Na3[Al2B6P4O22(OH)3](H2O)6 and Na3[Al2BP2O11](H2O)0.5: Two Remarkable Complex Aluminum Borophosphates.

Two remarkable aluminum borophosphates (AlBPOs), namely, Na3[Al2B6P4O22(OH)3](H2O)6 (denoted as ABPO1) and Na3[Al2BP2O11](H2O)0.5 (denoted as ABPO2), have been designed and prepared by low-temperature flux syntheses. The exceptional open framework structure of ABPO1 is formed by a unique microanionic network [Al2B6P4O22(OH)3]n3-, which contains three types of 8-, 12-, and 16-membered ring (MR) tunnels. Interestingly, these tunnels are featured by a type of super-nanocage as large as ∼1.753 nm × 1.753 nm × 1.753 nm, which is the first example of AlBPOs containing extra-large cages. Importantly, it was found that Na+ can be partially exchanged by K+, Sr2+, Cd2+, and Ni2+, which means that it is a potential ionic exchanger for removing radionuclides and toxic cations. The structure of ABPO2 features a unique 2D anionic AlBPO layer composed of corner-sharing AlO6 octahedra and AlO4, BO4, and PO4 tetrahedra. To the best of our knowledge, this is the first example of both AlO6 octahedra and AlO4 tetrahedra being contained in the structure. 9-MRs can be observed along the b-axis. Herein, the syntheses and topological structures of ABPO1 and ABPO2 as well as elemental analysis, thermal stability, infrared spectroscopy, UV-vis diffuse reflectance, structural properties, and ionic exchange properties are also discussed.

U(V) stabilization via aliovalent incorporation of Ln(III) into oxo-salt framework.

Pentavalent uranium compounds are key components of uranium's redox chemistry and play important roles in environmental transport. Despite this, well-characterized U(V) compounds are scarce primarily because of their instability with respect to disproportionation to U(IV) and U(VI). In this work, we provide an alternate route to incorporation of U(V) into a crystalline lattice where different oxidation states of uranium can be stabilized through the incorporation of secondary cations with different sizes and charges. We show that iriginite-based crystalline layers allow for systematically replacing U(VI) with U(V) through aliovalent substitution of 2+ alkaline-earth or 3+ rare-earth cations as dopant ions under high-temperature conditions, specifically Ca(UVIO2)W4O14 and Ln(UVO2)W4O14 (Ln = Nd, Sm, Eu, Gd, Yb). Evidence for the existence of U(V) and U(VI) is supported by single-crystal X-ray diffraction, high energy resolution X-ray absorption near edge structure, X-ray photoelectron spectroscopy, and optical absorption spectroscopy. In contrast with other reported U(V) materials, the U(V) single crystals obtained using this route are relatively large (several centimeters) and easily reproducible, and thus provide a substantial improvement in the facile synthesis and stabilization of U(V).

First Potassium Fluoroaluminate Ionic Exchanger for Rapid and Selective Removal of Sr2+ with High Capacity.

90Sr, as a typical artificial radionuclide, poses a serious threat to human health and the ecological environment. The selective removal of this radionuclide from industrial nuclear waste is crucial for our environment. Here we report a novel potassium fluoroaluminate, K2[(AlF5)H2O], which was synthesized by a simple low-temperature one-step method. It adopts a 1D AlF6-chain structure, which consists of exchangeable potassium ions in between the infinite chains of octahedral Al centers. As a remarkable inorganic ionic exchanger, K2[(AlF5)H2O] has a high chemical stability (resistance of pH=~3-12) and thermal stability (≥~300 °C). It possesses an excellent adsorption selectivity (Kd=~6.1×104 mL ⋅ g-1) and a maximum adsorption capacity of qm=~120.32 mg ⋅ g-1 for Sr2+. Importantly, it still keep a very good selectivity for Sr2+ ions even in the presence of competing Na+, Mg2+ and Ca2+ aqueous solutions. K2[(AlF5)H2O] is the first example of fluoroaluminate ionic exchange materials that can capture Sr2+. This result opens up a new way to design and synthesize inorganic ionic exchangers for the selective removal of Sr2+ ions from radioactive waste water.

Understanding of the structural chemistry in the uranium oxo-tellurium system under HT/HP conditions.

The study of phase formation in the U-Te-O systems with mono and divalent cations under high-temperature high-pressure (HT/HP) conditions has resulted in four new inorganic compounds: K2 [(UO2) (Te2O7)], Mg [(UO2) (TeO3)2], Sr [(UO2) (TeO3)2] and Sr [(UO2) (TeO5)]. Tellurium occurs as TeIV, TeV, and TeVI in these phases which demonstrate the high chemical flexibility of the system. Uranium VI) adopts a variety of coordinations, namely, UO6 in K2 [(UO2) (Te2O7), UO7 in Mg [(UO2) (TeO3)2] and Sr [(UO2) (TeO3)2], and UO8 in Sr [(UO2) (TeO5)]. The structure of K2 [(UO2) (Te2O7)] is featured with one dimensional (1D) [Te2O7]4- chains along the c-axis. The Te2O7 chains are further linked by UO6 polyhedra, forming the 3D [(UO2) (Te2O7)]2- anionic frameworks. In Mg [(UO2) (TeO3)2], TeO4 disphenoids share common corners with each other resulting in infinite 1D chains of [(TeO3)2]4- propagating along the a-axis. These chains link the uranyl bipyramids by edge sharing along two edges of the disphenoids, resulting in the 2D layered structure of [(UO2) (Te2O6)]2-. The structure of Sr [(UO2) (TeO3)2] is based on 1D chains of [(UO2) (TeO3)2]∞ 2- propagating into the c-axis. These chains are formed by edge-sharing uranyl bipyramids which are additionally fused together by two TeO4 disphenoids, which also share two edges. The 3D framework structure of Sr [(UO2) (TeO5)] is composed of 1D [TeO5]4- chains sharing edges with UO7 bipyramids. Three tunnels based on 6-Membered rings (MRs) are propagating along [001] [010] and [100] directions. The HT/HP synthetic conditions for the preparation of single crystalline samples and their structural aspects are discussed in this work.

Understanding the role of flux, pressure and temperature on polymorphism in ThB2O5.

A novel polymorph of ThB2O5, denoted as ß-ThB2O5, was synthesised under high-temperature high-pressure (HT/HP) conditions. Via single crystal X-ray diffraction measurements, ß-ThB2O5 was found to form a three-dimensional (3D) framework structure where thorium atoms are ten-fold oxygen coordinated forming tetra-capped trigonal prisms. The only other known polymorph of ThB2O5, denoted α, synthesised herein using a known borax, B2O3-Na2B4O7, high temperature solid method, was found to transform to the ß polymorph when exposed to conditions of 4 GPa and ∼900 °C. Compared to the α polymorph, ß-ThB2O5 has smaller molar volume by approximately 12%. Exposing a mixture of the α and ß polymorphs to HT/HP conditions ex situ further demonstrated the preferred higher-pressure phase being ß, with no α phase material being observed via Rietveld refinements against laboratory X-ray powder diffraction (PXRD) measurements. In situ heating PXRD measurements on α-ThB2O5 from RT to 1030 °C indicated that α-ThB2O5 transforms to the ß variant at approximately 900 °C via a 1st order mechanism. ß-ThB2O5 was found to exist only over a narrow temperature range, decomposing above 1050 °C. Ab initio calculations using density functional theory (DFT) with the Hubbard U parameter indicated, consistent with experimental observations, that ß is both the preferred phase at higher temperatures and high pressures. Interestingly, it was found by switching from B2O3-Na2B4O7 to H3BO3-Li2CO3 flux using consistent high temperature solid state conditions for the synthesis of the α variant, ß-ThB2O5 could be generated. Comparison of their single crystal measurements showed this was identical to that obtained from HT/HP conditions.

Improving robustness in interdependent networks under intentional attacks by optimizing intra-link allocation.

The interdependent network is particularly vulnerable to attacks on high degree nodes; therefore, the improvement of its robustness under intentional attacks has become an important topic. In this paper, we put forward a new metric to quantify the robustness of interdependent networks against intentional attacks and develop an improved simulated annealing algorithm (ISAA) to maximize this metric by optimizing the allocation of intra-links in subnetworks. Based on the comparison between the ISAA and existing algorithms, it is found that the algorithm presented in this paper is more effective to enhance the robustness of an interdependent scale-free network (ISFN). By applying the ISAA to ISFNs with different coupling preferences, there is a key finding that the robustness of the optimized ISFN is significantly stronger than that of the original ISFN. In particular, for cases of disassortative and random couplings, no sudden collapse occurs in optimized ISFNs. According to the analysis of the degree and the clustering coefficient, we find that the subnetwork of the optimized ISFN exhibits an onion-like structure. In addition, the ISFN whose robustness is enhanced to resist the attacks on high degree nodes is still robust to the intentional attacks concerning the betweenness and PageRank.

Modelling cascading failures in networks with the harmonic closeness.

Many studies on cascading failures adopt the degree or the betweenness of a node to define its load. From a novel perspective, we propose an approach to obtain initial loads considering the harmonic closeness and the impact of neighboring nodes. Based on simulation results for different adjustable parameter θ, local parameter δ and proportion of attacked nodes f, it is found that in scale-free networks (SF networks), small-world networks (SW networks) and Erdos-Renyi networks (ER networks), there exists a negative correlation between optimal θ and δ. By the removal of the low load node, cascading failures are more likely to occur in some cases. In addition, we find a valuable result that our method yields better performance compared with other methods in SF networks with an arbitrary f, SW and ER networks with large f. Moreover, the method concerning the harmonic closeness makes these three model networks more robust for different average degrees. Finally, we perform the simulations on twenty real networks, whose results verify that our method is also effective to distribute the initial load in different real networks.

Porous Uranyl Borophosphates with Unique Three-Dimensional Open-Framework Structures.

Two novel alkali-metal uranyl borophosphates have been prepared and characterized for the first time, namely, K5(UO2)2[B2P3O12(OH)]2(OH)(H2O)2 and K2(UO2)12[B(H2PO4)4](PO4)8(OH)(H2O)6 denoted as KUPB1 and KUPB2, respectively. KUPB1 was obtained hydrothermally at 220 °C and crystallizes in a monoclinic structure in the chiral space group P21. The unit cell parameters of KUPB1 are a = 6.7623(2) Å, b = 19.5584(7) Å, c = 11.0110(4) Å, α = γ = 90°, ß = 95.579(3)°, and V = 1449.42(8) Å3. It features a unique three-dimensional (3D) open-framework structure, composed of two corner-sharing linked one-dimensional (1D) anionic borophosphates (BP), [B2P3O13]5-, along the a axis and uranyl phosphate (UP), [(UO2)(PO4)3]7-, chains along the c axis, further bridged by PO4 tetrahedra. Multi-intersectional channels can be observed within the structure, in which the largest 11-ring (11-R) tunnel size is ∼7.0 Å × 8.8 Å. Its simplified framework can be described as a new 4-nodal net topological type with a point symbol of {4.84.10}{42.6}2{43.62.83.102}{82.10}. By modification of the synthetic conditions of KUPB1 through an increase in the amount of H3BO3 as flux 4-fold and a reduction of water as the reaction medium, the novel compound KUPB2 is generated. The unit cell parameters of KUPB2 are a = b = 21.8747(3) Å, c = 7.0652(2) Å, α = ß = γ = 90°, and V = 3380.72(12) Å3. KUPB2 crystallizes in a tetragonal structure in the polar space group I4̅2m, and its structure is based on a highly complex 3D framework, {(UO2)12[B(PO4)4](PO4)8}9-, in which 1D 8-R UP [(UO2)(PO4)]- tubes can be observed along the c axis. The [(UO2)(PO4)]- tubes consist of three uranyl chains along the c axis, which are linked alternately by [PO4]3- tetrahedra. Those isolated 1D [(UO2)(PO4)]- tubes are further bridged through [(UO2)4B(PO4)4]- clusters, forming an exceptional 3D open-framework structure. Its simplified cation network is a new 5-nodal net topological type such as {32.43.5.62.7.8}8{34.45.54.62}8{4.62.83}4{42.6}4{44.62}. Their facile hydrothermal synthetic routes, porous structure topology, thermal stability, and Raman spectroscopy properties are reported and discussed.

SrGe2B2O8 and Sr3Ge2B6O16: novel strontium borogermanates with three-dimensional and layered anionic architectures.

Two new alkaline-earth strontium borogermanates, namely, SrGe2B2O8 and Sr3Ge2B6O16, have been successfully synthesized through high-temperature solid state reactions. They represent the first examples of strontium borogermanates. SrGe2B2O8 crystallized in space group Pnma, and its structure features a novel three-dimensional [Ge2B2O8](2-) framework composed of alternative linkages of the B2O7 and Ge2O7 dimeric units with one-dimensional (1D) tunnels of eight-membered rings (MRs) along the b axis that are filled by the Sr(2+) cations. Sr3Ge2B6O16 is isostructural with Ba3Ge2B6O16 and crystallizes in centrosymmetric space group P1. Its structure features a two-dimensional layer that is composed of circular B6O16 clusters and GeO4 tetrahedra that are interconnected via corner sharing, forming 1D four- and six-MR tunnels along a axis. Sr(1) cations are located in the six-MR tunnels, whereas Sr(2) cations are located in the interlayer space. Studies of their optical properties and thermal stability as well as band structure calculations based on density functional theory methods have been also performed.

Fabrication of block copolymer brushes on hollow sphere surface via reverse iodine transfer polymerization.

The block copolymer brushes grafted from hollow sphere surface via reverse iodine transfer polymerization (RITP) were investigated in this work. A sufficient amount of azo initiator was introduced onto hollow sphere surface firstly. Then the monomer methyl methacrylate (MMA) was polymerized via surface-initiated reverse iodine transfer polymerization (RITP) using azo group modified hollow sphere as initiator. The microstructure of the samples was characterized by FT-IR, (1)H NMR, respectively. Results indicated that the poly(methyl methacrylate) (PMMA) with end functionality of alkyl iodine group had grafted from hollow sphere surface. TEM observations showed that the average diameter of hollow core was central at 1.3-1.4 µm and the average wall thickness increased from 103 nm to 138 nm and 172 nm after grafting polymerization of MMA and Tb complex, respectively. The closely linear plots of molecular weight (M(n)) versus conversion, linear kinetic plots for the free polymer formed in solution and the ability to extend the chains by sequential addition of monomer indicated that the RITP was a controlled process with a "living" characteristic.