Plastic takeaway food containers may cause human intestinal damage in routine life usage: Microplastics formation and cytotoxic effect.

The microplastics and organic additives formed in routine use of plastic takeaway food containers may pose significant health risks. Thus, we collected plastic containers made of polystyrene, polypropylene, polyethylene terephthalate, polylactic acid and simulated two thermal usages, including hot water (I) and microwave treatments (M). Nile Red fluorescence staining was developed to improve accurate counting of microplastics with the aid of TEM and DLS analysis. The quantity of MPs released from thermal treatments was determined ranging from 285.7 thousand items/cm2 to 681.5 thousand items/cm2 in containers loaded with hot water with the following order: IPS>IPP>IPET>IPLA, while microwave treatment showed lower values ranging from 171.9 thousand items/cm2 to 301.6 thousand items/cm2. In vitro toxicity test using human intestinal epithelial Caco-2 cells indicated decrease of cell viability in raw leachate, resuspended MPs and supernatants, which might further lead to cell membrane rupture, ROS production, and decreased mitochondrial membrane potential. Moreover, the leachate inhibited the expression of key genes in the electron transport chain (ETC) process, disrupted energy metabolism. For the first time, we isolate the actually released microplastics and organic substances for in vitro toxicity testing, and demonstrate their potential impacts to human intestine. SYNOPSIS: Plastic take-out containers may release microplastics and organic substances during daily usage, both of which can cause individual and combined cytotoxic effects on human colon adenocarcinoma cells Caco-2.

Risk assessment of e-waste - Liquid Crystal Monomers re-suspension caused by coastal dredging operations.

The Pearl River Estuary (PRE), one of the primary e-waste recycling centers in the world, has been suffering from the pollution of Liquid Crystal Monomers (LCMs), critical materials with persistent, bio-accumulative, and toxic substances used in electronic devices. It has been detected in seabed sediment with both high frequency and concentration near PRE - Hong Kong (HK) waters. In the same area, dredging operations with in-situ sediment have been frequently used in the last decades for coastal land reclamation projects. Dredging is known to cause a huge amount of sediment re-suspension into water columns, with potential damage to marine ecosystems and biodiversity. In this study, we proposed a new risk assessment strategy to estimate the secondary pollution due to the re-suspension sediment highly contaminated by LCMs. We formulate a robust and reliable probabilistic approach based on unsupervised machine learning and hydrodynamic and sediment transport numerical simulation. New risk indexes were also proposed to better quantify the impact of contaminated sediments. We applied the methodology to assess the potential impact of dredging operations in the PRE and Hong Kong waters on the local marine ecosystem. The results of the analysis showed how the potentially contaminated areas depended on the dredging locations.

Dissolved organic matter composition and characteristics during extreme flood events in the Yangtze River Estuary.

Understanding the molecular composition and fate of dissolved organic matter (DOM) during transport in estuaries is essential for gaining a comprehensive understanding of its role within the global biogeochemical cycle. In 2020, a catastrophic flood occurred in the Yangtze River basin. It is currently unknown whether differences in hydrologic conditions due to extreme flooding will significantly impact the estuarine to oceanic DOM cycle. We determined the DOM composition in the Yangtze River estuary (YRE) to the East China Sea by using Fourier transform ion cyclotron resonance mass spectrometry (FT-ICR MS) during the high discharge and the flood period (monthly average discharge was 1.2 times higher) on the same trajectory. Our study found that the composition of DOM is more diverse, and more DOM molecules were introduced to the YRE during the flood, especially in the freshwater end member. The result revealed that the DOM was significantly labile and unstable during the flood period. A total of 1840 unique molecular formulas were identified during the flood period, most of which were CHON, CHONS, and CHOS compounds, most likely resulting from anthropogenic inputs from upstream. Only 194 of these molecules were detected in the seawater end member after transporting to the sea, suggesting that the YRE served as a 'filter' of DOM. However, the flood enhances the transport of a group of terrigenous DOM, that is resistant to photodegradation and biodegradation. As a result, YRE experienced ~1.6 times higher terrigenous DOC flux than high discharge period. Considering the increased frequency of future floods, our study provides a preliminary basis for further research on how floods affect the composition and characteristics of estuarine DOM. With the help of the FT-ICR MS technique, we can now better understand the dynamic of DOM composition and characteristics in large river estuaries.

Self-motivated photoaging of microplastics by biochar-dissolved organic matter under different pyrolysis temperatures.

Dissolved organic matter (DOM) released from biochar (BDOM) can interact with microplastics (MPs) in the environment, inevitably affecting their environmental behaviour. Information regarding the influence of BDOM on MPs during photoaging and associated variations in the MP aging mechanism remains unclear. This study evaluated the effect of BDOM on the aging of polystyrene (PS) MPs. The results showed that among three pyrolysis temperatures, low-temperature BDOM significantly enhanced the photoaging process of PS MPs, with the smallest average particle size and highest carbonyl index value after 15 days of aging under light conditions. The DOM level decreased after 5 days, increased after 5-10 days, and stabilised after 15 d. BDOM accelerates PS MPs aging, leading to more DOM released from PS, which can be transformed into 1O2 via triplet-excited state (3DOM⁎ and 3PS⁎) to further enhance PS MPs aging, resulting in the realisation of the self-accelerated aging process of PS MPs. 1O2 plays a crucial role in the self-motivated accelerated aging process of PS MPs. These findings provide new insights into the effects of the DOM structure and composition on reactive oxygen species generation during MPs aging.

Evolution of dissolved organic nitrogen chemistry during transportation to the marginal sea: Insights from nitrogen isotope and molecular composition analyses.

Estuaries are hotspots where terrestrially originated dissolved organic matter (DOM) is modified in molecular composition before entering marine environments. However, very few research has considered nitrogen (N) modifications of DOM molecules in estuaries, limiting our understanding of dissolved organic nitrogen (DON) cycling and the associated carbon cycling in estuaries. This study integrated optical, stable isotopes (δ15N and δ13C) and molecular composition (FT-ICR MS) to characterize the transformation of DOM in the Yangtze River Estuary. Both concentration of dissolved organic carbon (DOC) and DON decreased with increasing salinity, while their δ13C and δ15N increased with the increasing salinity. A significant positive correlation was found between δ15N and δ13C during the transportation of DOM to marginal seas, indicating that the behavior of both DOC and DON are primarily controlled by the mixing of freshwater and the seawater in the YRE. During the mixing process, the DON addition was observed using the conservative mixing curves. In the view of molecular composition, DOM molecules became more aromatic as the number of N atoms increased. Spearman correlations reveal that DOM molecules with fewer N atoms exhibited a higher enrichment in protein-like components, while those with more N atoms were more enriched in humic-like components. In addition, the δ15N and δ13C tended to increase as the N content of DOM decreased. Therefore, DON molecules with fewer N atoms were likely to be transformed into those with more N atoms based on the isotopic fractionation theory. This study establishes a linkage between the molecular composition and the δ15N of DOM, and discovers the N transformation pattern within DOM molecules during the transportation to marginal seas.

Degradation of organic UV filters in the water environment: A concise review on the mechanism, toxicity, and technologies.

Organic ultraviolet filters (OUVFs) have been used globally for the past 20 years. Given that OUVFs can be quickly released from sunscreens applied on human skins, they have been frequently detected in aquatic environments and organisms. Some byproducts of OUVFs might be more recalcitrant and toxic than their parent compounds. To further assess the toxicity and potential risk of OUVFs' byproducts, it is necessary to determine the fate of OUVFs and identify their transformation products. This review summarizes and analyzes pertinent literature and reports in the field of OUVFs research. These published research works majorly focus on the degradation mechanisms of OUVFs in aquatic environments, their intermediates/byproducts, and chlorination reaction. Photodegradation (direct photolysis, self-sensitive photolysis and indirect photolysis) and biodegradation are the main transformation pathways of OUVFs through natural degradation. To remove residual OUVFs' pollutants from aqueous environments, novel physicochemical and biological approaches have been developed in recent years. Advanced oxidation, ultrasound, and bio-based technologies have been proven to eliminate OUVFs from wastewaters. In addition, the disinfection mechanism and the byproducts (DBPs) of various OUVFs in swimming pools are discussed in this review. Besides, knowledge gaps and future research directions in this field of study are also mentioned.

Occurrence, behavior and fate of liquid crystal monomers in municipal wastewater.

Liquid crystal monomers (LCMs), the essential substances used in the display screen of electronic devices, have been proposed as a class of emerging chemicals of concern. Despite their detection in various environmental matrices, little is known about the presence of LCMs in municipal sewage systems. This study aimed to investigate the occurrence, distribution, and fate of 64 LCMs released into the aqueous environment from a municipal wastewater treatment plant (WWTP) in Hong Kong, China. In total 14 LCMs were detected in WWTP samples. Specifically, the Σ14LCMs concentrations in crude influent, final effluent, and final sludge were found to be 16.8 ± 0.3 ng/L, 2.71 ± 0.05 ng/L, and 19.2 ± 1.0 ng/g dry weight, respectively. Among them, 10 fluorinated LCMs (F-LCMs) were determined to be present at concentrations of 8.90 ± 0.10 ng/L, 1.69 ± 0.05 ng/L, and 9.94 ± 1.00 ng/g dry weight, respectively. The predominant non-fluorinated LCMs (NF-LCMs) detected in all samples were 3OCB and EPhEMOB, while 2OdF3B was the dominant F-LCM. The overall removal rate of total LCMs was 83.8 ± 0.3 %, with 25.4 ± 4.8 % being removed by biodegradation and UV treatment. Compared to NF-LCMs, F-LCMs were more resistant to biodegradation. Despite the significant removal of LCMs through WWTP, the remaining LCMs in final effluent could result in an annual emission of 3.04 kg of total LCMs from the population of Hong Kong. This study provides the first evidence of LCMs contamination in municipal wastewater, possibly arising from routine electronic devices usage. Further investigation is needed to elucidate the potential impact of LCMs emission via WWTP effluent on the aquatic receiving ecosystem.

Identification of Transformation Products of Organic UV Filters by Photooxidation and Their Differential Estrogenicity Assessment.

Organic ultraviolet filters (OUVFs) are extensively released into aquatic environments, where they undergo complex phototransformation. However, there is little knowledge regarding their transformation products (TPs) and associated endocrine disruption potentials. In the present study, we characterized the chemical and toxicological profiles of TPs for two common OUVFs, oxybenzone (BP3) and ethylhexyl methoxycinnamate (EHMC), by photooxidation under environmentally relevant conditions. It is hypothesized that TPs of the tested OUVFs will show varied estrogenicity at different reaction times. High-resolution liquid chromatography quadrupole time-of-flight mass spectrometry (LC-QTOF-MS) identified 17 TPs of 7 m/z for BP-3 and 13 TPs of 8 m/z for EHMC at confidence levels ≤2. Five novel TPs of 2 m/z were reported for the first time with structure-diagnostic MS/MS spectra. Estrogenicity assessment using the MCF-7-luc cell line showed discrepant estrogenic activities exhibited by OUVF-TPs over time. Specifically, BP3-TPs exhibited significantly greater estrogenicity than the parent at several reaction times, whereas EHMC-TPs displayed fluctuating estrogenicity with a declining trend. Correlation analysis coupled with molecular docking simulations further suggested several TPs of BP3 as potential endocrine disruptive compounds. These findings underscore the necessity of considering mixtures during chemical testing and risk assessment and highlight the potentially greater risks associated with post-transformation cocktails.

Liquid crystal monomers in ventilation and air conditioning dust: Indoor characteristics, sources analysis and toxicity assessment.

Indoor dust contaminated with liquid crystal monomers (LCMs) released from various commercial liquid crystal display (LCD) screens may pose environmental health risks to humans. This study aimed to investigate the occurrence of 64 LCMs in ventilation and air conditioning filters (VACF) dust, characterize their composition profiles, potential sources, and associations with indoor characteristics, and assess their in vitro toxicity using the human lung bronchial epithelial cells (BEAS-2B). A total of 31 LCMs with concentrations (ΣLCMs) ranging from 43.7 ng/g to 448 ng/g were detected in the collected VACF dust. Additional analysis revealed the potential interactions between indoor environmental conditions and human exposure risks associated with the detected LCMs in VACF dust. The service area and working time of the ventilation and air conditioning system, and the number of indoor LCD screens were positively correlated with the fluorinated ΣLCMs in VACF dust (r = 0.355 âˆ¼ 0.511, p < 0.05), while the associations with the non-fluorinated ΣLCMs were not found (p > 0.05), suggesting different environmental behavior and fates of fluorinated and non-fluorinated LCMs in the indoor environment. Four main indoor sources of LCMs (i.e., computer (37.1%), television (28.3%), Brand A smartphone (21.2%) and Brand S smartphone (13.4%)) were identified by positive matrix factorization-multiple linear regression (PMF-MLR). Exposure to 14 relatively frequently detected LCMs, individually and in the mixture, induced significant oxidative stress in BEAS-2B cells. Among them, non-fluorinated LCMs, specifically 3cH2B and MeP3bcH, caused dominant decreased cell viability. This study provides new insights into the indoor LCMs pollution and the associated potential health risks due to the daily use of electronic devices.

Release Behavior of Liquid Crystal Monomers from Waste Smartphone Screens: Occurrence, Distribution, and Mechanistic Modeling.

Liquid crystal display (LCD) screens can release many organic pollutants into the indoor environment, including liquid crystal monomers (LCMs), which have been proposed as a novel class of emerging pollutants. Knowing the release pathways and mechanisms of LCMs from various components of LCD screens is important to accurately assess the LCM release and reveal their environmental transport behavior and fate in the ambient environment. A total of 47, 43, and 33 out of 64 target LCMs were detected in three disassembled parts of waste smartphone screens, including the LCM layer (LL), light guide plate (LGP), and screen protector (SP), respectively. Correlation analysis confirmed LL was the source of LCMs detected in LGP and SP. The emission factors of LCMs from waste screen, SP, and LGP parts were estimated as 2.38 × 10-3, 1.36 × 10-3, and 1.02 × 10-3, respectively. A mechanism model was developed to describe the release behaviors of LCMs from waste screens, where three characteristics parameters of released LCMs, including average mass proportion (AP), predicted subcooled vapor pressures (PL), and octanol-air partitioning coefficients (Koa), involving coexistence of absorption and adsorption mechanisms, could control the diffusion-partitioning. The released LCMs in LGP could reach diffusion-partition equilibrium more quickly than those in SP, indicating that LCM release could be mainly governed through SP diffusions.

Removing emerging e-waste pollutant DTFPB by synchronized oxidation-adsorption Fenton technology.

Liquid crystal monomers (LCMs), an emerging group of organic pollutants related to electronic waste, have been frequently detected from various environmental matrices, including landfill leachate. The persistence of LCMs requires robust technology for remediation. The objectives of this study were to evaluate the feasibility, performance and mechanism of the remediation of a typical LCM 4-[difluoro(3,4,5-trifluorophenoxy)methyl]- 3,5-difluoro-4'-propylbiphenyl (DTFPB) via synchronized oxidation-adsorption (SOA) Fenton technology and verify its application in DTFPB-contaminated leachate. The SOA Fenton system could effectively degrade 93.5% of DTFPB and 5.6% of its total organic carbon (TOCDTFPB) by hydroxyl radical oxidation (molar ratio of Fe2+ to H2O2 of 1/4 and pH 2.5-3.0) following a pseudo-first-order model under 0.378 h-1. Additionally, synchronized adsorption of DTFPB and its degradation intermediates by in situ resultant ferric particles via hydrophobic interaction, complexation, and coprecipitation contributed to almost 100% of DTFPB and 33.4% of TOCDTFPB removal. Three possible degradation pathways involving eight products were proposed, and hydrophobic interactions might drive the adsorption process. It was first confirmed that the SOA Fenton system exhibited good performance in eliminating DTFPB and byproducts from landfill leachate. This study provides new insights into the potential of the Fenton process for the treatment of emerging LCMs contamination in wastewater.

Coupling iron-carbon micro-electrolysis with persulfate advanced oxidation for hydraulic fracturing return fluid treatment.

Improving the sustainability of the hydraulic fracturing water cycle of unconventional oil and gas development needs an advanced water treatment that can efferently treat flowback and produced water (FPW). In this study, we developed a robust two-stage process that combines flocculation, and iron-carbon micro-electrolysis plus sodium persulfate (ICEPS) advanced oxidation to treat field-based FPW from the Sulige tight gas field, China. Influencing factors and optimal conditions of the flocculation-ICEPS process were investigated. The flocculation-ICEPS system at optimal conditions sufficiently removed the total organic contents (95.71%), suspended solids (92.4%), and chroma (97.5%), but the reaction stoichiometric efficiency (RSE) value was generally less than 5%. The particles and chroma were effectively removed by flocculation, and the organic contents was mainly removed by the ICEPS system. Fourier-transform infrared spectroscopy (FTIR) analysis was performed to track the changes in FPW chemical compositions through the oxidation of the ICEPS process. Multiple analyses demonstrated that PS was involved in the activation of Fe oxides and hydroxides accreted on the surface of the ICE system for FPW treatment, which led to increasing organics removal rate of the ICEPS system compared to the conventional ICE system. Our study suggests that the flocculation-ICEPS system is a promising FPW treatment process, which provides technical and mechanistic foundations for further field application.

Per- and polyfluoroalkyl substances in the atmosphere of waste management infrastructures: Uncovering secondary fluorotelomer alcohols, particle size distribution, and human inhalation exposure.

Per- and polyfluoroalkyl substances (PFAS) have been applied in numerous industrial and consumer products, the majority of which flow into waste management infrastructures (WMIs) at the end of their life cycles, but little is known about atmospheric releases of PFAS from these facilities. In this study, we addressed this key issue by investigating 49 PFAS, including 23 ionic and 26 neutral and precursor PFAS, in the potential sources (n = 4; within or adjacent to WMIs) and reference sites (n = 2; coastal and natural reserve sites) in urban and rural areas of Hong Kong, China. Duplicate samples of air and size-segregated particulate matter were collected for 48 h continuously using a 11-stage Micro-Orifice Uniform Deposit Impactor (MOUDI). In general, fluorotelomer alcohols (FTOHs) and perfluoroalkane sulfonamides were the predominant PFAS classes found across sampling sites. We also demonstrated the release of several less frequently observed semivolatile intermediate products (e.g., secondary FTOHs) during waste treatment. Except for perfluorooctane sulfonate, the size-segregated distributions of particulate PFAS exhibited heterogeneity across sampling sites, particularly in the WMIs, implying combined effects of sorption affinity and emission sources. A preliminary daily air emission estimation revealed that landfill was a relatively important source of PFAS relative to the wastewater treatment plant. A simplified International Commission on Radiological Protection model was used to estimate lung depositional fluxes, and the results showed that inhaled particulate PFAS were mainly deposited in the head airway while fine and ultrafine particles carried PFAS deeper into the lung alveoli. The cumulative daily inhalation dose of gaseous and particulate PFAS ranged from 81.9 to 265 pg/kg/d. In-depth research is required to understand the health effect of airborne PFAS on workers at WMIs.

Toxic effects of four cardiovascular drugs on the development and epigenetics of zebrafish (Danio rerio).

Due to the prevalence of cardiovascular diseases, therapeutic drugs such as atenolol (ATE), metoprolol (MET), atorvastatin (ATO), and bezafibrate (BZB) have been widely used and thus frequently detected in surface water at ng·L-1-µg·L-1 level. In this study, the developmental toxicity of these drugs (0.5 µg·L-1-500 µg·L-1) to zebrafish, an aquatic model organism, was investigated; and the epigenetic toxicity of BZB was also explored. For all four drugs, the results showed that the drugs exposure could cause sublethal toxic effects on zebrafish larvae, such as decreases in hatching rate, body length, and heart rate. ATO also induced the swelling of the eyes of larvae by 5 %-15 %. Yolk sac edema, pericardial edema, bent spine, and tail malformation were observed in larvae exposed to the drugs, and yolk sac edema was the most common malformation. In addition, the spontaneous movement and free-swimming activity could be inhibited by the drugs. Combined with RNA-seq results, the adverse development of larvae in exposure groups may be caused by the disruption of lipid and carbohydrate metabolism, and the development and function of eye and nervous system. After a 30-day uptake period, the accumulation of BZB and the decrease of global DNA methylation level were observed in the liver, kidneys, gut, gills, and brain of adult zebrafish (4-month-old) exposed to 0.5 µg·L-1 to 500 µg·L-1 BZB. The liver was the main organ for BZB accumulation and the occurrence of DNA hypomethylation. In the liver, overexpression (1.5-7.6 times) of genes related to lipid metabolism (PPARα), DNA methylation (Dnmt1), and apoptosis (p53) was also observed. The results of the current study suggest that long-term exposure to low-concentrations of cardiovascular drugs may pose significant threats to aquatic ecosystems.

Perfluorooctane sulfonate (PFOS) enhanced polystyrene particles uptake by human colon adenocarcinoma Caco-2 cells.

As microplastics and nanoplastics (MNPs) are widely distributed in the environment and can be transferred to human body through food chain, their potential impact on human health is of great concern. Perfluorooctane sulfonate (PFOS) is persistent, bioaccumulative and can be adsorbed by MNPs. However, there are few studies on the combined human health effects of MNPs with PFOS. In this study, the effects of polystyrene (PS) particles and PFOS on human colon adenocarcinoma cell Caco-2 were investigated in vitro to explore the combined toxicity from cellular level, and the toxic mechanism was further illustrated. Results showed that the presence of PFOS significantly increased the cell uptake of PS nanoparticles by >30 %, which is related to variations of the surface properties of PS particles, including the decrease of hydration kinetic diameter, the rise of surface potential and the adsorption of hydrophobic PFOS molecules. The toxic effect of PFOS was weakened in the presence of PS particles under low PFOS concentration (10 µg/mL), which is because the bioavailability of PFOS was reduced after adsorption. PS particles with small particle size (20 nm) showed higher cell uptake and ROS production, while PS particles with large particle size (1 µm) led to higher lipid oxidation degree and related membrane damage as well as mitochondrial stress. This study provides the first evaluation of combined toxicity of MNPs and PFOS on human intestinal cells, in order to support the risk assessment of combined pollution of MNPs and PFOS on human health.

Widespread occurrence of emerging E-waste contaminants - Liquid crystal monomers in sediments of the Pearl River Estuary, China.

Liquid crystal monomers (LCMs), commonly used in screens of electronic devices, have recently been identified as a group of emerging chemicals of concern associated with e-waste. They are potentially persistent, bioaccumulative, and toxic substances, and may pose a threat to the marine ecosystem. The Pearl River Estuary (PRE) receives organic contaminants discharged from the Pearl River Delta region, where primitive handling of e-waste is widespread. However, information on the pollution status of LCMs in the PRE is absent. Herein, a rapid and robust analytical method was established using ultrasonic extraction, solid phase extraction cleanup, and GC-Orbitrap-MS analysis. The spatial distribution of 39 target LCMs was investigated in 45 surface sediment samples from the PRE. Ten LCMs were detected, with ΣLCMs ranged from 0.9 to 31.1 ng/g dry weight. Our results demonstrated a widespread occurrence of LCMs in the sediments of the PRE, and a gradient of their contamination from inshore to offshore regions, indicating land-based origins. Our reported ΣLCMs concentrations were relatively higher compared to many other legacy and emerging pollutants found in the same investigated area. Preliminary risk assessment showed 3VbcH, Pe3bcH and tFMeO-3bcHP might be the top 3 risk contributors in the PRE. Further investigation on the ecological impact of LCMs on marine benthic ecosystems, as well as identification of their sources and control measures are warranted.

Evaluating phospholipid- and protein-water partitioning of two groups of chemicals of emerging concern: Diastereo- and enantioselectivity.

The partitioning between phospholipids/proteins and water can be used to predict the bioaccumulation potential of chemicals with better accuracy compared with n-octanol-water partition coefficient. However, such partitioning is poorly understood for chiral chemicals, many of which exhibit differential bioaccumulation and toxicity potential between enantiomers. In this study, the enantiospecific liposome-water and bovine serum albumin (BSA)-water partition coefficients (Klip/w and KBSA/w, determined at 25 ℃ and 37 ℃, respectively) were measured by equilibrium dialysis for α-, ß-, and γ-hexabromocyclododecane (HBCD) and three ß-blockers (propranolol, metoprolol, and sotalol). Raman and fluorescence analyses and molecular docking were conducted to provide additional insights into the partitioning process. Results showed α- and ß-HBCD displayed stronger enantioselective partitioning to liposomes with the (-)-form, while (-)-α-HBCD, R-(+)-propranolol, R-(+)-metoprolol, and E2-sotalol favored partitioning to BSA compared with their antipodes. Raman spectra revealed α- and γ-HBCD enhanced and reduced the organization of liposome acyl chains, respectively, and polar interactions enhanced the liposome partitioning of ß-blockers. Fluorescence spectra indicated the changed tryptophan microenvironment might influence the BSA steric effect toward HBCD, and electrostatic interactions dominated the formation of BSA-ß-blocker complexes. Molecular docking results supported the difference in the thermodynamic nature of interaction between the studied enantiomers and BSA.

Environmental photochemistry of organic UV filter butyl methoxydibenzoylmethane: Implications for photochemical fate in surface waters.

With the widespread use of sunscreen and other personal care products, organic ultraviolet filters (OUVFs) have become widely detected in the aquatic environment. Direct and indirect photolysis are important transformation pathways of OUVFs in aquatic environments, so their transformation products (TPs) are also chemicals of concern. Butyl methoxydibenzoylmethane (BMDBM) is one of the most commonly used OUVFs worldwide due to its ability to absorb ultraviolet light across a wide range of wavelengths, and it is ubiquitously detected in aquatic environments. In this study, we investigated the photodegradation of BMDBM through direct photolysis and hydroxyl radical (•OH) photooxidation. TPs were identified using ultrahigh performance liquid chromatography-high resolution mass spectrometry, and reaction mechanisms were proposed. Our results showed that the photodegradation rates for both enol and keto tautomer forms of BMDBM during direct photolysis and •OH photooxidation were similar. The formation of TPs resulted from α-cleavage and decarbonylation reactions involving the keto form of BMDBM. Comparisons of the kinetic data and TPs revealed that the direct photolysis mechanism was a significant sink for BMDBM even during •OH photooxidation. Evaluations of environmental properties based on the predicted physicochemical properties of BMDBM and TPs suggests that some of the TPs will have higher mobility than BMDBM. The quantitative structure-activity relationship (QSAR) approach was used to evaluate the ecotoxicity of BMDBM and the identified TPs. Most TPs were found to be less ecotoxic than BMDBM; however, TPs that had a diphenyl ring structure could be more ecotoxic than BMDBM. Overall, this study provides new insights into the photochemical behavior and ecotoxicity of BMDBM and its TPs, which are important for assessing the fate, persistence, accumulation, and adverse impacts of these compounds in aquatic environments.

Complex impacts of hydraulic fracturing return fluids on soil microbial community respiration, structure and functional potentials.

The consequences of soils exposed to hydraulic fracturing (HF) return fluid, often collectively termed flowback and produced water (FPW), are poorly understood, even though soils are a common receptor of FPW spills. Here, we investigate the impacts on soil microbiota exposed to FPW collected from the Montney Formation of western Canada. We measured soil respiration, microbial community structure and functional potentials under FPW exposure across a range of concentrations, exposure time and soil types (luvisol and chernozem). We find that soil type governs microbial community response upon FPW exposure. Within each soil, FPW exposure led to reduced biotic soil respiration, and shifted microbial community structure and functional potentials. We detect substantially higher species richness and more unique functional genes in FPW-exposed soils than in FPW-unexposed soils, with metagenome-assembled genomes (e.g. Marinobacter persicus) from luvisol soil exposed to concentrated FPW being most similar to genomes from HF/FPW sites. Our data demonstrate the complex impacts of microbial communities following FPW exposure and highlight the site-specific effects in evaluation of spills and agricultural reuse of FPW on the normal soil functions.

Supplementation with rac-GR24 Facilitates the Accumulation of Biomass and Astaxanthin in Two Successive Stages of Haematococcus pluvialis Cultivation.

The unicellular freshwater green alga Haematococcus pluvialis has attracted much research attention due to its biosynthetic ability for large amounts of astaxanthin, a blood-red ketocarotenoid that is used in cosmetics, nutraceuticals, and pharmaceuticals. Recently, numerous studies have investigated the functions of natural astaxanthin; however, the high cost of the production of astaxanthin from H. pluvialis cultures restricts its commercial viability. There is an urgent need to fulfill commercial demands by increasing astaxanthin accumulation from H. pluvialis cultures. In this study, we discovered that treatment of H. pluvialis cultures at the beginning of the macrozooid stage (day 0) with 1 µM rac-GR24, a synthetic analogue of strigolactones (a class of phytohormones), led to significant increases in biomass [up to a maximum dry cell weight (DCW) of 0.53 g/L] during the macrozooid stage and astaxanthin (from 0.63 to 5.32% of DCW) during the hematocyst stage. We elucidated that this enhancement of biomass accumulation during the macrozooid stage by rac-GR24 is due to its increasing CO2 utilization efficiency in photosynthesis and carbohydrate biosynthesis. We also found that rac-GR24 stimulated the overproduction of nicotinamide adenine dinucleotide phosphate (NADPH) and antioxidant enzymes in H. pluvialis cultures, which alleviated the oxidative damage caused by reactive oxygen species generated during the hematocyst stage due to the exhaustion of nitrogen supplies. Moreover, rac-GR24 treatment of H. pluvialis synergistically altered the activity of the pathways of fatty acid biosynthesis and astaxanthin esterification, which resulted in larger amounts of astaxanthin being generated by rac-GR24-treated cultures than by controls. In summary, we have developed a feasible and economic rac-GR24-assisted strategy that increases the amounts of biomass and astaxanthin generated by H. pluvialis cultures, and have provided novel insights into the mechanistic roles of rac-GR24 to achieve these effects.