RESUMO
The application of frontal polymerization to additive manufacturing has advantages in energy consumption and speed of printing. Additionally, with frontal polymerization, it is possible to print free-standing structures that require no supports. A resin was developed using a mixture of epoxies and vinyl ether with an iodonium salt and peroxide initiating system that frontally polymerizes through radical-induced cationic frontal polymerization. The formulation, which was optimized for reactivity, physical properties, and rheology, allowed the printing of free-standing structures. Increasing ratios of vinyl ether and reactive cycloaliphatic epoxide were found to increase the front velocity. Addition of carbon nanofibers increased the front velocity more than the addition of milled carbon fibers. The resin filled with carbon nanofibers and fumed silica exhibited shear-thinning behavior and was suitable for extrusion-based printing at a weight fraction of 4 wt %. A desktop 3D printer was modified to control resin extrusion and deposition with a digital syringe dispenser. Flexural properties of molded and 3D-printed specimens showed that specimens printed in the transverse direction exhibited the lowest strength, likely due to the presence of voids, adhesion issues between filaments, and preferential carbon nanofiber alignment along the filaments. Finally, free-standing printing of single, angled filaments and helical geometries was successfully demonstrated by coordinating ultraviolet-based reaction initiation, low air pressure for resin extrusion, and printing speed to match front velocity.
RESUMO
Various recent studies have shown that societal efforts to mitigate (e.g. "lockdown") the outbreak of the 2019 coronavirus disease (COVID-19) caused non-negligible impacts on the environment, especially air quality. To examine if interventional policies due to COVID-19 have had a similar impact in the US state of California, this paper investigates the spatiotemporal patterns and changes in air pollution before, during and after the lockdown of the state, comparing the air quality measurements in 2020 with historical averages from 2015 to 2019. Through time series analysis, a sudden drop and uptick of air pollution are found around the dates when shutdown and reopening were ordered, respectively. The spatial patterns of nitrogen dioxide (NO2) tropospheric vertical column density (TVCD) show a decreasing trend over the locations of major powerplants and an increasing trend over residential areas near interactions of national highways. Ground-based observations around California show a 38%, 49%, and 31% drop in the concentration of NO2, carbon monoxide (CO) and particulate matter 2.5 (PM2.5) during the lockdown (March 19-May 7) compared to before (January 26-March 18) in 2020. These are 16%, 25% and 19% sharper than the means of the previous five years in the same periods, respectively. Our study offers evidence of the environmental impact introduced by COVID-19, and insight into related economic influences.