RESUMO
This study analyzes the feasibility of utilizing the catalytic and enantioselective [4 + 2] cycloaddition of sterically demanding heterocycle-incorporated siloxydienes to yield polycyclic skeletons with a tetrasubstituted carbon. A catalyst derived from lanthanide triflimide enabled the reaction. The mechanistic investigations and transformations of the adducts are also discussed. The proposed approach facilitates the synthesis of intricate polysubstituted skeletons, each with multiple contiguous chiral centers, thereby aiding in the production of diverse hydrocarbazoles for drug discovery purposes.
RESUMO
Visible-luminescent lanthanide (LnL) complexes with a highly planar tetradentate ligand were successfully developed for a visible-light solid-state excitation system. L was designed by using two 2-hydroxy-3-(2-pyridinyl)-benzaldehyde molecules bridged by ethylenediamine, which was then coordinated to a series of Ln ions (Ln = Nd, Sm, Eu, Gd, Tb, Dy, and Yb). From the measurement of single-crystal X-ray analysis of EuL, two phenolic O atoms and two imine N atoms in L were coordinated to the Eu ion, and each π-electronic system took coplanar with the edged-pyridine moiety through an intramolecular hydrogen bond. The enol group on the phenolic skeleton changed to the keto form, and the pyridine was protonated. Thus, intramolecular proton transfer occurred in L after the complexation. Other complexes take isostructure. The space group is P-1, and the c-axis shrinks with decreasing temperature without a phase transition in EuL. The yellow color caused by the planar structure of L can sensitize ff emission by visible light, and the luminescence color of each complex depends on central Ln ions. Furthermore, a phosphorescence band also appeared at rt with ff emission in LnL. Drastic temperature dependence of luminescence was clarified quantitatively.
RESUMO
A chiral Eu(III) coordination polymer with phase-transition behavior, [Eu(+tfc)3(m-dpeb)]n, (+tfc: (+)-3-trifluoroacetylcamphorato, m-dpeb: 1,3-bis(diphenylphosphorylethynyl)benzene) was reported for understanding the effect of polymer chain arrangement (orientation effect) on the circularly polarized luminescence (CPL) in a solid system. The phase-transition behavior of the transformable Eu(III) coordination polymer was characterized using differential scanning calorimetry and powder X-ray diffraction. The Eu(III) coordination polymer exhibited phase transition at approximately 180 °C. The magnitude of the CPL intensity was drastically changed because of the phase transition, without coordination geometrical change around the Eu(III) ion. In this study, the orientation effect of a chiral Eu(III) coordination polymer on the CPL properties in crystalline solid is demonstrated.
Assuntos
Európio , Luminescência , Dicroísmo Circular , Európio/química , Polímeros/química , EstereoisomerismoRESUMO
The synthesis of [M(dimphen)(NCS)2] (1; M = FeII), (2; M = CoII), (3; M = MnII) and [Fe(dimphen)(NCSe)2] (4), where dimphen = [1,2-bis(9-methyl-1,10-phenanthrolin-2-yl)ethane], are reported. The crystal packing structures of 1-3, show intermolecular π-π stacking and NCSSCN interactions. The complex 1 shows ferromagnetic interaction, and the complex 2 displays single-molecular magnet behaviour.
RESUMO
Electrofluorochromism owing to redox reactions on the center europium (Eu) ion in ionic liquids is examined for the helicate complexes (abbreviated as EuL) with a hexadentate pyridine derivative. Typical electrofluorochromism requires extra electroactive units complementing intra- or intermolecular energy transfer to quench fluorophores. Herein, an unprecedentedly simplified electrofluorochromic system overcoming such issues is demonstrated by utilizing reversible electrochemistry of EuL between Eu3+ and Eu2+, which accompanies large emission transition. A three-electrode electrochemical switching device is facilely prepared with an ionic liquid [BMIM][PF6] and EuL mixture. Benefiting from the stable helical coordinated structure of the ligand in [BMIM][PF6], highly enhanced red fluorescence of EuL with small quantity (≤1 wt %) is utilized. Rapid response and large contrast of luminescence are achieved: the emission is drastically quenched at the reduced state (Eu2+) and it is successfully restored by subsequent oxidation (Eu3+). The reversible fluctuation of excitation and emission spectra of an electrofluorochromic device is achieved in the potential window within ±2 V. The device affords excellent optoelectric properties in terms of well-controlled luminescence switching depending on the applied potentials and its durability. This work paves an efficient and smart way toward Eu luminescence control in optoelectronic devices.
RESUMO
We structurally and spectroscopically investigated a series of praseodymium (Pr) complexes with eight ligands that form helicate molecular structures. The mother ligand skeleton (L) has two bipyridine moieties bridged with ethylenediamine. The bridged skeleton of PrL was changed to diamines 1-methyl-ethylenediamine, trimethylenediamine and 2,2'-dimethyl-trimethylenediamine, and the corresponding ligands were designated as Lme, Lpr and Ldmpr, for each Pr in these complexes upon UV-excitation. The luminescence quantum yields of PrL and PrLpr in the visible and near infrared (NIR) regions indicate that PrL is excited by both the electronic state of the ligand and the ff absorption band, whereas PrLpr is excited through the ligand. The addition of a methyl group to PrL and PrLpr has a different effect on the Pr emission intensity with the intensity of PrLme decreasing more than that of PrL and PrLdmpr and increasing more than that of PrLpr. Thus, the coordination of Pr and the increased rigidity of the ligand upon methylation enhance luminescence. The azomethine moieties on Lme, Lpr and Ldmpr were reduced and formed the corresponding PrLH, PrLmeH, PrLprH and PrLdmprH complexes. The luminescence of the non-methylated series is due to transitions related to the 1D2 level and thus the methylated series luminesces due to high energy levels such as 3PJ arising from the shortened π electronic systems. We also discuss the strong red emission of a series of Eu complexes with eight ligands from the viewpoint of their molecular structures and luminescence efficiencies and evaluate the Judd-Ofelt parameters from the luminescence spectra of Eu complexes.
RESUMO
The formation of plastic or brittle organic crystals of salen derivatives that depend on the solvents employed for crystallization is demonstrated. Large yellow crystals (ranging from mm to cm size) of ten different salen derivatives were obtained and investigated. Among them, (bis(2-hydroxyacetophenone)ethylenediimine) 2, which was recrystallized from dichloromethane, tetrahydrofuran or chloroform, exhibited plastic deformation behaviour when mechanical force was applied to the (001) face. In contrast, when 2 was recrystallized from benzene, brittle crystals were obtained. Face indexing confirmed that different crystal faces were obtained by depending on the solvent employed for recrystallization, which leads to either flexible (plastic) or brittle crystals. Photoluminescence with a band maximum at 510â nm and thermochromism related to tautomerism between OH and NH forms were also investigated, and indicate that 2 is a flexible organic single-crystal material with multifunctional properties.
RESUMO
The objective of this study was to elucidate the underlying cardiotoxic mechanism of milrinone, a cAMP phosphodiesterase 3 inhibitor, by evaluating cardiac functions, blood biomarkers including cardiac troponin I (cTnI), microRNAs (miR-1, miR-133a and miR-499a) and various endogenous metabolites, and histopathology in conscious cynomolgus monkeys. Milrinone at doses of 0, 3 and 30 mg/kg were orally administered to monkeys (n = 3-4/group), and the endpoints were evaluated 1 to 24 h post-dosing. Milrinone caused myocardial injuries characterized by myocardial degeneration/necrosis, cell infiltration and hemorrhage 24 h after drug administration. Cardiac functional analysis revealed that milrinone dose-dependently increased the maximum upstroke velocity of the left ventricular pressure and heart rate, and decreased the QA interval and systemic blood pressure 1-4 h post-dosing, being associated with pharmacological action of the drug. In the blood biomarker analysis, only plasma cTnI was dose-dependently increased 4-7 h after drug administration, suggesting that cTnI is the most sensitive biomarker for early detection of milrinone-induced myocardial injuries. In the metabolomics analysis, high dose of milrinone induced transient changes in lipid metabolism, amino acid utilization and oxidative stress, together with the pharmacological action of increased cAMP and lipolysis 1 h post-dosing before the myocardial injuries were manifested by increased cTnI levels. Taken together, milrinone showed acute positive inotropic and multiple metabolic changes including excessive pharmacological actions, resulting in myocardial injuries. Furthermore, a comprehensive analysis of cardiac functions, blood biomarkers and histopathology can provide more appropriate information for overall assessment of preclinical cardiovascular safety.
Assuntos
Traumatismos Cardíacos/induzido quimicamente , Coração/efeitos dos fármacos , Coração/fisiopatologia , Milrinona/farmacologia , Milrinona/toxicidade , Animais , Biomarcadores , Cardiotoxicidade , Feminino , Testes de Função Cardíaca , Macaca fascicularis , Masculino , Metabolômica , Milrinona/sangue , Modelos Animais , Miocárdio/patologiaRESUMO
Ligands based on 2,2'-bipyridine and valinamide moieties induce circularly polarized luminescence in their europium complexes. Both the R and S enantiomers of the complexes were successfully obtained. Single-crystal X-ray analysis of the racemic crystal confirmed that the ligand is coordinated to the europium ion in a tetradentate fashion. The π-electronic system of the ligand is co-planar with the valinamide moiety, and acts as an efficient photoantenna to sensitize europium luminescence by UV excitation. The luminescence quantum yield (QY) of europium in the valinamide-containing complex was 44 % in acetonitrile. The glum value to evaluate the circularly polarized luminescence was relatively high at |0.13| estimated from their magnetic dipole transitions around 593â nm. For comparison, we prepared hexadentate europium complexes in the S- and R-forms derived from two bipyridine moieties linked by ethylenediamines. The determined QYs were 18 % (S) and 16 % (R), and the glum value |0.12| for the hexadentate complexes. The photophysical properties of the gadolinium complexes of the ligands were also evaluated.
RESUMO
Oligomeric-brush chains of helical lanthanide (Ln) complexes retain their structural and luminescent behavior after coating onto magnetic nanoparticles (MNPs) consisting of Fe3O4 covered with silicate. It is one of the type of bifunctional NPs exhibiting luminescence of Ln and superparamagnetism of Fe3O4. In comparison to a simple monolayer of complexes adsorbed on a modified surface, a layer made of luminescent chains allowed us to obtain a more intensive red/green luminescence originating from Eu3+/Tb3+ ions, and at the same time, no visible increase in particle size (compared to Fe3O4@silica particles) was observed. The luminescent properties of the Tb3+ complex were altered by MNPs; the decrease of the luminescence was not as large as expected, the excitation spectrum changed significantly, and the average luminescence lifetime was much longer at room temperature. Surprisingly, this phenomenon was not observed at 77 K and also did not occur for the Eu3+ complexes. The possibility to stack building blocks in a chain using complexes of different lanthanide ions can be used to design novel multifunctional nanosystems.
RESUMO
Lanthanide (Ln) based luminescent materials are experiencing an increasing interest in their applications in several fields. In this study, we report a series of new lanthanide-oligomeric brush films, supported on quartz substrates and prepared using a layer-by-layer method (LbL). Oligomeric brush films are composed of small oligomers from our previously reported coordination polymers [x-EuL] and [x-TbL] (with x = 1, 3, and 5 generations of Ln complexes), which are grown perpendicularly from a carboxylate self-assembled monolayer. Oligomers composed of our previously described helical lanthanide complex LnL (Ln: Eu and Tb) as a luminescent moiety and benzene-1,4-dicarboxylate acid (bdc) used as a linker. Mixed films having the fifth-generation Ln complexes composed of equimolar mixture of Eu and Tb ions were prepared. Oligomeric brush films are highly transparent and exhibited a colored emission under UV irradiation. Pure Ln (Eu or Tb) films showed a strong luminescence from the Ln ions. Their luminescent properties depended on the number of lanthanide layers in the films composed of the first to third generations of lanthanide complexes. Then, the increase of the complex layers induced no difference in the luminescent properties. An energy transfer from Tb to Eu ions in the mixed films indicated a short distance between lanthanide ions of a fifth layer. The structural analysis together with the observed luminescent properties and some previous studies allowed to clarify the disposition of the oligomers in the films.
RESUMO
Multicolor upconversion luminescence of Er3+ was successfully enhanced by optimizing the interface in dye-coordinated nanoparticles with a core/shell structure. Red and green upconversion emissions of Er3+ were obtained at the interface of oxide nanoparticles via the intramolecular energy transfer from the coordinating squaraine dye with high light-absorption ability, which was more efficient than emissions through the energy transfer from metal ions such as Yb3+. Additionally, CaF2 nanoparticles as a core material minimized the energy loss with nonradiative downward relaxations in Er3+, resulting in the observation of unusual blue upconversion emissions from the upper energy level of Er3+ by nonlaser excitation using a continuous-wave (CW) Xe lamp at an excitation power of 1.2 mW/cm2.
RESUMO
A new material concept of soft crystals is proposed. Soft crystals respond to gentle stimuli such as vapor exposure and rubbing but maintain their structural order and exhibit remarkable visual changes in their shape, color, and luminescence. Various interesting examples of soft crystals are introduced in the article. By exploring the interesting formation and phase-transition phenomena of soft crystals through interdisciplinary collaboration, new materials having both the characteristics of ordered hard crystals and those of flexible soft matter are expected.
RESUMO
Gel formations and efficient lanthanide luminescence appeared in deuterium oxide (D2O) medium instead of light water (H2O), and their solvation possibilities by using luminescence lifetimes were discussed. The lanthanide ions in the hydrogel of 1 obtained by H2O (abbreviated as H2O-Ln1; Ln = Eu, Tb, and Gd) in our previous report act as the coupling part between neighbor molecules for the bundle structure. Here, D2O also acts as a medium to form the lanthanide-hydrogel of 1, and increases intensities of luminescence for Tb, because a soft crystalline state reducing resonance thermal relaxation is realized. The gel-formation and luminescence band positions of Ln1 in D2O corresponded to those in H2O. From the observation of luminescence lifetimes in H2O and D2O, the number of coordinating water molecules on Eu and Tb were estimated to be around 3 or 4 for both. The luminescence intensity of Eu1 did not increase even in D2O, due to a blue shift of the excited triplet state of 1, as compared to that in H2O.
RESUMO
A [7]helicene bis-ruthenium complex, with one ruthenium atom bound to the cyclopentadienyl (Cp) ring and the other coordinated to the arene ring at the edge of the helicene, was synthesized. This complex showed phosphorescence both in butyronitrile (Φ=31 %, 77â K) and in the solid state (Φ=18 %, 77â K). The two non-equivalent ruthenium metal atoms, attached to the helicene ligand, interact with each other upon photoabsorption and emission.
RESUMO
Bacillus subtilis offers a platform for giant DNA synthesis, which is mediated by the connection of overlapping DNA segments called domino DNA, in the cloning locus of the host. The domino method was successfully used to produce DNA fragments as large as 3500 kbp. However, domino DNA is limited to <100 kbp because of size restrictions regarding the transformation (TF) of B. subtilis competent cells. A novel conjugal transfer (CT) method was designed to eliminate the TF size limit. The CT method enables rapid and efficient domino reactions in addition to the transfer of giant DNA molecules of up to 875 kbp to another B. subtilis genome within 4 hours. The combined use of the TF and CT should enable significantly rapid giant DNA production.
Assuntos
Bacillus subtilis/genética , DNA/genética , Transformação Genética , Clonagem Molecular/métodos , Replicação do DNA , Genoma BacterianoRESUMO
Five Eu complexes with long alkyl chain groups, abbreviated as EuLCx ("x" indicates the number of methylene groups: x = 8, 12, 14, 18, and 22), were synthesized to evaluate their structural and luminescence properties in chloroform. The mother helicate Eu complex, EuL, which has two bipyridine moieties bridged by an ethylenediamine, has been previously reported. A reduced form in which the azomethine groups of L also coordinated to the Eu ion, EuLH, was newly prepared. EuLH also adopts a helicate molecular structure based on single crystal X-ray structural analysis. The amine hydrogens of the bridging ethylenediamine of LH are active sites for substitution and were exchanged with five different alkyl chains to form EuLCx. Luminescence band positions and shapes of EuLCx in chloroform were completely identical, with a quantum yield of 37.1 ± 1.2 and a lifetime of around 1.25 ms. This indicates that the environments surrounding the Eu ion in the various complexes are all similar. Luminescence quantum yields of TbLH and TbLC18 are also strengthened, 48.7% in acetonitrile and 55% in chloroform, respectively. Potential energy surfaces were also described by using density functional theory, suggesting the possibility of a 1 : 2 complex of Eu and the ligand as a main luminescent species in solutions. This 1 : 2 complexation forms Eu-oxygen coordination using acyl groups. It indicates that the acyl group modification results in a different structure from the mother complexes.
RESUMO
Incorporating palladium in the first coordination sphere of acetato-bridged lanthanoid complexes, [Pd2 Ln2 (H2 O)2 (AcO)10 ]â 2 AcOH (Ln=Gd (1), Y (2), Gd0.4 Y1.6 (3), Eu (4)), led to significant bonding interactions between the palladium and the lanthanoid ions, which were demonstrated by experimental and theoretical methods. We found that electron density was donated from the d8 Pd2+ ion to Gd3+ ion in 1 and 3, leading to the observed slow magnetic relaxation by using local orbital locator (LOL) and X-ray absorption near-edge structure (XANES) analysis. Field-induced dual slow magnetic relaxation was observed for 1 up to 20â K. Complex 3 and frozen aqueous and acetonitrile solutions of 1 showed only one relaxation peak, which confirms the role of intermolecular dipolar interactions in slowing the magnetic relaxation of 1. The slow magnetic relaxation occurred through a combination of Orbach and Direct processes with the highest pre-exponential factor (τo =0.06â s) reported so far for a gadolinium complex exhibiting slow magnetic relaxation. The results revealed that transition metal-lanthanoid (TM-Ln) axial interactions indeed could lead to new physical properties by affecting both the electronic and magnetic states of the compounds.
RESUMO
Bacillus subtilis 168 was developed as a genome vector to manipulate large DNA fragments. The system is based on the inherent natural transformation (TF) activity. However, DNA size transferred by TF is limited up to approximately 100 kb. A conjugal transfer system capable of transferring DNA fragments considerably larger than those transferred by TF was developed. A well-defined oriT110 sequence and a cognate relaxase gene from the pUB110 plasmid were inserted into the xkdE gene of the B. subtilis genome. Transfer of antibiotic resistance markers distant from the oriT110 locus to the recipient B. subtilis occurred only in the presence of pLS20, a helper plasmid that provides a type IV secretion system. Marker transmission was consistent with the orientation of oriT110 and required a recA-proficient recipient. The first conjugal transfer system of genomic DNA should provide a valuable alternative genetic tool for editing the B. subtilis genome.
Assuntos
Bacillus subtilis/genética , Conjugação Genética/genética , Técnicas de Transferência de Genes , Recombinação Genética/genética , Bacillus subtilis/efeitos dos fármacos , Resistência Microbiana a Medicamentos/genética , Genes Bacterianos/genética , Plasmídeos/genéticaRESUMO
A simple device structure composed of an interfacial Eu2+/3+ complex on a mesoporous TiO2 film is developed by a solution process and acts as the high-performance photodetector with photomultiplication phenomena. The electron transfer from the photoexcited organic ligand, 2,2':6',2â³-terpyridine (terpy), as a photosensitizer to TiO2 is accelerated by the reduction level of Eu3+/2+ ions chemically bonding among terpy and TiO2, resulting in the generation of a large photocurrent. It is worth noting that its external quantum efficiency is in excess of 105% under applied reverse bias. The corresponding responsivity of the device is also determined to be 464 A/W at an irradiation light intensity of 0.7 mW/cm2 (365 nm), which is more than 3 orders of magnitude larger than those of inorganic photodetectors. A dark current of the device can be reduced to 10-9 A/cm2 by introducing a Eu oxide thin-film layer as a carrier blocking layer at the interface between transparent conducting oxide (TCO) and the TiO2 layer, and the specific detectivity reaches 5.2 × 1015 jones at 365 nm with -3 V. The performance of our organic-inorganic hybrid photodetector surpasses those of existing ultraviolet photodetectors.