RESUMO
3D bioprinting is an emerging biofabrication process for the production of adherent cell-based products, including engineered tissues and foods. While process innovations are rapidly occurring in the area of process monitoring, which can improve fundamental understanding of process-structure-property relations as well as product quality by closed-loop control techniques, in-line sensing of the bioink composition remains a challenge. Here, we report that hollow multifunctional fibers enable in-line impedimetric sensing of bioink composition and exhibit selectivity for real-time classification of cell type, viability, and state of differentiation during bioprinting. Continuous monitoring of the fiber impedance magnitude and phase angle response from 102 to 106 Hz during microextrusion 3D bioprinting enabled compositional and quality analysis of alginate bioinks that contained fibroblasts, neurons, or mouse embryonic stem cells (mESCs). Fiber impedimetric responses associated with the bioinks that contained differentiated mESCs were consistent with differentiation marker expression characterized by immunocytochemistry. 3D bioprinting through hollow multifunctional fiber impedimetric sensors enabled classification of stem cells as stable or randomly differentiated populations. This work reports an advance in monitoring 3D bioprinting processes in terms of in-line sensor-based bioink compositional analysis using fiber technology and provides a non-invasive sensing platform for achieving future quality-controlled bioprinted tissues and injectable stem-cell therapies.
Assuntos
Bioimpressão , Técnicas Biossensoriais , Impedância Elétrica , Impressão Tridimensional , Animais , Diferenciação Celular , Sobrevivência Celular , Eletrodos , Tinta , Camundongos , Camundongos Endogâmicos C57BL , Células NIH 3T3 , Células PC12 , Ratos , Transdução de Sinais , Células-Tronco/citologiaRESUMO
Here, a 3D printed multiplexed competitive migration assay is reported for characterizing a chemotactic response in the presence of multiple spatially distributed chemoattractants. The utility of the assay is demonstrated by examining the chemotactic response of human glioblastoma cells to spatially opposing chemotactic gradients of epidermal growth factor (EGF) and bradykinin (BK). Competitive migration assays involving spatially opposing gradients of EGF and BK that are optimized in the absence of the second chemoattractant show that 46% more glioblastoma cells migrate toward EGF sources. The migration velocities of human glioblastoma cells toward EGF and BK sources are reduced by 7.6 ± 2.2% and 11.6 ± 6.3% relative to those found in the absence of the spatially opposing chemoattractant. This work provides new insight to the chemotactic response associated with glioblastoma-vasculature interactions and a versatile, user-friendly platform for characterizing the chemotactic response of cells in the presence of multiple spatially distributed chemoattractants.
Assuntos
Ensaios de Migração Celular , Fatores Quimiotáticos/farmacologia , Quimiotaxia/efeitos dos fármacos , Impressão Tridimensional , Bradicinina/farmacologia , Linhagem Celular Tumoral , Ensaios de Migração Celular/instrumentação , Ensaios de Migração Celular/métodos , Fator de Crescimento Epidérmico/farmacologia , Desenho de Equipamento , Glioblastoma , Humanos , Técnicas Analíticas Microfluídicas/instrumentaçãoRESUMO
Interfacing anatomically conformal electronic components, such as sensors, with biology is central to the creation of next-generation wearable systems for health care and human augmentation applications. Thus, there is a need to establish computer-aided design and manufacturing methods for producing personalized anatomically conformal systems, such as wearable devices and human-machine interfaces (HMIs). Here, we show that a three-dimensional (3D) scanning and 3D printing process enabled the design and fabrication of a sensor-integrated anatomical human-machine interface (AHMI) in the form of personalized prosthetic hands that contain anatomically conformal electrode arrays for children affected by amniotic band syndrome, a common birth defect. A methodology for identifying optimal scanning parameters was identified based on local and global metrics of registered point cloud data quality. This method identified an optimal rotational angle step size between adjacent 3D scans. The sensitivity of the optimization process to variations in organic shape (i.e., geometry) was examined by testing other anatomical structures, including a foot, an ear, and a porcine kidney. We found that personalization of the prosthetic interface increased the tissue-prosthesis contact area by 408% relative to the non-personalized devices. Conformal 3D printing of carbon nanotube-based polymer inks across the personalized AHMI facilitated the integration of electronic components, specifically, conformal sensor arrays for measuring the pressure distribution across the AHMI (i.e., the tissue-prosthesis interface). We found that the pressure across the AHMI exhibited a non-uniform distribution and became redistributed upon activation of the prosthetic hand's grasping action. Overall, this work shows that the integration of 3D scanning and 3D printing processes offers the ability to design and fabricate wearable systems that contain sensor-integrated AHMIs.
Assuntos
Síndrome de Bandas Amnióticas , Membros Artificiais , Medicina de Precisão , Impressão Tridimensional , Interface Usuário-Computador , Dispositivos Eletrônicos Vestíveis , Criança , Humanos , MasculinoRESUMO
Polymer extrusion additive manufacturing processes, such as fused filament fabrication (FFF), are now being used to explore the fabrication of thin films and membranes. However, the physics of molten polymer extrusion constrains achievable thin film properties (e.g., mechanical isotropy), material selection, and spatial control of film composition. Herein, we present an approach for fabrication of functional polymer thin films and membranes based on the microextrusion printing of polymer solutions, which we refer to as "solvent-cast printing" (SCP). Constructs fabricated via SCP exhibited a 43% reduction in anisotropy of tensile strength relative to those fabricated using FFF. The constructs fabricated via SCP exhibited a lesser extent of visible layering defects relative to those fabricated by FFF. Further, the swelling dynamics of the films varied depending on the membrane fabrication technique (i.e., SCP vs manual drop casting). The opportunity for expanding material selection relative to FFF processes was demonstrated by printing poly(benzimidazole), a high-performance thermoplastic with high glass-transition temperatures ( Tg â¼ 400 °C). Results from this work indicate that our new approach could facilitate the manufacture of mechanically isotropic thin films and membranes using currently unprintable high-performance thermoplastics.
RESUMO
A bio-inspired hydrogel for 3D bioprinting of soft free-standing neural tissues is presented. The novel filler-free bioinks were designed by combining natural polymers for extracellular matrix biomimicry with synthetic polymers to endow desirable rheological properties for 3D bioprinting. Crosslinking of thiolated Pluronic F-127 with dopamine-conjugated (DC) gelatin and DC hyaluronic acid through a thiol-catechol reaction resulted in thermally gelling bioinks with Herschel-Bulkley fluid rheological behavior. Microextrusion 3D bioprinting was used to fabricate free-standing cell-laden tissue constructs. The bioinks exhibited flattened parabolic velocity profiles with tunable low shear regions. Two pathways were investigated for curing the bioink: chelation and photocuring. The storage modulus of the cured bioinks ranged from 6.7 to 11.7 kPa. The iron (III) chelation chemistry produced crosslinked neural tissues of relatively lower storage modulus than the photocuring approach. In vitro cell viability studies using the 3D bioprinted neural tissues showed that the cured bioink was biocompatible based on minimal cytotoxic response observed over seven days in culture relative to control studies using alginate hydrogels. Rodent Schwann cell-, rodent neuronal cell-, and human glioma cell-laden tissue constructs were printed and cultured over seven days and exhibited comparable viability relative to alginate bioink controls. The ability to fabricate soft, free-standing 3D neural tissues with low modulus has implications in the biofabrication of microphysiological neural systems for disease modeling as well as neural tissues and innervated tissues for regenerative medicine.
Assuntos
Biomimética , Hidrogéis/química , Tecido Nervoso/fisiologia , Neuroglia/fisiologia , Impressão Tridimensional , Animais , Bioimpressão , Encéfalo/fisiologia , Linhagem Celular Tumoral , Análise de Elementos Finitos , Humanos , Tinta , Transição de Fase , Poloxâmero/química , Ratos , Reologia , Temperatura , Engenharia TecidualRESUMO
Three-dimensional (3D) printing now enables the fabrication of 3D structural electronics and microfluidics. Further, conventional subtractive manufacturing processes for microelectromechanical systems (MEMS) relatively limit device structure to two dimensions and require post-processing steps for interface with microfluidics. Thus, the objective of this work is to create an additive manufacturing approach for fabrication of 3D microfluidic-based MEMS devices that enables 3D configurations of electromechanical systems and simultaneous integration of microfluidics. Here, we demonstrate the ability to fabricate microfluidic-based acoustofluidic devices that contain orthogonal out-of-plane piezoelectric sensors and actuators using additive manufacturing. The devices were fabricated using a microextrusion 3D printing system that contained integrated pick-and-place functionality. Additively assembled materials and components included 3D printed epoxy, polydimethylsiloxane (PDMS), silver nanoparticles, and eutectic gallium-indium as well as robotically embedded piezoelectric chips (lead zirconate titanate (PZT)). Electrical impedance spectroscopy and finite element modeling studies showed the embedded PZT chips exhibited multiple resonant modes of varying mode shape over the 0-20 MHz frequency range. Flow visualization studies using neutrally buoyant particles (diameter = 0.8-70 µm) confirmed the 3D printed devices generated bulk acoustic waves (BAWs) capable of size-selective manipulation, trapping, and separation of suspended particles in droplets and microchannels. Flow visualization studies in a continuous flow format showed suspended particles could be moved toward or away from the walls of microfluidic channels based on selective actuation of in-plane or out-of-plane PZT chips. This work suggests additive manufacturing potentially provides new opportunities for the design and fabrication of acoustofluidic and microfluidic devices.
Assuntos
Acústica , Dispositivos Lab-On-A-Chip , Sistemas Microeletromecânicos/instrumentação , Dimetilpolisiloxanos , Desenho de Equipamento , Impressão TridimensionalRESUMO
Additive manufacturing (AM) appears poised to provide novel pharmaceutical technology and controlled release systems, yet understanding the effects of processing and post-processing operations on pill design, quality, and performance remains a significant barrier. This paper reports a study of the relationship between programmed concentration profile and resultant temporal release profile using a 3D printed polypill system consisting of a Food and Drug Administration (FDA) approved excipient (Pluronic F-127) and therapeutically relevant dosages of three commonly used oral agents for treatment of type 2 diabetes (300-500 mg per pill). A dual-extrusion hydrogel microextrusion process enables the programming of three unique concentration profiles, including core-shell, multilayer, and gradient structures. Experimental and computational studies of diffusive mass transfer processes reveal that programmed concentration profiles are dynamic throughout both pill 3D printing and solidification. Spectrophotometric assays show that the temporal release profiles could be selectively programmed to exhibit delayed, pulsed, or constant profiles over a 5 h release period by utilizing the core-shell, multilayer, and gradient distributions, respectively. Ultimately, this work provides new insights into the mass transfer processes that affect design, quality, and performance of spatially graded controlled release systems, as well as demonstrating the potential to create disease-specific polypill technology with programmable temporal release profiles.
Assuntos
Impressão Tridimensional , Diabetes Mellitus Tipo 2 , Análise de Elementos Finitos , Humanos , Cinética , Poloxâmero/químicaRESUMO
The ability to interface microfluidic devices with native complex biological architectures, such as whole organs, has the potential to shift the paradigm for the study and analysis of biological tissue. Here, we show 3D printing can be used to fabricate bio-inspired conformal microfluidic devices that directly interface with the surface of whole organs. Structured-light scanning techniques enabled the 3D topographical matching of microfluidic device geometry to porcine kidney anatomy. Our studies show molecular species are spontaneously transferred from the organ cortex to the conformal microfluidic device in the presence of fluid flow through the organ-conforming microchannel. Large animal studies using porcine kidneys (n = 32 organs) revealed the profile of molecular species in the organ-conforming microfluidic stream was dependent on the organ preservation conditions. Enzyme-linked immunosorbent assay (ELISA) studies revealed conformal microfluidic devices isolate clinically relevant metabolic and pathophysiological biomarkers from whole organs, including heat shock protein 70 (HSP-70) and kidney injury molecule-1 (KIM-1), which were detected in the microfluidic device as high as 409 and 12 pg mL-1, respectively. Overall, these results show conformal microfluidic devices enable a novel minimally invasive 'microfluidic biopsy' technique for isolation and profiling of biomarkers from whole organs within a clinically relevant interval. This achievement could shift the paradigm for whole organ preservation and assessment, thereby helping to relieve the organ shortage crisis through increased availability and quality of donor organs. Ultimately, this work provides a major advance in microfluidics through the design and manufacturing of organ-conforming microfluidic devices and a novel technique for microfluidic-based analysis of whole organs.
Assuntos
Biomarcadores/metabolismo , Técnicas Analíticas Microfluídicas/instrumentação , Modelos Biológicos , Impressão Tridimensional , Técnicas de Cultura de Tecidos/instrumentação , Animais , Materiais Biomiméticos , Desenho de Equipamento , Feminino , Proteínas de Choque Térmico HSP70 , Receptor Celular 1 do Vírus da Hepatite A , Rim/metabolismo , Técnicas Analíticas Microfluídicas/métodos , SuínosRESUMO
Translational challenges associated with reductionist modeling approaches, as well as ethical concerns and economic implications of small animal testing, drive the need for developing microphysiological neural systems for modeling human neurological diseases, disorders, and injuries. Here, we provide a comprehensive review of microphysiological brain and neural systems-on-a-chip (NSCs) for modeling higher order trajectories in the human nervous system. Societal, economic, and national security impacts of neurological diseases, disorders, and injuries are highlighted to identify critical NSC application spaces. Hierarchical design and manufacturing of NSCs are discussed with distinction for surface- and bulk-based systems. Three broad NSC classes are identified and reviewed: microfluidic NSCs, compartmentalized NSCs, and hydrogel NSCs. Emerging areas and future directions are highlighted, including the application of 3D printing to design and manufacturing of next-generation NSCs, the use of stem cells for constructing patient-specific NSCs, and the application of human NSCs to 'personalized neurology'. Technical hurdles and remaining challenges are discussed. This review identifies the state-of-the-art design methodologies, manufacturing approaches, and performance capabilities of NSCs. This work suggests NSCs appear poised to revolutionize the modeling of human neurological diseases, disorders, and injuries.
Assuntos
Encéfalo/metabolismo , Descoberta de Drogas/instrumentação , Descoberta de Drogas/métodos , Dispositivos Lab-On-A-Chip , Doenças do Sistema Nervoso/tratamento farmacológico , Doenças do Sistema Nervoso/metabolismo , Animais , Encéfalo/patologia , Humanos , Doenças do Sistema Nervoso/patologiaRESUMO
This chapter reviews the design, fabrication, characterization, and application of piezoelectric-excited millimeter-sized cantilever (PEMC) sensors. The sensor transduction mechanism, sensing principle, and mode of operation are discussed. Bio-recognition strategies and surface functionalization methods for detection of DNA and RNA are discussed with a focus on self-assembly-based approaches. Methods for the verification of biosensor response via secondary binding assays, reversible binding assays, and the integration of complementary transduction mechanisms are presented. Sensing applications for medical diagnostics, food safety, and environmental monitoring are provided. PEMC sensor technology provides a robust platform for the real-time, label-free detection of DNA and RNA in complex matrices over nanomolar (nM) to attomolar (aM) concentration ranges.