Ultra-Dense Supported Ruthenium Oxide Clusters via Directed Ion Exchange for Efficient Valorization of 5-Hydroxymethylfurfural.

Maximizing the loadings of active centers without aggregation for a supported catalyst is a grand challenge but essential for achieving high gravimetric catalytic activity, especially toward multi-step reactions. The oxidation of 5-hydroxymethylfurfural (HMF), a key biomass-derived platform molecule, into 2,5-furandicarboxylic acid (FDCA), a promising alternative to polyester monomer, is such a multi-step reaction that involves 6 proton and electron transfers. This process often demands strong alkaline environment but also suffers from the alkali-driven polymerization side-reaction. Meanwhile, neutral media ameliorates the polymerization, but lacks efficient catalyst toward deep oxidation. Herein, we devised a strategy of creating ultra-dense supported Ru oxide clusters via directed ion exchange in a Co hydroxyanion (CoHA) support material. Pyrimidine ligands were first incorporated into the CoHA interlayers, and the subsequent evacuation of pyrimidines created porous channels for the directed ion exchange with the built-in anions in CoHA, which allowed the dense and mono-disperse functionalization of RuCl6 2- anions and their resulting Ru oxide clusters. These ultra-dense Ru oxide clusters not only enable high HMF electrooxidation currents under neutral conditions but also create microscopic channels in-between the clusters for the expedited re-adsorption and oxidation of intermediates toward highly oxidized product, such as 5-formyl-2-furoic acid (FFCA) and FDCA. A two-stage HMF oxidation process, consisting of ambient conversion of HMF into FFCA and FFCA oxidation into FDCA under 60 °C, was eventually developed to first achieve a high FDCA yield of 92.1 % under neutral media with significantly reduced polymerization.

Regulating Lateral Adsorbate Interaction for Efficient Electroreforming of Bio-polyols.

Tailoring the selectivity at the electrode-electrolyte interface is one of the greatest challenges for heterogeneous electrocatalysis, and complementary strategies to catalyst structural designs need to be developed. Herein, we proposed a new strategy of controlling the electrocatalytic pathways by lateral adsorbate interaction for the bio-polyol oxidation. Redox-innocent 1,1,1,3,3,3-hexafluoro-2-propanol (HFIP) anion possesses the alcoholic property that facilely adsorbs on the nickel oxyhydroxide catalyst, but is resistant to oxidation due to the electron-withdrawing trifluoromethyl groups. The alien HFIP adsorbents can compete with bio-polyols and form a mixed adsorbate layer that creates lateral adsorbate interaction via hydrogen bonding, which achieved a >2-fold enhancement of the oxalate selectivity to 55 % for the representative glycerol oxidation and can be extended to various bio-polyol substrates. Through in situ spectroscopic analysis and DFT calculation on the glycerol oxidation, we reveal that the hydrogen-bonded adsorbate interaction can effectively tune the adsorption energies and tailor the oxidation capabilities toward the targeted products. This work offers an additional perspective of tuning electrocatalytic reactions via introducing redox-innocent adsorbates to create lateral adsorbate interactions.

Electrode/Electrolyte Synergy for Concerted Promotion of Electron and Proton Transfers toward Efficient Neutral Water Oxidation.

Neutral water oxidation is a crucial half-reaction for various electrochemical applications requiring pH-benign conditions. However, its sluggish kinetics with limited proton and electron transfer rates greatly impacts the overall energy efficiency. In this work, we created an electrode/electrolyte synergy strategy for simultaneously enhancing the proton and electron transfers at the interface toward highly efficient neutral water oxidation. The charge transfer was accelerated between the iridium oxide and in situ formed nickel oxyhydroxide on the electrode end. The proton transfer was expedited by the compact borate environment that originated from hierarchical fluoride/borate anions on the electrolyte end. These concerted promotions facilitated the proton-coupled electron transfer (PCET) events. Due to the electrode/electrolyte synergy, Ir-O and Ir-OO- intermediates could be directly detected by in situ Raman spectroscopy, and the rate-limiting step of Ir-O oxidation was determined. This synergy strategy can extend the scope of optimizing electrocatalytic activities toward more electrode/electrolyte combinations.

Ligand vacancy channels in pillared inorganic-organic hybrids for electrocatalytic organic oxidation with enzyme-like activities.

Simultaneously achieving abundant and well-defined active sites with high selectivity has been one of the ultimate goals for heterogeneous catalysis. Herein, we construct a class of Ni hydroxychloride-based inorganic-organic hybrid electrocatalysts with the inorganic Ni hydroxychloride chains pillared by the bidentate N-N ligands. The precise evacuation of N-N ligands under ultrahigh-vacuum forms ligand vacancies while partially retaining some ligands as structural pillars. The high density of ligand vacancies forms the active vacancy channel with abundant and highly-accessible undercoordinated Ni sites, exhibiting 5-25 fold and 20-400 fold activity enhancement compared to the hybrid pre-catalyst and standard ß-Ni(OH)2 for the electrochemical oxidation of 25 different organic substrates, respectively. The tunable N-N ligand can also tailor the sizes of the vacancy channels to significantly impact the substrate configuration leading to unprecedented substrate-dependent reactivities on hydroxide/oxide catalysts. This approach bridges heterogenous and homogeneous catalysis for creating efficient and functional catalysis with enzyme-like properties.

Ligand Hybridization for Electro-reforming Waste Glycerol into Isolable Oxalate and Hydrogen.

The electro-reforming of glycerol is an emerging technology of simultaneous hydrogen production and biomass valorization. However, its complex reaction network and limited catalyst tunability restrict the precise steering toward high selectivity. Herein, we incorporated the chelating phenanthrolines into the bulk nickel hydroxide and tuned the electronic properties by installing functional groups, yielding tunable selectivity toward formate (max 92.7 %) and oxalate (max 45.3 %) with almost linear correlation with the Hammett parameters. Further combinatory study of intermediate analysis and various spectroscopic techniques revealed the electronic effect of tailoring the valence band that balances between C-C cleavage and oxidation through the key glycolaldehyde intermediate. A two-electrode electro-reforming setup using the 5-nitro-1,10-phenanthroline-nickel hydroxide catalyst was further established to convert crude glycerol into pure H2 and isolable sodium oxalate with high efficiency.

Steering the Glycerol Electro-Reforming Selectivity via Cation-Intermediate Interactions.

Electro-reforming of renewable biomass resources is an alternative technology for sustainable pure H2 production. Herein, we discovered an unconventional cation effect on the concurrent formate and H2 production via glycerol electro-reforming. In stark contrast to the cation effect via forming double layers in cathodic reactions, residual cations at the anode were discovered to interact with the glycerol oxidation intermediates to steer its product selectivity. Through a combination of product analysis, transient kinetics, crown ether trapping experiments, in situ IRRAS and DFT calculations, the aldehyde intermediates were discovered to be stabilized by the Li+ cations to favor the non-oxidative C-C cleavage for formate production. The maximal formate efficiency could reach 81.3 % under ≈60 mA cm-2 in LiOH. This work emphasizes the significance of engineering the microenvironment at the electrode-electrolyte interface for efficient electrolytic processes.

Recognition of Surface Oxygen Intermediates on NiFe Oxyhydroxide Oxygen-Evolving Catalysts by Homogeneous Oxidation Reactivity.

NiFe oxyhydroxide is one of the most promising oxygen evolution reaction (OER) catalysts for renewable hydrogen production, and deciphering the identity and reactivity of the oxygen intermediates on its surface is a key challenge but is critical to the catalyst design for improving the energy efficiency. Here, we screened and utilized in situ reactive probes that can selectively target specific oxygen intermediates with high rates to investigate the OER intermediates and pathway on NiFe oxyhydroxide. Most importantly, the oxygen atom transfer (OAT) probes (e.g., 4-(diphenylphosphino) benzoic acid) could efficiently inhibit the OER kinetics by scavenging the OER intermediates, exhibiting lower OER currents, larger Tafel slopes, and larger kinetic isotope effect (KIE) values, while probes with other reactivities demonstrated much smaller effects. Combining the OAT reactivity with electrochemical kinetic and operando Raman spectroscopic techniques, we identified a resting Fe═O intermediate in the Ni-O scaffold and a rate-limiting O-O chemical coupling step between a Fe═O moiety and a vicinal bridging O. DFT calculation further revealed a longer Fe═O bond formed on the surface and a large kinetic energy barrier of the O-O chemical coupling step, corroborating the experimental results. These results point to a new direction of liberating lattice O and expediting O-O coupling for optimizing NiFe-based OER electrocatalyst.

MicroRNA-22 enhances the differentiation of mouse induced pluripotent stem cells into alveolar epithelial type II cells.

Considerable evidence has verified that microRNAs (miRNAs) play important roles in various cellular processes including differentiation. However, the regulatory roles of miRNAs involved in the differentiation of induced pluripotent stem cells (iPSC) into lung epithelial cells are still unknown. In this study, we first evaluated the current protocols to differentiate iPSC into alveolar epithelial type II (AEC II) cells, but the efficiency is low. We next identified that miR-22 can efficiently enhance the differentiation of iPSC into AEC II cells under the stimulation of proper growth factors and growing on appropriate matrix. Moreover, the AEC II cells generated from iPSC with miR-22 overexpression can proliferate and secrete lung surfactant. Here, we discovered a previously unknown interaction between miR-22 and iPSC differentiation but also provide a potential target for the effective derivation of AEC II from iPSCs for cell-based therapy.

MicroRNA-204-5p Inhibits Ovarian Cancer Cell Proliferation by Down-Regulating USP47.

Ovarian cancer (OC) is the most lethal gynecologic cancer, and the incidence of OC has risen steadily worldwide. Numerous microRNAs (miRNAs) have been found to be involved in the progression of OC. miR-204-5p is down-regulated and functions as a tumor suppressor in various types of human malignant tumors. However, the biological roles and molecular mechanisms of miR-204-5p in OC still remain unclear. In this study, the aberrant down-regulation of miR-204-5p was detected in OC tissues. We also observed that miR-204-5p overexpression represses OC cell proliferation. Ubiquitin-specific peptidase 47 (USP47) is verified as the functional target of miR-204-5p, through which it plays an important biological role in OC. Our results uncover new functions and mechanisms for miR-204-5p in the progression of OC, and provide a potential therapeutic target for the treatment of OC.

Monoclonal antibody based inhibition ELISA as a new tool for the analysis of melamine in milk and pet food samples.

Stories of recent cases about melamine misuse to raise the false impression of a high protein content of milk in China emerged in September of 2008, have become an international health event. To meet the need for rapid and reliable monitoring of melamine in milk samples, a monoclonal antibody (mAb) was produced and an inhibition enzyme-linked immunosorbent assay (ELISA) was developed based on the mAb. The standard curve was linear in the range from 0.03 to 9 ng mL(-1) with a detection limit (LOD) of 0.01 ng mL(-1). The sensitivity of the assay was 0.35 ng mL(-1). The average recovery values of melamine in the liquid milk, powder milk, dog food and cat food were 99%, 96%, 9% and 98%, respectively and the coefficient of variation (CV) values of all samples were less than 10%. The obtained results showed a potential method as a tool for the rapid and reliable monitoring of melamine in liquid milk and milk powder samples (158 words).