RESUMO
Ethylene oxide (EtO) is a colorless, flammable, reactive gas commonly used for sterilization and chemical manufacturing. It has become a contaminant of concern for the United States Environmental Protection Agency (USEPA) due to an assessment of its toxicity, which found that EtO is more potent than had been previously understood and which also revised the weight-of-evidence classification of EtO from "probably carcinogenic" to "carcinogenic to humans". With the revised toxicity assessment came findings of increased cancer risk to communities near some facilities that emit EtO to ambient air, including communities with environmental justice (EJ) concerns. To address EtO, the USEPA has conducted intensive research in recent years, centering its attention on measurement and sampling technology development, as well as monitoring of EtO in source emissions, near-source air, and atmospheric environments to further support science-based policy and regulations that reduce harmful impacts to human health. Research efforts by government, academic, and commercial institutions have resulted in the development of novel measurement and monitoring techniques, which has led to more robust characterization of EtO emissions and atmospheric levels across a wide range of concentrations, including trace levels (ppt). This Perspective covers the importance of capturing high quality, analytical measurements of EtO, what is known so far about these measurement technologies, EPA's response to the increasing concerns of EtO contamination, what still needs to be accomplished on the air quality front, and a focus on USEPA research and development moving forward.
RESUMO
Globally, billions of people burn fuels indoors for cooking and heating, which contributes to millions of chronic illnesses and premature deaths annually. Additionally, residential burning contributes significantly to black carbon emissions, which have the highest global warming impacts after carbon dioxide and methane. In this study, we use Fourier transform infrared spectroscopy (FTIR) to analyze fine-particulate emissions collected on Teflon membrane filters from 15 cookstove types and 5 fuel types. Emissions from three fuel types (charcoal, kerosene, and red oak wood) were found to have enough FTIR spectral response for functional group (FG) analysis. We present distinct spectral profiles for particulate emissions of these three fuel types. We highlight the influential FGs constituting organic carbon (OC) using a multivariate statistical method and show that OC estimates by collocated FTIR and thermal-optical transmittance (TOT) are highly correlated, with a coefficient determination of 82.5 %. As FTIR analysis is fast and non-destructive and provides complementary FG information, the analysis method demonstrated herein can substantially reduce the need for thermal-optical measurements for source emissions.
RESUMO
Combustion of mixed materials during open air burning of refuse or structural fires in the wildland urban interface produces emissions that worsen air quality, contaminate rivers and streams, and cause poor health outcomes including developmental effects. The zebrafish, a freshwater fish, is a useful model for quickly screening the toxicological and developmental effects of agents in such species and elicits biological responses that are often analogous and predictive of responses in mammals. The purpose of this study was to compare the developmental toxicity of smoke derived from the burning of 5 different burn pit-related material types (plywood, cardboard, plastic, a mixture of the three, and the mixture plus diesel fuel as an accelerant) in zebrafish larvae. Larvae were exposed to organic extracts of increasing concentrations of each smoke 6-to-8-hr post fertilization and assessed for morphological and behavioral toxicity at 5 days post fertilization. To examine chemical and biological determinants of toxicity, responses were related to emissions concentrations of polycyclic hydrocarbons (PAH). Emissions from plastic and the mixture containing plastic caused the most pronounced developmental effects, including mortality, impaired swim bladder inflation, pericardial edema, spinal curvature, tail kinks, and/or craniofacial deformities, although all extracts caused concentration-dependent effects. Plywood, by contrast, altered locomotor responsiveness to light changes to the greatest extent. Some morphological and behavioral responses correlated strongly with smoke extract levels of PAHs including 9-fluorenone. Overall, the findings suggest that material type and emissions chemistry impact the severity of zebrafish developmental toxicity responses to burn pit-related smoke.
RESUMO
Wildland fires contribute significantly to the ambient air pollution burden worldwide, causing a range of adverse health effects in exposed populations. The toxicity of woodsmoke, a complex mixture of gases, volatile organic compounds, and particulate matter, is commonly studied in vitro using isolated exposures of conventionally cultured lung cells to either resuspended particulate matter or organic solvent extracts of smoke, leading to incomplete toxicity evaluations. This study aimed to improve our understanding of the effects of woodsmoke inhalation by building an advanced in vitro exposure system that emulates human exposure of the airway epithelium. We report the development and characterization of an innovative system that permits live-cell monitoring of the intracellular redox status of differentiated primary human bronchial epithelial cells cultured at an air-liquid interface (pHBEC-ALI) as they are exposed to unfractionated woodsmoke generated in a tube furnace in real time. pHBEC-ALI exposed to freshly generated woodsmoke showed oxidative changes that were dose-dependent and reversible, and not attributable to carbon monoxide exposure. These findings show the utility of this novel system for studying the molecular initiating events underlying woodsmoke-induced toxicity in a physiologically relevant in vitro model, and its potential to provide biological plausibility for risk assessment and public health measures.
Assuntos
Poluição do Ar , Material Particulado , Humanos , Material Particulado/toxicidade , Fumaça/efeitos adversos , Pulmão , Células EpiteliaisRESUMO
BACKGROUND: Open burning of anthropogenic sources can release hazardous emissions and has been associated with increased prevalence of cardiopulmonary health outcomes. Exposure to smoke emitted from burn pits in military bases has been linked with respiratory illness among military and civilian personnel returning from war zones. Although the composition of the materials being burned is well studied, the resulting chemistry and potential toxicity of the emissions are not. METHODS: Smoke emission condensates from either flaming or smoldering combustion of five different types of burn pit-related waste: cardboard; plywood; plastic; mixture; and mixture/diesel, were obtained from a laboratory-scale furnace coupled to a multistage cryotrap system. The primary emissions and smoke condensates were analyzed for a standardized suite of chemical species, and the condensates were studied for pulmonary toxicity in female CD-1 mice and mutagenic activity in Salmonella (Ames) mutagenicity assay using the frameshift strain TA98 and the base-substitution strain TA100 with and without metabolic activation (S9 from rat liver). RESULTS: Most of the particles in the smoke emitted from flaming and smoldering combustion were less than 2.5 µm in diameter. Burning of plastic containing wastes (plastic, mixture, or mixture/diesel) emitted larger amounts of particulate matter (PM) compared to other types of waste. On an equal mass basis, the smoke PM from flaming combustion of plastic containing wastes caused more inflammation and lung injury and was more mutagenic than other samples, and the biological responses were associated with elevated polycyclic aromatic hydrocarbon levels. CONCLUSIONS: This study suggests that adverse health effects of burn pit smoke exposure vary depending on waste type and combustion temperature; however, burning plastic at high temperature was the most significant contributor to the toxicity outcomes. These findings will provide a better understanding of the complex chemical and combustion temperature factors that determine toxicity of burn pit smoke and its potential health risks at military bases.
Assuntos
Poluentes Atmosféricos , Material Particulado , Poluentes Atmosféricos/análise , Poluentes Atmosféricos/toxicidade , Animais , Feminino , Incineração , Pulmão , Camundongos , Testes de Mutagenicidade , Mutagênicos , Material Particulado/toxicidade , RatosRESUMO
In 2018, the International Organization for Standardization (ISO) 19867-1 "Harmonized laboratory test protocols" were released for establishing improved quality and comparability for data on cookstove air pollutant emissions, efficiency, safety, and durability. This is the first study that compares emissions [carbon dioxide, carbon monoxide, total hydrocarbons, methane, nitrogen oxides, fine particulate matter (PM2.5), organic carbon, elemental carbon, and ultrafine particles] and efficiency data between the ISO protocol and the Water Boiling Test (WBT). The study examines six stove/fuel combinations [liquefied petroleum gas (LPG), pellet, wood fan, wood rocket, three stone fire, and charcoal] tested in the same US EPA laboratory. Evaluation of the ISO protocol shows improvements over previous test protocols and that results are relatively consistent with former WBT data in terms of tier ratings for emissions and efficiency, as defined by the ISO 19867-3 "Voluntary Performance Targets." Most stove types remain similarly ranked using ISO and WBT protocols, except charcoal and LPG are in higher PM2.5 tiers with the ISO protocol. Additionally, emissions data including polycyclic aromatic hydrocarbons are utilized to compare between the ISO and Firepower Sweep Test (FST) protocols. Compared to the FST, the ISO protocol results in generally higher PM2.5 tier ratings.
Assuntos
Poluentes Atmosféricos , Poluição do Ar em Ambientes Fechados , Utensílios Domésticos , Poluentes Atmosféricos/análise , Poluição do Ar em Ambientes Fechados/análise , Culinária , Material Particulado/análise , Padrões de ReferênciaRESUMO
Trace-level environmental data typically include values near or below detection and quantitation thresholds where health effects may result from low-concentration exposures to one chemical over time or to multiple chemicals. In a cook stove case study, bias in dibenzo[a,h]anthracene concentration means and standard deviations (SDs) was assessed following censoring at thresholds for selected analysis approaches: substituting threshold/2, maximum likelihood estimation, robust regression on order statistics, Kaplan-Meier, and omitting censored observations. Means and SDs for gas chromatography-mass spectrometry-determined concentrations were calculated after censoring at detection and calibration thresholds, 17% and 55% of the data, respectively. Threshold/2 substitution was the least biased. Measurement values were subsequently simulated from two log-normal distributions at two sample sizes. Means and SDs were calculated for 30%, 50%, and 80% censoring levels and compared to known distribution counterparts. Simulation results illustrated (1) threshold/2 substitution to be inferior to modern after-censoring statistical approaches and (2) all after-censoring approaches to be inferior to including all measurement data in analysis. Additionally, differences in stove-specific group means were tested for uncensored samples and after censoring. Group differences of means tests varied depending on censoring and distributional decisions. Investigators should guard against censoring-related bias from (explicit or implicit) distributional and analysis approach decisions.
Assuntos
Modelos Estatísticos , Projetos de Pesquisa , Viés , Simulação por ComputadorRESUMO
N-containing aromatic compounds (NACs) are an important group of light-absorbing molecules in the atmosphere. They are often observed in combustion emissions, but their chemical formulas and structural characteristics remain uncertain. In this study, red oak wood and charcoal fuels were burned in cookstoves using the standard water boiling test (WBT) procedure. Submicron aerosol particles in the cookstove emissions were collected using quartz (Q f ) and polytetrafluoroethylene (PTFE) filter membranes positioned in parallel. A back-up quartz filter (Q b ) was also installed downstream of the PTFE filter to evaluate the effect of sampling artifact on NACs measurements. Liquid chromatography-mass spectroscopy (LC-MS) techniques identified seventeen NAC chemical formulas in the cookstove emissions. The average concentrations of total NACs in Q b samples (0.37 ± 0.31 - 1.79 ± 0.77 µg m-3) were greater than 50% of those observed in the Q f samples (0.51 ± 0.43 - 3.91 ± 2.06 µg m-3), and the Q b to Q f mass ratios of individual NACs had a range of 0.02 - 2.71, indicating that the identified NACs might have substantial fractions remaining in the gas-phase. In comparison to other sources, cookstove emissions from red oak or charcoal fuels did not exhibit unique NAC structural features, but had distinct NACs composition. However, before identifying NACs sources by combining their structural and compositional information, the gas-particle partitioning behaviors of NACs should be further investigated. The average contributions of total NACs to the light absorption of organic matter at λ = 365 nm (1.10 - 2.57%) in Q f and Q b samples (10.7 - 21.0%) are up to 10 times larger than their mass contributions (Q f 0.31 - 1.01%, Q b 1.08 - 3.31%), so the identified NACs are mostly strong light absorbers. To explain more sample extracts absorption, future research is needed to understand the chemical and optical properties of high molecular weight (e.g., MW > 500 Da) entities in particulate matter.
RESUMO
This study seeks to understand the compositional details of N-containing aromatic compounds (NACs) emitted during biomass burning (BB) and their contribution to light-absorbing organic carbon (OC), also termed brown carbon (BrC). Three laboratory BB experiments were conducted with two U.S. pine forest understory fuels typical of those consumed during prescribed fires. During the experiments, submicron aerosol particles were collected on filter media and subsequently extracted with methanol and examined for their optical and chemical properties. Significant correlations (p < 0.05) were observed between BrC absorption and elemental carbon (EC)/OC ratios for individual burns data. However, the pooled experimental data indicated that the BB BrC absorption depends on more than the BB fire conditions as represented by the EC/OC ratio. Fourteen NAC formulas were identified in the BB samples, most of which were also observed in simulated secondary organic aerosol (SOA) from photo-oxidation of aromatic VOCs with NOX. However, the molecular structures associated with the identical NAC formula from BB and SOA are different. In this work, the identified NACs from BB are featured by methoxy and cyanate groups, and are predominately generated during the flaming phase. The mass concentrations of identified NACs were quantified using authentic and surrogate standards, and their contributions to bulk light absorption of solvent extractable OC were also calculated. The contributions of identified NACs to organic matter (OM) and BrC absorption were significantly higher in flaming-phase samples than those in smoldering-phase samples, and correlated with EC/OC ratio (p < 0.05) for both individual burns and pooled experimental data, indicating that the formation of NACs from BB largely depends on burn conditions. The average contributions of identified NACs to overall BrC absorption at 365 nm ranged from 0.087 ± 0.024 to 1.22 ± 0.54%, 3 - 10 times higher than their mass contributions to OM (0.023 ± 0.0089 to 0.18 ± 0.067%), so the NACs with light absorption identified in this work from BB are likely strong BrC chromophores. Further studies are warranted to identify more light-absorbing compounds to explain the unknown fraction (> 98%) of BB BrC absorption.
RESUMO
The characteristics of wildland fire smoke exposures which initiate or exacerbate cardiopulmonary conditions are unclear. We previously reported that, on a mass basis, lung toxicity associated with particulate matter (PM) from flaming smoke aspirated into mouse lungs is greater than smoldering PM. In this study, we developed a computer-controlled inhalation system which can precisely control complex biomass smoke emissions from different combustion conditions. This system was used to examine the toxicity of inhaled biomass smoke from peat, eucalyptus, and oak fuels generated under smoldering and flaming phases with emissions set to the same approximate concentration of carbon monoxide (CO) for each exposure (60-110 ppm), resulting in PM levels of ~ 4 mg/m3 for flaming and ~ 40 mg/m3 for smoldering conditions. Mice were exposed by inhalation 1 h/day for 2 days, and assessed for lung toxicity at 4 and 24 h after the final exposure. Peat (flaming and smoldering) and eucalyptus (smoldering) smoke elicited significant inflammation (neutrophil influx) in mouse lungs at 4 h with the peat (flaming) smoke causing even greater lung inflammation at 24-h post-exposure. A significant alteration in ventilatory timing was also observed in mice exposed to the peat (flaming) and eucalyptus (flaming and smoldering) smoke immediately after each day of exposure. No responses were seen for exposures to similar concentrations of flaming or smoldering oak smoke. The lung toxicity potencies (neutrophil influx per PM mass) agreed well between the inhalation and previously reported aspiration studies, demonstrating that although flaming smoke contains much less PM mass than smoldering smoke, it is more toxic on a mass basis than smoldering smoke exposure, and that fuel type is also a controlling factor.
Assuntos
Biomassa , Exposição por Inalação/efeitos adversos , Fumaça/efeitos adversos , Poluentes Atmosféricos/toxicidade , Animais , Monóxido de Carbono/análise , Eucalyptus , Feminino , Pneumopatias/induzido quimicamente , Pneumopatias/patologia , Camundongos , Camundongos Endogâmicos BALB C , Infiltração de Neutrófilos/efeitos dos fármacos , Material Particulado/toxicidade , Quercus , Testes de Função Respiratória , Solo , MadeiraRESUMO
Heart rate assays in wild-type zebrafish embryos have been limited to analysis of one embryo per video/imaging field. Here we present for the first time a platform for high-throughput derivation of heart rate from multiple zebrafish (Danio rerio) embryos per imaging field, which is capable of quickly processing thousands of videos and ideal for multi-well platforms with multiple fish/well. This approach relies on use of 2-day post fertilization wild-type embryos, and uses only bright-field imaging, circumventing requirement for anesthesia or restraint, costly software/hardware, or fluorescently-labeled animals. Our original scripts (1) locate the heart and record pixel intensity fluctuations generated by each cardiac cycle using a robust image processing routine, and (2) process intensity data to derive heart rate. To demonstrate assay utility, we exposed embryos to the drugs epinephrine and clonidine, which increased or decreased heart rate, respectively. Exposure to organic extracts of air pollution-derived particulate matter, including diesel or biodiesel exhausts, or wood smoke, all complex environmental mixtures, decreased heart rate to varying degrees. Comparison against an established lower-throughput method indicated robust assay fidelity. As all code and executable files are publicly available, this approach may expedite cardiotoxicity screening of compounds as diverse as small molecule drugs and complex chemical mixtures.
Assuntos
Frequência Cardíaca/efeitos dos fármacos , Ensaios de Triagem em Larga Escala/métodos , Animais , Cardiotoxicidade , Avaliação Pré-Clínica de Medicamentos/métodos , Embrião não Mamífero , Processamento de Imagem Assistida por Computador , Material Particulado/toxicidade , Peixe-Zebra/embriologiaRESUMO
Light-absorbing organic carbon (OC), also referred to as "brown carbon" (BrC), has been intensively investigated in atmospheres impacted by biomass burning. However, other BrC sources (e.g., secondary formation in the atmosphere) are rarely studied in ambient aerosols. In the current work, forty-five PM2.5 filter samples were collected in Research Triangle Park (RTP), NC, USA from June 1st to July 15th, 2013. The bulk carbonaceous components, including OC, elemental carbon (EC), water soluble OC (WSOC), and an array of organic molecular markers were measured; an ultraviolet/visible spectrometer was used to measure the light absorption of methanol extractable OC and WSOC. The average light absorption per OC and WSOC mass of PM2.5 samples in summer RTP are 0.36⯱â¯0.16â¯m2 gC-1 and 0.29⯱â¯0.13â¯m2 gC-1, respectively, lower than the ambient aerosol samples impacted by biomass burning and/or fossil fuel combustion (0.7-1.6â¯m2 gC-1) from other places. Less than 1% of the aqueous extracts absorption is attributed to the light-absorbing chromophores (nitroaromatic compounds) identified in this work. To identify the major sources of BrC absorption in RTP in the summer, Positive Matrix Factorization (PMF) was applied to a dataset containing optical properties and chemical compositions of carbonaceous components in PM2.5. The results suggest that the formation of biogenic secondary organic aerosol (SOA) containing organosulfates is an important BrC source, contributing up to half of the BrC absorption in RTP during the summertime.
Assuntos
Poluentes Atmosféricos/análise , Poluição do Ar/análise , Carbono/análise , Luz , Compostos Orgânicos/análise , Material Particulado/análise , Estações do Ano , Aerossóis/análise , Atmosfera , Biomassa , Monitoramento Ambiental/métodos , Incêndios , Combustíveis Fósseis , Metanol , North Carolina , Tamanho da Partícula , Sudeste dos Estados Unidos , Ésteres do Ácido Sulfúrico/análise , Água/químicaRESUMO
Biomass pellets are a source of renewable energy; although, the air pollution and exposure risks posed by the emissions from burning pellets in biomass boilers (BBs) are uncertain. The present study examines the organic species in fine particle matter (PM) emissions from an BB firing switchgrass (SwG) and hardwood (HW) biomass pellets using different test cycles. The organic and elemental carbon (OC and EC) content and select semivolatile organic compounds (SVOCs) in filter-collected PM were identified and quantified using thermal-optical analysis and gas chromatography-mass spectrometry (GC-MS), respectively. Fine PM emissions from the BB ranged from 0.4 g/kg to 2.91 g/kg of pellets burned of which 40% ± 17% w/w was carbon. The sum of GC-MS quantified SVOCs in the PM emissions varied from 0.13 to 0.41 g/g OC. Relatively high levels of oxygenated compounds were observed in the PM emissions, and the most predominant individual SVOC constituent was levoglucosan (12.5-320 mg/g OC). The effect of boiler test cycle on emissions was generally greater than the effect due to pellet fuel type. Organic matter emissions increased at lower loads, owing to less than optimal combustion performance. Compared with other types of residential wood combustion studies, pellet burning in the current BB lowered PM emissions by nearly an order of magnitude. PM emitted from burning pellets in boilers tested across multiple studies also contains comparatively less carbon; however, the toxic polycyclic aromatic hydrocarbons (PAH) in the PM tested across these pellet-burning studies varied substantially, and produced 2-10 times more benzo[k]fluoranthene, dibenz[a,h]anthracene and indeno[1,2,3-c,d]pyrene on average. These results suggest that further toxicological evaluation of biomass pellet burning emissions is required to properly understand the risks posed.
RESUMO
The United States (US) Environmental Protection Agency (EPA)'s SPECIATE database contains speciated particulate matter (PM) and volatile organic compound (VOC) emissions profiles. Emissions profiles from anthropogenic combustion, industry, wildfires, and agricultural sources among others are key inputs for creating chemically-resolved emissions inventories for air quality modeling. While the database and its use for air quality modeling are routinely updated and evaluated, this work sets out to systematically prioritize future improvements and communicate speciation data needs to the research community. We first identify the most prominent profiles (PM and VOC) used in the EPA's 2014 emissions modeling platform based on PM mass and VOC mass and reactivity. It is important to note that the on-road profiles were excluded from this analysis since speciation for these profiles is computed internally in the MOVES model. We then investigate these profiles further for quality and to determine whether they were being appropriately matched to source types while also considering regional variability of speciated pollutants. We then applied a quantitative needs assessment ranking system which rates the profile based on age, appropriateness (i.e. is the profile being used appropriately), prevalence in the EPA modeling platform and the quality of the reference. Our analysis shows that the highest ranked profiles (e.g. profile assignments with the highest priority for updates) include PM2.5 profiles for fires (prescribed, agricultural and wild) and VOC profiles for crude oil storage tanks and residential wood combustion of pine wood. Top ranked profiles may indicate either that there are problems with the currently available source testing or that current mappings of profiles to source categories within EPA's modeling platform need improvement. Through this process, we have identified 29 emissions sourcecategories that would benefit from updated mapping. Many of these mapping mismatches are due to lack of emissions testing for appropriate source categories. In addition, we conclude that new source emissions testing would be especially beneficial for residential wood combustion, nonroad gasoline exhaust and nonroad diesel equipment.
RESUMO
Household cookstove emissions are an important source of carbonaceous aerosols globally. The light-absorbing organic carbon (OC), also termed brown carbon (BrC), from cookstove emissions can impact the Earth's radiative balance, but is rarely investigated. In this work, PM2.5 filter samples were collected during combustion experiments with red oak wood, charcoal, and kerosene in a variety of cookstoves mainly at two water boiling test phases (cold start CS, hot start HS). Samples were extracted in methanol and extracts were examined using spectrophotometry. The mass absorption coefficients (MACλ, m2 g-1) at five wavelengths (365, 400, 450, 500, and 550â¯nm) were mostly inter-correlated and were used as a measurement proxy for BrC. The MAC365 for red oak combustion during the CS phase correlated strongly to the elemental carbon (EC)/OC mass ratio, indicating a dependency of BrC absorption on burn conditions. The emissions from cookstoves burning red oak have an average MACλ 2-6 times greater than those burning charcoal and kerosene, and around 3-4 times greater than that from biomass burning measured in previous studies. These results suggest that residential cookstove emissions could contribute largely to ambient BrC, and the simulation of BrC radiative forcing in climate models for biofuel combustion in cookstoves should be treated specifically and separated from open biomass burning.
Assuntos
Absorção Fisico-Química , Poluentes Atmosféricos/análise , Carvão Vegetal/química , Querosene/análise , Modelos Químicos , Material Particulado/análise , Madeira/química , Aerossóis/análise , Biocombustíveis , Biomassa , Carbono/análise , Clima , Luz , ÁguaRESUMO
BACKGROUND: The increasing size and frequency of wildland fires are leading to greater potential for cardiopulmonary disease and cancer in exposed populations; however, little is known about how the types of fuel and combustion phases affect these adverse outcomes. OBJECTIVES: We evaluated the mutagenicity and lung toxicity of particulate matter (PM) from flaming vs. smoldering phases of five biomass fuels, and compared results by equal mass or emission factors (EFs) derived from amount of fuel consumed. METHODS: A quartz-tube furnace coupled to a multistage cryotrap was employed to collect smoke condensate from flaming and smoldering combustion of red oak, peat, pine needles, pine, and eucalyptus. Samples were analyzed chemically and assessed for acute lung toxicity in mice and mutagenicity in Salmonella. RESULTS: The average combustion efficiency was 73 and 98% for the smoldering and flaming phases, respectively. On an equal mass basis, PM from eucalyptus and peat burned under flaming conditions induced significant lung toxicity potencies (neutrophil/mass of PM) compared to smoldering PM, whereas high levels of mutagenicity potencies were observed for flaming pine and peat PM compared to smoldering PM. When effects were adjusted for EF, the smoldering eucalyptus PM had the highest lung toxicity EF (neutrophil/mass of fuel burned), whereas smoldering pine and pine needles had the highest mutagenicity EF. These latter values were approximately 5, 10, and 30 times greater than those reported for open burning of agricultural plastic, woodburning cookstoves, and some municipal waste combustors, respectively. CONCLUSIONS: PM from different fuels and combustion phases have appreciable differences in lung toxic and mutagenic potency, and on a mass basis, flaming samples are more active, whereas smoldering samples have greater effect when EFs are taken into account. Knowledge of the differential toxicity of biomass emissions will contribute to more accurate hazard assessment of biomass smoke exposures. https://doi.org/10.1289/EHP2200.
Assuntos
Poluentes Atmosféricos/efeitos adversos , Biomassa , Material Particulado/efeitos adversos , Incêndios Florestais , Poluentes Atmosféricos/análise , Animais , Exposição Ambiental/efeitos adversos , Monitoramento Ambiental/métodos , Feminino , Pulmão/patologia , Camundongos , Testes de Mutagenicidade/métodos , Material Particulado/análise , Salmonella/genética , Fumaça/efeitos adversos , Fumaça/análiseRESUMO
Liquefied petroleum gas (LPG) cookstoves are considered to be an important solution for mitigating household air pollution; however, their performance has rarely been evaluated. To fill the data and knowledge gaps in this important area, 89 laboratory tests were conducted to quantify efficiencies and pollutant emissions from five commercially available household LPG stoves under different burning conditions. The mean thermal efficiency (±standard deviation) for the tested LPG cookstoves was 51 ± 6%, meeting guidelines for the highest tier level (Tier 4) under the International Organization for Standardization, International Workshop Agreement 11. Emission factors of CO2, CO, THC, CH4, and NOx on the basis of useful energy delivered (MJd) were 142 ± 17, 0.77 ± 0.55, 130 ± 196, 5.6 ± 8.2, and 46 ± 9 mg/MJd, respectively. Approximately 90% of the PM2.5 data were below the detection limit, corresponding to an emission rate below 0.11 mg/min. For those data above the detection limit, the average emission factor was 2.4 ± 1.6 mg/MJd, with a mean emission rate of 0.20 ± 0.16 mg/min. Under the specified gas pressure (2.8 kPa), but with the burner control set to minimum air flow rate, less complete combustion resulted in a visually yellow flame, and CO, PM2.5, EC, and BC emissions all increased. LPG cookstoves met guidelines for Tier 4 for both CO and PM2.5 emissions and mostly met the World Health Organization Emission Rate Targets set to protect human health.
Assuntos
Poluentes Atmosféricos , Poluição do Ar , Utensílios Domésticos , Petróleo , Culinária , HumanosRESUMO
This study investigates the composition of organic particulate matter in PM2.5 in a remote montane forest in the southeastern US, focusing on the role of organic nitrogen (N) in sulfur-containing secondary organic aerosol (nitrooxy-organosulfates) and aerosols associated with biomass burning (nitro-aromatics). Bulk water-soluble organic N (WSON) represented ~ 14% w/w of water-soluble total N (WSTN) in PM2.5 on average across seasonal measurement campaigns conducted in the spring, summer, and fall of 2015. The largest contributions of WSON to WSTN were observed in spring (~ 18% w/w) and the lowest in the fall (~ 10% w/w). On average, identified nitro-aromatic and nitrooxy-organosulfate compounds accounted for a small fraction of WSON, ranging from ~ 1% in spring to ~ 4% in fall, though were observed to contribute as much as 28% w/w of WSON in individual samples that were impacted by local biomass burning. The highest concentrations of oxidized organic N species occurred during summer (average of 0.65 ng N m-3) along with a greater relative abundance of higher-generation oxygenated terpenoic acids, indicating an association with more aged aerosol. The highest concentrations of nitro-aromatics (e.g., nitrocatechol and methyl-nitrocatechol), levoglucosan, and aged SOA tracers were observed during fall, associated with aged biomass burning plumes. Nighttime nitrate radical chemistry is the most likely formation pathway for nitrooxy-organosulfates observed at this low NO x site (generally < 1 ppb). Isoprene-derived organosulfate (MW216, 2-methyltetrol derived), which is formed from isoprene epoxydiols (IEPOX) under low NO x conditions, was the most abundant individual organosulfate. Concentration-weighted average WSON / WSOC ratios for nitro-aromatics + organosulfates + terpenoic acids were 1 order of magnitude lower than the overall aerosol WSON / WSOC ratio, indicating the presence of other uncharacterized higher-N-content species. Although nitrooxy-organosulfates and nitro-aromatics contributed a small fraction of WSON, our results provide new insight into the atmospheric formation processes and sources of these largely uncharacterized components of atmospheric organic N, which also helps to advance the atmospheric models to better understand the chemistry and deposition of reactive N.
RESUMO
Secondary organic aerosol (SOA) can affect the atmospheric radiation balance through absorbing light at shorter visible and UV wavelengths. However, the composition and optical properties of light-absorbing SOA is poorly understood. In this work, SOA filter samples were collected during individual chamber experiments conducted with three biogenic and eight aromatic volatile organic compound (VOC) precursors in the presence of NOX and H2O2. Compared with the SOA generated using the aromatic precursors, biogenic SOA generally exhibits negligible light absorption above 350 nm; the aromatic SOA generated in the presence of NOX shows stronger light absorption than that generated with H2O2. Fifteen nitroaromatic compound (NAC) chemical formulas were identified and quantified in SOA samples. Their contributions to the light absorption of sample extracts were also estimated. On average, the m-cresol/NOX SOA sample has the highest mass contribution from NACs (10.4 ± 6.74%, w/w), followed by naphthalene/NOX (6.41 ± 2.08%) and benzene/NOX (5.81 ± 3.82%) SOA. The average contributions of NACs to total light absorption were at least two times greater than their average mass contributions at 365 and 400 nm, revealing the potential use of chromophoric NACs as brown carbon (BrC) tracers in source apportionment and air quality modeling studies.