Adsorption kinetics of methylene blue from wastewater using pH-sensitive starch-based hydrogels.

In this work, starch/poly(acylic acid) hydrogels were synthesized through a free radical polymerization technique. The molar ratios of acrylic acid to N,N'-methylenebisacrylamide were 95:5, 94:6, and 93:7. The samples exhibited an amorphous porous structure, indicating that the size of the pores was contingent upon the amount of cross-linking agent. The quantity of acrylic acid in structure rose with a little increase in the amount of the cross-linking agent, which improved the hydrogels' heat stability. The swelling characteristics of the hydrogels were influenced by both the pH level and the amount of cross-linking agent. The hydrogel with a ratio of 94:6 exhibited the highest degree of swelling (201.90%) at a pH of 7.4. The dominance of the Fickian effect in regulating water absorption in the synthesized hydrogels was demonstrated, and the kinetics of swelling exhibited agreement with Schott's pseudo-second order model. The absorption of methylene blue by the hydrogels that were developed was found to be influenced by various factors, including the concentration of the dye, the quantity of the cross-linking agent, the pH level, and the duration of exposure. The hydrogel 95:5 exhibited the highest adsorption effectiveness (66.7%) for the dye solution with a concentration of 20 mg/L at pH 10.0. The examination of the kinetics and isotherms of adsorption has provided evidence that the process of physisorption takes place on heterogeneous adsorbent surfaces and can be explained by an exothermic nature.

New insights in polydopamine formation via surface adsorption.

Polydopamine is a biomimetic self-adherent polymer, which can be easily deposited on a wide variety of materials. Despite the rapidly increasing interest in polydopamine-based coatings, the polymerization mechanism and the key intermediate species formed during the deposition process are still controversial. Herein, we report a systematic investigation of polydopamine formation on halloysite nanotubes; the negative charge and high surface area of halloysite nanotubes favour the capture of intermediates that are involved in polydopamine formation and decelerate the kinetics of the process, to unravel the various polymerization steps. Data from X-ray photoelectron and solid-state nuclear magnetic resonance spectroscopies demonstrate that in the initial stage of polydopamine deposition, oxidative coupling reaction of the dopaminechrome molecules is the main reaction pathway that leads to formation of polycatecholamine oligomers as an intermediate and the post cyclization of the linear oligomers occurs subsequently. Furthermore, TRIS molecules are incorporated into the initially formed oligomers.

Temperature-responsive and biocompatible nanocarriers based on clay nanotubes for controlled anti-cancer drug release.

Administration of temperature-responsive drug carriers that release anticancer drugs at high temperatures can benefit hyperthermia therapies because of the synergistic effect of anticancer drug molecules and high temperature on killing the cancer cells. In this study, we design and characterize a new temperature-responsive nanocarrier based on a naturally occurring and biocompatible clay mineral, halloysite nanotubes. Poly(N-isopropylacrylamide) brushes were grown on the surface of halloysite nanotubes using a combination of mussel-inspired dopamine polymerization and surface-initiated atom transfer radical polymerization. The chemical structure of the hybrid materials was investigated using X-ray photoelectron spectroscopy, thermogravimetric analysis and energy-dispersive X-ray spectroscopy. The hybrid material was shown to have a phase transition temperature of about 32 °C, corresponding to a 40 nm thick polymer layer surrounding the nanotubes. Cell studies suggested that grafting of poly(N-isopropylacrylamide) brushes on the polydopamine-modified halloysite nanotubes suppresses the cytotoxicity caused by the polydopamine interlayer and drug release studies on nanotubes loaded with doxorubicin showed that thanks to the poly(N-isopropylacrylamide) brushes a temperature-dependent drug release is observed. Finally, a fluorescent dye molecule was covalently attached to the polymer-grafted nanotubes and stimulated emission depletion nanoscopy was used to confirm the internalization of the nanotubes in HeLa cells.

Robust antimicrobial photodynamic therapy with curcumin-poly (lactic-co-glycolic acid) nanoparticles against COVID-19: A preliminary in vitro study in Vero cell line as a model.

BACKGROUND: In this study, the ability of antimicrobial photodynamic therapy (aPDT) as a treatment approach and adjuvant therapy using curcumin-poly (lactic-co-glycolic acid) nanoparticles (Cur@PLGA-NPs) to inactivate Coronavirus disease 2019 (COVID-19) in plasma was investigated. Furthermore, to verify whether the quality requirement of aPDT-treated plasma is acceptable, the differences of the levels of clotting factors, total plasma proteins, and anti-A and/or anti-B antibodies titrations in plasma of patient before and after aPDT treatment were investigated. MATERIALS AND METHODS: Cur@PLGA-NPs was synthesized using Electrospinning process and characterized by different analysis including Scanning Electron Microscope (SEM), Transmission Electron Microscope (TEM), and Fourier Transform Infrared (FTIR) spectroscopy assays. The presence of the SARS-CoV-2 in the plasma samples of patients suspected of having COVID-19 was confirmed by real-time reverse transcription-polymerase chain reaction (RT-PCR) assay. Then, the treated plasma samples with Cur@PLGA-NPs plus blue laser were exposed to Vero cells. Eventually, cell cytotoxicity and apoptotic effects of treated Vero cells were evaluated. Levels of clotting factors including prothrombin time (PT) and activated partial thromboplastin time (APTT), total plasma proteins, and anti-A and/or anti-B antibodies measurements were performed using the coagulometer, method of Bradford, and titration procedure, respectively. RESULTS: The presence of SARS-CoV-2 was positive in 84.3 % of samples. Different concentrations of Cur@PLGA-NPs (3, 5, 7, and 10 % wt.), the irradiation times of blue laser (1, 3, and 5 min), and aPDT with the maximum dosed of blue laser light (522.8 J/cm2) plus 10 % wt. Cur@PLGA-NPs had no cytotoxicity. Although there were significant cell degradation and apoptotic effects in treated Vero cells with treated plasma using 10 % wt. Cur@PLGA-NPs, and a blue laser at an energy density of 522.8 J/cm2, no visible changes in cells and apoptosis were observed following aPDT. Total plasma protein content, PT, APTT, and anti-A and/or anti-B antibodies titers showed no significant changes (P > 0.05 for all comparisons) in treated plasma as compared to untreated plasma. CONCLUSION: aPDT exhibited in vitro anti-COVID-19 activities in the treated plasma containing SARS-COV-2 without Vero cell apoptosis and any adverse effects on plasma quality in aPDT-exposed plasma.

Step-by-step design of poly (ε-caprolactone) /chitosan/Melilotus officinalis extract electrospun nanofibers for wound dressing applications.

Composition of polymers and choosing the type of solvents in electrospinning systems is of great importance to achieve a mat with optimal properties. In this work, with emphasizing the influence of a novel solvent system, an electrospun wound dressing was designed in four steps. Firstly, to study the effect of polymer-solvent interactions and electrospinning distance, a constant amount of polycaprolactone (PCL) was dissolved at different compositions of formic acid (FA)/dichloromethane (DCM) and was electrospun at different distances. The composition of 80FA/20DCM and distance of 15 cm were selected as optimal conditions by lowest average diameter of fibers and simultaneously good surface uniformity. In the second step, the concentration of PCL was considered variable to achieve the lowest diameter of fibers. Finally, in the third and fourth steps, different concentrations of chitosan (CN) and constant dosage of Melilotus officinalis (MO) extract were added to the solution. The extract contained fibers had a mean diameter of 275 ± 41 nm which is in the required condition for wound caring. Eventually, the optimized PCL/CN and PCL/CN/MO specimens were evaluated by FTIR, DSC, Tensile, water contact angle, antibacterial assays, cell viability, and drug release analysis for determining their function and properties.

Shear bond strength, adhesive remnant index, and anti-biofilm effects of a photoexcited modified orthodontic adhesive containing curcumin doped poly lactic-co-glycolic acid nanoparticles: An ex-vivo biofilm model of S. mutans on the enamel slab bonded brackets.

BACKGROUND: Potential complications during fixed orthodontic procedures are white spot lesions (WSLs) and tooth decay. This study evaluated the anti-biofilm activity of an orthodontic adhesive (OA) incorporating curcumin (Cur) doped Poly lactic-co-glycolic acid nanoparticles (Cur-PLGA-NPs), which can have the highest concentration of Cur-PLGA-NPs and shear bond strength (SBS) value simultaneously, against cariogenic bacteria i.e., Streptococcus mutans. MATERIALS AND METHODS: Following synthesis and confirmation of Cur-PLGA-NPs, SBS and adhesive remnant index (ARI) of the modified orthodontic adhesives (MOA) containing Cur-PLGA-NPs (3, 5, 7, and 10 % wt.) were measured using universal testing machine and stereomicroscope, respectively. After artificial aging (continuously rinsed up to 180 days), the residual anti-biofilm ability of MOA which can have the highest concentration of Cur-PLGA-NPs and SBS value simultaneously were determined by anti-biofilm assay following photoexcited enamel slab bonded brackets by MOA containing Cur-PLGA-NPs against S. mutans biofilms using crystal violet assay. RESULTS: Adhesive with 7 % wt. Cur-PLGA-NPs revealed the highest concentration of Cur-PLGA-NPs and SBS value (16.19 ± 2.69 MPa, P < 0.05) simultaneously. No statistically significant difference in ARI scores was observed between the MOA and control (Transbond XT without the Cur-PLGA-NPs). On days 15, 30, 60, 90 and 120 there was a considerable decrease in optical density (OD) of preformed S. mutans biofilms on photoexcited enamel slab bonded brackets using MOA containing 7 % wt. Cur-PLGA-NPs, to 94.1 %, 79.6 %, 69.6 %, 69.4 %, and, 55.1 % respectively in comparison to the control group (all, P < 0.05). From days 150 onwards, microbial biofilm formation was progressively increased on enamel slab bonded brackets using MOA containing 7 % wt. Cur-PLGA-NPs compared to the control group (OA). Although chlorhexidine (2 %; as positive control) showed significant activity against pre-formed S. mutans biofilms on enamel slab bonded brackets using OA (99.1 % biofilm reduction; P = 0.001), its activity was slightly higher but not significant than photoexcited enamel slab bonded brackets using MOA containing 7 % wt. Cur-PLGA-NPs on the days 15 and 30 (both, P > 0.05). CONCLUSIONS: The 7 % wt. Cur-PLGA-NPs can serve as an orthodontic adhesive antimicrobial additive as exposure to blue laser provides an acceptable antimicrobial effect against cariogenic bacteria for a considerable time.

Nitrogen and phosphorous doped graphene quantum dots: Excellent flame retardants and smoke suppressants for polyacrylonitrile nanocomposites.

Nitrogen (N-GQD) as well as nitrogen and phosphorous co-doped (NP-GQD) graphene quantum dots were demonstrated as novel, low cost, green and highly effective flame retardants and smoke suppressants for polyacrylonitrile (PAN) nanocomposites. The N-GQD and NP-GQD samples were synthesized by hydrothermal method with citric acid as the main reactant. For the first time, the flame retardant and smoke suppressant properties of the NP-GQD were studied. The GQDs were introduced into PAN by solvent blending route. Subsequently, thermal stability, flame retardancy, fire behavior, fire hazard and structure of the residual char were investigated by thermogravimetric analysis (TGA), UL-94 vertical burning test, cone calorimetry, FE-SEM, and Raman spectroscopy. Results showed that both PAN/N-GQD and PAN/NP-GQD nanocomposites had higher flame retardancy and smoke suppressant behavior in addition to lower fire hazard properties than neat PAN. Furthermore, the residual chars for the nanocomposite samples were increased in comparison to the neat PAN. The improvements were even more significant in case of the PAN/NP-GQD due to the synergistic effect of nitrogen and phosphorous. The improvements were mainly ascribed to the ability of the N-GQD and NP-GQD to provide stronger and larger protective char barrier layers, which was even more pronounced in case of the NP-GQD.

Role of sequence of feeding on the properties of polyurethane nanocomposite containing halloysite nanotubes.

Polyurethane/Halloysite Nantubes nanocomposites containing 1 wt.% nanoparticles were prepared using in situ polymerization method with different mixing sequences. Various experiments have been performed in order to evaluate the effect of nanoparticle dispersion and the different orders of mixing of the samples on the mechanical properties and morphology of nanocomposites. The results obtained from the ATR-FTIR test demonstrated that the presence of nanoparticles led to an increase in phase separation, and the sample with the best nanoparticle dispersion has shown more phase separation than the other samples. Furthermore, the results of the Differential scanning calorimetry (DSC) also confirmed more phase separation and the crystallinity of the samples in the presence of nanoparticles. Scanning electron microscope (SEM) images were utilized in order to investigate the dispersion of nanoparticles in polyurethane matrix and to examine surface fracture of the samples. Moreover, differential mechanical thermal analysis (DMTA) revealed that the presence of nanoparticles has altered the glass transition temperature of polymers, and there are physical and chemical interaction and hydrogen bonding between nanoparticles and hard and soft polyurethane segments. In addition, in the presence of nanoparticles the damping of the samples was reduced compared to the neat sample. Change in behavior from liquid like to solid like in the range of low angular frequencies was observed which is in agreement with the formation of a network structure that can be broken even at low shear rates. In the second step, kinetics of the phase separation process of thermoplastic polyurethane and nanocomposites was studied by rheological experiments. The results showed that the kinetics of phase separation process of thermoplastic polyurethane is similar to that of the crystallization process. Phase separation kinetics of neat samples and nanocomposite have been studied. The presence of nanoparticles by nucleation mechanism increased the rate of the phase separation.

Sericin grafted multifunctional curcumin loaded fluorinated graphene oxide nanomedicines with charge switching properties for effective cancer cell targeting.

Fluorinated graphene has recently gained much attention for cancer drug delivery, owing to its peculiar properties including high electronegativity difference, magnetic resonance imaging contrast agent, and the photothermal effect. However, the hydrophobic nature of fluorinated graphene greatly hinders its application as a biological material. Herein, a novel green method is reported for synthesis of a pH-sensitive charge-reversal and water-soluble fluorinated graphene oxide, modified with polyethyleneimine anchored to sericin-polypeptide (FPS). This nanocarrier was further loaded with curcumin (Cur), and characterized as a nanocarrier for anti-cancer drug delivery. The synthesized nanocarriers contain two different pH-sensitive amide linkages, which are negatively charged in blood pH (≈7.4) and can prolong circulation times. The amide linkages undergo hydrolysis once they reach the mildly acidic condition (pH≈6.5, corresponding to tumor extracellular matrix), and subsequently once reached the lower acidic condition (pH≈5.5, corresponded to endo/lysosomes microenvironment), the FPS charge can be switched to positive (≈+28 mV), which aids the nuclear release. This nanocarrier was designed to selectively enhance cell internalization and nuclear-targeted delivery of curcumin in HeLa, SkBr3 and PC-3 cancer cells. Moreover, FPS-Cur demonstrated high curcumin loading capacity, prolonged curcumin release and promotion of apoptosis in HeLa, SkBr3 and PC-3 cells. Therefore, with its pH-responsive charge-reversal properties, FPS-Cur would be a promising candidate for chemotherapy of cervical, breast and prostate cancers.

Surfactant-assisted-water-exposed versus surfactant-aqueous-solution-exposed electrospinning of novel super hydrophilic Polycaprolactone-based fibers: Cell culture studies.

Blend electrospun scaffolds composed of Polycaprolactone and Pluronic are suitable for bone tissue engineering due to their excellent biocompatibility and hydrophilicity. However, exceeding from certain amounts of Pluronic, surface enrichment of this polymer leads to segregation of Pluronic chains within the fiber, endangering the integrity and mechanical properties of the scaffold. In this article, a novel method of blend electrospinning has been employed using a parallel water supply, positioning the Pluronic chains on the surface, thus enhancing the miscibility within the fibers. Water uptake test revealed the super hydrophilicity of obtained scaffolds. Atr-FTIR and X-ray photoelectron spectroscopy verified a higher percentage of Pluronics on the surface in comparison with conventional blend electrospinning. Tensile test demonstrated improved mechanical properties of the modified scaffolds. The results of cytocompatibility tests have also revealed enhanced viability of cells on these scaffolds confirming their great promise for clinical applications. © 2019 Wiley Periodicals, Inc. J Biomed Mater Res Part A: 107A: 1204-1212, 2019.

Surfactant-assisted-water-exposed versus surfactant-aqueous-solution-exposed electrospinning of novel super hydrophilic polycaprolactone based fibers: Analysis of drug release behavior.

Surface hydrophilicity and scaffold integrity determine the drug release behavior of drug loaded electrospun fibrous mats. When mixture miscibility is acceptable, blend electrospinning of hydrophobic with hydrophilic polymers can improve scaffold hydrophilicity while the hydrophobic polymer maintains the mechanical strength of scaffold. Polycaprolactone (PCL) and Pluronic P123 (P123) blend electrospinning has been investigated. In routine blend electrospinning, surface enrichment of Pluronic sets a limit for P123 weight ratio in which exceeding from that limit causes the excess P123 to be accumulated within the electrospun fiber core. To overcome this setback, a method named surfactant assisted water exposed (SAWE) electrospinning was introduced which was proven to be effective for increasing the surface enrichment of Pluronic. In order to test the validity of this method, the electrospinning of solution containing PCL which is exposed to aqueous solution of P123 was investigated. This new method was named surfactant aqueous solution exposed (SASE) electrospinning. Myelin formation at the contact interface of aqueous solution and chloroform solution was studied and it was found that this layer can effectively barricade the migration of Pluronic chains between immiscible phases. For SASE, fiber surface coverage by P123 was uneven and loose. Electrospun scaffolds from SAWE and SASE were loaded with drug to investigate the effect of the exposure time during electrospinning on in vitro drug release. By increasing the exposure time, the abnormal two-stage phased release profile of SAWE became normal with moderate initial burst. Longer exposure time increased the initial burst of the drug loaded SASE fibers. © 2018 Wiley Periodicals, Inc. J Biomed Mater Res Part A: 107A: 597-609, 2019.

Synthesis of dual temperature - and pH-responsive yolk-shell nanoparticles by conventional etching and new deswelling approaches: DOX release behavior.

Dual stimuli-responsive yolk-shell nanoparticles with cross-linked poly(acrylic acid) (PAA) pH-responsive core and cross-linked poly(2-hydroxyethyl methacrylate) (PHEMA) temperature-responsive shell were synthesized via two different methods In the first method, silica encapsulated PAA (PAA@SiO2) was used as seed in distillation precipitation polymerization (DPP) of HEMA to yield PAA@SiO2@PHEMA from which silica layer was etched by HF solution to produce yolk-shell PAA@air@PHEMA nanoparticles. In the second method, swollen PAA nanoparticles at pH = 10 were used as seeds in emulsion polymerization of HEMA to yield core-shell PAA@PHEMA nanoparticles. After dispersion of PAA@PHEMA nanoparticles in acidic medium at pH = 2, yolk-shell nanoparticles were formed through deswelling of pH-responsive cores due to protonation of carboxyl groups. Synthesized nanoparticles were characterized using FT-IR, FE-SEM and TEM methods to observe yolk-shell nanostructure for both synthesis routes. Stimuli-responsive behavior of the nanoparticles was investigated by UV-vis spectrometer where similar behaviors were obtained for template-assisted and template-free synthesized yolk-shell nanoparticles. Finally, both yolk-shell nanoparticles were examined as potential carriers for controlled release of doxorubicin hydrochloride (DOX) anti-cancer drug.

Fabrication and characterization of polymer-ceramic nanocomposites containing drug loaded modified halloysite nanotubes.

Modified halloysite nanotubes (HNT-NH2 and HNT-COOH) were synthesized by a coupling reaction with 3-aminopropyltriethoxysilane and maleic anhydride from hydroxyl groups of neat halloysite nanotubes (HNTs). Successful attachment of functional groups onto HNTs was evaluated by Fourier transform infrared and thermogravimetric analysis. X ray diffraction was used to study the crystalline structure of scaffolds and the formation of intercalated structure as a result of improved dispersion and decreased agglomeration of modified nanoparticles. Neat HNT, HNT-NH2 , and HNT-COOH were subsequently introduced into polycaprolactone/Pluronic P123 (PCL/P123) electrospun substrate. Morphology, thermodynamics, mechanics, and biocompatibility of resulted electrospun nanocomposites were evaluated. Nanofibers containing modified HNTs showed excellent mechanical performance and thermal stability in comparison with those containing neat HNTs. homogeneous dispersion of the modified HNTs and strong interfacial adhesion between nanotubes and polymer matrix can be considered for mentioned improvements. Ultraviolet-visible spectrophotometer was used to study diphenhydramine hydrochloride and diclofenac sodium release from nanocomposites containing drug loaded modified and neat HNTs. Nanocomposites containing drug loaded HNT-COOH exhibited prolonged release of drug molecules in comparison with that of neat HNTs. MTT assay reveled that PCL/P123/modified HNTs nanocomposites provide a suitable platform for cell growth where PCL/P123/HNT-NH2 can facilitate cell attachment through electrostatic interactions between negatively charged phospholipids bilayer membrane of cells and positively charged HNT-NH2 embedded in PCL/P123 substrate. © 2018 Wiley Periodicals, Inc. J Biomed Mater Res Part A: 106A: 1276-1287, 2018.

N,N'-methylenebis(acrylamide)-crosslinked poly(acrylic acid) particles as doxorubicin carriers: A comparison between release behavior of physically loaded drug and conjugated drug via acid-labile hydrazone linkage.

N,N'-methylenebis(acrylamide) (MBA)-crosslinked poly(acrylic acid) (PAA) particles with low degree of cross-linking were synthesized using distillation precipitation polymerization. Size and size distribution of particles were obtained using dynamic light scattering and field emission scanning electron microscopy( and results showed that microspheres had a narrow size dispersity. Proton nuclear magnetic resonance results indicated that amount of cross-linker in structure of particles is a little more than the molar percentage of feeded MBA because of greater activity ratio of MBA than AA. pH-responsive behavior of samples was investigated using UV-vis. absorption at 480 nm where each sample showed a sudden deplete in UV absorbance at a peculiar pH. Synthesized particles were used as carriers of anti-cancer drug doxorubicin using two different approaches including physically loading of drug and drug conjugation via an acid-labile hydrazone linkage. Release results showed that in the first case, amount of released drug has an inverse relationship with the amount of cross-linker in the structure and also, by adding an acid-labile linkage, the amount of burst release decreased drastically. Also, the amount of released drug for conjugated systems was much lesser than particles with physically loaded drug. © 2017 Wiley Periodicals, Inc. J Biomed Mater Res Part A: 106A: 342-348, 2018.

Development and characterization of electrosprayed nanoparticles for encapsulation of Curcumin.

Curcumin has been proven to be an effective herbal derived anti-inflammatory and antioxidant biocompatible agent. In this research, poly(lactic-co-glycolic acid) (PLGA) (as a biocompatible and generally recognized as safe (GRAS) polymer) nanoparticles containing Curcumin were electrosprayed from different polymeric solutions with different concentrations for the first time. Morphology of these nanoparticles in the absence/presence of Curcumin was evaluated by scanning electron microscope, transmission electron microscope, and X-ray photoelectron spectroscopy analyses. Perfectly shaped nanoparticles with an average size of 300 and 320 nm were observed for neat and Curcumin-loaded PLGA, respectively. Curcumin-loaded electrosprayed nanoparticles showed a normal moderate initial burst and then a prolonged release period. Weibull, Peppas, and modified Korsmeyer-Peppas models were applied to study the kinetic and mechanism of Curcumin release from PLGA nanoparticles. Results showed high specific surface area and spherical geometry of the nanoparticles. Effectiveness of the electrospray method as a promising technique for preparing Curcumin-loaded nanoparticles was confirmed in this study. © 2017 Wiley Periodicals, Inc. J Biomed Mater Res Part A: 106A: 285-292, 2018.

Synthesis of dual thermo- and pH-sensitive poly(N-isopropylacrylamide-co-acrylic acid)-grafted cellulose nanocrystals by reversible addition-fragmentation chain transfer polymerization.

Free and cellulose nanocrystals (CNCs)-grafted block copolymers of acrylic acid and N-isopropylacrylamide with various poly(N-isopropylacrylamide) (PNIPAAm) block lengths as dual temperature- and pH-sensitive materials were synthesized by reversible addition-fragmentation chain transfer polymerization via an R-approach method. Controlling lower critical solution temperature (LCST) of the products by changing the PNIPAAm block length, addition of CNC, and variation of pH was studied. The free and CNC-grafted block copolymers were analyzed by Fourier transform infrared and proton nuclear magnetic resonance. LCST of copolymers was measured by dynamic light scattering using their hydrodynamic diameters. The block copolymers reversibly form core-corona structure with PNIPAAm as core and poly(acrylic acid) (PAA) as shell above LCST at higher pH values. LCST point shifts to higher temperatures by increasing pH and CNC content and also lowering PNIPAAm block length. By decreasing pH below 4 at certainly low temperatures, PAA becomes core and PNIPAAm forms corona. Thermal behavior of the CNC-grafted polymers was studied by thermal gravimetric analysis and differential scanning calorimetry. Morphology of the polymer-grafted CNC was examined by X-ray diffraction, scanning electron microscopy, and transmission electron microscopy. © 2017 Wiley Periodicals, Inc. J Biomed Mater Res Part A: 106A: 231-243, 2018.

Preparation of hydrophilic blood compatible polypropylene/pluronics F127 films.

In order to improve surface hydrophilicity, blood compatibility and cell-antiadhesion of polypropylene (PP) film, polypropylene oxide (PPO)-polyethylene oxide-PPO used as macromolecular surface modifier through physical blending. Surface properties of blended PP/Pluronic F127 (PF127) samples were investigated by attenuated total reflection infrared spectroscopy and water contact angle measurements. Results demonstrated that PF127 migrated to the surface. Thus, mechanical properties of blended PP/PF127 samples with the aim of the revealing the effects of the presence of modifier in the bulk were investigated through differential scanning calorimetry, X-ray diffraction, and tensile tests. The biocompatibility and hemocompatibility of modified PP films were evaluated by 3-(4,5-Dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide (MTT) assay, platelet-rich plasma, and hemolysis tests. These results showed excellent anticell and antiplatelet adhesion which deems the prepared blended films proper biomaterials. © 2017 Wiley Periodicals, Inc. J Biomed Mater Res Part A: 106A: 652-662, 2018.

Ion-exchange polymer nanofibers for enhanced osteogenic differentiation of stem cells and ectopic bone formation.

Nanofibrous scaffolds with specific modifications have shown promising potential for bone tissue engineering applications. In the present study, poly(ether sulfone) (PES) and sulfonated PES (SPES) nanofibers were fabricated via electrospinning. Calcium ions were then incorporated in SPES by immersion in a Ca(OH)2 solution. The calcium-ion-exchanged SPES (Ca-SPES), PES, and SPES nanofibers were characterized and then evaluated for their osteogenic capacity: both in vitro using stem cell culture and in vivo after subcutaneous implantation in mice. After 7 days of immersion in simulated body fluid, the formation of an apatite layer was only observed on Ca-SPES nanofibers. According to the MTT results, an increasing stem cell population was detected on all scaffolds during the period of study. Using real-time reverse transcriptase-polymerase chain reaction, alkaline phosphatase activity, and calcium content assays, it was demonstrated that the osteogenic differentiation of stem cells was higher on Ca-SPES scaffolds in comparison with PES and SPES nanofibers. Interestingly, Ca-SPES scaffolds were shown to induce ectopic bone formation after 12 weeks of subcutaneous implantation in mice. This was confirmed by mineralization and the production of collagen fibers using van Kossa and Masson's trichrome staining, respectively. Taken together, it was demonstrated that the incorporation of calcium ions into the ion-exchange nanofibrous scaffolds not only gives them the ability to enhance osteogenic differentiation of stem cells in vitro but also to induce ectopic bone formation in vivo.

Cellular infiltration on nanofibrous scaffolds using a modified electrospinning technique.

Electrospinning is currently used to fabricate nanofibrous scaffolds for tissue engineering applications. The major problem of these scaffolds is their intrinsically two-dimensional nature which inhibits cellular migration and in-growth. In this study, we have introduced a modified setup of electrospinning to produce three-dimensional nanofibrous scaffolds which allows improved infiltration of cells. An array of focused halogen light bulbs was used to localize the heat in the path of electrospun jet near the collector. The fabricated mats were then seeded with cells in order to evaluate migration and infiltration. After 14 days of culture, a homogenous distribution of cells was observed throughout the scaffolds and showed the three-dimensional architecture of nanofibrous mats. By this novel and simple setup, the prepared electrospun mats will allow the seeded cells to obtain a three-dimensional arrangement which is ideal for tissue engineering applications.

Enhanced infiltration and biomineralization of stem cells on collagen-grafted three-dimensional nanofibers.

Application of nanofibers for the purpose of tissue mimicking and regeneration has become widespread in the field of biomedicine. In this study, polyethersulfone (PES) electrospun nanofibrous membranes were fabricated, modified, and loaded with unrestricted somatic stem cells (USSC) to mimic the natural structure of bone. Untreated PES, plasma-treated PES, and collagen-grafted PES (COL-PES) nanofibers were characterized via Brunauer-Emmett-Teller method, attenuated total reflection Fourier transform infrared, contact angle measurements, and scanning electron microscopy. Their capacity to support proliferation, infiltration, and osteogenic differentiation of USSC was investigated using MTT assay, real-time reverse transcriptase-polymerase chain reaction, histologic staining, alkaline phosphatase activity, and calcium content assay. All the scaffolds had nanofibrous and highly porous structure with large surface area. After surface treatments, hydrophilicity of scaffolds increased intensively and their biocompatibility improved. During osteogenic differentiation of stem cells, alkaline phosphatase activity and calcium content exhibited the highest level in cells on COL-PES. Real-time reverse transcriptase-polymerase chain reaction showed significant difference between the expression levels of osteoblast-related genes on COL-PES compared to other scaffolds. Excellent infiltration of USSC was observed in nanofibrous membranes especially COL-PES. It can be concluded that COL-PES nanofibrous scaffold has potential for bone grafting because of its three-dimensional structure and bioactivity which enhance proliferation, differentiation, and infiltration of USSC.