Hierarchically Porous Ferroelectric Layer with the Aligned Dipole Moment for a High-Performance Aqueous Zn Metal Battery.

Rechargeable aqueous Zn metal batteries (AZMBs) are desirable because of the advantages of metallic Zn and aqueous media. However, AZMBs suffer from limited cyclability and low Coulombic efficiency, originating from uncontrolled dendrite growth and side reactions such as hydrogen gas evolution and corrosion. A hierarchically porous poly(vinylidene difluoride) (PVDF) protection layer with ferroelectric ß-phases is formed on the Zn metal using a simple electrospinning method. This suppresses Zn metal failure modes such as side reactions and dendrite growth and supports rapid electrolyte accessibility. The synergetic effect of hierarchically porous structures and ferroelectricity not only facilitates a supporting matrix to form uniform nucleation sites for Zn deposition but also inhibits corrosion, allowing dendrite-free Zn deposition. This multifunctional PVDF film significantly improves the cyclability of Zn symmetric cells, allowing for up to 850 h of repeated plating/stripping cycles. Moreover, it exhibits an excellent cycle life of 1000 cycles under harsh conditions and high current densities of 4.0-10.0 mA cm-2, which are 62-fold higher than those that the bare Zn electrode tolerates.

Permeable characteristics of surface film deposited on LiMn2O4 positive electrode revealed by redox-active indicator.

Herein, the ferrocene redox indicator-based surface film characteristics of spinel lithium manganese oxide (LMO) were evaluated. The pre-cycling of spinel LMO generated a film on the LMO surface. The surface film deposited on LMO surface suppresses further electrolyte decomposition, while the penetration of approximately 0.7 nm-sized redox indicator is not prevented. The facile self-discharge of LMO and regeneration current from the ferrocenium molecule was observed from the redox indicator in a specifically designed four-electrode cell. From this electrochemical behavior, a small-sized HF molecule attack on the LMO surface through a carbonate-based electrolyte-derived film is defined; hence, the prevention of small-sized molecules into the deposited surface film is crucial for the enhancement of LiMn2O4-based lithium-ion batteries.