Direct frequency comb spectroscopy of HCN to evaluate line lists.

We report direct frequency comb spectroscopy of the 2ν1 band of H13CN in the short-wave infrared (λ = 1.56 µm) towards experimental validation of molecular line lists that support observatories like JWST. The laboratory measurements aim to test spectral reference data generated from an experimentally accurate potential energy surface (PES) and an ab initio dipole moment surface (DMS) calculated from quantum chemistry theory. Benchmarking theory with experiment will improve confidence in new astrophysics and astrochemistry inferred from spectroscopic observations of HCN and HNC. Here we describe our instrumentation and initial results using a cross-dispersed spectrometer with a virtually imaged phased array (VIPA).

Effect of Non-Markovian Collisions on Measured Integrated Line Shapes of CO.

Using cavity ring-down spectroscopy to probe R-branch transitions of CO in N_{2}, we show that the spectral core of the line shapes associated with the first few rotational quantum numbers, J, can be accurately modeled using a sophisticated line profile, provided that a pressure-dependent line area is introduced. This correction vanishes as J increases and is always negligible in CO-He mixtures. The results are supported by molecular dynamics simulations attributing the effect to non-Markovian behavior of collisions at short times. This work has large implications because corrections must be considered for accurate determinations of integrated line intensities, and for spectroscopic databases and radiative transfer codes used for climate predictions and remote sensing.

Primary Measurement of Gaseous Elemental Mercury Concentration with a Dynamic Range of Six Decades.

We present a primary method for absolute reference material-free measurement of gaseous elemental mercury mass concentration based on laser absorption spectroscopy at wavelengths near 254 nm and anchored to the international system of units. A 76 m-long multipass cell provides a detection limit of 1 ng m-3 for an averaging time of 8 min. A dual-cell arrangement, comprising a single-pass and a multipass cell, provides a dynamic range of six decades and spans from ambient to emission levels of gaseous elemental mercury (1 ng m-3 to 1000 µg m-3). The relative standard uncertainty of the measurement is 0.5% in the 0.25 to 1000 µg m-3 range.

Subpromille Measurements and Calculations of CO (3-0) Overtone Line Intensities.

Intensities of lines in the near-infrared second overtone band (3-0) of ^{12}C^{16}O are measured and calculated to an unprecedented degree of precision and accuracy. Agreement between theory and experiment to better than 1‰ is demonstrated by results from two laboratories involving two independent absorption- and dispersion-based cavity-enhanced techniques. Similarly, independent Fourier transform spectroscopy measurements of stronger lines in this band yield mutual agreement and consistency with theory at the 1‰ level. This set of highly accurate intensities can provide an intrinsic reference for reducing biases in future measurements of spectroscopic peak areas.

Dual-comb cavity ring-down spectroscopy.

Cavity ring-down spectroscopy is a ubiquitous optical method used to study light-matter interactions with high resolution, sensitivity and accuracy. However, it has never been performed with the multiplexing advantages of direct frequency comb spectroscopy without significantly compromising spectral resolution. We present dual-comb cavity ring-down spectroscopy (DC-CRDS) based on the parallel heterodyne detection of ring-down signals with a local oscillator comb to yield absorption and dispersion spectra. These spectra are obtained from widths and positions of cavity modes. We present two approaches which leverage the dynamic cavity response to coherently or randomly driven changes in the amplitude or frequency of the probe field. Both techniques yield accurate spectra of methane-an important greenhouse gas and breath biomarker. When combined with broadband frequency combs, the high sensitivity, spectral resolution and accuracy of our DC-CRDS technique shows promise for applications like studies of the structure and dynamics of large molecules, multispecies trace gas detection and isotopic composition.

Assessment of the precision, bias and numerical correlation of fitted parameters obtained by multi-spectrum fits of the Hartmann-Tran line profile to simulated absorption spectra.

Although the Voigt profile has long been used to analyze absorption spectra, the quest for increased precision, accuracy and generality drives the application of advanced models of atomic and molecular line shapes. To this end, the Hartmann-Tran profile is now recommended as a standard for high-resolution spectroscopy because it parameterizes relevant higher-order physical effects, is computationally efficient, and reduces to other widely used profiles as limiting cases. This work explores the uncertainty with which line shape parameters can be obtained from constrained multi-spectrum fits of spectra simulated with this standard profile, varying uncertainty levels in the spectrum detuning and absorption axes, and spanning a range of sampling density, pressure, and line shape parameter values. The analysis focuses on how noise-limited measurement precision of frequency detuning and absorption drive statistical uncertainties in fitted parameters and numerical correlations between these quantities. Also, we quantify the degree of equivalence between the full Hartmann-Tran profile and those derived from it in terms of fitted peak areas and line shape parameters. Finally, we introduce a new open-source software package named Multi-spectrum Analysis Tool for Spectroscopy (MATS), which allows users to fit the HTP and its derived profiles to experimental or simulated absorption spectra to explore the limits of the HTP under actual experimental or user-defined conditions.

Frequency stabilization of a quantum cascade laser by weak resonant feedback from a Fabry-Perot cavity.

Frequency-stabilized mid-infrared lasers are valuable tools for precision molecular spectroscopy. However, their implementation remains limited by complicated stabilization schemes. Here we achieve optical self-locking of a quantum cascade laser to the resonant leak-out field of a highly mode-matched two-mirror cavity. The result is a simple approach to achieving stable frequencies from high-powered mid-infrared lasers. For short time scales (<0.1ms), we report a linewidth reduction factor of 3×10-6 to a linewidth of 12 Hz. Furthermore, we demonstrate two-photon cavity-enhanced absorption spectroscopy of an N2O overtone transition near a wavelength of 4.53 µm.

Comparison of Primary Laser Spectroscopy and Mass Spectrometry Methods for Measuring Mass Concentration of Gaseous Elemental Mercury.

We present a direct comparison between two independent methods for the measurement of gaseous elemental mercury (GEM) mass concentration: isotope dilution cold-vapor inductively coupled plasma mass spectrometry (ID-CV-ICP-MS) and laser absorption spectroscopy (LAS). The former technique combined with passive sorbent tube sampling is currently the primary method at NIST for mercury gas standards traceability to the International System of Units (SI). This traceability is achieved via measurements on a mercury-containing reference material. The latter technique has been recently developed at NIST and involves real-time measurements of light attenuation caused by GEM, with SI traceability based in part on the known spontaneous emission lifetime of the probed 6 1S0-6 3P1 intercombination transition of elemental mercury (Hg0). Using a steady-flow Hg0-in-air generator to produce samples measured by both methods, we use LAS to measure the sample gas and in parallel we collect the Hg0 on sorbent tubes to be subsequently analyzed using ID-CV-ICP-MS. Over the examined mass concentration range (41 µg/m3 to 287 µg/m3 Hg0 in air), the relative disagreement between the two approaches ranged from (1.0 to 1.8)%. The relative combined standard uncertainty on average is 0.4% and 0.9%, for the LAS and MS methods, respectively. Our comparison studies help validate the accuracy of the ID-CV-ICP-MS primary method as well as establish the LAS technique as an attractive alternative primary method for SI-traceable measurements of GEM.

Near-infrared cavity ring-down spectroscopy measurements of nitrous oxide in the (4200)←(0000) and (5000)←(0000) bands.

Using frequency-agile rapid scanning cavity ring-down spectroscopy, we measured line intensities and line shape parameters of 14N2 16O in air in the (4200)←(0000) and (5000)←(0000) bands near 1.6 µm. The absorption spectra were modeled with multi-spectrum fits of Voigt and speed-dependent Voigt profiles. The measured line intensities and air-broadening parameters exhibit deviations of several percent relative to values provided in HITRAN 2016. Our measured intensities for these two bands have relative combined standard uncertainties of ∼1% which is approximately five times smaller than literature values. Comparison of the present air-broadening and speed-dependent broadening parameters to experimental literature values for other rotation-vibration bands of N2O indicates significant differences in magnitude and J-dependence. For applications requiring high spectral fidelity, these results suggest that the assumption of band-independent line shape parameters is not appropriate.

Absolute 13C/12C Isotope Amount Ratio for Vienna Pee Dee Belemnite from Infrared Absorption Spectroscopy.

Measurements of isotope ratios are predominantly made with reference to standard specimens that have been characterized in the past. In the 1950s, the carbon isotope ratio was referenced to a belemnite sample collected by Heinz Lowenstam and Harold Urey1 in South Carolina's Pee Dee region. Due to the exhaustion of the sample since then, reference materials that are traceable to the original artefact are used to define the Vienna Pee Dee Belemnite (VPDB) scale for stable carbon isotope analysis2. However, these reference materials have also become exhausted or proven to exhibit unstable composition over time3, mirroring issues with the international prototype of the kilogram that led to a revised International System of Units4. A campaign to elucidate the stable carbon isotope ratio of VPDB is underway5, but independent measurement techniques are required to support it. Here we report an accurate value for the stable carbon isotope ratio inferred from infrared absorption spectroscopy, fulfilling the promise of this fundamentally accurate approach6. Our results agree with a value recently derived from mass spectrometry5, and therefore advance the prospects of SI-traceable isotope analysis. Further, our calibration-free method could improve mass balance calculations and enhance isotopic tracer studies in CO2 source apportionment.

Improvement of the spectroscopic parameters of the air- and self-broadened N2O and CO lines for the HITRAN2020 database applications.

This paper outlines the major updates of the line-shape parameters that were performed for the nitrous oxide (N2O) and carbon monoxide (CO) molecules listed in the HITRAN2020 database. We reviewed the collected measurements for the air- and self-broadened N2O and CO spectra to determine proper values for the spectroscopic parameters. Careful comparisons of broadening parameters using the Voigt and speed-dependent Voigt line-shape profiles were performed among various published results for both N2O and CO. Selected data allowed for developing semi-empirical models, which were used to extrapolate/interpolate existing data to update broadening parameters of all the lines of these molecules in the HITRAN database. In addition to the line broadening parameters (and their temperature dependences), the pressure shift values were revised for N2O and CO broadened by air and self for all the bands. The air and self speed-dependence of the broadening parameter for these two molecules were added for every transition as well. Furthermore, we determined the first-order line-mixing parameters using the Exponential Power Gap (EPG) scaling law. These new parameters are now available at HITRAN online.

Air-broadening in near-infrared carbon dioxide line shapes: Quantifying contributions from O2, N2, and Ar.

We measured air broadening in the (30012) ← (00001) carbon dioxide (CO2) band up to J″=50 using frequency-agile rapid scanning cavity ring-down spectroscopy. By using synthetic air samples with varying levels of nitrogen, oxygen, and argon, multi-spectrum fitting allowed for the collisional broadening terms of each major air component to be simultaneously determined in addition to advanced line shape parameters at atmospherically relevant CO2 mixing ratios. These values were compared to broadener-specific line shape parameters from the literature. Fits to measured spectra were also constrained with results from requantized classical molecular dynamic simulations. We show that this approach enables differentiation between narrowing mechanisms in advanced line shape parameters retrieved from experimental spectra of limited signal-to-noise ratio.

Cavity ring-down spectroscopy of CO2 near λ = 2.06 µm: Accurate transition intensities for the Orbiting Carbon Observatory-2 (OCO-2) "strong band".

The λ = 2.06 µm absorption band of CO2 is widely used for the remote sensing of atmospheric carbon dioxide, making it relevant to many important top-down measurements of carbon flux. The forward models used in the retrieval algorithms employed in these measurements require increasingly accurate line intensity and line shape data from which absorption cross-sections can be computed. To overcome accuracy limitations of existing line lists, we used frequency-stabilized cavity ring-down spectroscopy to measure 39 transitions in the 12C16O2 absorption band. The line intensities were measured with an estimated relative combined standard uncertainty of u r = 0.08 %. We predicted the J-dependence of the measured intensities using two theoretical models: a one-dimensional spectroscopic model with Herman-Wallis rotation-vibration corrections, and a line-by-line ab initio dipole moment surface model [Zak et al. JQSRT 2016;177:31-42]. For the second approach, we fit only a single factor to rescale the theoretical integrated band intensity to be consistent with the measured intensities. We find that the latter approach yields an equally adequate representation of the fitted J-dependent intensity data and provides the most physically general representation of the results. Our recommended value for the integrated band intensity equal to 7.183 × 10-21 cm molecule-1 ± 6 × 10-24 cm molecule-1 is based on the rescaled ab initio model and corresponds to a fitted scale factor of 1.0069 ± 0.0002. Comparisons of literature intensity values to our results reveal systematic deviations ranging from -1.16 % to +0.33 %.

Doppler-Free Two-Photon Cavity Ring-Down Spectroscopy of a Nitrous Oxide (N2O) Vibrational Overtone Transition.

We report Doppler-free two-photon absorption of N2O at λ = 4.53 µm, measured by cavity ring-down spectroscopy. High power was achieved by optical self-locking of a quantum cascade laser to a linear resonator of finesse F = 22730 , and accurate laser detuning over a 400 MHz range was measured relative to an optical frequency comb. At a sample pressure of p = 0.13 kPa, we report a large two-photon cross-section per molecule of σ 13 ( 2 ) = 8.0 × 10 - 41 cm4 s for the Q(18) rovibrational transition at a resonant frequency of ν 0 = 66179400.8 MHz.

Using a Speed-Dependent Voigt Line Shape to Retrieve O2 from Total Carbon Column Observing Network Solar Spectra to Improve Measurements of XCO2.

High-resolution, laboratory, absorption spectra of the a 1 Δ g ← X 3 ∑ g - oxygen (O2) band measured using cavity ring-down spectroscopy were fitted using the Voigt and speed-dependent Voigt line shapes. We found that the speed-dependent Voigt line shape was better able to model the measured absorption coefficients than the Voigt line shape. We used these line shape models to calculate absorption coefficients to retrieve atmospheric total columns abundances of O2 from ground-based spectra from four Fourier transform spectrometers that are apart of the Total Carbon Column Observing Network (TCCON) Lower O2 total columns were retrieved with the speed-dependent Voigt line shape, and the difference between the total columns retrieved using the Voigt and speed-dependent Voigt line shapes increased as a function of solar zenith angle. Previous work has shown that carbon dioxide (CO2) total columns are better retrieved using a speed-dependent Voigt line shape with line mixing. The column-averaged dry-air mole fraction of CO2 (XCO2) was calculated using the ratio between the columns of CO2 and O2 retrieved (from the same spectra) with both line shapes from measurements made over a one-year period at the four sites. The inclusion of speed dependence in the O2 retrievals significantly reduces the airmass dependence of XCO2 and the bias between the TCCON measurements and calibrated integrated aircraft profile measurements was reduced from 1% to 0.4%. These results suggest that speed dependence should be included in the forward model when fitting near-infrared CO2 and O2 spectra to improve the accuracy of XCO2 measurements.

Twenty-Five-Fold Reduction in Measurement Uncertainty for a Molecular Line Intensity.

To accurately attribute sources and sinks of molecules like CO_{2}, remote sensing missions require line intensities (S) with relative uncertainties u_{r}(S)<0.1%. However, discrepancies in S of ≈1% are common when comparing different experiments, thus limiting their potential impact. Here we report a cavity ring-down spectroscopy multi-instrument comparison which revealed that the hardware used to digitize analog ring-down signals caused variability in spectral integrals which yield S. Our refined approach improved measurement accuracy 25-fold, resulting in u_{r}(S)=0.06%.

Issues with analyzing noble gases using gas chromatography with thermal conductivity detection.

The noble gases, namely neon, argon, krypton and xenon, have many uses including in incandescent and gas discharge lighting, in plasma televisions, shielding gas in welding, in lasers for surgery and semiconductors, and in magnetic resonance imaging (MRI) of the lungs. When incorporating these noble gases in industries, especially the medical field, it is important to know accurately the composition of the noble gas mixture. Therefore, there is a need for accurate gas standards that can be used to determine the noble gas amount-of-substance fraction in the appropriate mixture application. A recent comparison of mixtures containing four noble gases in a helium balance showed mixed results among National Metrology Institutes. Significant differences, 0.7 to 3.8% relative, were seen in the analytical amount-of-substance assignments versus the gravimetric value of the noble gases in the comparison mixture when using "binary standards", i.e. neon in helium, argon in helium and krypton in helium, as applied by the National Institute of Standards and Technology. Post-comparison studies showed that when all four noble gases were included in the standards, the agreement between analytical and gravimetric values was within 0.05% relative. Further research revealed that different carrier gases (hydrogen, helium and nitrogen) resulted in varying differences between the analytical and gravimetric values assignments. This paper will discuss the findings of these analytical comparisons. Graphical abstract ᅟ.

High-accuracy 12C16O2 line intensities in the 2 µm wavelength region measured by frequency-stabilized cavity ring-down spectroscopy.

Reported here are highly accurate, experimentally measured ro-vibrational transition intensities for the R-branch of the (20012) - (00001) 12C16O2 band near λ = 2 µm. Measurements were performed by a frequency-stabilized cavity ring-down spectroscopy (FS-CRDS) instrument designed to achieve precision molecular spectroscopy in this important region of the infrared. Through careful control and traceable characterization of CO2 sample conditions, and through high-fidelity measurements spanning several months in time, we achieve relative standard uncertainties for the reported transition intensities between 0.15 % and 0.46 %. Such high accuracy spectroscopy is shown to provide a stringent test of calculated potential energy and ab initio dipole moment surfaces, and therefore transition intensities calculated from first principles.

Development of a High-Resolution Laser Absorption Spectroscopy Method with Application to the Determination of Absolute Concentration of Gaseous Elemental Mercury in Air.

Isotope dilution-cold-vapor-inductively coupled plasma mass spectrometry (ID-CV-ICPMS) has become the primary standard for measurement of gaseous elemental mercury (GEM) mass concentration. However, quantitative mass spectrometry is challenging for several reasons including (1) the need for isotopic spiking with a standard reference material, (2) the requirement for bias-free passive sampling protocols, (3) the need for stable mass spectrometry interface design, and (4) the time and cost involved for gas sampling, sample processing, and instrument calibration. Here, we introduce a high-resolution laser absorption spectroscopy method that eliminates the need for sample-specific calibration standards or detailed analysis of sample treatment losses. This technique involves a tunable, single-frequency laser absorption spectrometer that measures isotopically resolved spectra of elemental mercury (Hg) spectra of 6 1S0 ← 6 3P1 intercombination transition near λ = 253.7 nm. Measured spectra are accurately modeled from first-principles using the Beer-Lambert law and Voigt line profiles combined with literature values for line positions, line shape parameters, and the spontaneous emission Einstein coefficient to obtain GEM mass concentration values. We present application of this method for the measurement of the equilibrium concentration of mercury vapor near room temperature. Three closed systems are considered: two-phase mixtures of liquid Hg and its vapor and binary two-phase mixtures of Hg-air and Hg-N2 near atmospheric pressure. Within the experimental relative standard uncertainty, 0.9-1.5% congruent values of the equilibrium Hg vapor concentration are obtained for the Hg-only, Hg-air, Hg-N2 systems, in confirmation with thermodynamic predictions. We also discuss detection limits and the potential of the present technique to serve as an absolute primary standard for measurements of gas-phase mercury concentration and isotopic composition.