Paper-Derived Millimeter-Thick Yarn Supercapacitors Enabling High Volumetric Energy Density.

Solid-state supercapacitors have shown extraordinary promise for flexible and wearable electronics. To date, they are still limited by relatively poor energy volumetric performances, which are largely determined by the pore structures and physicochemical properties of electrode materials. Moreover, the poor mechanical properties afforded because of the intrinsic shortcomings of electrode materials need to be resolved. Herein, we designed a flexible and solid-state yarn electrode with high porosity and high affinity toward electrolytes using poly(3,4-ethylenedioxythiophene) (PEDOT) and Korean heritage paper (KHP). To maximize the volumetric capacitive energy storage, PEDOT-loaded conductive KHP sheets (two-dimensional) were transformed into a biscrolled yarn (one-dimensional) via simple twisting. The volumetric capacitance of the biscrolled yarn supercapacitors with 1 mm cell diameter exhibited a volumetric specific capacitance of ∼6576 mF/cm3 at a scan rate of 25 mV/s, which is attributable to the high mass loading of PEDOT as a conductive support and increased packing density. Moreover, multiple optimized yarn supercapacitors can be connected to yield a total length of 1 m, demonstrating enormous potential as a portable and wearable power supply for operating smartwatches.

Effect of Atmospheric-Pressure Plasma Treatments on Fracture Toughness of Carbon Fibers-Reinforced Composites.

In this study, nano-scale fillers are added to epoxy matrix-based carbon fibers-reinforced composites (CFRPs) to improve the mechanical properties of multi-scale composites. Single-walled carbon nanotubes (SWCNTs) used as nano-scale fillers are treated with atmospheric-pressure plasma to introduce oxygen functional groups on the fillers' surface to increase the surface free energy and polar component, which relates to the mechanical properties of multi-scale composites. In addition, the effect of dispersibility was analyzed through the fracture surfaces of multi-scale composites containing atmospheric-pressure plasma-treated SWCNTs (P-SWCNTs) under high load conditions. The fillers content has an optimum weight percent load at 0.5 wt.% and the fracture toughness (KIC) method is used to demonstrate an improvement in mechanical properties. Here, KIC was calculated by three equations based on different models and we analyzed the correlation between mechanical properties and surface treatment. Compared to the composites of untreated SWCNTs, the KIC value is improved by 23.7%, suggesting improved mechanical properties by introducing selective functional groups through surface control technology to improve interfacial interactions within multi-scale composites.

Effect of nickel ion doping in MnO2/reduced graphene oxide nanocomposites for lithium adsorption and recovery from aqueous media.

Novel and effective reduced graphene oxide-nickel (Ni) doped manganese oxide (RGO/Ni-MnO2) adsorbents were fabricated via a hydrothermal approach. The reduction of graphite to graphene oxide (GO), formation of α-MnO2, and decoration of Ni-MnO2 onto the surface of reduced graphene oxide (RGO) were independently carried out by a hydrothermal technique. The physical and morphological properties of the as-synthesized adsorbents were analyzed. Batch adsorption experiments were performed to identify the lithium uptake capacities of adsorbents. The optimized parameters for Li+ adsorption investigated were pH = 12, dose loading = 0.1 g, Li+ initial concentration = 50 mg L-1, in 10 h at 25 °C. It is noticeable that the highest adsorption of Li+ at optimized parameters are in the following order: RGO/Ni3-MnO2 (63 mg g-1) > RGO/Ni2-MnO2 (56 mg g-1) > RGO/Ni1-MnO2 (52 mg g-1). A Kinetic study revealed that the experimental data were best designated pseudo-second order for each adsorbent. Li+ desorption experiments were performed using HCl as an extracting agent. Furthermore, all adsorbents exhibit efficient regeneration ability and to some extent satisfying selectivity for Li+ recovery. Briefly, it can be concluded that among the fabricated adsorbents, the RGO/Ni3-MnO2 exhibited the greatest potential for Li+ uptake from aqueous solutions as compared to others.

Carbon-Filled Organic Phase-Change Materials for Thermal Energy Storage: A Review.

Phase-change materials (PCMs) are essential modern materials for storing thermal energy in the form of sensible and latent heat, which play important roles in the efficient use of waste heat and solar energy. In the development of PCM technology, many types of materials have been studied, including inorganic salt and salt hydrates and organic matter such as paraffin and fatty acids. Considerable research has focused on the relationship between the material structure and energy storage properties to understand the heat storage/emission mechanism involved in controlling the energy storage performance of materials. In this study, we review the application of various carbon-filled organic PCMs in the field of heat storage and describe the current state of this research.

Recent Advances in Organic Thermoelectric Materials: Principle Mechanisms and Emerging Carbon-Based Green Energy Materials.

Thermoelectric devices have recently attracted considerable interest owing to their unique ability of converting heat to electrical energy in an environmentally efficient manner. These devices are promising as alternative power generators for harvesting electrical energy compared to conventional batteries. Inorganic crystalline semiconductors have dominated the thermoelectric material fields; however, their application has been restricted by their intrinsic high toxicity, fragility, and high cost. In contrast, organic thermoelectric materials with low cost, low thermal conductivity, easy processing, and good flexibility are more suitable for fabricating thermoelectric devices. In this review, we briefly introduce the parameters affecting the thermoelectric performance and summarize the most recently developed carbon-material-based organic thermoelectric composites along with their preparation technologies, thermoelectric performance, and future applications. In addition, the p- and n-type carbon nanotube conversion and existing challenges are discussed. This review can help researchers in elucidating the recent studies on carbon-based organic thermoelectric materials, thus inspiring them to develop more efficient thermoelectric devices.

Functionalized Carbon Materials for Electronic Devices: A Review.

Carbon-based materials, including graphene, single walled carbon nanotubes (SWCNTs), and multi walled carbon nanotubes (MWCNTs), are very promising materials for developing future-generation electronic devices. Their efficient physical, chemical, and electrical properties, such as high conductivity, efficient thermal and electrochemical stability, and high specific surface area, enable them to fulfill the requirements of modern electronic industries. In this review article, we discuss the synthetic methods of different functionalized carbon materials based on graphene oxide (GO), SWCNTs, MWCNTs, carbon fibers (CFs), and activated carbon (AC). Furthermore, we highlight the recent developments and applications of functionalized carbon materials in energy storage devices (supercapacitors), inkjet printing appliances, self-powered automatic sensing devices (biosensors, gas sensors, pressure sensors), and stretchable/flexible wearable electronic devices.

Facile Synthesis of MgO-Modified Carbon Adsorbents with Microwave- Assisted Methods: Effect of MgO Particles and Porosities on CO2 Capture.

In this study, magnesium oxide (MgO)-modified carbon adsorbents were fabricated using a nitrogen-enriched carbon precursor by microwave-assisted irradiation for CO2 capture. The X-ray diffraction (XRD) patterns showed the characteristic diffraction peaks of MgO at 43° and 62.5°, and no impurities were apparent. By changing the microwave reaction time, the spherical structure of the parent material was transformed to a hybrid structure with MgO crystalline particles in a carbon matrix. The morphology evolution and properties of the prepared materials were also investigated using transmission electron microscopy and N2 adsorption, respectively. On optimising the conditions, the prepared sample attained a high CO2 uptake of 1.22 mmol/g (5.3 wt.%) under flue gas conditions (15% CO2 in N2). It was found that MgO affected the CO2 capture behaviour by enhancing the fundamental characteristics of the carbon surfaces.