The Physiological Response of Apricot Flowers to Low-Temperature Stress.

The growth and development of apricot flower organs are severely impacted by spring frosts. To better understand this process, apricot flowers were exposed to temperatures ranging from 0 °C to -8 °C, including a control at 18 °C, in artificial incubators to mimic diverse low-temperature environments. We aimed to examine their physiological reactions to cold stress, with an emphasis on changes in phenotype, membrane stability, osmotic substance levels, and antioxidant enzyme performance. Results reveal that cold stress induces significant browning and cellular damage, with a sharp increase in browning rate and membrane permeability below -5 °C. Soluble sugars and proteins initially rise as osmoprotectants, but their content decreases at lower temperatures. Proline content consistently increases, suggesting a protective role. Antioxidant enzyme activities, including catalase (CAT), peroxidase (POD), superoxide dismutase (SOD), and ascorbate peroxidase (APX), exhibit a complex pattern, with initial increases followed by declines at more severe cold conditions. Correlation and principal component analyses highlight the interplay between these responses, indicating a multifaceted adaptation strategy. The findings contribute to the understanding of apricot cold tolerance and inform breeding efforts for improved crop resilience.

Research on the destroy characteristics of PTFE/Cu composite liner to explosive reactive armor.

The jet generated through PTFE based inert material liner has the characteristics of low energy, low density, and large aspect ratio, which can effectively achieve the "penetration without explosion" of explosive reactive armor. PTFE/Cu composite material liner with various densities is prepared, to research the roles of preparation procedure and density in the destroy effect of jet on reactive armor. Through numerical simulation research, it was found that there was no reaction at all in the explosive layer penetrated by the jet generated by the sinter liner molded, while the explosive layer penetrated by the jet generated through the hot-pressing sintering and extrusion molding liner experienced local reactions on the jet impact channel, and the overall explosive layer did not undergo any reaction. Through experimental verification, it has been proven that all three types of jets have achieved "penetration without explosion" on explosive reactive armor.

Spatial and Temporal Disparity Analyses of Glycosylated Benzaldehyde and Identification and Expression Pattern Analyses of Uridine Diphosphate Glycosyltransferase Genes in Prunus mume.

The species Prunus mume consists of uniquely aromatic woody perennials with large amounts of free aromatic substances in the flower cells. Uridine diphosphate glycosyltransferase (UGT) modifies these free aromatic substances into water-soluble glycoside-bound volatiles (GBVs) which play an important role in regulating the use of volatiles by plants for information exchange, defense, and stress tolerance. To investigate the changes in the glycosidic state of aromatic substances during the flowering period of P. mume and discern the location and expression of glycoside synthesis genes, we extracted and enzymatically hydrolyzed GBVs of P. mume and then utilized gas chromatography-mass spectrometry (GC-MS) to characterize and analyze the types and contents of GBV glycosides. Further, we identified and classified the members of the UGT gene family of P. mume using the bioinformatic method and analyzed the correlation between the expression of the UGT family genes in P. mume and the changes in glycosidic content. The results showed that the benzenoids were the main aromatic substance that was glycosylated during flowering in P. mume and that glycosidic benzaldehyde was the most prevalent compound in different flower parts and at different flowering stages. The titer of glycoside benzaldehyde gradually increased during the bud stage and reached the highest level at the big bud stage (999.6 µg·g-1). Significantly, titers of glycoside benzaldehyde significantly decreased and stabilized after flowering while the level of free benzaldehyde, in contrast, significantly increased and then reached a plateau after the flowering process was completed. A total of 155 UGT family genes were identified in the P. mume genome, which were divided into 13 subfamilies (A-E, G-N); according to the classification of Arabidopsis thaliana UGT gene subfamilies, the L subfamily contains 17 genes. The transcriptome analysis showed that PmUGTL9 and PmUGTL13 were highly expressed in the bud stage and were strongly correlated with the content of the glycosidic form of benzaldehyde at all stages of flowering. This study provides a theoretical basis to elucidate the function of UGT family genes in P. mume during flower development, to explore the mechanism of the storage and transportation of aromatic compounds in flower tissues, and to exploit industrial applications of aromatic products from P. mume.

Unraveling the Photoluminescent Properties of Sb-Doped Cd-Based Inorganic Halides: A First-Principles Study.

Sb-doped Cd-based inorganic halides, with varying connections of CdCl6 octahedra ranging from 0D to 3D, exhibit a variety of photoluminescent properties. Single-band emission is observed in Sb-doped Rb4CdCl6 (0D) and Cs2CdCl4 (2D), while dual-band emission is seen in Sb-doped RbCdCl3 (1D) and CsCdCl3 (3D). Density-functional-based first-principles calculations were conducted. The results reveal that cation vacancies, acting as charge compensators, influence the luminescence properties of dopant centers. In CsCdCl3, the local cation vacancy VCd″ for Sb3+ at the Cd2+ site ([Sb□Cl9]6-) significantly modifies the photoluminescence property, accounting for the observed dual-band emission alongside the nonlocal compensation case. This effect is insignificant in Sb-doped Rb4CdCl6, RbCdCl3, and Cs2CdCl4, due to the large distances or high formation energies of Cd vacancies in these hosts. However, in Sb-doped RbCdCl3, two different potential energy minima, one that involves typical structure relaxation and the other that is off-center, lead to the observed dual-band emission. Furthermore, the shift of the charge transition level illustrates the different temperature dependences of the dual-band emission caused by the charge-compensating point defects. These insights not only enhance our understanding of luminescent materials based on halides containing ns2 dopants but also provide valuable guidance for the design and optimization of luminescent materials.

Study on the forming characteristics of polytetrafluoroethylene/copper jet with different preparation processes.

In this paper, PTFE/Cu composite material for liner is taken as the research object, and the preparation process and jet forming characteristics of PTFE/Cu composite liner are studied. The liners were prepared by extrusion molding, molded sintering and hot-pressing sintering. Due to different preparation processes, different microstructures of the liner can occur, including defects such as pores and microcracks, resulting in different strength and density of the liner, leading to differences in the forming characteristics of the jet. Therefore, the forming process of the jet was simulated by the finite element numerical simulation software. It was found that there was obvious radial expansion effect in the head of the jet, but with the increase of density, the radial expansion effect was weakened, and the jet velocity decreased gradually. The strength and densification of the shaped charge liner prepared by different processes were different. The densification of the molded sintering liner was generally better than that of the other two kinds of shaped charge liners. As a result, the velocity of the jet formed by the molded sintering liner is always the highest, with a numerical simulation velocity of 6642 m/s and an experimental velocity of 6534.7 m/s. The second is the jet of the hot-pressing sintering liner and the lowest velocity is the jet of the extrusion molding cover, with a numerical simulation velocity of 6482 m/s, while the experimental velocity is only 6397.9 m/s. The jet velocity measured by the pulse X-ray experiment was compared with the velocity of the numerical simulation, and the error was within 2.96%, which verifies the accuracy of the numerical simulation.

Study on the Effect of PTFE/Cu Composite Material Preparation Process on Penetration Performance.

The jet formed by the traditional metal liner has a slender shape. The diameter of the jet head is consistent with that of the tail, and the ductility is good. When it is used to penetrate the target, it has a good damage effect. The low-density jet formed by the PTFE/Cu liner, according to the different preparation processes and densities, has different degrees of radial expansion. This phenomenon may lead to the expansion of the jet head during the penetration process, resulting in a damage effect, which is different from the previous jet on the target. In this paper, the numerical simulation of PTFE/Cu liners with different preparation processes penetrating steel targets is carried out, and the effects of different preparation processes and liner density on the penetration characteristics of jets penetrating steel targets are compared and analyzed. The PTFE/Cu shaped charge liner was processed according to different preparation processes, and the jet penetration steel target experiment was carried out, so as to verify and analyze the numerical simulation results.

Study on the Equation of State and Jet Forming of 3D-Printed PLA and PLA-Cu Materials.

In order to improve the research and development efficiency and quality of low-density liners in production and scientific research development, PLA and PLA-Cu composite liners were prepared based on 3D-printing technology. In this paper, the relationship between the shock wave velocity D and the particle velocity u of PLA and PLA-Cu materials was tested by a one-stage light gas gun experiment device, and then the Grüneisen equation of state parameters of the two materials was obtained by fitting. The forming process of the two jets was numerically simulated by using the equation of state. When combined with the pulsed X-ray shooting results of the jets, it was found that the jets of the two materials showed obvious characteristics of "expansion particle flow", and the head of the PLA jet had a gasification phenomenon. The length of the PLA jet at 20 µs in the numerical simulation was 127.2 mm, and the average length of the PLA jet at 20 µs in the pulsed X-ray shooting experiment was 100.45 mm. The length of the PLA jet gasification part accounted for about 21% of the total length of the jet. The average velocity of the head of the PLA jet is 7798.35 m/s, and the average velocity of the head of the PLA-Cu jet is 8104.25 m/s. In this paper, 3D-printing technology is used to prepare the liner for the first time, aiming to open up a new preparation technology and provide a new material selection for low-density material liners.

RNA-Binding Proteins in the Regulation of Adipogenesis and Adipose Function.

The obesity epidemic represents a critical public health issue worldwide, as it is a vital risk factor for many diseases, including type 2 diabetes (T2D) and cardiovascular disease. Obesity is a complex disease involving excessive fat accumulation. Proper adipose tissue accumulation and function are highly transcriptional and regulated by many genes. Recent studies have discovered that post-transcriptional regulation, mainly mediated by RNA-binding proteins (RBPs), also plays a crucial role. In the lifetime of RNA, it is bound by various RBPs that determine every step of RNA metabolism, from RNA processing to alternative splicing, nucleus export, rate of translation, and finally decay. In humans, it is predicted that RBPs account for more than 10% of proteins based on the presence of RNA-binding domains. However, only very few RBPs have been studied in adipose tissue. The primary aim of this paper is to provide an overview of RBPs in adipogenesis and adipose function. Specifically, the following best-characterized RBPs will be discussed, including HuR, PSPC1, Sam68, RBM4, Ybx1, Ybx2, IGF2BP2, and KSRP. Characterization of these proteins will increase our understanding of the regulatory mechanisms of RBPs in adipogenesis and provide clues for the etiology and pathology of adipose-tissue-related diseases.

Resequencing and transcriptomic analysis reveal differences in nitrite reductase in jujube fruit (Ziziphus jujuba Mill.).

BACKGROUND: Jujube is a typical fruit tree species from China. 'Muzao', a cracking-susceptible cultivar, and 'Linhuang No. 1', a cracking-resistant cultivar, were selected in a previous study as contrasting research materials. Whole-genome resequencing and transcriptomic analysis of 'Linhuang No. 1' and 'Muzao' allowed the identification of differentially expressed genes with different gene structures between the two cultivars and could be helpful in explaining the differences and similarities between the two cultivars. RESULTS: Resequencing identified 664,129 polymorphic variable sites between 'Linhuang No. 1' and 'Muzao'. To determine the genetic relationship among 'Linhuang No. 1', 'Muzao' and the jujube genome reference cultivar 'Dongzao', the characteristic polymorphic variable sites were analysed by principal component analysis. The genetic relationship between 'Linhuang No. 1' and 'Muzao' was closer than that of either variety and 'Dongzao'. Nineteen differentially expressed genes were identified by combining transcriptomic analysis with resequencing analysis. LOC107427052 (encoding a nitrite reductase) was identified by Kyoto Encyclopedia of Genes and Genomes (KEGG) enrichment analysis for further study. The identified insertion was not in the domain region of the LOC107427052 gene coding sequence (CDS) region and was verified by the finding that the insertion did not affect translation of the protein. The LOC107427052 gene expression levels, nitrite reductase activities and nitrite contents of 'Muzao' were significantly higher than the corresponding values of 'Linhuang No. 1' at the young fruit stage. There was no significant difference in the quantity of the product of nitrite reductase, namely, ammonia, between the two cultivars. CONCLUSIONS: The present study was the first to explore the differences between different jujube cultivars ('Linhuang No. 1' and 'Muzao') by combining genome resequencing and transcriptomics. LOC107427052 (encoding a nitrite reductase) was characterized by KEGG enrichment analysis. The insertion in the CDS region of the LOC107427052 gene provides a new direction for the study of nitrogen metabolism in jujube. Our study has laid a foundation for the comparative analysis of nitrite metabolism between the jujube cultivars 'Linhuang No. 1' and 'Muzao'.

Comparative analysis of transcriptomic profiling to identify genes involved in the bulged surface of pear fruit (Pyrus bretschneideri Rehd. cv. Yuluxiangli).

Pear (Pyrus spp.) belongs to the genus Pyrus, in the family Rosaceae. Some varieties of pear fruit exhibit bulged surface, which seriously affects the quality and commodity value of the pear fruit. In this study, we performed anatomical, physiological, and transcriptomic analysis to explore the mechanism of paclobutrazol (PBZ) on the bulged surface of pear fruit. The vascular bundles of flesh were more evenly distributed, and the fruit cells were more compactly arranged and smaller in size treated with PBZ. However, the auxin (IAA) content of flesh was decreased in the treated group. Furthermore, the GO and KEGG analysis of differentially expressed genes (DEGs) showed that auxin, phenylpropanoid metabolic pathways, and transcriptional factor genes were significantly enriched on the relieved bulged surface of pear fruit. And it was analyzed that some genes contained auxin responded cis-elements from the selected DEGs in the promoter region. We conclude that PBZ plays a negative role in cell division, cell elongation, and vascular bundle development on the bulged surface of pear fruit through the involvement of auxin-related genes. This study will provide a theoretical basis for the regulation of the bulged surface of pear fruit by a growth retardant agent. SUPPLEMENTARY INFORMATION: The online version of this article (10.1007/s12298-021-00929-z) contains supplementary material, which is available to authorized users.

Study on the structure and membrane disruption of the peptide oligomers constructed by hIAPP18-27 peptide and its d,l-alternating isomer.

Increasing lines of evidence show that the oligomeric intermediates of amyloid peptides/proteins are toxic to biological membranes. However, the structural features of the oligomers that are closely associated with the ability to damage biological membranes are far from understanding. In this study, we constructed two species of oligomers using hIAPP18-27 peptide and its d,l-alternating isomer, examined the disruptive ability of the oligomers to POPC/POPG 4:1 vesicles by leakage assay and 31P NMR spectroscopy, and characterized the structural features of the oligomers by CD, TEM, 1H NMR and fluorescence quenching experiments. We found that the d,l-alternating peptide oligomers are more disruptive than the all-L peptide oligomers to the lipid membrane. The characterization of the secondary structure revealed that the d,l-alternating peptide adopts an extended polyproline type-II (PPII) conformation, while the all-L peptide adopts a random coil conformation in oligomers. Compared with the all-L peptide oligomers, the d,l-alternating peptide oligomers are less compact and keep more hydrophobic groups water exposed. Both the changes from PPII to α-sheet in the structure of d,l-alternating peptide and from random coil to ß-sheet in the structure of all-L peptide reduce the ability of the peptide oligomers to disrupt the lipid membrane. Our results suggest that an oligomer with extended peptide chains could be more potent in membrane disruption than an oligomer with folded peptide chains and an increase in peptide-peptide interaction could decrease the disruptive ability of oligomer.

Genome-wide identification, characterization, expression and enzyme activity analysis of coniferyl alcohol acetyltransferase genes involved in eugenol biosynthesis in Prunus mume.

Prunus mume, a traditional Chinese flower, is the only species of Prunus known to produce a strong floral fragrance, of which eugenol is one of the principal components. To explore the molecular mechanism of eugenol biosynthesis in P. mume, patterns of dynamic, spatial and temporal variation in eugenol were analysed using GC-MS. Coniferyl alcohol acetyltransferase (CFAT), a member of the BAHD acyltransferase family, catalyses the substrate of coniferyl alcohol to coniferyl acetate, which is an important substrate for synthesizing eugenol. In a genome-wide analysis, we found 90 PmBAHD genes that were phylogenetically clustered into five major groups with motif compositions relatively conserved in each cluster. The phylogenetic tree showed that the PmBAHD67-70 proteins were close to the functional CFATs identified in other species, indicating that these four proteins might function as CFATs. In this work, 2 PmCFAT genes, named PmCFAT1 and PmCFAT2, were cloned from P. mume 'Sanlunyudie', which has a strong fragrance. Multiple sequences indicated that PmCFAT1 contained two conserved domains, HxxxD and DFGWG, whereas DFGWG in PmCFAT2 was changed to DFGFG. The expression levels of PmCFAT1 and PmCFAT2 were examined in different flower organs and during the flowering stages of P. mume 'Sanlunyudie'. The results showed that PmCFAT1 was highly expressed in petals and stamens, and this expression increased from the budding stage to the full bloom stage and decreased in the withering stage, consistent with the patterns of eugenol synthesis and emission. However, the peak of gene expression appeared earlier than those of eugenol synthesis and emission. In addition, the expression level of PmCFAT2 was higher in pistils and sepals than in other organs and decreased from the budding stage to the blooming stage and then increased in the withering stage, which was not consistent with eugenol synthesis. Subcellular localization analysis indicated that PmCFAT1 and PmCFAT2 were located in the cytoplasm and nucleus, while enzyme activity assays showed that PmCFAT1 is involved in eugenol biosynthesis in vitro. Overall, the results suggested that PmCFAT1, but not PmCFAT2, contributed to eugenol synthesis in P. mume.

Tissue expression and variation analysis of three bovine adipokine genes revealed their effect on growth traits in native Chinese cattle.

Adipokines play a crucial role in the regulation of energy homeostasis; however, little is known about genetic alterations in this family that may contribute to economic traits in cattle. Therefore, this study conducts transcript profiles, variations and association studies of three major adipokines, leptin (LEP), tumour necrosis factor (TNF) and angiopoietin-like protein 8 (ANGPTL8), to evaluate their effects on native Chinese cattle. Using quantitative real-time PCR, the study revealed that the bovine LEP was expressed primarily in the back and visceral fat, while TNF was predominantly expressed in spleen and ANGPTL8 was mainly expressed in back fat and liver. Five single nucleotide polymorphisms (SNPs) including two missense SNPs (SNP1: g.12254T>C and SNP2: g.14177C>T) in LEP, a synonymous SNP (SNP3: g.2130A>G) in TNF and two SNPs (SNP4: g.629G>A and SNP5: g.884T>C) in the 5'UTR of ANGPTL8 were identified and genotyped in 537 individuals from six Chinese cattle breeds. Bioinformatics analysis revealed that SNP1 might disrupt the efficient binding of LEP to its receptor, SNP3 might affect translation efficiency of TNF, and SNP4 and SNP5 were likely to affect stability, splicing and nuclear export of ANGPTL8 mRNA. Consistently, association studies indicated that three SNPs (SNP1, SNP3 and SNP5) were significantly associated with body weight, heart girth, average daily gain, hip width and body length in 100 Nanyang cattle (p < 0.05). Overall, our results support the view that LEP, TNF and ANGPTL8 could be used as biomarkers to improve the growth performance in Chinese cattle selection programmes.

Two Novel SNPs of PPARγ Significantly Affect Weaning Growth Traits of Nanyang Cattle.

Peroxisome-proliferator-activated receptor gamma (PPARγ) is a key transcription factor that controls adipocyte differentiation and energy in mammals. Therefore, PPARγ is a potential factor influencing animal growth traits. This study primarily evaluates PPARγ as candidate gene for growth traits of cattle and identifies potential molecular marker for cattle breeding. Per previous studies, PPARγ mRNA was mainly expressed at extremely high levels in adipose tissues as shown by quantitative real-time polymerase chain reaction analysis. Three novel SNPs of the bovine PPARγ gene were identified in 514 individuals from six Chinese cattle breeds: SNP1 (AC_000179.1 g.57386668 C > G) in intron 2 and SNP2 (AC_000179.1 g.57431964 C > T) and SNP3 (AC_000179.1 g.57431994 T > C) in exon 7. The present study also investigated genetic characteristics of these SNP loci in six populations. Association analysis showed that SNP1 and SNP3 loci significantly affect weaning growth traits, especially body weight of Nanyang cattle. These results revealed that SNP1 and SNP3 are potential molecular markers for cattle breeding.

Cholesterol-sensing role of phenylalanine in the interaction of human islet amyloid polypeptide with lipid bilayers.

The interactions between hIAPP and the pancreatic ß-cells are associated with ß-cell death in type II diabetes. Cholesterol modulates hIAPP-membrane interaction and hIAPP aggregation. The molecular mechanism underlying this is not well understood. Here we explore the cholesterol-sensing role of F15 in the interactions of hIAPP and hIAPP1-19 with various compositions of lipids, including DOPC, DPPC and DOPC/DPPC using NMR, CD, ThT fluorescence and dye leakage assays. We show that both hIAPP and hIAPP1-19 are more potent in the disruption to the membranes with cholesterol than they are in the disruption to the membranes without cholesterol. A substitution of F15 by leucine affects the binding and disruption of the peptides to the membranes slightly in the absence of cholesterol, but decreases the activities largely in the presence of cholesterol. F15 also plays a role in accelerating fibrillar assembly of hIAPP, but the function is independent of cholesterol in nature. The promotion of cholesterol to the disruptive potency of hIAPP is more effective in the membrane with raft-like domains than in the membrane with a dispersed distribution of cholesterol. Our results suggest that F15 plays a key role in the cholesterol-sensing binding and disruption of hIAPP to the PC membranes and the distribution of cholesterol in the membranes has an influence on the disruptive activity of hIAPP.

Cloning and characterization of adipogenin and its overexpression enhances fat accumulation of bovine myosatellite cells.

Adipogenin (ADIG) is an adipocyte-specific membrane protein highly expressed in adipose tissues and is increased during the adipocyte differentiation. However, the roles and mechanisms of ADIG on fat accumulation and adipocyte differentiation in ex vivo still largely unknown. In this study, we isolated bovine myosatellite cells based on adhesion characteristics to investigate whether ADIG overexpression could promote trans-differentiation and increase fat accumulation in myosatellite cells. Immunofluorescence labeling was then used for the phenotypic characteristics of myosatellite. Our results showed that, after induction of differentiation, adenovirus mediated ADIG overexpression could upregulate expression level of PPARγ, and Oil Red O staining showed larger lipid drops compared to control groups. In consistent, key components of Hh signaling pathway were down regulated when infected with ADIG adenovirus, even though treated with inhibitor of Hh signaling pathway together could not induce further decrease. In addition, bioinformatics analysis of ADIG was also performed for its structure and function.

An Optimized Trichloroacetic Acid/Acetone Precipitation Method for Two-Dimensional Gel Electrophoresis Analysis of Qinchuan Cattle Longissimus Dorsi Muscle Containing High Proportion of Marbling.

Longissimus dorsi muscle (LD) proteomics provides a novel opportunity to reveal the molecular mechanism behind intramuscular fat deposition. Unfortunately, the vast amounts of lipids and nucleic acids in this tissue hampered LD proteomics analysis. Trichloroacetic acid (TCA)/acetone precipitation is a widely used method to remove contaminants from protein samples. However, the high speed centrifugation employed in this method produces hard precipitates, which restrict contaminant elimination and protein re-dissolution. To address the problem, the centrifugation precipitates were first grinded with a glass tissue grinder and then washed with 90% acetone (TCA/acetone-G-W) in the present study. According to our result, the treatment for solid precipitate facilitated non-protein contaminant removal and protein re-dissolution, ultimately improving two-dimensional gel electrophoresis (2-DE) analysis. Additionally, we also evaluated the effect of sample drying on 2-DE profile as well as protein yield. It was found that 30 min air-drying did not result in significant protein loss, but reduced horizontal streaking and smearing on 2-DE gel compared to 10 min. In summary, we developed an optimized TCA/acetone precipitation method for protein extraction of LD, in which the modifications improved the effectiveness of TCA/acetone method.

Haplotype distribution in the class I sirtuin genes and their associations with ultrasound carcass traits in Qinchuan cattle (Bos taurus).

Class I sirtuin genes including SIRT1, SIRT2 and SIRT3, are members of the nicotinamide adenine dinucleotide (NAD)-dependent family of histone deacetylases, and play essential roles in senescence, metabolism, and apoptosis. This study was conducted to detect potential polymorphisms of the bovine class I sirtuin genes and explore their relationships with ultrasound carcass traits in Qinchuan cattle. Four non-coding mutations in the 3'UTR (SIRT1: g.25751A > C, SIRT1: g.25846A > G, SIRT2: g.19676G > A and SIRT3: g. 25702C > T) and three mutations in exons (SIRT2: g.4062C > T; SIRT2: g.4406C > T and SIRT3: g.25557A > G) were identified in 468 individuals of Qinchuan cattle. Chi-square tests showed that g.25751A > C, g.19676G > A, and g.25702C > T were in Hardy-Weinberg disequilibrium (χ(2) < χ0.05(2)). The statistical analyses indicated that six SNPs were significantly associated with the ultrasound carcass traits (P < 0.05) except g.4062C > T (SIRT2) (P > 0.05). These results indicate that the variations in the class I sirtuin genes and their corresponding genotypes may be considered as molecular markers for economic traits in cattle breeding.

A comparative analysis of characteristic floral scent compounds in Prunus mume and related species.

In order to investigate the difference in their characteristic floral scents between Prunus mume Siebold & Zucc. and the related Prunus species, their headspace volatiles and endogenous extraction were analyzed by gas chromatography-mass spectrometry. The efficiency of substrate utilization of the flowers was studied by incubating them with different alcohol substrates. Our results indicated that benzyl acetate is a dominant compound influencing the characteristic floral scent of P. mume. An alcohol substrate concentration of 4 mmol L(-1) and a reaction time of 2 h were constituted the reaction condition for catalysis of exogenous alcohol substrates by the flowers. Under these conditions, Prunus sibirica exhibited the highest utilization efficiency for benzyl alcohol substrate while the utilization efficiency of Prunus persica was the lowest. Comparative analysis of several alcohol substrates indicated that the flowers of the tested species had selective specificity for benzyl alcohol substrates.

The genome of Prunus mume.

Prunus mume (mei), which was domesticated in China more than 3,000 years ago as ornamental plant and fruit, is one of the first genomes among Prunus subfamilies of Rosaceae been sequenced. Here, we assemble a 280M genome by combining 101-fold next-generation sequencing and optical mapping data. We further anchor 83.9% of scaffolds to eight chromosomes with genetic map constructed by restriction-site-associated DNA sequencing. Combining P. mume genome with available data, we succeed in reconstructing nine ancestral chromosomes of Rosaceae family, as well as depicting chromosome fusion, fission and duplication history in three major subfamilies. We sequence the transcriptome of various tissues and perform genome-wide analysis to reveal the characteristics of P. mume, including its regulation of early blooming in endodormancy, immune response against bacterial infection and biosynthesis of flower scent. The P. mume genome sequence adds to our understanding of Rosaceae evolution and provides important data for improvement of fruit trees.