anti-Tumour Responses and Abscopal Tumour Inhibition without Modulating the Humoral Anti-Tumour Response.

Accumulating evidence indicates that fractionated radiotherapy (RT) can result in distant non-irradiated (abscopal) tumour regression. Although preclinical studies indicate the importance of T cells in this infrequent phenomenon, these studies do not preclude that other immune mechanisms exhibit an addition role in the abscopal effect. We therefore addressed the question whether in addition to T cell mediated responses also humoral anti-tumour responses are modulated after fractionated RT and whether systemic dendritic cell (DC) stimulation can enhance tumour-specific antibody production. We selected the 67NR mammary carcinoma model since this tumour showed spontaneous antibody production in all tumour-bearing mice. Fractionated RT to the primary tumour was associated with a survival benefit and a delayed growth of a non-irradiated (contralateral) secondary tumour. Notably, fractionated RT did not affect anti-tumour antibody titers and the composition of the immunoglobulin (Ig) isotypes. Likewise, we demonstrated that treatment of tumour-bearing Balb/C mice with DC stimulating growth factor Flt3-L did neither modulate the magnitude nor the composition of the humoral immune response. Finally, we evaluated the immune infiltrate and Ig isotype content of the tumour tissue using flow cytometry and found no differences between treatment groups that were indicative for local antibody production. In conclusion, we demonstrate that the 67NR mammary carcinoma in Balb/C mice is associated with a pre-existing antibody response. And, we show that in tumour-bearing Balb/C mice with abscopal tumour regression such pre-existing antibody responses are not altered upon fractionated RT and/or DC stimulation with Flt3-L. Our research indicates that evaluating the humoral immune response in the setting of abscopal tumour regression is not invariably associated with therapeutic effects.

Dynamic rearrangement of bilayers of porphyrin hetero-dimers at a solid/liquid interface.

STM reveals that self-assembled bilayers of covalently linked Cu-Mn porphyrin dimers can dynamically rearrange at a solid/liquid interface by rapid exchange of molecules between the bilayer and the supernatant, or via a slower two-dimensional translation of the whole top layer.

Detection of different oxidation states of individual manganese porphyrins during their reaction with oxygen at a solid/liquid interface.

Manganese porphyrins have been extensively investigated as model systems for the natural enzyme cytochrome P450 and as synthetic oxidation catalysts. Here, we report single-molecule studies of the multistep reaction of manganese porphyrins with molecular oxygen at a solid/liquid interface, using a scanning tunnelling microscope (STM) under environmental control. The high lateral resolution of the STM, in combination with its sensitivity to subtle differences in the electronic properties of molecules, allowed the detection of at least four distinct reaction species. Real-space and real-time imaging of reaction dynamics enabled the observation of active sites, immobile on the experimental timescale. Conversions between the different species could be tuned by the composition of the atmosphere (argon, air or oxygen) and the surface bias voltage. By means of extensive comparison of the results to those obtained by analogous solution-based chemistry, we assigned the observed species to the starting compound, reaction intermediates and products.

Polymorphism in porphyrin monolayers: the relation between adsorption configuration and molecular conformation.

Self-assembled monolayers of meso-5,10,15,20-tetrakis(undecyl)porphyrin copper(II) on a graphite/1-octanoic acid interface have been studied by Scanning Tunnelling Microscopy. Four distinct polymorphs were observed, varying in their unit cell size. Arrays of unit cells of the various polymorphs seamlessly connect to each other via shared unit cell vectors. The monolayers are not commensurate, but coincident with the underlying graphite substrate. The seamless transition between the polymorphs is proposed to be the result of an adaptation of the molecular conformations in the polymorphs and at the boundaries, which is enabled by the conformational freedom of the alkyl tails of these molecules.

Controlled templating of porphyrins by a molecular command layer.

The copper porphyrin (5,10,15,20-tetraundecylporphyrinato)copper(II) can be templated in a well-defined arrangement using p-(hexadecyloxycarbonyl)phenylacetylene as a command layer on graphite. The bicomponent system was characterized at the submolecular level at a solid/liquid interface by scanning tunneling microscopy (STM). It is proposed that the layer of copper porphyrins is templated on top of the command layer in a hierarchical fashion, via a combination of intermolecular π-π stacking and van der Waals interactions. A very subtle effect, i.e., a superstructure in the alkyl chain region of the phenylacetylene monolayers, was identified as a decisive factor for the templating process.