Deciphering in-situ surface reconstruction in two-dimensional CdPS3 nanosheets for efficient biomass hydrogenation.

Steering on the intrinsic active site of an electrode material is essential for efficient electrochemical biomass upgrading to valuable chemicals with high selectivity. Herein, we show that an in-situ surface reconstruction of a two-dimensional layered CdPS3 nanosheet electrocatalyst, triggered by electrolyte, facilitates efficient 5-hydroxymethylfurfural (HMF) hydrogenation to 2,5-bis(hydroxymethyl)furan (BHMF) under ambient condition. The in-situ Raman spectroscopy and comprehensive post-mortem catalyst characterizations evidence the construction of a surface-bounded CdS layer on CdPS3 to form CdPS3/CdS heterostructure. This electrocatalyst demonstrates promising catalytic activity, achieving a Faradaic efficiency for BHMF reaching 91.3 ± 2.3 % and a yield of 4.96 ± 0.16 mg/h at - 0.7 V versus reversible hydrogen electrode. Density functional theory calculations reveal that the in-situ generated CdPS3/CdS interface plays a pivotal role in optimizing the adsorption of HMF* and H* intermediate, thus facilitating the HMF hydrogenation process. Furthermore, the reconstructed CdPS3/CdS heterostructure cathode, when coupled with MnCo2O4.5 anode, enables simultaneous BHMF and formate synthesis from HMF and glycerol substrates with high efficiency.

Theoretically Designed Cu10 Sn3 -Cu-SnOx as Three-Component Electrocatalyst for Efficient and Tunable CO2 Reduction to Syngas.

Electrocatalytic transformation of CO2 to various syngas compositions is an exceedingly attractive approach to carbon-neutral recycling. Meanwhile, the achievement of selectivity, stability, and tunability of product ratios using single-component electrocatalysts is challenging. Herein, the theoretically-assisted design of the triple-component nanocomposite electrocatalyst Cu10 Sn3 -Cu-SnOx that addresses this challenge is presented. It is shown that Cu10 Sn3 is a valuable electrocatalyst for suitable CO2 reduction to CO, SnO2 for CO2 reduction to formate at large overpotentials, and that the Cu-SnO2 interface facilitates H2 evolution. Accordingly, the interaction between the three functional components affords tunable CO/H2 ratios, from 1:2 to 2:1, of the produced syngas by controlling the applied potentials and relative contents of functional components. The syngas generation is selective (Faradaic efficiency, FE = 100%) at relatively lower cathodic potentials, whereas formate is the only liquid product detected at relatively higher cathodic potentials. The theoretically guided design approach therefore provides a new opportunity to boost the selectivity and stability of CO2 reduction to tunable syngas.

Activity Origin of the Nickel Cluster on TiC Support for Nonoxidative Methane Conversion.

Designing an active and selective catalyst for nonoxidative conversion of methane under mild conditions is critical for natural gas utilization as a chemical feedstock. Here, we demonstrate that the origin of the selective nonoxidative conversion of methane by the titanium carbide supported nickel cluster arises from the formation of a nickel carbide site under the reaction conditions, which could stabilize the CHx intermediate to facilitate the C-C coupling, but further coking is rather limited. The reaction mechanism reveals that the C2 products can be formed via a key -CHx-CH3 intermediate. In addition, we demonstrate that boration of the nickel cluster site can improve the methane conversion toward C2 products. That higher activity and selectivity from the moderate rise in d orbital energy levels can therefore be considered as a descriptor of the catalyst effectiveness. These findings provide an understanding of the dynamic behavior of the single nickel cluster toward methane conversion to C2 products and guidance for their future rational design.

Boosting the overall electrochemical water splitting performance of pentlandites through non-metallic heteroatom incorporation.

We report on synthesis of the heterotrimetallic pentlandite-type material Fe3Co3Ni3S8 (FCNS) in presence of suitable phosphorus-(FCNSP) and nitrogen-(FCNSN) donors for the overall electrochemical water splitting. Throughout the experiments, a preferential incorporation of N into the FCNS-lattice is observed whereas the addition of phosphorus generally leads to metal-phosphate-FCNS composites. The obtained FCNSP, FCNSN, and FCNSNP facilitate the oxygen evolution reaction (OER) at 100 mAcm-2 in 1.0M KOH with overpotentials of 479, 440, and 427 mV, respectively, outperforming the benchmark IrO2 (564 mV) and commercial Ni metal powder (>600 mV). Likewise, FCNSN and FCNSNP reveal an improved performance toward the hydrogen evolution reaction (HER) in 0.5M H2SO4, outperforming the pristine FCNS. All materials revealed high stability and morphological robustness during OER and HER. Notably, DFT calculation suggests that N and P doping boost the OER activity of the pristine FCNS, whereas N doping enhances the HER activity.

Scalable two-step annealing method for preparing ultra-high-density single-atom catalyst libraries.

The stabilization of transition metals as isolated centres with high areal density on suitably tailored carriers is crucial for maximizing the industrial potential of single-atom heterogeneous catalysts. However, achieving single-atom dispersions at metal contents above 2 wt% remains challenging. Here we introduce a versatile approach combining impregnation and two-step annealing to synthesize ultra-high-density single-atom catalysts with metal contents up to 23 wt% for 15 metals on chemically distinct carriers. Translation to a standardized, automated protocol demonstrates the robustness of our method and provides a path to explore virtually unlimited libraries of mono- or multimetallic catalysts. At the molecular level, characterization of the synthesis mechanism through experiments and simulations shows that controlling the bonding of metal precursors with the carrier via stepwise ligand removal prevents their thermally induced aggregation into nanoparticles. The drastically enhanced reactivity with increasing metal content exemplifies the need to optimize the surface metal density for a given application. Moreover, the loading-dependent site-specific activity observed in three distinct catalytic systems reflects the well-known complexity in heterogeneous catalyst design, which now can be tackled with a library of single-atom catalysts with widely tunable metal loadings.