Chromophores' Contribution to Color Changes of Thermally Modified Tropical Wood Species.

This work examines the effect of thermal modification temperature (180, 200, and 220 °C) in comparison with reference (untreated) samples on selected optical properties of six tropical wood species-Sp. cedar (Cedrala odorata), iroko (Chlorophora excelsa), merbau (Intsia spp.), meranti (Shorea spp.), padouk (Pterocarpus soyauxii), and teak (Tectona grandis). The main goal is to expand the existing knowledge in the field of wood thermal modification by understanding the related degradation mechanisms associated with the formation of chromophoric structures and, above all, to focus on the change in the content of extractive substances. For solid wood, the CIELAB color space parameters (L*, a*, b*, and ΔE*), yellowness (Y), ISO brightness, and UV-Vis diffuse reflectance spectra were obtained. Subsequently, these wood samples were extracted into three individual solvents (acetone, ethanol, and ethanol-toluene). The yields of the extracted compounds, their absorption spectra, and again L*, a*, b*, ΔE*, and Yi parameters were determined. With increasing temperatures, the samples lose brightness and darken, while their total color difference grows (except merbau). The highest yield of extractives (mainly phenolic compounds, glycosides, and dyes) from thermally modified samples was usually obtained using ethanol. New types of extractives (e.g., 2-furaldehyde, lactones, formic acid, some monomer derivatives of phenols, etc.) are already created around a temperature of 180 °C and may undergo condensation reactions at higher temperatures. For padouk, merbau, teak, and partially iroko modified at temperatures of 200 and 220 °C, there was a detected similarity in the intensities of their UV-Vis DR spectra at the wavelength regions corresponding to phenolic aldehydes, unsaturated ketones, quinones, stilbenes, and other conjugated carbonyl structures. Overall, a statistical assessment using PCA sorted the samples into five clusters. Cluster 3 consists of almost all samples modified at 200 and 220 °C, and in the other four, the reference and thermally modified samples at 180 °C were distributed. The yellowness of wood (Y) has a very high dependence (r = 0.972) on its brightness (L*) and the yellowness index of the extractives in acetone Yi(Ac), whose relationship was described by the equation Y = -0.0951 × Y(Ac) + 23.3485.

Application of Alkali Lignin and Spruce Sawdust for the Effective Removal of Reactive Dyes from Model Wastewater.

Today, the emphasis is on environmentally friendly materials. Alkali lignin and spruce sawdust are suitable natural alternatives for removing dyes from wastewater. The main reason for using alkaline lignin as a sorbent is the recovery of waste black liquor from the paper industry. This work deals with removing dyes from wastewater using spruce sawdust and lignin at two different temperatures. The decolorization yields were calculated as the final values. Increasing the temperature during adsorption leads to higher decolorization yields, which may be due to the fact that some substances react only at elevated temperatures. The results of this research are useful for the treatment of industrial wastewater in paper mills, and the waste black liquor (alkaline lignin) can be used as a biosorbent.

Paper-Based Laminates Impregnated with a Hybrid Lignin-Phenol-Formaldehyde Resin.

In this study, high-pressure laminates (HPL) impregnated with phenol-formaldehyde (PF) resins enriched with kraft lignin were developed. Pulverised kraft lignin was added to the commercial PF resin in the amounts of 1% and 5% (solid to solid). Laminates were manufactured using pressure impregnation of the resins into the papers and using hot pressing of HPL in a laboratory press. Laminates with a lignin content of 1% (L-LPF-1) showed the highest bending strength (72.42 MPa) and Brinell hardness (9.41); they also exhibited the best moisture uptake (9.61) and thickness swelling after immersion in water (3.32%). Except for impact bending, laminates with a lignin content of 5% (L-LPF-5) had worse properties. However, the differences between the variants are mostly not statistically significant and are comparable with the results of commercial PF resin. Scanning electron microscopy confirmed the homogenous structure of produced laminates and the occurrence of cohesive failures in ruptured L-LPF-1 laminates, whereas in ruptured L-LPF-5 laminates adhesive failures were also observed. Based on the conducted research it can be said that the utilisation of kraft lignin as an additive to PF resin (in the amount of 1%) has a positive effect on the produced HPL.

Acute pharmacological profile of 2C-B-Fly-NBOMe in male Wistar rats-pharmacokinetics, effects on behaviour and thermoregulation.

Introduction: N-2-methoxy-benzylated ("NBOMe") analogues of phenethylamine are a group of new psychoactive substances (NPS) with reported strong psychedelic effects in sub-milligram doses linked to a number of severe intoxications, including fatal ones. In our present work, we provide a detailed investigation of pharmacokinetics and acute behavioural effects of 2C-B-Fly-NBOMe (2-(8-bromo-2,3,6,7-tetrahydrobenzo [1,2-b:4,5-b']difuran-4-yl)-N-[(2-methoxybenzyl]ethan-1-amine), an analogue of popular psychedelic entactogen 2C-B (4-Bromo-2,5-dimethoxyphenethylamine). Methods: All experiments were conducted on adult male Wistar rats. Pharmacokinetic parameters of 2C-B-Fly-NBOMe (1 mg/kg subcutaneously; s. c.) in blood serum and brain tissue were analysed over 24 h using liquid chromatography-mass spectrometry (LC/MS). For examination of behavioural parameters in open field test (OFT) and prepulse inhibition (PPI) of acoustic startle reaction (ASR), 2C-B-Fly-NBOMe (0.2, 1 and 5 mg/kg s. c.) was administered in two temporal onsets: 15 and 60 min after administration. Thermoregulatory changes were evaluated in individually and group-housed animals over 8 h following the highest dose used in behavioural experiments (5 mg/kg s. c.). Results: Peak drug concentrations were detected 30 and 60 min after the drug application in serum (28 ng/ml) and brain tissue (171 ng/g), respectively. The parental compound was still present in the brain 8 h after administration. Locomotor activity was dose-dependently reduced by the drug in both temporal testing onsets. ASR was also strongly disrupted in both temporal onsets, drug's effect on PPI was weaker. 2C-B-Fly-NBOMe did not cause any significant thermoregulatory changes. Discussion: Our results suggest that 2C-B-Fly-NBOMe penetrates animal brain tissue in a relatively slow manner, induces significant inhibitory effects on motor performance, and attenuates sensorimotor gating. Its overall profile is similar to closely related analogue 2C-B and other NBOMe substances.

Chemical pulp from corn stalks.

This work aimed to carry out chemical cooking of corn stalks, both in a nitrate-alkaline manner and in a soda pulp method. The composition of corn is characterized by cellulose, lignin, ash, and substances extractable into polar and organic solvents. Handsheets were made from the pulp, for which the degree of polymerization, sedimentation rate, and strength properties was determined.

Evaluation of Selected Cellulose Macromolecular Properties after Its Chemical Treatment Using Size Exclusion Chromatography.

This work evaluates the effect of using selected inorganic chemicals as the main components of waterborne wood preservative systems on the degradation of the cellulose constituent in wood from model samples. The polymeric properties of cellulose and the homogeneity of the degradation process primarily reflect very well the degree of cellulose deterioration. Whatman papers, as pure cellulose model samples, were impregnated with 10 different 5 wt% solutions of inorganic salts and distilled water and consequently subjected to wet-thermal accelerated aging (T = 85 °C, RH = 65%, for 30 days). The samples were then derivatized to cellulose tricarbanilates (CTCs) through two different procedures (by precipitation in a methanol-water mixture/by evaporation of pyridine from the reaction mixture) and finally analyzed using size exclusion chromatography (SEC). Chemically treated and aged cellulose samples showed different changes in the degree of polymerization (DP) and polydispersity (PD) in terms of untreated non-aged standard caused by different ongoing degradation reactions, such as dehydration, hydrolysis, oxidation, and crosslinking. In general, the lowest degradation rate after treatment by chemicals and after accelerated aging was observed in samples treated by borates, NaCl, and ZnSO4·7H2O. The greatest depolymerization after treatment and after accelerated aging was caused by sulphates containing NH4+, Cu2+, and Fe3+ cations, with aging by NH4Cl and (NH4)2HPO4-treated samples also leading to significant depolymerization. The higher DP values are linked to the precipitated method of CTC preparation, though not for chlorides and phosphates. PD is also generally higher in precipitated and aged samples and is heavily influenced by the presence of low molecular weight products. This paper brings new insights regarding the complex evaluation of the polymeric properties of degraded cellulose by considering all important factors affecting the sample and the analysis itself through the use of statistics. From the statistical point of view, the influences of all factors (solution, aging, method) and their interactions (except aging*method) on DP are statistically significant. The influence of the sample processing method used for analysis of the desired results becomes important mainly in practice. This work recommends the evaporation method for more accurate description of more degraded cellulose.

Effect of a Nanocellulose Addition on the Mechanical Properties of Paper.

Nowadays, the emphasis is on increasing the durability of all products. For this reason, it is also advisable to look into extending the durability of paper products. The main reason for using flax pulp is that flax and cotton pulp are widely used for the production of banknotes due to their higher strength. This paper deals with flax pulp with the addition of nanocellulose, which should further enhance the mechanical properties of the pulp. The tensile strength, breaking length, and tensile energy absorption index were evaluated as the key mechanical properties. At the same time, the effect of the addition of nanocellulose, whether it was added to the pulp mass or applied to the later produced paper as a spray or coating, was tested in comparison to paper without the addition of nanocellulose. The best mechanical properties, i.e., tensile strength, were achieved for the highest addition of 5% of nanocellulose into the pulp, at 24.3 Nm∙g-1, and for the coating application, at 28.7 Nm∙g-1, compared to the flax pulp without the addition, where the tensile strength was 20.5 Nm∙g-1. The results of this research are used for the assessment of nanocellulose as a natural compatible additive to enhance the strength properties of cellulose-based materials.

Degradation of Chemical Components of Thermally Modified Robinia pseudoacacia L. Wood and Its Effect on the Change in Mechanical Properties.

Currently, emphasis is placed on using environmentally friendly materials both from a structural point of view and the application of protective means. For this reason, it is advisable to deal with the thermal modification of wood, which does not require the application of protective substances, to increase its service life. The main reason for the thermal modification of black locust is that although black locust grows abundantly in our country, it has no industrial use. It is mainly used outdoors, where thermal modification could increase its resistance. This article deals with the thermal modification of black locust wood (Robinia pseudoacacia L.) and the impact of this modification on the chemical components of the wood with an overlap in the change in mechanical properties compared to untreated wood. Static (LOP, MOR, and MOE) and dynamic (IBS) bending properties were evaluated as representative mechanical properties. At the same time, the impact of thermal modification on the representation of chemical components of wood (cellulose, lignin, hemicellulose) was also tested. As a result of the heat treatment, the mechanical properties gradually decreased as the temperature increased. The highest decrease in mechanical values found at 210 °C was 43.7% for LOP and 45.1% for MOR. Thermal modification caused a decrease in the content of wood polysaccharides (the decrease in hemicelluloses content was 33.2% and the drop in cellulose was about 29.9% in samples treated at 210 °C), but the relative amount of lignin in the wood subjected to increased temperature was higher due to autocondensation, and mainly because of polysaccharide loss. Based on the correlations between chemical and mechanical changes caused by thermal modification, it is possible to observe the effects of reducing the proportions of chemical components and changes in their characteristic properties (DP, TCI) on the reduction in mechanical properties. The results of this research serve to better understand the behavior of black locust wood during thermal modification, which can primarily be used to increase its application use.

Extensive Collection of Psychotropic Mushrooms with Determination of Their Tryptamine Alkaloids.

Since not only psilocybin (PSB) but also PSB-containing mushrooms are used for psychedelic therapy and microdosing, it is necessary to know their concentration variability in wild-grown mushrooms. This article aimed to determine the PSB, psilocin (PS), baeocystin (BA), norbaeocystin (NB), and aeruginascin (AE) concentrations in a large sample set of mushrooms belonging to genera previously reported to contain psychotropic tryptamines. Ultra-high performance liquid chromatography coupled with tandem mass spectrometry was used to quantify tryptamine alkaloids in the mushroom samples. Most mushroom collections were documented by fungarium specimens and/or ITS rDNA/LSU/EF1-α sequencing. Concentrations of five tryptamine alkaloids were determined in a large sample set of 226 fruiting bodies of 82 individual collections from seven mushroom genera. For many mushroom species, concentrations of BA, NB, and AE are reported for the first time. The highest PSB/PS concentrations were found in Psilocybe species, but no tryptamines were detected in the P. fuscofulva and P. fimetaria collections. The tryptamine concentrations in mushrooms are extremely variable, representing a problem for mushroom consumers due to the apparent risk of overdose. The varied cocktail of tryptamines in wild mushrooms could influence the medicinal effect compared to therapy with chemically pure PSB, posing a serious problem for data interpretation.

Psilocybin-Mediated Attenuation of Gamma Band Auditory Steady-State Responses (ASSR) Is Driven by the Intensity of Cognitive and Emotional Domains of Psychedelic Experience.

Psilocybin is a classical serotoninergic psychedelic that induces cognitive disruptions similar to psychosis. Gamma activity is affected in psychosis and is tightly related to cognitive processing. The 40 Hz auditory steady-state responses (ASSR) are frequently used as indicators to test the ability to generate gamma activity. Based on previous literature, we studied the impact of psilocybin on 40 Hz ASSR in healthy volunteers. The study was double blind and placebo controlled with a crossover design. A sample of 20 healthy subjects (10M/10F) received psilocybin orally 0.26 mg/kg or placebo. Participants were measured four times in total, one time before ingestion of psilocybin/placebo and one time after ingestion, during the peak of intoxication. A series of 500 ms click trains were used for stimulation. Psilocybin induced a psychedelic effect and decreased 40 Hz ASSR phase-locking index compared to placebo. The extent of the attenuation was related to Cognition and Affect on the Hallucinogen Rating Scale. The current study shows that psilocybin lowers the synchronization level and the amplitude of 40 Hz auditory steady-state responses, which yields further support for the role of gamma oscillations in cognitive processing and its disturbance.

Effects of psilocybin microdosing on awe and aesthetic experiences: a preregistered field and lab-based study.

There is an increased societal trend to engage in microdosing, in which small sub-hallucinogenic amounts of psychedelics are consumed on a regular basis. Following subjective reports that microdosing enhances the experience of nature and art, in the present study we set out to study the effects of psilocybin microdosing on feelings of awe and art perception. In this preregistered combined field- and lab-based study, participants took part in a microdosing workshop after which they volunteered to self-administer a psilocybin microdose or a placebo for three consecutive weeks, while the condition was kept blind to the participants and researchers. Following a 2-week break, the condition assignment was reversed. During each block, participants visited the lab twice to measure the effects of psilocybin microdosing vs. placebo. We used standardized measures of awe, in which participants reported their experiences in response to short videos or when viewing abstract artworks from different painters. Our confirmatory analyses showed that participants felt more awe in response to videos representing funny animals and moving objects in the microdosing compared to the placebo condition. However, about two-third of our participants were breaking blind to their experimental condition. Our exploratory findings suggest that expectancy-effects may be a driving factor underlying the subjective benefits of microdosing.

Pharmacokinetic, pharmacodynamic, and behavioural studies of deschloroketamine in Wistar rats.

BACKGROUND AND PURPOSE: Deschloroketamine (DCK), a structural analogue of ketamine, has recently emerged on the illicit drug market as a recreational drug with a modestly long duration of action. Despite it being widely used by recreational users, no systematic research on its effects has been performed to date. EXPERIMENTAL APPROACH: Pharmacokinetics, acute effects, and addictive potential in a series of behavioural tests in Wistar rats were performed following subcutaneous (s.c.) administration of DCK (5, 10, and 30 mg·kg-1 ) and its enantiomers S-DCK (10 mg·kg-1 ) and R-DCK (10 mg·kg-1 ). Additionally, activity at human N-methyl-d-aspartate (NMDA) receptors was also evaluated. KEY RESULTS: DCK rapidly crossed the blood brain barrier, with maximum brain levels achieved at 30 min and remaining high at 2 h after administration. Its antagonist activity at NMDA receptors is comparable to that of ketamine with S-DCK being more potent. DCK had stimulatory effects on locomotion, induced place preference, and robustly disrupted PPI. Locomotor stimulant effects tended to disappear more quickly than disruptive effects on PPI. S-DCK had more pronounced stimulatory properties than its R-enantiomer. However, the potency in disrupting PPI was comparable in both enantiomers. CONCLUSION AND IMPLICATIONS: DCK showed similar behavioural and addictive profiles and pharmacodynamics to ketamine, with S-DCK being in general more active. It has a slightly slower pharmacokinetic profile than ketamine, which is consistent with its reported longer duration of action. These findings have implications and significance for understanding the risks associated with illicit use of DCK.

Psilocybin microdosing does not affect emotion-related symptoms and processing: A preregistered field and lab-based study.

BACKGROUND: Microdoses of psychedelics (i.e. a sub-hallucinogenic dose taken every third day) can reduce symptoms of depression, anxiety and stress according to anecdotal reports and observational studies. Research with medium to high doses of psilocybin points towards potential underlying mechanisms, including the modulation of emotion and interoceptive processing. AIMS: In this preregistered study, we investigated whether psilocybin microdoses alter self-reported interoceptive awareness and whether repeated microdosing over 3 weeks modulates emotion processing and reduces symptoms of anxiety and depression. METHODS: We used a double-blind, placebo-controlled, within-subject crossover design. Participants completed the Multidimensional Assessment of Interoceptive Awareness Questionnaire 1½ h after self-administering their second dose (or placebo), and the emotional go/no-go task and the shortened Depression Anxiety Stress Scale 1½ h after self-administering their seventh dose. RESULTS: Our confirmatory analyses revealed that psilocybin microdosing did not affect emotion processing or symptoms of anxiety and depression compared with placebo. Our exploratory analyses revealed that psilocybin microdosing did not affect self-reported interoceptive awareness, that symptoms of depression and stress were significantly reduced in the first block compared with baseline, that participants broke blind in the second block and that there was no effect of expectations. Further research in a substance-naïve population with clinical range anxiety and depressive symptoms is needed to substantiate the potential beneficial effects of microdosing.

2C-B-Fly-NBOMe Metabolites in Rat Urine, Human Liver Microsomes and C. elegans: Confirmation with Synthesized Analytical Standards.

Compounds from the N-benzylphenethylamine (NBPEA) class of novel psychoactive substances are being increasingly utilized in neurobiological and clinical research, as diagnostic tools, or for recreational purposes. To understand the pharmacology, safety, or potential toxicity of these substances, elucidating their metabolic fate is therefore of the utmost interest. Several studies on NBPEA metabolism have emerged, but scarce information about substances with a tetrahydrobenzodifuran ("Fly") moiety is available. Here, we investigated the metabolism of 2-(8-bromo-2,3,6,7-tetrahydrobenzo[1,2-b:4,5-b']difuran-4-yl)-N-(2-methoxybenzyl)ethan-1-amine (2C-B-Fly-NBOMe) in three different systems: isolated human liver microsomes, Cunninghamella elegans mycelium, and in rats in vivo. Phase I and II metabolites of 2C-B-Fly-NBOMe were first detected in an untargeted screening and identified by liquid chromatography-tandem mass spectrometry (LC-MS/MS). Several hypothesized metabolites were then synthesized as reference standards; knowledge of their fragmentation patterns was utilized for confirmation or tentative identification of isomers. Altogether, thirty-five phase I and nine phase II 2C-B-Fly-NBOMe metabolites were detected. Major detected metabolic pathways were mono- and poly-hydroxylation, O-demethylation, oxidative debromination, and to a lesser extent also N-demethoxybenzylation, followed by glucuronidation and/or N-acetylation. Differences were observed for the three used media. The highest number of metabolites and at highest concentration were found in human liver microsomes. In vivo metabolites detected from rat urine included two poly-hydroxylated metabolites found only in this media. Mycelium matrix contained several dehydrogenated, N-oxygenated, and dibrominated metabolites.

Nitrate-Alkaline Pulp from Non-Wood Plants.

Because there is a lack of wood resources in many countries, this work focused on pulp and paper production from the waste and agricultural residues of non-wood plants. The work aimed to pulp the nitrate-alkaline of black mustard (Brassica Nigra L.) and camelina (Camelina Sativa L.). The black mustard and the camelina were selected due to the expanding planted areas of these crops in the Czech Republic. To characterize the chemical composition of black mustard and camelina, cellulose, lignin, ash, and extractives were determined. Raw alpha-cellulose, beta-cellulose, and gamma-cellulose were also measured. The results showed that the content of lignin in non-wood plants is lower than that in softwoods. The cooked pulp was characterized by the delignification degree-Kappa number. Additionally, handsheet papers were made for selected samples of pulp. The handsheet papers were characterized by tensile index, breaking length, and smoothness and compared with commonly available papers.

Stability of psilocybin and its four analogs in the biomass of the psychotropic mushroom Psilocybe cubensis.

Psilocybin, psilocin, baeocystin, norbaeocystin, and aeruginascin are tryptamines structurally similar to the neurotransmitter serotonin. Psilocybin and its pharmacologically active metabolite psilocin in particular are known for their psychoactive effects. These substances typically occur in most species of the genus Psilocybe (Fungi, Strophariaceae). Even the sclerotia of some of these fungi known as "magic truffles" are of growing interest in microdosing due to them improving cognitive function studies. In addition to microdosing studies, psilocybin has also been applied in clinical studies, but only its pure form has been administrated so far. Moreover, the determination of tryptamine alkaloids is used in forensic analysis. In this study, freshly cultivated fruit bodies of Psilocybe cubensis were used for monitoring stability (including storage and processing conditions of fruiting bodies). Furthermore, mycelium and the individual parts of the fruiting bodies (caps, stipes, and basidiospores) were also examined. The concentration of tryptamines in final extracts was analyzed using ultra-high-performance liquid chromatography coupled with mass spectrometry. No tryptamines were detected in the basidiospores, and only psilocin was present at 0.47 wt.% in the mycelium. The stipes contained approximately half the amount of tryptamine alkaloids (0.52 wt.%) than the caps (1.03 wt.%); however, these results were not statistically significant, as the concentration of tryptamines in individual fruiting bodies is highly variable. The storage conditions showed that the highest degradation of tryptamines was seen in fresh mushrooms stored at -80°C, and the lowest decay was seen in dried biomass stored in the dark at room temperature.

Combination of UV and MS/MS detection for the LC analysis of cannabidiol-rich products.

Cannabidiol (CBD), a major non-psychoactive cannabinoid, has received a lot of attention due to its potential anti-inflammatory, pain-relieving, and anti-anxiety properties. This has led to a recent boom in CBD-rich commercial products, which are sold without prescription in the form of oils, candies, and cosmetics. Since these products are derived from cannabis, the presence of the psychoactive tetrahydrocannabinol (THC) has to be tested before they enter the market. Here, we present a high-throughput approach based on liquid chromatography coupled to UV and tandem mass spectrometric detection for the determination of CBD, THC, and six other minor cannabinoids (cannabigerolic acid, cannabidivarin, cannabinol, cannabigerol, cannabidiolic acid, and tetrahydrocannabinolic acid) in a wide range of concentrations and in a variety of matrices, including oils, hydrophobic ointments, water-soluble liquids, plant material and gelatinous gummies. Each product was dissolved in a suitable solvent and further diluted to avoid matrix interference. The diluted samples were analyzed by reversed-phase chromatography, coupled to a UV detector followed by a triple quadrupole mass spectrometer, used in the multiple reaction monitoring mode. The UV signal was utilized for the quantification of samples containing high levels of CBD, while the mass spectrometer was used for low levels of THC and other minor cannabinoids. This allowed us to meet the required sensitivity for THC while significantly expanding the range of analyzed CBD, all within an 8-min long chromatographic run. The samples were further quantified using calibration in solvent, the approach was validated, and the validation criteria were met for all matrices except for two (i.e., emulsions and gels). The lower limit of quantification for THC was 0.5 µg/g in gummies, 1.0 µg/g in oils, ointments and liquids, and 5.0 µg/g in plant material. CBD was analyzed in the range of 0.5-60,000 µg/g in gummies, 1-120,000 µg/g in oils, ointments and liquids, and 5-300,000 µg/g in plant material. The developed method was used for the analysis of thirteen real products with a wide range of CBD content, with positive THC findings in twelve of them.

Synthesis and identification of deschloroketamine metabolites in rats' urine and a quantification method for deschloroketamine and metabolites in rats' serum and brain tissue using liquid chromatography tandem mass spectrometry.

Deschloroketamine (2-(methylamino)-2-phenyl-cyclohexanone) is a ketamine analog belonging to a group of dissociative anesthetics, which have been distributed within the illicit market since 2015. However, it was also being sold as 'ketamine' misleading people to believe that they were getting genuine ketamine. Dissociative anesthetics have also come to the attention of the psychiatric field due to their potential properties in the treatment of depression. At present, there is a dearth of information on deschloroketamine related to its metabolism, biodistribution, and its mechanism of action. We have therefore carried out a metabolomics study for deschloroketamine via non-targeted screening of urine samples employing liquid chromatography combined with high-resolution mass spectrometry. We developed and validated a multiple reaction monitoring method using a triple quadrupole instrument to track metabolites of deschloroketamine. Furthermore, significant metabolites of deschloroketamine, (trans-dihydrodeschloroketamine, cis- and trans-dihydronordeschloroketamine, and nordeschloroketamine), were synthesized in-house. The prepared standards were utilized in the developed multiple reaction monitoring method. The quantification method for serum samples provided intra-day accuracy ranging from 86% to 112% with precision of 3% on average. The concentrations of cis/trans-dihydronordeschloroketamines and trans-dihydrodeschloroketamine were lower than 10 ng/mL, nordeschloroketamine and deschloroketamine ranged from 0.5 to 860 ng/mL in real samples. The quantification method for brain tissue provided intra-day accuracy ranging from 80% to 125% with precision of 7% on average. The concentrations of cis/trans-dihydronordeschloroketamines and trans-dihydrodeschloroketamine ranged from 0.5 to 70 ng/g, nordeschloroketamine and deschloroketamine varied from 0.5 to 4700 ng/g in real samples.

Behavioral and Pharmacokinetic Profile of Indole-Derived Synthetic Cannabinoids JWH-073 and JWH-210 as Compared to the Phytocannabinoid Δ9-THC in Rats.

Synthetic cannabinoid compounds are marketed as "legal" marijuana substitutes, even though little is known about their behavioral effects in relation to their pharmacokinetic profiles. Therefore, in the present study we assessed the behavioral effects of systemic treatment with the two synthetic cannabinoids JWH-073 and JWH-210 and the phytocannabinoid Δ9-THC on locomotor activity, anxiety-like phenotype (in the open field) and sensorimotor gating (measured as prepulse inhibition of the acoustic startle response, PPI), in relation to cannabinoid serum levels. Wistar rats were injected subcutaneously (sc.) with JWH-073 (0.1, 0.5, or 5 mg/kg), JWH-210 (0.1, 0.5, or 5 mg/kg), Δ9-THC (1 or 3 mg/kg) or vehicle (oleum helanti) in a volume of 0.5 ml/kg and tested in the open field and PPI. Although JWH-073, JWH-210, Δ9-THC (and its metabolites) were confirmed in serum, effects on sensorimotor gating were absent, and locomotor activity was only partially affected. Δ9-THC (3 mg/kg) elicited an anxiolytic-like effect as suggested by the increased time spent in the center of the open field (p < 0.05). Our results further support the potential anxiolytic-like effect of pharmacological modulation of the endocannabinoid system.