The cytochrome P4501A1 (CYP1A1) inhibitor bergamottin enhances host tolerance to multidrug-resistant Vibrio vulnificus infection.

PURPOSE: Vibrio vulnificus (V. Vulnificus) infection is characterized by rapid onset, aggressive progression, and challenging treatment. Bacterial resistance poses a significant challenge for clinical anti-infection treatment and is thus the subject of research. Enhancing host infection tolerance represents a novel infection prevention strategy to improve patient survival. Our team initially identified cytochrome P4501A1 (CYP1A1) as an important target owing to its negative modulation of the body's infection tolerance. This study explored the superior effects of the CYP1A1 inhibitor bergamottin compared to antibiotic combination therapy on the survival of mice infected with multidrug-resistant V. Vulnificus and the protection of their vital organs. METHODS: An increasing concentration gradient method was used to induce multidrug-resistant V. Vulnificus development. We established a lethal infection model in C57BL/6J male mice and evaluated the effect of bergamottin on mouse survival. A mild infection model was established in C57BL/6J male mice, and the serum levels of creatinine, urea nitrogen, aspartate aminotransferase, and alanine aminotransferase were determined using enzyme-linked immunosorbent assay to evaluate the effect of bergamottin on liver and kidney function. The morphological changes induced in the presence of bergamottin in mouse organs were evaluated by hematoxylin and eosin staining of liver and kidney tissues. The bacterial growth curve and organ load determination were used to evaluate whether bergamottin has a direct antibacterial effect on multidrug-resistant V. Vulnificus. Quantification of inflammatory factors in serum by enzyme-linked immunosorbent assay and the expression levels of inflammatory factors in liver and kidney tissues by real-time quantitative polymerase chain reaction were performed to evaluate the effect of bergamottin on inflammatory factor levels. Western blot analysis of IκBα, phosphorylated IκBα, p65, and phosphorylated p65 protein expression in liver and kidney tissues and in human hepatocellular carcinomas-2 and human kidney-2 cell lines was used to evaluate the effect of bergamottin on the nuclear factor kappa-B signaling pathway. One-way ANOVA and Kaplan-Meier analysis were used for statistical analysis. RESULTS: In mice infected with multidrug-resistant V. Vulnificus, bergamottin prolonged survival (p = 0.014), reduced the serum creatinine (p = 0.002), urea nitrogen (p = 0.030), aspartate aminotransferase (p = 0.029), and alanine aminotransferase (p = 0.003) levels, and protected the cellular morphology of liver and kidney tissues. Bergamottin inhibited interleukin (IL)-1ß, IL-6, and tumor necrosis factor (TNF)-α expression in serum (IL-1ß: p = 0.010, IL-6: p = 0.029, TNF-α: p = 0.025) and inhibited the protein expression of the inflammatory factors IL-1ß, IL-6, TNF-α in liver (IL-1ß: p = 0.010, IL-6: p = 0.011, TNF-α: p = 0.037) and kidney (IL-1ß: p = 0.016, IL-6: p = 0.011, TNF-α: p = 0.008) tissues. Bergamottin did not affect the proliferation of multidrug-resistant V. Vulnificus or the bacterial load in the mouse peritoneal lavage fluid (p = 0.225), liver (p = 0.186), or kidney (p = 0.637). CONCLUSION: Bergamottin enhances the tolerance of mice to multidrug-resistant V. Vulnificus infection. This study can serve as a reference and guide the development of novel clinical treatment strategies for V. Vulnificus.

Functional MRI-based biomarkers of insomnia with objective short sleep duration phenotype.

BACKGROUND: Insomnia disorder with objective short sleep duration (ISS) phenotype is a more serious biological subtype than insomnia with objective normal sleep duration (INS) phenotype, and the neuroimaging data is helpful to understand the pathophysiology of the ISS phenotype. This study was to compare the amplitude of low-frequency fluctuation (ALFF), regional homogeneity (ReHo), and functional connectivity (FC) between the ISS phenotype and the INS phenotype. METHODS: In this cross-sectional study, 55 patients with insomnia disorder were recruited, and 22 of them were defined as the ISS phenotype by the objective cardiopulmonary coupling (CPC) technique. The blood oxygen level-dependent (BOLD) sequences of all participants were obtained using the 3.0 T magnetic resonance imaging system. We analyzed and compared the ALFF, ReHo, and FC between the ISS phenotype and the INS phenotype. We also conducted Pearson's correlation analysis between significant neuroimaging biomarkers and the CPC parameters. RESULTS: The differences were not significant in ALFF (PFWE-corr＞0.05) or ReHo (PFWE-corr＞0.05) between the ISS phenotype and the INS phenotype. For the FC analysis, the ISS phenotype had a Hub-node of the left inferior occipital gyrus (IOG.L), with significantly decreased connections (p＜0.001) in the bilateral occipital, parietal, and temporal regions. The significant FCs were closely related to sleep parameters. CONCLUSION: The left inferior occipital gyrus (IOG.L), as a Hub-node with decreased functional connections, may be a potential fMRI-based biomarker of the ISS phenotype.

Exploring the dynamic adaptive responses of Epimedium pubescens to phosphorus deficiency by Integrated transcriptome and miRNA analysis.

Phosphorus, a crucial macronutrient essential for plant growth and development. Due to widespread phosphorus deficiency in soils, phosphorus deficiency stress has become one of the major abiotic stresses that plants encounter. Despite the evolution of adaptive mechanisms in plants to address phosphorus deficiency, the specific strategies employed by species such as Epimedium pubescens remain elusive. Therefore, this study observed the changes in the growth, physiological reponses, and active components accumulation in E. pubescensunder phosphorus deficiency treatment, and integrated transcriptome and miRNA analysis, so as to offer comprehensive insights into the adaptive mechanisms employed by E. pubescens in response to phosphorus deficiency across various stages of phosphorus treatment. Remarkably, our findings indicate that phosphorus deficiency induces root growth stimulation in E. pubescens, while concurrently inhibiting the growth of leaves, which are of medicinal value. Surprisingly, this stressful condition results in an augmented accumulation of active components in the leaves. During the early stages (30 days), leaves respond by upregulating genes associated with carbon metabolism, flavonoid biosynthesis, and hormone signaling. This adaptive response facilitates energy production, ROS scavenging, and morphological adjustments to cope with short-term phosphorus deficiency and sustain its growth. As time progresses (90 days), the expression of genes related to phosphorus cycling and recycling in leaves is upregulated, and transcriptional and post-transcriptional regulation (miRNA regulation and protein modification) is enhanced. Simultaneously, plant growth is further suppressed, and it gradually begins to discard and decompose leaves to resist the challenges of long-term phosphorus deficiency stress and sustain survival. In conclusion, our study deeply and comprehensively reveals adaptive strategies utilized by E. pubescens in response to phosphorus deficiency, demonstrating its resilience and thriving potential under stressful conditions. Furthermore, it provides valuable information on potential target genes for the cultivation of E. pubescens genotypes tolerant to low phosphorus.

Analysis of the effect on costochondral graft for TMJ ankylosis with jaw deformities in pediatrics.

OBJECTIVES: To evaluate the effects of costochondral grafting (CCG) used for temporomandibular joint ankylosis (TMJA) in growing patients. MATERIALS AND METHODS: Pediatric patients with TMJA treated by CCG from 2010.5 to 2021.7 were included in the study. CT scans were performed before and after operations with at least 1 year follow-up. The height of the mandibular ramus, menton deviation or retraction, osteotomy gap, etc. were measured by ProPlan CMF1.4 software. CCG growth, resorption, and relapse were evaluated and analyzed with influencing factors such as age, ostectomy gap, etc. by generalized estimating equation. RESULTS: There were 24 patients (29 joints) with an average age of 6.30 ± 3.13 years in the study. After operation, the mandibular ramus was elongated by 5.97 ± 3.53 mm. Mandibular deviation or retrusion was corrected by 4.82 ± 2.84 mm and 3.76 ± 2.97 mm respectively. After a mean follow-up of 38.91 ± 29.20 months, 58.62% CCG grew (4.18 ± 7.70 mm), 20.69% absorbed (2.23 ± 1.16 mm), and 20.69% re-ankylosed. The re-ankylosis was negatively correlated with the osteotomy gap (OR:0.348,0.172-0.702 95%CI, critical value = 6.10 mm). CCG resorption was positively correlated with the distance of CCG ramus elongation (OR:3.353,1.173-9.586 95%CI, critical value = 7.40 mm). CONCLUSIONS: An adequate osteotomy gap and CCG ramus elongation distance are the key factors for successful treatment of TMJA with jaw deformities in growing patients. CLINICAL RELEVANCE: TMJA affects mouth opening and jaw development in pediatric patients. The most common autogenous bone graft for pediatric patients is CCG due to its growth potential, convenient access and easy contouring. Also, it can simultaneously reconstruct the TMJ and improve jaw deformity by lengthening the mandibular ramus. But the growth of CCG is unpredictable. In this study, we explored several factors that may affect the absorption and re-ankylosis of CCG, expecting to provide several suggestions to improve future CCG treatment.

Occurrence of Neopestalotiopsis clavispora Causing Leaf Blight on Acer oblongum in China.

Acer oblongum is native to Southwest China and is also distributed in Nepal and Northern India. It is an excellent garden ornamental tree species, suitable for solitary planting in courtyards and parks. From June to August 2022, severe leaf blight occurred on A. oblongum in Baihe Wetland Park (32°5'42" N, 112°28'13" E) in Nanyang City, China. The foliar disease rate reached 59% (n=100). Early signs were yellow spots on the leaves, mainly on the middle and edge parts. Then, the lesions gradually expanded, became amorphous, and turned yellowish brown, eventually led to necrosis on leaves and branches. Twenty diseased leaves were collected and the junction areas between infected and healthy tissues were cut into 5 x 5 mm2 pieces. The collected plant materials were sterilized in 75% ethanol and 1% NaClO for 30 s and 1 minute, respectively, followed by rinsing in sterile water, and placing on a potato dextrose agar (PDA) plate supplemented with 50 µg ml-1 streptomycin at 25 °C for 3 days. Colony edges were cut and transferred to new PDA plates for purification culture. A total of 18 purified fungal strains were obtained, which showed similar phenotypes in morphological characteristics. All colonies had spread radially with wavy surfaces, and dense cream to white aerial hyphae. After 14 days in culture, black fruiting bodies appeared. Conidia were fusiform to slightly clavate, with five cells and two or three setae, 4.2 to 7.9 µm × 17.5 to 25.4 µm in diameter (n = 100). The apical and basal cells and setae were colorless, three median cells were brown, and the middle cell was dark brown. Morphological characteristics of all 18 strains were consistent with the genus description of Neopestalotiopsis spp. (Maharachchikumbura et al. 2014). Further molecular identification showed that the ITS region sequences of all strains have extremely high homology with Neopestalotiopsis spp. The ß-tubulin gene (TUB), and the translation elongation factor 1-alpha gene (TEF1) were amplified for molecular identification (Shu et al. 2020). The sequences of three representative strains (FE-05, 09, 16) from different regions were deposited in GenBank with accession Nos. OQ867279, OQ867288, OQ867289 (ITS), OQ870207, OQ870208, OQ870209 (TUB), and OQ870204, OQ870205, OQ870206 (TEF1). BLASTn analysis of these sequences showed 99 to 100% identity to Neopestalotiopsis clavispora strains (OK655673, MZ648263 for ITS, ON000362, MZ286974 fr TUB, MH423941, MK512481 for TEF1). These morphological features and molecular identification indicated that the pathogen has the same characteristics as N. clavispora. Pathogenicity was tested on ten healthy 3-month-old seedlings using the three representative strains through in vivo experiments. For each strain, the conidial suspension (106 conidia ml-1) in absorbent cotton balls (50 µl of inoculum) were inoculated onto the healthy leaves of two seedlings, while a total of two other plants were served with sterile water as a blank control. The plants were potted in a climate incubator at 28°C and a relative humidity of approximately 90%. Symptoms consistent with natural lesions were observed on the inoculated leaves after 5 days while the control plants remained healthy. The strains of N. clavispora were reisolated from the symptomatic inoculated leaves, fulfilling Koch's postulates. N. clavispora is known to cause disease in a variety of plants in China, such as Dendrobium officinale (Cao et al., 2022), Fragaria ananassa (Shi et al., 2022), and Garcinia mangostana (Qiu et al., 2019). To the best of our knowledge, this is the first report of N. clavispora causing leaf blight on A. oblongum in China. The yellowing and falling off of leaves would seriously affects the garden landscape. It is necessary to further clarify the host range of the pathogen to select appropriate landscape matching plants in future planning.

[Morphological study of sexual reproductive disorders in Ligusticum chuanxiong].

Chuanxiong Rhizoma is a well-known Sichuan-specific herbal medicine. Its original plant, Ligusticum chuanxiong, has been cultivated asexually for a long time. L. chuanxiong has sexual reproductive disorders, which restricts its germplasm innovation. However, there is little research on the reproductive system of L. chuanxiong. This study is based on a comparative anatomical research approach, using morphological dissection, paraffin sectioning, staining and compression, and combined with scanning electron microscopy technology, to observe and compare the flowers, fruits, and seeds at various stages of reproductive growth of L. chuanxiong and its wild relative L. sinense. The results showed that the meiosis of pollen mother cells is abnormal in L. chuanxiong anthers, and the size and number of microspores are uneven and inconsistent in the tetrad stage. tapetum cells are not completely degenerated during anther development. During the pollen ripening stage, there are fine cracks in the anther wall, while most anthers could not release pollen normally. The surface of mature pollen grains is concave and partially deformed, and the pollens are all inactive and cannot germinate in vitro. The starch, polysaccharides, and lipids in the pollen were insufficient. The filaments of L. chuanxiong are short at the flowering stage and recurved downward. Double-hanging fruits were observed in the fruiting stage, being wrinkled; with shriveled seeds. Compared with L. sinense at the same stage, the anthers of L. sinense developed normally, and the pollen grains are vigorous and can germinate in vitro. The double-hanging fruits of L. sinense are full and normal; at the flowering period, the filaments are long and erect, significantly higher than the stigma. Mature blastocysts are visible in the ovary of both L. chuanxiong and L. sinense, and there is no significant difference in stigmas. The conclusion is that during the development of L. chuanxiong stamens, the meiosis of pollen mother cells is abnormal, and tetrad, tapetum, filament and other pollen structures develop abnormally. L. chuanxiong has the characteristic of male infertility, which is an important reason for its sexual reproductive disorders.

Suppressing Ion Migration by Synergistic Engineering of Anion and Cation toward High-Performance Inverted Perovskite Solar Cells and Modules.

Ion migration-induced intrinsic instability and large-area fabrication pose a tough challenge for the commercial deployment of perovskite photovoltaics. Herein, an interface heterojunction and metal electrode stabilization strategy is developed by suppressing ion migration via managing lead-based imperfections. After screening a series of cations and nonhalide anions, the ideal organic salt molecule dimethylammonium trifluoroacetate (DMATFA) consisting of dimethylammonium (DMA+) cation and trifluoroacetate (TFA-) anion is selected to manipulate the surface of perovskite films. DMA+ enables the conversion of active excess and/or unreacted PbI2 into stable new phase DMAPbI3, inhibiting photodecomposition of PbI2 and ion migration. Meanwhile, TFA- can suppress iodide ion migration through passivating undercoordinated Pb2+ and/or iodide vacancies. DMA+ and TFA- synergistically stabilize the heterojunction interface and silver electrode. The DMATFA-treated inverted perovskite solar cells and modules achieve a maximum efficiency of 25.03% (certified 24.65%, 0.1 cm2) and 20.58% (63.74 cm2), respectively, which is the record efficiency ever reported for the devices based on vacuum flash evaporation technology. The DMATFA modification results in outstanding operational stability, as evidenced by maintaining 91% of its original efficiency after 1520 h of maximum power point continuous tracking.

Stabilizing Top Interface by Molecular Locking Strategy with Polydentate Chelating Biomaterials toward Efficient and Stable Perovskite Solar Cells in Ambient Air.

The instability of top interface induced by interfacial defects and residual tensile strain hinders the realization of long-term stable n-i-p regular perovskite solar cells (PSCs). Herein, one molecular locking strategy is reported to stabilize top interface by adopting polydentate ligand green biomaterial 2-deoxy-2,2-difluoro-d-erythro-pentafuranous-1-ulose-3,5-dibenzoate (DDPUD) to manipulate the surface and grain boundaries of perovskite films. Both experimental and theoretical evidence collectively uncover that the uncoordinated Pb2+ ions, halide vacancy, and/or I─Pb antisite defects can be effectively healed and locked by firm chemical anchoring on the surface of perovskite films. The ingenious polydentate ligand chelating is translated into reduced interfacial defects, increased carrier lifetimes, released interfacial stress, and enhanced moisture resistance, which should be liable for strengthened top interface stability and inhibited interfacial nonradiative recombination. The universality of the molecular locking strategy is certified by employing different perovskite compositions. The DDPUD modification achieves an enhanced power conversion efficiency (PCE) of 23.17-24.47%, which is one of the highest PCEs ever reported for the devices prepared in ambient air. The unsealed DDPUD-modified devices maintain 98.18% and 88.10% of their initial PCEs after more than 3000 h under a relative humidity of 10-20% and after 1728 h at 65 °C, respectively.

Simultaneous standard total joint prosthesis reconstruction with SSRO and Le Fort I osteotomy in the treatment of unilateral temporomandibular joint ankylosis with jaw deformity: a case cohort study.

OBJECTIVE: Unilateral temporomandibular joint ankylosis with jaw deformity (UTMJAJD) may require simultaneous total joint prosthesis (TJP) reconstruction, sagittal split ramus (SSRO), and Le Fort I osteotomies. The purpose of this study was to evaluate outcomes in patients treated with these procedures. METHODS: Patients diagnosed UTMJAJD between 2016 and 2018 were selected for the study. Mandible-first procedure was performed after ankylosis release with TJP on the ankylosed side and SSRO on the contralateral side. Le Fort I osteotomy with and without genioplasty was lastly performed. Maximal incisor opening (MIO), facial symmetry, and jaw and condyle stability were compared before, after operation, and during follow-ups. RESULTS: Seven patients were included in the study. Their average chin deviation was 9.5 ± 4.2 mm, and maxillary cant was 5.1 ± 3.0°. After operation, jaw deformity significantly improved, with chin deviation corrected 7.6 ± 4.1 mm (p = 0.015) and advanced 5.9 ± 2.5 mm (p = 0.006). After an average follow-up of 26.6 ± 17.1 months, MIO significantly increased from 11.4 ± 9.3 to 35.7 ± 2.6 mm (p = 0.000). The occlusion was stable with no significant positional or rotational changes of the jaw (p > 0.05). There was no obvious condylar resorption during follow-ups. CONCLUSION: Simultaneous TJP reconstruction, SSRO, and Le Fort I osteotomy are reliable and effective methods for the treatment of UTMJAJD.

Comparison of disc position stability and condylar bone remodelling between two open disc repositioning surgeries: a retrospective single-centre cohort study.

BACKGROUND AND OBJECTIVE: Open suturing (OSu) and mini-screw anchor (MsA) are two commonly used open disc repositioning surgeries for anterior disc displacement (ADD) of the temporomandibular joint (TMJ). This study assesses the differences in disc position stability (DPS) and condylar bone remodelling (CBR) between these two surgical procedures in a single centre. METHODS: A retrospective cohort study using MRI scans (pre-operation, 1 week and 12 months post-operation) of all patients who had open TMJ disc repositioning surgery from January 2016 to June 2021 at one centre through two surgical techniques (OSu and MsA) was performed. The predictor variable was technique (OSu and MsA). Outcome variables were DPS and CBR. During follow-up, DPS was rated as good, acceptable and poor, and CBR was graded as improved, unchanged, and degenerated. Multivariate analysis was used to compare the DPS and CBR at 12 months after adjusting five factors including age, sex, Wilkes stage, preoperative bone status (normal, mild/moderate abnormal) and the degree of disc repositioning (normal, overcorrected, and posteriorly repositioned). Relative risk (RR) for DPS and CBR was calculated by multivariate logistic regression. RESULTS: Three hundred eighty-five patients with 583 joints were included in the study. MRIs at 12 months showed that 514 joints (93.5%) had good DPS, and 344 joints (62.5%) had improved CBR. Multivariate analysis revealed that OSu had higher DPS (RR=2.95; 95% CI, 1.27-6.85) and better CBR (RR=1.58; 95% CI, 1.02-2.46) than MsA. Among the factors affecting DPS, females had better results than males (RR=2.63; 95% CI, 1.11-6.26) and overcorrected or posteriorly repositioned discs were more stable than normally repositioned discs (RR=5.84; 95% CI, 2.58-13.20). The improvement in CBR decreased with age increasing (RR=0.91; 95% CI, 0.89-0.93). Preoperative mild/moderate abnormal bone status had a higher probability of improved CBR compared to normal preoperative bone status (RR=2.60; 95% CI, 1.76-3.83). CONCLUSION: OSu had better DPS and CBR than MsA. Sex and the degree of disc repositioning impacted DPS, while age and preoperative bone status affected CBR.

Occurrence of Fusarium fujikuroi Causing Fusarium Wilt on Carthusian Pink in China.

Carthusian pink (Dianthus carthusianorum) is native to Europe and is widely grown in China for landscaping. In September 2022, wilting symptoms of carthusian pink were found in Xixia City (33°18'31″ N, 111°29'45″ E), Henan Province, China, with a disease incidence of 65%. Approximately 100 plants were surveyed on the landscaping lawns of the park. Initial symptoms were yellow to brown lesions on the base of stems and leaves. Later, the lesions spread throughout the plants, turning leaves yellow, and leading to root and leaf rot. Eventually, the plants shriveled and died (Figure S1a). Thirty diseased tissues isolated from the roots and leaves were cut into 5×5 mm pieces, which were surface sterilized with 75% ethanol solution for 30 seconds and 1% NaClO solution for 1 minute, rinsed three times in sterilized water, placed on potato dextrose agar (PDA) plates supplemented with 50 µg ml-1 streptomycin, and incubated at 28°C for five days. A total of 25 purified fungal strains with similar phenotypic features were obtained. Three representative strains named OSZ-P1, OSZ-P2, and OSZ-P3 were selected for identification. Fungal colonies developed an abundant aerial mycelium, initially white, which subsequently developed red to purple pigments (Figure S1b). Macroconidia were slender, straight, and measured 12.74 to 49.39 × 2.07 to 4.39 µm (n=50), with two to five septa. Microconidia were clavate and measured 6.31 to 11.61 × 2.15 to 4.02 µm (n=50) (Figure S1c). These morphological characteristics were consistent with Fusarium spp.. The rDNA internal transcribed spacer (ITS), ß-tubulin gene (tub2), translation elongation factor 1-alpha gene (tef1), calmodulin (cmdA), RNA polymerase largest subunit (rpb1), and RNA polymerase II second largest subunit (rpb2) were amplified with primers ITS1/ITS4, BT-2a/BT-2b, EF1/EF2, CL1/CL2A, Fa/G2R, and 5F2/7Cr, respectively, for further identification (Yilmaz et al. 2021, O'Donnell et al. 2022). ITS (OQ726389, OQ726390, OQ726391), tub2 (OQ730191, OQ789645, OQ789646), tef1 (OR088904, OR088905, OR088906), cmdA (OR133730, OR133731, OR133732), rpb1 (OR088907, OR088908, OR133729), and rpb2 (OR133733, OR133734, OR133735) nucleotide sequences of the strains OSZ-P1, OSZ-P2, and OSZ-P3 were submitted to GenBank. BLASTn analysis of OSZ-P1 sequences exhibited 99 to 100% similarity with Fusarium fujikuroi sequences (strains Augusto2, I1.3, and CSV1) CP023096, CP023108, CP023084 of cmdA, CP023089, CP023077 of rpb1, and CP023093, CP023105, CP023081 of rpb2. A Phylogenetic tree was constructed of combined genes (tub2, tef1, cmdA, rpb1, rpb2) of sequences, alongside the sequences of the type strains by the neighbor-joining method. The three strains formed a clade with the type strains CBS257.52 and Augusto2 of F. fujikuroi in phylogenetic trees, being clearly separated from other Fusarium spp. (Figure S2). The morphological features and molecular analyses supported the strains as members of F. fujikuroi. To verify the pathogenicity, aboveground parts of the plants of five healthy six-month-old potted plants were sprayed with 100 µl of conidial suspension per pot (106 conidia ml-1), and five similar plants were sprayed with sterilized water as a control. All plants were placed in a climate incubator at 28°C and 90% relative humidity. Seven days after inoculation, withered and yellowed lesions were observed, similar to the natural lesions (Figure S1e). No symptoms were observed on the control plants. The whole pathogenicity tests were performed thrice. Reisolation resulted in cultures that were morphologically and molecularly identical to the original isolates, fulfilling Koch's postulates. Fusarium wilt disease has been reported on other plants of the genus Dianthus. Vascular wilt on Dianthus caryophyllus (carnation) caused by Fusarium oxysporum is the most destructive disease of carnation crops worldwide (Ardila et al. 2014). Fusarium acuminatum causing Dianthus chinensis root rot and foliage blight has recently been reported in Nanjing, China (Xu et al. 2022). To our knowledge, this is the first report of F. fujikuroi causing Fusarium wilt on carthusian pink worldwide. The host range of F. fujikuroi still needs to be clarified for accurate disease management in the selection of plant species for landscape.

Analysis of joint protein expression profile in anterior disc displacement of TMJ with or without OA.

OBJECTIVE: Anterior disc displacement (ADD) is a common clinical issue and may cause osteoarthritis (OA). However, the research of protein changes in synovial fluid as disease development marker and potential treatment clue is still insufficient. MATERIALS AND METHODS: We conducted the high-resolution mass spectrometry (MS) of synovial fluid collected from 60 patients with normal disk position to ADD and ADD with osteoarthritis (OA). The proteins with significant changes among the 3 groups were analyzed by biological information and further validated by in primary rat condyle chondrocytes and OA animal model. RESULTS: FGL2, THBS4, TNC, FN1, OMD etc. were significantly increased in ADD without OA (p < 0.05), which reflected the active extracellular matrix and collagen metabolism. FGFR1, FBLN2, GRB2 etc. were significantly increased in ADD with OA group (p < 0.05), which revealed an association with apoptosis and ferroptosis. Proteins such as P4HB, CBLN4, FHL1, VIM continuously increase in the whole disease progress (p < 0.05). Both the in vitro and in vivo results are consistent with protein changes detected in MS profile. CONCLUSION: This study firstly provides the expression changes of proteins from normal disc condyle relationship toward ADD with OA, which can be selected and studied further as disease progress marker and potential treatment targets.

Polydentate Ligand Reinforced Chelating to Stabilize Buried Interface toward High-Performance Perovskite Solar Cells.

The instability of the buried interface poses a serious challenge for commercializing perovskite photovoltaic technology. Herein, we report a polydentate ligand reinforced chelating strategy to strengthen the stability of buried interface by managing interfacial defects and stress. The bis(2,2,2-trifluoroethyl) (methoxycarbonylmethyl)phosphonate (BTP) is employed to manipulate the buried interface. The C=O, P=O and two -CF3 functional groups in BTP synergistically passivate the defects from the surface of SnO2 and the bottom surface of the perovskite layer. Moreover, The BTP modification contributes to mitigated interfacial residual tensile stress, promoted perovskite crystallization, and reduced interfacial energy barrier. The multidentate ligand modulation strategy is appropriate for different perovskite compositions. Due to much reduced nonradiative recombination and heightened interface contact, the device with BTP yields a promising power conversion efficiency (PCE) of 24.63 %, which is one of the highest efficiencies ever reported for devices fabricated in the air environment. The unencapsulated BTP-modified devices degrade to 98.6 % and 84.2 % of their initial PCE values after over 3000 h of aging in the ambient environment and after 1728 h of thermal stress, respectively. This work provides insights into strengthening the stability of the buried interface by engineering multidentate chelating ligand molecules.

Rationally Tailoring Chiral Molecules to Minimize Interfacial Energy Loss Enables Efficient and Stable Perovskite Solar Cells Using Vacuum Flash Technology.

Facing the defects and energy barrier at the interface of perovskite solar cells, we propose a chiral molecule engineering strategy to simultaneously heal interfacial defects and regulate interfacial energy band alignment. S-ibuprofen (S-IBU), R-ibuprofen (R-IBU), and racemic ibuprofen (rac-IBU) are used to post-treat perovskite films. rac-IBU molecules possess the strongest anchoring on the surface of perovskites among all chiral molecules, translating into the best defect passivation effect. The hydrophobic isobutyl group and benzene ring could increase the film moisture resistance ability. Due to reduced interfacial defects and interfacial energy barrier, rac-IBU enables efficient devices with a maximum efficiency exceeding 24% based on vacuum flash technology without antisolvents. The encapsulated rac-IBU-modified device could maintain 90% of its initial performance after 1040 h of continuous maximum power point tracking. This work provides a feasible route to minimize interfacial nonradiative recombination losses by controlling spatial conformation via rational chiral molecule engineering.

Effect the accumulation of bioactive constituents of a medicinal plant (Salvia Miltiorrhiza Bge.) by arbuscular mycorrhizal fungi community.

BACKGROUND: Arbuscular mycorrhizal fungi (AMF) form symbiotic relationships with various terrestrial plants and have attracted considerable interest as biofertilizers for improving the quality and yield of medicinal plants. Despite the widespread distribution of AMFs in Salvia miltiorrhiza Bunge's roots, research on the impact of multiple AMFs on biomass and active ingredient accumulations has not been conducted. In this study, the effects of five native AMFs (Glomus formosanum, Septoglomus constrictum, Rhizophagus manihotis, Acaulospora laevis, and Ambispora gerdemannii) and twenty-six communities on the root biomass and active ingredient concentrations of S. miltiorrhiza were assessed using the total factor design method. RESULTS: Thirty-one treatment groups formed symbiotic relationships with S. miltiorrhiza based on the pot culture results, and the colonization rate ranged from 54.83% to 89.97%. AMF communities had higher colonization rates and total phenolic acid concentration than single AMF, and communities also appeared to have higher root fresh weight, dry weight, and total phenolic acid concentration than single inoculations. As AMF richness increased, there was a rising trend in root biomass and total tanshinone accumulations (ATTS), while total phenolic acid accumulations (ATP) showed a decreasing trend. This suggests that plant productivity was influenced by the AMF richness, with higher inoculation benefits observed when the communities contained three or four AMFs. Additionally, the affinities of AMF members were also connected to plant productivity. The inoculation effect of closely related AMFs within the same family, such as G. formosanum, S. constrictum, and R. manihotis, consistently yielded lower than that of mono-inoculation when any combinations were applied. The co-inoculation of S. miltiorrhiza with nearby or distant AMFs from two families, such as G. formosanum, R. manihotis, and Ac. laevis or Am. gerdemannii resulted in an increase of ATP and ATTS by more than 50%. AMF communities appear to be more beneficial to the yield of bioactive constituents than the single AMF, but overall community inoculation effects are related to the composition of AMFs and the relationship between members. CONCLUSION: This study reveals that the AMF community has great potential to improve the productivity and the accumulation of bioactive constituents in S. miltiorrhiza, indicating that it is an effective way to achieve sustainable agricultural development through using the AMF community.

Global incidence and death estimates of chronic kidney disease due to hypertension from 1990 to 2019, an ecological analysis of the global burden of diseases 2019 study.

BACKGROUND: The intricate relationship between hypertension and chronic kidney disease (CKD) presents a global challenge for prevention of hypertension-related CKD. This study's objective is to analyze age, gender, regional disparities, and evolving trends in the disease burden of hypertension-related CKD. We aim to estimate changing spatial and temporal trends in incidence and mortality rates, considering the socio-demographic index (SDI), to inform health strategies effectively. METHOD: Age-standardized incidence rates (ASIR) and death rates (ASDR) were collected from the GBD 2019. Trend analysis was conducted by Joinpoint regression of ASRs from 1990 to 2019. Spatial autocorrelation analysis was performed to obtain spatial patterns. The association between SDI and burden of CKD due to hypertension was estimated using a Pearson correlation analysis. RESULTS: The global ASIR and ASDR due to hypertension-related CKD were 19.45 (95% CI, 17.85 to 21.09) and 5.88 (95% CI, 4.95 to 6.82) per 100 K population in 2019, representing increases of 17.89% and 13.29% compared to 1990, respectively. The elderly population and males were found the highest ASIR and ASDR. The high SDI region had the highest ASIRs, while low SDI regions experienced the highest ASDRs. Joinpoint regression found both global ASIR and ASDR showed increasing trends, with the highest increases observed in middle- and high-SDI regions, respectively. The SDI exhibited a positive association with ASIRs but displayed an inverse V-shaped correlation with the average annual percentage change (AAPC) of ASIRs. Spatial autocorrelation analysis revel significant positive spatial autocorrelation for the AAPC of ASDRs and ASIRs, from 1990 to 2019. CONCLUSIONS: Results met the objectives, and demonstrated a rising global burden of hypertension-related CKD. Factors such as aging, gender, and regional variations should be considered when designing control measures and developing healthcare systems to effectively address the burden of this complex condition.

Transcriptomics combined with physiological analysis reveals the mechanism of cadmium uptake and tolerance in Ligusticum chuanxiong Hort. under cadmium treatment.

Introduction: Ligusticum chuanxiong Hort. is a widely used medicinal plant, but its growth and quality can be negatively affected by contamination with the heavy metal cadmium (Cd). Despite the importance of understanding how L. chuanxiong responds to Cd stress, but little is currently known about the underlying mechanisms. Methods: To address this gap, we conducted physiological and transcriptomic analyses on L. chuanxiong plants treated with different concentrations of Cd2+ (0 mg·L-1, 5 mg·L-1, 10 mg·L-1, 20 mg·L-1, and 40 mg·L-1). Results: Our findings revealed that Cd stress inhibited biomass accumulation and root development while activating the antioxidant system in L. chuanxiong. Root tissues were the primary accumulation site for Cd in this plant species, with Cd being predominantly distributed in the soluble fraction and cell wall. Transcriptomic analysis demonstrated the downregulation of differential genes involved in photosynthetic pathways under Cd stress. Conversely, the plant hormone signaling pathway and the antioxidant system exhibited positive responses to Cd regulation. Additionally, the expression of differential genes related to cell wall modification was upregulated, indicating potential enhancements in the root cell wall's ability to sequester Cd. Several differential genes associated with metal transport proteins were also affected by Cd stress, with ATPases, MSR2, and HAM3 playing significant roles in Cd passage from the apoplast to the cell membrane. Furthermore, ABC transport proteins were found to be key players in the intravesicular compartmentalization and efflux of Cd. Discussion: In conclusion, our study provides preliminary insights into the mechanisms underlying Cd accumulation and tolerance in L. chuanxiong, leveraging both physiological and transcriptomic approaches. The decrease in photosynthetic capacity and the regulation of plant hormone levels appear to be major factors contributing to growth inhibition in response to Cd stress. Moreover, the upregulation of differential genes involved in cell wall modification suggests a potential mechanism for enhancing root cell wall capabilities in isolating and sequestering Cd. The involvement of specific metal transport proteins further highlights their importance in Cd movement within the plant.

Genotype-Controlled Vertical Transmission Exerts Selective Pressure on Community Assembly of Salvia miltiorrhiza.

The plant's endophytic fungi play an important role in promoting host development and metabolism. Studies have shown that the factors affecting the assembly of the endophyte community mainly include host genotype, vertical transmission, and soil origin. However, we do not know the role of vertically transmitted endohytic fungi influences on the host-plant's endophytic community assembly. Salvia miltiorrhiza from three production areas were used as research objects; we constructed three production area genotypes of S. miltiorrhiza regenerated seedlings simultaneously. Based on high-throughput sequencing, we analyzed the effects of genotype, soil origin, and vertical transmission on endophytic fungal communities. The results show that the community of soil origins significantly affected the endophytic fungal community in the regenerated seedlings of S. miltiorrhiza. The influence of genotype on community composition occurs through a specific mechanism. Genotype may selectively screen certain communities into the seed, thereby exerting selection pressure on the community composition process of offspring. As the number of offspring increases gradually, the microbiota, controlled by genotype and transmitted vertically, stabilizes, ultimately resulting in a significant effect of genotype on community composition.Furthermore, we observed that the taxa influencing the active ingredients are also selected as the vertically transmitted community. Moreover, the absence of an initial vertically transmitted community in S. miltiorrhiza makes it more vulnerable to infection by pathogenic fungi. Therefore, it is crucial to investigate and comprehend the selection model of the vertically transmitted community under varying genotypes and soil conditions. This research holds significant implications for enhancing the quality and yield of medicinal plants and economic crops.

Computational modelling of the fossa component fixation associated with alloplastic total temporomandibular joint replacements.

The alloplastic total temporomandibular joint (TMJ) replacement is a complex surgical approach to end-stage TMJ disorders. The fixation of TMJ prostheses remains a critical issue for implant design and performance. For the fossa component, it is generally considered to use fixation screws to achieve tripod stability. However, the fossa may still come loose, and the mechanism remains unknown. A computational framework, consisting of a musculoskeletal model for calculating muscle and TMJ forces, and a finite element model for the fossa fixation simulation, was developed. A polyethylene (PE) fossa with stock prosthesis design was analyzed to predict contact pressures at the fixation interfaces, and stresses/strains in the fossa implant and bone during the static loading of normal chewing bite and maximum-force bite. The predicted maximum von Mises stresses were 33 MPa and 44 MPa for the bone, 13 MPa and 28 MPa for the PE fossa, and 131 MPa and 244 MPa for the screws, for the normal and maximum bites, respectively; the peak minimum principal strain was in the range of -2514 ∼ -3545 µÎµ for the bone. The results show that the sufficient initial mechanical strength of the fossa component fixation can be established using the screws in combination with bone support. The functional loads applied through the prosthetic TMJ bearing can be largely transferred to supporting bone without causing high level stresses. Tightening fixation screws with a pretension of 100 N can reduce transverse load to the screws and help prevent screw loosening. Further research is recommended to accurately quantify the transverse load and its influence on screw loosening during dynamic loading, and the frictional properties at the bone-implant interface.