RESUMO
The inherent toxicity and persistence of emerging contaminants such as antibiotics and endocrine disruptors pose substantial threats to the environment. Advanced oxidation processes (AOPs) employed for oxidative degradation could yield toxic oxidation by-products (OBPs), including organic acids and aromatic hydrocarbons. Despite their typically low concentrations, OBPs require scrutiny owing to their potential health risks. Although effective assessment methodologies are available, a comprehensive review focusing on the ecological and environmental effects of these pollutants is lacking. This study offers a succinct overview of existing ecotoxicological exposure assessments for emerging organic pollutants. Further, it encapsulates principal dose-response assessment techniques and provides a comparative analysis of several methods. The straightforward assessment factor method evaluates risk based on exposure and species sensitivity and is suitable for preliminary assessments of single pollutants; Species Sensitivity Distribution (SSD) compares species sensitivities to OBPs, emphasizing the importance of species-specific toxicological responses; microcosm and mesocosm methods simulate and predict the effects of OBPs on aquatic life by considering environmental diversity and biological community structures and are ideal for assessing the toxicity of multiple OBPs; the ecological risk analysis model employs mathematical and probabilistic approaches to comprehensively and accurately assess exposures and effects, accounting for the complexities and uncertainties inherent in ecotoxicological evaluations. Different risk characterization techniques are outlined in this study, including the risk quotient (RQ), which is ideal for quantifying and comparing risks; probabilistic ecological risk assessment (PERA), suitable for managing significant uncertainty; and the Environmental Pollution Index (EPI), the preferred method for quantitative assessment of OBP pollution levels. The merits and limitations of each of these quantitative assessment tools are evaluated, providing a comprehensive view of their applications in risk analysis. In addition, pressing contemporary challenges are identified and trajectories and pivotal issues suggested for future research.
RESUMO
Direct photoreduction of FeIII is a widely recognized route for accelerating FeIII/FeII cycle in photo-Fenton chemistry. However, most of the wavelengths covering the full spectral range are insufficient to supply enough photon energy for the direct reduction process. Herein, the hitherto neglected mechanism of FeIII reduction that the FeIII indirect reduction pathway initiated by light energy-dependent reactivity variation and reactive excited state (ES) was explored. Evolution of excited-state FeIII species (*FeIII) resulting from metal-centered charge excitation (MCCE) of FeIII is experimentally verified using pulsed laser femtosecond transient absorption spectroscopy with UV-vis detection and theoretically verified by quantum chemical calculation. Intense photoinduced intravalence charge transition was observed at λ = 380 and 466 nm, revealing quartet 4MCCE and doublet 2MCCE and their exponential processes. Light energy-dependent variation of *FeIII reactivity was kinetically certified by fitting the apparent rate constant of the radical-chain sequence of photo-Fenton reactions. Covalency is found to compensate for the intravalence charge separation following photoexcitation of the metal center in the MCCE state of Fenton photosensitizer. The *FeIII is established as a model, demonstrating the intravalence hole delocalization in the ES can be leveraged for photo-Fenton reaction or other photocatalytic schemes based on electron transfer chemistry.
Assuntos
Ferro , Ferro/química , Oxirredução , Peróxido de Hidrogênio/química , CinéticaRESUMO
High-valent metal-oxo species (HMOS) have been extensively recognized in advanced oxidation processes (AOPs) owing to their high selectivity and high chemical utilization efficiency. However, the interactions between HMOS and halide ions in sewage wastewater are complicated, leading to ongoing debates on the intrinsic reactive species and impacts on remediation. Herein, we prepared three typical HMOS, including Fe(IV), Mn(V)-nitrilotriacetic acid complex (Mn(V)NTA) and Co(IV) through peroxymonosulfate (PMS) activation and comparatively studied their interactions with Cl- to reveal different reactive chlorine species (RCS) and the effects of HMOS types on RCS generation pathways. Our results show that the presence of Cl- alters the cleavage behavior of the peroxide OO bond in PMS and prohibits the generation of Fe(IV), spontaneously promoting SO4â¢- production and its subsequent transformation to secondary radicals like Cl⢠and Cl2â¢-. The generation and oxidation capacity of Mn(V)NTA was scarcely influenced by Cl-, while Cl- would substantially consume Co(IV) and promote HOCl generation through an oxygen-transfer reaction, evidenced by density functional theory (DFT) and deuterium oxide solvent exchange experiment. The two-electron-transfer standard redox potentials of Fe(IV), Mn(V)NTA and Co(IV) were calculated as 2.43, 2.55 and 2.85 V, respectively. Due to the different reactive species and pathways in the presence of Cl-, the amounts of chlorinated by-products followed the order of Co(II)/PMS > Fe(II)/PMS > Mn(II)NTA/PMS. Thus, this work renovates the knowledge of halide chemistry in HMOS-based systems and sheds light on the impact on the treatment of salinity-containing wastewater.
Assuntos
Oxirredução , Cloretos/química , Cloro/química , Metais/química , Halogenação , Poluentes Químicos da Água/química , Águas Residuárias/químicaRESUMO
This study used a simple mechanical ball milling strategy to significantly improve the ability of Mn2O3 to activate peracetic acid (PAA) for sustainable and efficient degradation of organic micropollutant (like bisphenol A, BPA). BPA was successfully removed and detoxified via PAA activation by the bm-Mn2O3 within 30 min under neutral environment, with the BPA degradation kinetic rate improved by 3.4 times. Satisfactory BPA removal efficiency can still be achieved over a wide pH range, in actual water and after reuse of bm-Mn2O3 for four cycles. The change in hydrophilicity of Mn2O3 after ball milling evidently elevated the affinity of Mn2O3 for binding to PAA, while the reduction in particle size exposed more active sites contributing partially to catalytic oxidation. Further analysis revealed that BPA oxidation in the ball mill-treated Mn2O3 (bm-Mn2O3)/PAA process mainly depends on the bm-Mn2O3-PAA complex (i.e., Mn(III)-OO(O)CCH3) mediated non-radical pathway rather than R-O⢠and Mn(IV). Especially, the existence of the Mn(III)-PAA complex was definitely verified by in situ Raman spectroscopy and in situ diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS). Simultaneously, density functional theory calculations determined that PAA adsorbs readily on manganese sites thereby favoring the formation of Mn(III)-OO(O)CCH3 complexes. This study advances an in-depth understanding of the underlying mechanisms involved in the manganese oxide-catalyzed activation of PAA for superior non-radical oxidation of micropollutants.
RESUMO
In this study, the porous carbon material (FeN-BC) with ultra-high catalytic activity was obtained from waste biomass through Fe-N co-doping. The prominent degradation rate (> 96.8%) of naproxen (NAP) was achieved over a wide pH range (pH 3.0-9.0) in FeN-BC/PAA system. Unlike previously reported iron-based peracetic acid (PAA) systems with â¢OH or RO⢠as the dominated reactive species, the degradation of contaminants was attributed to singlet oxygen (1O2) produced by organic radicals (ROâ¢) decomposition, which was proved to be thermodynamically feasible and favorable by theoretical calculations. Combining the theoretical calculations, characteristic and experimental analysis, the synergistic effects of Fe and N were proposed and summarized as follows: i) promoted the formation of extensive defects and Fe0 species that facilitated electron transfer between FeN-BC and PAA and continuous Fe(II) generation; ii) modified the specific surface area (SSA) and the isoelectric point of FeN-BC in favor of PAA adsorption on the catalyst surface. This study provides a strategy for waste biomass reuse to construct a heterogeneous catalyst/PAA system for efficient water purification and reveals the synergistic effects of typical metal-heteroatom for PAA activation.
Assuntos
Biomassa , Carvão Vegetal , Ferro , Ácido Peracético , Poluentes Químicos da Água , Purificação da Água , Ácido Peracético/química , Carvão Vegetal/química , Ferro/química , Poluentes Químicos da Água/química , Purificação da Água/métodos , Nitrogênio/química , Naproxeno/química , Catálise , Descontaminação/métodos , AdsorçãoRESUMO
Many studies have investigated activation of ferrate (Fe(VI)) to produce reactive high-valent iron intermediates to enhance the oxidation of micropollutants. However, the differences in the risk of pollutant transformation caused by Fe(IV) and Fe(V) have not been taken seriously. In this study, Fe(VI)-alone, Fe3+/Fe(VI), and NaHCO3/Fe(VI) processes were used to oxidize fluoroquinolone antibiotics to explore the different effects of Fe(IV) and Fe(V) on product accumulation and toxicity changes. The contribution of Fe(IV) to levofloxacin degradation was 99.9% in the Fe3+/Fe(VI) process, and that of Fe(V) was 89.4% in the NaHCO3/Fe(VI) process. The cytotoxicity equivalents of levofloxacin decreased by 1.9 mg phenol/L in the Fe(IV)-dominant process while they significantly (p < 0.05) increased by 4.7 mg phenol/L in the Fe(V)-dominant process. The acute toxicity toward luminescent bacteria and the results for other fluoroquinolone antibiotics also showed that Fe(IV) reduced the toxicity and Fe(V) increased the toxicity. Density functional theory calculations showed that Fe(V) induced quinolone ring opening, which would increase the toxicity. Fe(IV) tended to oxidize the piperazine group, which reduced the toxicity. These results show the different-pollutant transformation caused by Fe(IV) and Fe(V). In future, the different risk outcomes during Fe(VI) activation should be taken seriously.
Assuntos
Poluentes Ambientais , Poluentes Químicos da Água , Purificação da Água , Fluoroquinolonas/toxicidade , Levofloxacino , Ferro , Oxirredução , Fenóis , Antibacterianos/toxicidade , Purificação da Água/métodosRESUMO
Metal-free carbon material-mediated nonradical oxidation processes (C-NOPs) have emerged as a research hotspot due to their excellent performance in selectively eliminating organic pollutants in aqueous environments. However, the selective oxidation mechanisms of C-NOPs remain obscure due to the diversity of organic pollutants and nonradical active species. Herein, quantitative structure-activity relationship (QSAR) models were employed to unveil the origins of C-NOP selectivity toward organic pollutants in different oxidant systems. QSAR analysis based on adsorption and oxidation descriptors revealed that C-NOP selectivity depends on the oxidation potentials of organic pollutants rather than on adsorption interactions. However, the dominance of electronic effects in selective oxidation decreases with increasing structural complexity of organic pollutants. Moreover, the oxidation threshold solely depends on the inherent electronic nature of organic pollutants and not on the reactivity of nonradical active species. Notably, the accuracy of substituent descriptors (Hammett constants) and theoretical descriptors (e.g., highest occupied molecular orbital energy, ionization potential, and single-electron oxidation potential) is significantly influenced by the complexity and molecular state of organic pollutants. Overall, the study findings reveal the origins of organic pollutant-oriented selective oxidation and provide insight into the application of descriptors in QSAR analysis.
Assuntos
Poluentes Ambientais , Poluentes Químicos da Água , Carbono , Relação Quantitativa Estrutura-Atividade , Oxirredução , Oxidantes/química , Poluentes Químicos da Água/químicaRESUMO
Peracetic acid (PAA) is regarded as an environmentally friendly oxidant because of its low formation of toxic byproducts. However, this study revealed the potential risk of generating disinfection byproducts (DBPs) when treating iodine-containing wastewater with PAA. The transformation efficiency of bisphenol A (BPA), a commonly detected phenolic contaminant and a surrogate for phenolic moieties in dissolved organic matter, by PAA increased rapidly in the presence of I-, which was primarily attributed to the formation of active iodine (HOI/I2) in the system. Kinetic model simulations demonstrated that the second-order rate constant between PAA and HOI was 54.0 M-1 s-1 at pH 7.0, which was lower than the generation rate of HOI via the reaction between PAA and I-. Therefore, HOI can combine with BPA to produce iodine disinfection byproducts (I-DBPs). The transformation of BPA and the generation of I-DBPs in the I-/PAA system were highly pH-dependent. Specifically, acidic conditions were more favorable for BPA degradation because of the higher reaction rates of BPA and HOI. More iodinated aromatic products were detected after 5 min of the reaction under acidic and neutral conditions, resulting in higher toxicity towards E. coli. After 12 h of the reaction, more adsorbable organic iodine (AOI) was generated at alkaline conditions because HOI was not able to efficiency transform to IO3-. The presence of H2O2 in the PAA solution played a role in the reaction with HOI, particularly under alkaline conditions. This study significantly advances the understanding of the role of I- in BPA oxidation by PAA and provides a warning to further evaluate the potential environmental risk during the treatment of iodine-bearing wastewater with PAA.
Assuntos
Iodo , Poluentes Químicos da Água , Purificação da Água , Ácido Peracético , Desinfecção/métodos , Iodetos , Peróxido de Hidrogênio , Águas Residuárias , Escherichia coli , Concentração de Íons de Hidrogênio , Poluentes Químicos da Água/análise , Purificação da Água/métodosRESUMO
Precisely identifying the atomic structures in single-atom sites and establishing authentic structure-activity relationships for single-atom catalyst (SAC) coordination are significant challenges. Here, theoretical calculations first predicted the underlying catalytic activity of Fe-NxC4-x sites with diverse first-shell coordination environments. Substituting N with C to coordinate with the central Fe atom induces an inferior Fenton-like catalytic efficiency. Then, Fe-SACs carrying three configurations (Fe-N2C2, Fe-N3C1, and Fe-N4) fabricate facilely and demonstrate that optimized coordination environments of Fe-NxC4-x significantly promote the Fenton-like catalytic activity. Specifically, the reaction rate constant increases from 0.064 to 0.318 min-1 as the coordination number of Fe-N increases from 2 to 4, slightly influencing the nonradical reaction mechanism dominated by 1O2. In-depth theoretical calculations unveil that the modulated coordination environments of Fe-SACs from Fe-N2C2 to Fe-N4 optimize the d-band electronic structures and regulate the binding strength of peroxymonosulfate on Fe-NxC4-x sites, resulting in a reduced energy barrier and enhanced Fenton-like catalytic activity. The catalytic stability and the actual hospital sewage treatment capacity also showed strong coordination dependency. This strategy of local coordination engineering offers a vivid example of modulating SACs with well-regulated coordination environments, ultimately maximizing their catalytic efficiency.
Assuntos
Eletrônica , Hospitais , Catálise , Ferro , EsgotosRESUMO
Oxyanions, a class of constituents naturally occurring in water, have been widely demonstrated to enhance permanganate (Mn(VII)) decontamination efficiency. However, the detailed mechanism remains ambiguous, mainly because the role of oxyanions in regulating the structural parameters of colloidal MnO2 to control the autocatalytic activity of Mn(VII) has received little attention. Herein, the origin of oxyanion-induced enhancement is systematically studied using theoretical calculations, electrochemical tests, and structure-activity relation analysis. Using bicarbonate (HCO3-) as an example, the results indicate that HCO3- can accelerate the degradation of phenol by Mn(VII) by improving its autocatalytic process. Specifically, HCO3- plays a significant role in regulating the structure of in situ produced MnO2 colloids, i.e., increasing the surface Mn(III)s content and restricting particle growth. These structural changes in MnO2 facilitate its strong binding to Mn(VII), thereby triggering interfacial electron transfer. The resultant surface-activated Mn(VII)* complexes demonstrate excellent degrading activity via directly seizing one electron from phenol. Further, other oxyanions with appropriate ionic potentials (i.e., borate, acetate, metasilicate, molybdate, and phosphate) exhibit favorable influences on the oxidative capability of Mn(VII) through an activation mechanism similar to that of HCO3-. These findings considerably improve our fundamental understanding of the oxidation behavior of Mn(VII) in actual water environments and provide a theoretical foundation for designing autocatalytically boosted Mn(VII) oxidation systems.
Assuntos
Compostos de Manganês , Óxidos , Óxidos/química , Compostos de Manganês/química , Fenol , Fenóis , Oxirredução , ÁguaRESUMO
Carbon nanotubes (CNTs) and their derivatives have been widely exploited to activate various oxidants for environmental remediation. However, the intrinsic mechanism of CNTs-driven periodate (PI) activation remains ambiguous, which significantly impedes their scientific progress toward practical application. Here, we found that CNTs can strongly boost PI activation for the oxidation of various phenols. Reactive oxygen species analysis, in situ Raman characterization, galvanic oxidation process experiments, and electrochemical tests revealed that CNTs could activate PI to form high-potential metastable intermediates (CNTs-PI*) rather than produce free radicals and 1O2, thereby facilitating direct electron transfer from the pollutants to PI. Additionally, we analyzed quantitative structure-activity relationships between rate constants of phenols oxidation and double descriptors (e.g., Hammett constants and logarithm of the octanol-water partition coefficient). The adsorption of phenols on CNT surfaces and their electronic properties are critical factors affecting the oxidation process. Besides, in the CNTs/PI system, phenol adsorbed the CNT surfaces was oxidized by the CNTs-PI* complexes, and products were mainly generated via the coupling reaction of phenoxyl radical. Most of the products adsorbed and accumulated on the CNT surfaces realized phenol removal from the bulk solution. Such a unique non-mineralization removal process achieved an extremely high apparent electron utilization efficiency of 378%. The activity evaluation and theoretical calculations of CNT derivatives confirmed that the carbonyl/ketonic functional groups and double-vacancy defects of the CNTs were the primary active sites, where high-oxidation-potential CNTs-PI* were formed. Further, the PI species could achieve a stoichiometric decomposition into iodate, a safe sink of iodine species, without the generation of typical iodinated byproducts. Our discovery provides new mechanistic insight into CNTs-driven PI activation for the green future of environmental remediation.
Assuntos
Nanotubos de Carbono , Nanotubos de Carbono/química , Fenol , Oxirredução , FenóisRESUMO
Herein, electro-catalysis (EC) as the electron donor to accelerate the continuable Fe(III)/Fe(II) cycles in different inorganic peroxides (i.e., peroxymonosulfate (PMS), peroxydisulfate (PDS) and hydrogen peroxide (HP)) activation systems were established. These electro-cocatalytic Fenton-like systems exhibited an excellent degradation efficiency of sulfamethoxazole (SMX). A series of analytical and characterization methods including quenching experiments, probe experiments, and electron paramagnetic resonance spectrometry (EPR) were implemented to systematically sort out the source and yield of reactive oxygen species (ROS). A wide kind of ROS including hydroxyl radical (â¢OH), singlet oxygen (1O2), and sulfate radical (SO4â¢-), which contributed 38%, 37%, and 24% were produced in EC/Fe(III)/PMS system, respectively. â¢OH was the dominant ROS in both EC/Fe(III)/PDS and EC/Fe(III)/HP processes. According to the analysis of SMX degradation routes and biotoxicity, abundant degradation pathways were identified in EC/Fe(III)/PMS process and lower environmental impact was achieved in EC/Fe(III)/HP process. The diversiform ROS of EC/Fe(III)/PMS system makes it exhibit greater environmental adaptability in complex water matrixes and excellent low-energy consumption performance in many organic pollutants degradation. Continuous flow treatment experiments proved that the three systems have great sustainability and practical application prospect. This work provides a strong basis for constructing suitable systems to achieve different treatment requirements.
RESUMO
As a novel strategy, peracetic acid (PAA) based advanced oxidation processes (AOPs) are being used in micropollutant elimination due to their high oxidation and low toxicity. In this study, Co2Ca1Al1-LDO as a kind of layered double oxides (LDOs) was successfully synthesized, and it is the first time to apply Co2Ca1Al1-LDO for activating PAA. The Co2Ca1Al1-LDO/PAA system showed excellent removal efficiencies for various micropollutants with removal ratios ranging from 90.4% to 100% and k values from 0.087 min-1 to 0.298 min-1. In the degradation period, various reactive oxygen species (ROS) are involved in the system, while organic radicals (R-Oâ¢) with a high concentration of 5.52 × 10-13 M are the dominant ROS in the contaminants degradation process. Compared to other ROS, R-O⢠had the largest contribution ratio (more than 85%) to pollutant degradation. Further analysis demonstrated that C1, C2, C3, C4, C5, C6 and N11 concentrated on the aniline group of SMX are the main attack sites based on the density functional theory (DFT) results, which is consistent with the degradation products. The toxicity of contaminants was obviously reduced after removing in this system. Furthermore, Co2Ca1Al1-LDO showed good reusability and stability, and Co2Ca1Al1-LDO/PAA system had excellent removal ability in actual water bodies containing inorganic anions, showing good application potential. Importantly, this study explored the feasibility of applying LDO catalysts in PAA-based AOPs for micropollutants elimination, providing new insights for subsequent research.
RESUMO
As an oxidant, peracetic acid (PAA) is gradually applied in advanced oxidation processes (AOPs) for pollutants degradation due to its high oxidation and low toxicity. In this study, the prepared Co2Fe1-LDH showed excellent PAA activation ability for efficient degradation of various pharmaceuticals with a removal efficiency ranging from 82.3% to 100%. Taking sulfamethoxazole (SMX) as a model pharmaceutical, it's found that organic radical (R-Oâ¢) with high concentration of 5.27 × 10-13 M is the dominant ROS responsible for contaminants degradation. Further analysis demonstrated that bimetallic synergistic effect between Co and Fe can improve electron transfer ability of Co2Fe1-LDH, resulting in the accelerated conversion of Co from +3 to +2 valence state with a high reaction rate (4.3 × 101-1.483 × 102 M-1 s-1) in this system. Density functional theory (DFT) reveals that C1, C3, C5 and N11 with higher ƒ0 and ƒ-values concentrated on aniline group of SMX are the main attack sites, which is consistent with the results of degradation products. Besides, Co2Fe1-LDH/PAA system can effectively reduce biological toxicity after reaction, due to lower biotoxicity of degradation products and the carbon sources provided by PAA. In application, Co2Fe1-LDH/PAA system was capable of resisting the influence of water matrix and effectively removing pollutants in actual hospital wastewater. Importantly, this study comprehensively evaluated the ability of Co2Fe1-LDH/PAA system to remove organics and improve the biodegradability of actual hospital wastewater, providing guidance for application of PAA activation system.
Assuntos
Ácido Peracético , Poluentes Químicos da Água , Águas Residuárias , Peróxido de Hidrogênio , Sulfametoxazol , Oxirredução , Preparações FarmacêuticasRESUMO
High microwave-response cobalt-substituted manganese ferrite (CMFO-0.5) was successfully synthesized as a heterogeneous catalyst for efficient peracetic acid (PAA) activation and tetracycline hydrochloride (TCH) degradation with singlet oxygen (1O2) as the dominated reactive oxidized species (ROS). The removal efficiency of TCH could reach 98.16% within 6 min under microwave irradiation when the CMFO-0.5 was added at 20 mg/L. It's found that the Co substitution could produce the oxygen vacancies (OVs), improve the microwave (MW) absorbing performance and enhance the internal electron transfer efficiency of materials. The phenomenon why 1O2 as the dominated ROS rather than hydroxyl radical (â¢OH) and organic radicals (R-Oâ¢) would be explained by the following aspects: the oxygen adsorbed on the OVs can accept the electron transformed from PAA to form superoxide radical (â¢O2-), which will disproportionate to form 1O2; the energy generated by the non-thermal effect of MW can dissociate PAA to generate peroxy-group for 1O2 generation. Furthermore, the possible TCH degradation pathways were proposed based on DFT theory calculations and product identification, and the toxicity predictions of the degradation products were also performed by the Ecological Structure-Activity Relationship Model (ECOSAR) software. Additionally, the decrease of acute toxicity of treated TCH, excellent stability and strong resistance towards water matrix fully demonstrate the superiority of the proposed system for practical application in wastewater treatment.
Assuntos
Ácido Peracético , Tetraciclina , Micro-Ondas , Oxigênio , Radical Hidroxila , Oxigênio Singlete , Espécies Reativas de Oxigênio , Superóxidos , Oxirredução , Cobalto , ÁguaRESUMO
In this study, mechanically sulfidated microscale zero valent iron (S-ZVI) was found to effectively activate the peracetic acid (PAA) with a result of almost complete degradation of six micropollutants within 10 min under neutral conditions, and > 95% sulfamethoxazole (SMX) removal after six cycles. Reactive oxidized species (ROS) including HOâ¢, carbon-centered radicals, and Fe(IV) were generated in the S-ZVI/PAA system, while HO⢠was the main contributor towards micropollutants degradation. This study clearly revealed that enhancement of the electron donating ability of ZVI by the formed conductive iron sulfides was crucial for promoted Fe(II) generation and subsequent PAA activation over several cycles, rather than the ability of sulfides to reduce Fe(III) for Fe(II) regeneration as reported previously. Interestingly, it's discovered that co-existence of Fe(III) would dramatically improve the contaminants removal efficiency of the S-ZVI/PAA system; transform the surfaced Fe(II) dominated ROS generation process to aqueous Fe(II) one; enhance the tolerance of the proposed system to water matrix. The promoting effect of predosed Fe(III) on PAA activation by S-ZVI should be mainly associated with: the greater ability of Fe(III) than H2O to accept electron from Fe0 for obtaining more active sites; slower Fe0 consumption and solid sulfur species release for elevated electron utilization efficiency and PAA activation. Considering the convenient and cost-effective access of Fe(III), the decrease of acute toxicity of treated SMX, excellent stability and good removal of various micropollutants fully demonstrate the superiority of S-ZVI/PAA system for practical application.
Assuntos
Ferro , Poluentes Químicos da Água , Compostos Ferrosos , Ferro/química , Ácido Peracético , Espécies Reativas de Oxigênio , Sulfametoxazol , SulfetosRESUMO
In this study, the previously overlooked effects of contaminants' molecular structure on their degradation efficiencies and dominant reactive oxygen species (ROS) in advanced oxidation processes (AOPs) are investigated with a peroxymonosulfate (PMS) activation system selected as the typical AOP system. Averagely, degradation efficiencies of 19 contaminants are discrepant in the CoCaAl-LDO/PMS system with production of SO4â¢-, â¢OH, and 1O2. Density functional theory calculations indicated that compounds with high EHOMO, low-energy gap (ΔE = ELUMO - EHOMO), and low vertical ionization potential are more vulnerable to be attacked. Further analysis disclosed that the dominant ROS was the same one when treating similar types of contaminants, namely SO4â¢-, 1O2, 1O2, and â¢OH for the degradation of CBZ-like compounds, SAs, bisphenol, and triazine compounds, respectively. This phenomenon may be caused by the contaminants' structures especially the commonly shared or basic parent structures which can affect their effective reaction time and second-order rate constants with ROS, thus influencing the contribution of each ROS during its degradation. Overall, the new insights gained in this study provide a basis for designing more effective AOPs to improve their practical application in wastewater treatment.
Assuntos
Poluentes Químicos da Água , Purificação da Água , Estrutura Molecular , Oxirredução , Peróxidos/química , Espécies Reativas de Oxigênio , Poluentes Químicos da Água/químicaRESUMO
As peracetic acid (PAA) is being increasingly used as an alternative disinfectant, efficient activation of PAA by low-cost and environmentally friendly catalysts over a wide pH range is potentially useful for simultaneous sterilization and pharmaceutical degradation in wastewater, such as hospital wastewater. In this study, peracetic acid (PAA) was successfully activated by low-cost and environmental-friendly FeS (25 mg/L) for efficient oxidative removal of three pharmaceuticals over a wide pH range (3.0â¼9.0) as indicated by 80â¼100% removal rate within 5 min. As expected, Fe(II) rather than sulfur species was the primary reactive site for PAA activation, while unlike the homogeneous Fe2+/PAA system with organic radicals (R-O·) and ·OH as the dominant reactive oxidized species (ROS), ·OH is the key reactive species in the FeS/PAA system. Interestingly and surprisingly, in-depth investigation revealed the dual role of sulfur species in regulating the reactive oxidized species: (1) S(-II) and its conversion product H2S (aq) played a significant role in Fe(II) regeneration with a result of accelerated PAA activation; (2) however, the R-O· generated in the initial seconds of the FeS/PAA process was supposed to be quickly consumed by sulfur species, resulting in ·OH as the dominant ROS over the whole process. The selective reaction of sulfur species with R-O· instead of ·OH was supported by the obviously lower Gibbs free energy of CH3COO· and sulfur species than ·OH, suggesting the preference of CH3COO· to react with sulfur species with electron transfer. After treatment with the FeS/PAA system, the products obtained from the three pharmaceuticals were detoxified and even facilitated the growth of E. coli probably due to the supply of numerous carbon sources by activated PAA. This study significantly advances the understanding of the reaction between PAA and sulfur-containing catalysts and suggests the practical application potential of the FeS/PAA process combined with biotreatment processes.
Assuntos
Ácido Peracético , Poluentes Químicos da Água , Escherichia coli , Compostos Ferrosos , Peróxido de Hidrogênio , Oxirredução , Preparações Farmacêuticas , Espécies Reativas de Oxigênio , Enxofre , Águas Residuárias , Poluentes Químicos da Água/análiseRESUMO
Visible light catalysis has been widely coupled with persulfate activation for refractory pollutants removal, while the exact role of persulfate played in such composite system is still questionable. In this work, the relation between peroxymonosulfate (PMS) induced structure change and visible light responsive activity of inverse spinel: i.e., Zn2SnO4, was deciphered. Under the visible light illumination (λ> 420nm) PMS addition would endow the composite system with pollutant removal performance. Batch test revealed that 60% of bisphenol-A (5 mg L-1) was mineralized within 3 h reaction time, by dosing 0.81 mM PMS and 0.1 g L-1 catalyst. The above oxidative system was also effective for other refractory pollutants elimination. Further analysis indicated that PMS could reduce the band gap of spinel from 2.75 to 2.52 eV and thereby enabling its visible light activity. Photogenerated h+ induced â¢OH and e- mediated â¢O2- contributed to the pollutant removal while h+ played a leading role. Density functional theory revealed that PMS would capture oxygen atom of spinel and induce surface oxygen vacancy defect structure formation. Also, three-oxygen atom coordinated Zn was identified as the possible catalyze site. This work is valuable for deep understanding the exact role of persulfate in photocatalytic system.
RESUMO
While ubiquitous natural organic matters (NOMs) are capable of enhancing zero-valent iron (ZVI) performance under aerobic conditions, there is limited understanding of how the properties of NOMs affect the reactivity of ZVI towards contaminants removal. Here, the corresponding activity of ZVI under aerobic conditions was investigated in the presence of humic acid (HA), fulvic acid (FA), bovine serum albumin (BSA). It was found that three models of NOMs were all effective in promoting diatrizoate (DTA) reduction via depassivating ZVI. Interestingly, fast adsorption of NOM onto ZVI surface initially caused inconspicuous impact or visible inhibition on hydrophilic DTA reduction depending on their hydrophobicity. However, subsequent exposure of more reactive sites with high hydrophilicity arising from the detachment of surfaced NOM-associated iron oxide finally contributed to the enhanced consumption of Fe0 with the ability: HA > FA ≈ BSA, and 1-2 times increase in DTA removal kinetic rate following the order: HA > FA > BSA. It further revealed that there were two key factors in determining DTA removal under aerobic conditions, including the ability of NOMs to boost Fe0 consumption as contributed by their aromaticity degree and amino groups, and the hydrophobicity of NOMs to initially affect the property of ZVI surfaces.