Bimetallic Au and Pd Nanoparticles Modified WO3 Nanosheets for Enhancing the Sensitivity and Selectivity of Formaldehyde Assessment in Aquatic Products.

Formaldehyde, a common illegal additive in aquatic products, poses a threat to people's health and lives. In this study, a novel metal oxide semiconductor gas sensor based on AuPd-modified WO3 nanosheets (NSs) had been developed for the highly efficient detection of formaldehyde. WO3 NS modified with 2.0% AuPd nanoparticles showed a higher response (Ra/Rg = 94.2) to 50 ppm of formaldehyde at 210 °C, which was 36 times more than the pristine WO3 NS. In addition, the AuPd/WO3 gas sensor had a relatively short response/recovery time of 10 s/9 s for 50 ppm of formaldehyde at 210 °C, with good immunity to other interfering gases and good stability for formaldehyde. The excellent gas-sensitive performance was attributed to the chemical sensitization of Au, the electronic sensitization of Pd, and the synergistic effect of bimetallic AuPd, which facilitated the recognition and response of formaldehyde molecules. Additionally, the high sensitivity and broad application prospect of the 2.0% AuPd/WO3 NS composite-based sensor in real sample detection were also confirmed by using the above sensor for the detection of formaldehyde in aquatic products such as squid and shrimp.

Alkaloid Precipitant Reaction Inspired Controllable Synthesis of Mesoporous Tungsten Oxide Spheres for Biomarker Sensing.

Highly porous sensitive materials with well-defined structures and morphologies are extremely desirable for developing high-performance chemiresistive gas sensors. Herein, inspired by the classical alkaloid precipitant reaction, a robust and reliable active mesoporous nitrogen polymer sphere-directed synthesis method was demonstrated for the controllable construction of heteroatom-doped mesoporous tungsten oxide spheres. In the typical synthesis, P-doped mesoporous WO3 monodisperse spheres with radially oriented channels (P-mWO3-R) were obtained with a diameter of ∼180 nm, high specific surface area, and crystalline skeleton. The in situ-introduced P atoms could effectively adjust the coordination environment of W atoms (Wδ+-Ov), giving rise to dramatically enhanced active surface-adsorbed oxygen species and unusual metastable ε-WO3 crystallites. The P-mWO3-R spheres were applied for the sensing of 3-hydroxy-2-butanone (3H2B), a biomarker of foodborne pathogenic bacteria Listeria monocytogenes (LM). The sensor exhibited high sensitivity (Ra/Rg = 29 to 3 ppm), fast response dynamics (26/7 s), outstanding selectivity, and good long-term stability. Furthermore, the device was integrated into a wireless sensing module to realize remote real-time and precise detection of LM in practical applications, making it possible to evaluate food quality using gas sensors conveniently.

Enhanced Response for Foodborne Pathogens Detection by Au Nanoparticles Decorated ZnO Nanosheets Gas Sensor.

Listeria monocytogenes is a hazardous foodborne pathogen that is able to cause acute meningitis, encephalitis, and sepsis to humans. The efficient detection of 3-hydroxy-2-butanone, which has been verified as a biomarker for the exhalation of Listeria monocytogenes, can feasibly evaluate whether the bacteria are contained in food. Herein, we developed an outstanding 3-hydroxy-2-butanone gas sensor based on the microelectromechanical systems using Au/ZnO NS as a sensing material. In this work, ZnO nanosheets were synthesized by a hydrothermal reaction, and Au nanoparticles (~5.5 nm) were prepared via an oleylamine reduction method. Then, an ultrasonic treatment was carried out to modified Au nanoparticles onto ZnO nanosheets. The XRD, BET, TEM, and XPS were used to characterize their morphology, microstructure, catalytic structure, specific surface area, and chemical composition. The response of the 1.0% Au/ZnO NS sensors vs. 25 ppm 3-hydroxy-2-butanone was up to 174.04 at 230 °C. Moreover, these sensors presented fast response/recovery time (6 s/7 s), great selectivity, and an outstanding limit of detection (lower than 0.5 ppm). This work is full of promise for developing a nondestructive, rapid and practical sensor, which would improve Listeria monocytogenes evaluation in foods.

Minimal Active Space for Diradicals Using Multistate Density Functional Theory.

This work explores the electronic structure as well as the reactivity of singlet diradicals, making use of multistate density functional theory (MSDFT). In particular, we show that a minimal active space of two electrons in two orbitals is adequate to treat the relative energies of the singlet and triplet adiabatic ground state as well as the first singlet excited state in many cases. This is plausible because dynamic correlation is included in the first place in the optimization of orbitals in each determinant state via block-localized Kohn-Sham density functional theory. In addition, molecular fragment, i.e., block-localized Kohn-Sham orbitals, are optimized separately for each determinant, providing a variational diabatic representation of valence bond-like states, which are subsequently used in nonorthogonal state interactions (NOSIs). The computational procedure and its performance are illustrated on some prototypical diradical species. It is shown that NOSI calculations in MSDFT can be used to model bond dissociation and hydrogen-atom transfer reactions, employing a minimal number of configuration state functions as the basis states. For p- and s-types of diradicals, the closed-shell diradicals are found to be more reactive than the open-shell ones due to a larger diabatic coupling with the final product state. Such a diabatic representation may be useful to define reaction coordinates for electron transfer, proton transfer and coupled electron and proton transfer reactions in condensed-phase simulations.

Variational Energy Decomposition Analysis of Charge-Transfer Interactions between Metals and Ligands in Carbonyl Complexes.

Variational energy decomposition analyses have been presented to quantify the σ-dative, ligand-to-metal forward charge transfer (CT) and the π-conjugative, metal-to-ligand backward charge delocalization on a series of isolelectronic transition-metal carbonyl complexes M(CO)6, including M = Ti2-, V-, Cr, Mn+, and Fe2+. Although the qualitative features of these energy terms are understood, well-defined quantitative studies have been scarce. Consistent with early findings, electrostatic and Pauli exchange effects play a key role in σ-donation, resulting in blue shifts in ligand vibrational frequency in the complex geometries. Excluding chemical bonding interactions between the CO ligand and the metal fragments in the energy decomposition analysis, we found that loosely bound electrostatic complexes can be formed at a longer metal-to-ligand distance due to the exponential decay of Pauli exchange. In all complexes, the overall binding stabilization can be attributed to CT effects, with opposing trends between σ-donation and π-back bonding that follows an order of Ti2- (4.4) > V1- (2.6) > Cr (1.5) > Mn1+ (1.1) > Fe2+ (0.5) in π-to-σ CT ratio. These electronic and energetic features are mirrored in the vibrational frequency shifts induced by different factors. The present investigation may help stimulate the use of energy decomposition techniques to understand the structure and activity of metallocatalysts using density functional theory.