Enhanced Oxidation-Resistant and Conductivity in MXene Films with Seamless Heterostructure.

MXene-based films have garnered significant attention for their remarkable electrical and mechanical properties. Nevertheless, the practical application of MXene is impeded by its intrinsic instability caused by spontaneous oxidation. The traditional anti-oxidative strategies frequently lead to a compromise in stability, electrical conductivity, and mechanical properties. In this study, a novel approach is proposed involving metal nano-armoring, wherein a copper layer with nano thickness is deposited onto MXene film surfaces to establish a uniform and seamless heterogeneous interface (MXene@Cu). The precise tunability and uniformity of this heterostructure are consistently demonstrated through both theoretical calculations and experimental results. The MXene@Cu films exhibit exceptional electrical conductivity of 1.17 × 106 S m-1, electromagnetic interference shielding effectiveness of 77.1 dB, and tensile strength of 43.4 MPa. More importantly, this heterostructure significantly improves MXene's stability against oxidation. After exposure to air for 30 days, the resultant MXene@Cu films exhibit a remarkable conductivity retention of 72.0%, significantly exceeding that of pristine MXene films (44.3%). This scalable synthesis approach holds significant promise for electronic device applications, particularly in electromagnetic shielding and thermal management.

Interleukin-9 promotes EMT-mediated PM2.5-induced pulmonary fibrosis by activating the STAT3 pathway.

This study investigated the impact of PM2.5 on promoting EMT in PM2.5-induced pulmonary fibrosis (PF) development and explored molecular mechanisms of the IL-9/STAT3/Snail/TWIST1 signaling pathway in PF owing to PM2.5. Four groups of male SD rats were formed: control (0 mg/kg.bw), low (1 mg/kg.bw), medium (5 mg/kg.bw), and high-dose (25 mg/kg.bw) PM2.5 groups. Experimental rats were subjected to PM2.5 exposure via intratracheal instillation, given once weekly for 16 weeks. 24 h after the final exposure, blood, BALF, and lung tissues were collected. Pulmonary epithelial cells underwent cultivation and exposure to varying PM2.5 concentrations with/without inhibitors for 24 h, after which total protein was extracted for relevant protein assays. The findings demonstrated that PM2.5 damaged lung tissue to different degrees and led to PF in rats. Rats subjected to PM2.5 exposure exhibited elevated concentrations of IL-9 protein in both serum and BALF, and elevated levels of IL-9 and its receptor, IL-9R, in lung tissues, compared to control counterparts. Furthermore, PM2.5-exposed groups demonstrated significantly augmented protein levels of p-STAT3, Snail, TWIST1, Vimentin, COL-I, and α-SMA, while displaying notably diminished levels of E-Cadherin compared to control group. The same findings were observed in PM2.5-treated cells. In BEAS-2B cells co-treated with Stattic (STAT3 inhibitor) and PM2.5, the opposite results occurred. Similar results were obtained for cells co-treated with IL-9-neutralizing antibody and PM2.5. Our findings suggest PM2.5 mediates PF development by promoting IL-9 expression, leading to STAT3 phosphorylation and upregulation of Snail and TWIST1 expression, triggering EMT occurrence and progression in lung epithelial cells.

CoS2/carbon network flexible film with Co-N bond/π-π interaction enables superior mechanical properties and high-rate sodium ion storage.

Flexible electrodes based on conversion-type materials have potential applications in low-cost and high-performance flexible sodium-ion batteries (FSIBs), owing to their high theoretical capacity and appropriate sodiation potential. However, they suffer from flexible electrodes with poor mechanical properties and sluggish reaction kinetics. In this study, freestanding CoS2 nanoparticles coupled with graphene oxides and carbon nanotubes (CoS2/GO/CNTs) flexible films with robust and interconnected architectures were successfully synthesized. CoS2/GO/CNTs flexible film displays high electronic conductivity and superior mechanical properties (average tensile strength of 21.27 MPa and average toughness of 393.18 KJ m-3) owing to the defect bridge for electron transfer and the formation of the π-π interactions between CNTs and GO. In addition, the close contact between the CoS2 nanoparticles and carbon networks enabled by the Co-N chemical bond prevents the self-aggregation of the CoS2 nanoparticles. As a result, the CoS2/GO/CNTs flexible film delivered superior rate capability (213.5 mAh g-1 at 6 A g-1, better than most reported flexible anode) and long-term cycling stability. Moreover, the conversion reaction that occurred in the CoS2/GO/CNTs flexible film exhibited pseudocapacitive behavior. This study provides meaningful insights into the development of flexible electrodes with superior mechanical properties and electrochemical performance for energy storage.

Sharply expanding single-atomically dispersed Fe-N active sites through bidirectional coordination for oxygen reduction.

For Fe-NC systems, high-density Fe-N sites are the basis for high-efficiency oxygen reduction reaction (ORR), and P doping can further lower the reaction energy barrier, especially in the form of metal-P bonding. However, limited to the irregular agglomeration of metal atoms at high temperatures, Fe-P bonds and high-density Fe-N cannot be guaranteed simultaneously. Here, to escape the random and violent agglomeration of Fe species during high-temperature carbonization, triphenylphosphine and 2-methylimidazole with a strong metal coordination capability are introduced together to confine Fe growth. With the aid of such bidirectional coordination, the high-density Fe-N site with Fe-P bonds is realized by in situ phosphorylation of Fe in an Fe-NC system (Fe-P-NC) at high temperatures. Impressively, the content of single-atomically dispersed Fe sites for Fe-P-NC dramatically increases from 2.8% to 65.3% compared with that of pure Fe-NC, greatly improving the ORR activity in acidic and alkaline electrolytes. The theoretical calculation results show that the generated Fe2P can simultaneously facilitate the adsorption of intermediates to Fe-N4 sites and the electron transfer, thereby reducing the reaction energy barrier and obtaining superior ORR activity.

Dual-Circularly Polarized and Flexible Metasurface Antenna Based on Graphene Assembled Film for Satellite Communications.

Traditional metal materials used in electronic devices are often problematic due to issues like bending resistance, oxidation leading to failure, and environmental pollution. To address these challenges, microwave electronic devices are constantly casting around for metal substitute materials with additional characteristics such as flexibility, anticorrosive, and eco-friendly. However, finding suitable materials that are accessible for radiofrequency (RF) applications is a difficult yet promising task. Consequently, a high-performance metasurface antenna based on highly conductive graphene films for satellite communications is developed in this paper. The proposed graphene assembled films (GAFs) have a conductivity of up to 1.13 × 106 S/m. Simulation and measurement results confirm the excellent performance of the designed antenna. Comparative experiments are also conducted on salt spray and mechanical bending between GAF antenna patterns and copper foil counterparts, further demonstrating the outstanding flexible property and corrosion resistance performance of prepared GAFs.

Fast and In-Depth Reconstruction of Two-Dimension Cobalt-Based Zeolitic Imidazolate Framework in Glucose Oxidation Processes.

Currently, metal-organic frameworks (MOFs) have emerged as viable candidates for enduring electrode materials in nonenzyme glucose sensing. However, given the inherent water susceptibility of MOFs and their complete self-reconstruction during the process of electrochemical oxygen evolution in alkaline conditions, we are motivated to explore the truth of MOFs catalyzing glucose oxidation. In this work, we fabricated a two-dimensional cobalt-based zeolitic imidazolate framework (ZIF-L) as the electrode material for catalyzing glucose oxidation in alkaline conditions. Our explorations revealed that while the initial glucose catalytic response varied among ZIF-L samples with differing thicknesses, the ultimate steady-state catalytic performance remained largely consistent. This phenomenon arose from the transformation of ZIF-L with distinct thicknesses into CoOOH with uniform morphological and structural characteristics during the glucose catalysis process. And in situ Raman spectroscopy elucidated the sustained equilibrium within the glucose catalytic system, wherein the dynamic interconversion between CoOOH and Co(OH)2 governs the overall process. This study contributes to an enhanced understanding of the glucose catalytic mechanism aspects of nonenzymatic glucose sensor electrode materials, offering insights that serve as inspiration for the development of advanced glucose electrode materials.

Accelerating the Hydrogen Production via Modifying the Fermi Surface.

The design of catalysts has attracted a great deal of attention in the field of electrocatalysis. The accurate design of the catalysts can avoid an unnecessary process that occurs during the blind trial. Based on the interaction between different metal species, a metallic compound supported by the carbon nanotube was designed. Among these compounds, RhFeP2CX (R-RhFeP2CX-CNT) was found to be in a rich-electron environment at the Fermi level (denoted as a flat Fermi surface), beneficial to the hydrogen evolution reaction (HER). R-RhFeP2CX-CNT exhibits a small overpotential of 15 mV at the current density of 10 mA·cm-2 in acidic media. Moreover, the mass activity of R-RhFeP2CX-CNT is 21597 A·g-1, which also demonstrates the advance of the active sites on R-RhFeP2CX-CNT. Therefore, R-RhFeP2CX-CNT can be an alternative catalyst applied in practical production, and the strategies of a flat Fermi surface will be a reliable strategy for catalyst designing.

Millimeter-Wave and Short-Range Wireless Communication Antenna Based on High-Conductivity Graphene-Assembled Film.

Millimeter-wave and short-range wireless communication is an important part of the Internet of Things due to its advantages of high transmission speed and large data capacity. In this paper, two antenna arrays operating at typical millimeter-wave bands (45 and 60 GHz) based on graphene-assembled films (GAF) are proposed for short-range wireless communication application. The 45 GHz graphene-assembled film antenna array is in the form of a magnetoelectric dipole antenna with a strip slot coupling to achieve bidirectional radiation, which offers an operating bandwidth of 40-49.5 GHz with a realized gain of 11.8 dBi. The 60 GHz graphene-assembled film antenna utilizes a microstrip discontinuous radiation array to achieve radiation with an operating bandwidth of 59-64 GHz, reaching the peak realized gain of 14.92 dBi over the working frequency. Finally, we proposed an experimental validation to verify the transmission performance of both antenna arrays in an actual conference room. The results show that the signal drops slowly in the room with drop rates of 0.064 dB/cm (at 45 GHz) and 0.071 dB/cm (at 60 GHz), while it steeply dropped through the wall with the drop rates of 2.3 and 3.13 dB/cm, more than 35-fold difference in signal drop rates in the room and through the wall. It has been confirmed that the proposed antenna arrays can successfully realize fast indoor short-range wireless communication while also preventing signal leakage through walls, thereby enhancing the security of information. In summary, this is the first time that we have applied graphene-based materials to millimeter-wave and short-range wireless communications, revealing the significant potential of carbon-based materials in high-frequency communication systems.

Hybrid dual-mode tunable polarization conversion metasurface based on graphene and vanadium dioxide.

We present and numerically verify a functionally hybrid dual-mode tunable polarization conversion metasurface based on graphene and vanadium dioxide (VO2). The tunable polarization converter consists of two patterned graphene layers separated by grating which is composed of gold and VO2. Due to the existence of phase change material VO2, the polarization conversion mode can be switched flexibly between the transmission and reflection modes. Theoretical calculations show the proposed polarization conversion metasurface can obtain giant asymmetric transmission (AT) at 0.42 and 0.77 THz when VO2 is in the insulating state. Conversely, when VO2 is in the metallic state, the converter switches to the reflection mode, demonstrating broadband polarization conversion for both forward and backward incidences. Furthermore, the conductivity of graphene can be modulated by changing the gate voltage, which allows dynamic control polarization conversion bandwidth of the reflection mode as well as the AT of the transmission mode. The robustness of the metasurface has also been verified, the high polarization conversion efficiency and AT can be maintained over wide incidence angles up to 65° for both the xoz plane and yoz plane. These advantages make the proposed hybrid tunable polarization conversion metasurface a promising candidate for THz radiation switching and modulation.

Anti-High-Power Microwave RFID Tag Based on Highly Thermal Conductive Graphene Films.

In this paper, a radio frequency identification (RFID) tag is designed and fabricated based on highly electrical and thermal conductive graphene films. The tag operates in the ultrahigh-frequency (UHF) band, which is suitable for high-power microwave environments of at least 800 W. We designed the protection structure to avoid charge accumulation at the antenna's critical positions. In the initial state, the read range of the anti-high-power microwave graphene film tag (AMGFT) is 10.43 m at 915 MHz. During the microwave heating experiment, the aluminum tag causes a visible electric spark phenomenon, which ablates the aluminum tag and its attachment, resulting in tag failure and serious safety issues. In contrast, the AMGFT is intact, with its entire read range curve growing and returning to its initial position as its temperature steadily decreases back to room temperature. In addition, the proposed dual-frequency tag further confirms the anti-high-power microwave performance of graphene film tags and provides a multi-scenario interactive application.

Comparison of copper and graphene-assembled films in 5G wireless communication and THz electromagnetic-interference shielding.

Since first developed, the conducting materials in wireless communication and electromagnetic interference (EMI) shielding devices have been primarily made of metal-based structures. Here, we present a graphene-assembled film (GAF) that can be used to replace copper in such practical electronics. The GAF-based antennas present strong anticorrosive behavior. The GAF ultra-wideband antenna covers the frequency range of 3.7 GHz to 67 GHz with the bandwidth (BW) of 63.3 GHz, which exceed ~110% than the copper foil-based antenna. The GAF Fifth Generation (5G) antenna array features a wider BW and lower sidelobe level compared with that of copper antennas. EMI shielding effectiveness (SE) of GAF also outperforms copper, reaching up to 127 dB in the frequency range of 2.6 GHz to 0.32 THz, with a SE per unit thickness of 6,966 dB/mm. We also confirm that GAF metamaterials exhibit promising frequency selection characteristics and angular stability as flexible frequency selective surfaces.

Ambient Electrosynthesis toward Single-Atom Sites for Electrocatalytic Green Hydrogen Cycling.

With the ultimate atomic utilization, well-defined configuration of active sites and unique electronic properties, catalysts with single-atom sites (SASs) exhibit appealing performance for electrocatalytic green hydrogen generation from water splitting and further utilization via hydrogen-oxygen fuel cells, such that a vast majority of synthetic strategies toward SAS-based catalysts (SASCs) are exploited. In particular, room-temperature electrosynthesis under atmospheric pressure offers a novel, safe, and effective route to access SASs. Herein, the recent progress in ambient electrosynthesis toward SASs for electrocatalytic sustainable hydrogen generation and utilization, and future opportunities are discussed. A systematic summary is started on three kinds of ambient electrochemically synthetic routes for SASs, including electrochemical etching (ECE), direct electrodeposition (DED), and electrochemical leaching-redeposition (ELR), associated with advanced characterization techniques. Next, their electrocatalytic applications for hydrogen energy conversion including hydrogen evolution reaction, oxygen evolution reaction, overall water splitting, and oxygen reduction reaction are reviewed. Finally, a brief conclusion and remarks on future challenges regarding further development of ambient electrosynthesis of high-performance and cost-effective SASCs for many other electrocatalytic applications are presented.

Compressed Graphene Assembled Film with Tunable Electrical Conductivity.

Graphene and graphene-based materials gifted with high electrical conductivity are potential alternatives in various related fields. However, the electrical conductivity of the macro-graphene materials is much lower than their metal counterparts. Herein, we improved the electrical conductivity of reduced graphene oxide (rGO) based graphene assembled films (GAFs) by applying a series of compressive stress and systematically investigated the relationship between the compressive stress and the electrical conductivity. The result indicates that with increasing applied compressive stress, the sheet resistance increased as well, while the thickness decreased. Under the combined effect of these two competing factors, the number of charge carriers per unit volume increased dramatically, and the conductivity of compressed GAFs (c-GAFs) showed an initial increasing trend as we applied higher pressure and reached a maximum of 5.37 × 105 S/m at the optimal stress of 450 MPa with a subsequent decrease with stress at 550 MPa. Furthermore, the c-GAFs were fabricated into strain sensors and showed better stability and sensitivity compared with GAF-based sensors. This work revealed the mechanism of the tunable conductivity and presented a facile and universal method for improving the electrical conductivity of macro-graphene materials in a controllable manner and proved the potential applications of such materials in flexible electronics like antennas, sensors, and wearable devices.

Enhanced Electromagnetic Shielding and Thermal Management Properties in MXene/Aramid Nanofiber Films Fabricated by Intermittent Filtration.

High-efficiency electromagnetic interference (EMI) shielding and heat dissipation synergy materials with flexible, robust, and environmental stability are urgently demanded in next-generation integration electronic devices. In this work, we report the lamellar MXene/Aramid nanofiber (ANF) composite films, which establish a nacre-like structure for EMI shielding and heat dissipation by using the intermittent filtration strategy. The MXene/ANF composite film filled with 50 wt % MXene demonstrates enhanced mechanical properties with a strength of 230.5 MPa, an elongation at break of 6.2%, and a toughness of 11.8 MJ·m3 (50 wt % MXene). These remarkable properties are attributed to the hydrogen bonding and highly oriented structure. Furthermore, due to the formation of the MXene conductive network, the MXene/ANF composite film shows an outstanding conductivity of 624.6 S/cm, an EMI shielding effectiveness (EMI SE) of 44.0 dB, and a superior specific SE value (SSE/t) of 18847.6 dB·cm2/g, which is better than the vacuum filtration film. Moreover, the MXene/ANF composite film also shows a great thermal conductivity of 0.43 W/m·K. The multifunctional MXene/ANF composite films with high-performance EMI shielding, heat dissipation, and joule heating show great potential in the field of aerospace, military, microelectronics, microcircuit, and smart wearable electronics.

Scalable Assembly of High-Quality Graphene Films via Electrostatic-Repulsion Aligning.

Assembling pristine graphene into freestanding films featuring high electrical conductivity, superior flexibility, and robust mechanical strength aims at meeting the all-around high criteria of new-generation electronics. However, voids and defects produced in the macroscopic assembly process of graphene nanosheets severely degrade the performance of graphene films, and mechanical brittleness often limits their applications in wide scenarios. To address such challenges, an electrostatic-repulsion aligning strategy is demonstrated to produce highly conductive, ultraflexible, and multifunctional graphene films. Typically, the high electronegativity of titania nanosheets (TiNS) induces the aligning of negatively charged graphene nanosheets via electrostatic repulsion in the film assembly. The resultant graphene films show fine microstructure, enhanced mechanical properties, and improved electrical conductivity up to 1.285 × 105 S m-1 . Moreover, the graphene films can withstand 5000 repeated folding without structural damage and electrical resistance fluctuation. These comprehensive improved properties, combined with the facile synthesis method and scalable production, make these graphene films a promising platform for electromagnetic interference (EMI) shielding and thermal-management applications in smart and wearable electronics.

Bridging sheet size controls densification of MXene films for robust electromagnetic interference shielding.

Numerous voids among the incompact layer-structure of MXene films result in their low ambient stability and poor innate conductivity for electromagnetic interference (EMI) shielding. Herein, we report a bridging-sheet-size-controlled densification process of MXene films by applying graphene oxide (GO) as a bridging agent. Specifically, the sheet size of GO is tailored to quantify a negative correlation of sheet size with densification for directing the preparation of most compact MXene-GO films. Benefiting from the shortest electron-transport-distance in the most compact structure, the conductivity of the MXene-GO film achieves 1.7 times (∼1.6 × 105 S/m) that of MXene film. The EMI shielding performance (5.2 × 106 dB/m) reaches the record-value among reported MXene films at 10 µm-scale thickness. Moreover, the compact structure boosts the ambient stability of MXene-GO films where the conductivity and EMI shielding performance remain 88.7% and 90.0% after 15 days, respectively. The findings rationale the structure-activity relationship of compact MXene films for flexible electronics.

Biosensors for rapid detection of bacterial pathogens in water, food and environment.

Conventional techniques (e.g., culture-based method) for bacterial detection typically require a central laboratory and well-trained technicians, which may take several hours or days. However, recent developments within various disciplines of science and engineering have led to a major paradigm shift in how microorganisms can be detected. The analytical sensors which are widely used for medical applications in the literature are being extended for rapid and on-site monitoring of the bacterial pathogens in food, water and the environment. Especially, within the low-resource settings such as low and middle-income countries, due to the advantages of low cost, rapidness and potential for field-testing, their use is indispensable for sustainable development of the regions. Within this context, this paper discusses analytical methods and biosensors which can be used to ensure food safety, water quality and environmental monitoring. In brief, most of our discussion is focused on various rapid sensors including biosensors and microfluidic chips. The analytical performances such as the sensitivity, specificity and usability of these sensors, as well as a brief comparison with the conventional techniques for bacteria detection, form the core part of the discussion. Furthermore, we provide a holistic viewpoint on how future research should focus on exploring the synergy of different sensing technologies by developing an integrated multiplexed, sensitive and accurate sensors that will enable rapid detection for food safety, water and environmental monitoring.

Aqueous MXene/Xanthan Gum Hybrid Inks for Screen-Printing Electromagnetic Shielding, Joule Heater, and Piezoresistive Sensor.

MXenes have exhibited potential for application in flexible devices owing to their remarkable electronic, optical, and mechanical properties. Printing strategies have emerged as a facile route for additive manufacturing of MXene-based devices, which relies on the rational design of functional inks with appropriate rheological properties. Herein, aqueous MXene/xanthan gum hybrid inks with tunable viscosity, excellent printability, and long-term stability are designed. Screen-printed flexible MXene films using such hybrid inks exhibit a high conductivity up to 4.8 × 104  S m-1 , which is suitable to construct multifunctional devices mainly including electromagnetic shielding, Joule heaters, and piezoresistive sensors. The average electromagnetic interference (EMI) shielding value can reach to 40.1 dB. In the Joule heater, the heating rate of printed MXene film can reach 20 °C s-1 under a driving voltage of 4 V, with a highest steady-state temperature of 130.8 °C. An MXene-based piezoresistive sensor prepared by the printing interdigital electrode also presents good sensing performance with a short response time of 130 ms and wide pressure region up to 30 kPa. As a result, screen-printed MXene film exhibits reinforced multifunctional performance, which is promising for application in the next-generation of intelligent and wearable devices.

Ultrafast Macroscopic Assembly of High-Strength Graphene Oxide Membranes by Implanting an Interlaminar Superhydrophilic Aisle.

A macroscopic-assembled graphene oxide (GO) membrane with sustainable high strength presents a bright future for its applications in ionic and molecular filtration for water purification or fast force response for sensors. Traditionally, the bottom-up macroscopic assembly of GO sheets is optimized by widening the interlaminar space for expediting water passage, frequently leading to a compromise in strength, assembly time, and ensemble thickness. Herein, we rationalize this strategy by implanting a superhydrophilic bridge of cobalt-based metal-organic framework nanosheets (NMOF-Co) as an additional water "aisle" into the interlaminar space of GO sheets (GO/NMOF-Co), resulting in a high-strength macroscopic membrane ensemble with tunable thickness from the nanometer scale to the centimeter scale. The GO/NMOF-Co membrane assembly time is only 18 s, 30800 times faster than that of pure GO (154 h). More importantly, the obtained membrane attains a strength of 124.4 MPa, which is more than 3 times higher than that of the GO membrane prepared through filtration. The effect of hydrophilicity on membrane assembly is also investigated by introducing different intercalants, suggesting that, except for the interlamellar spacing, the interlayered hydrophilicity plays a more decisive role in the macroscopic assembly of GO membranes. Our results give a fundamental implication for fast macroscopic assembly of high-strength 2D materials.