Using dynamic biomaterials to study the temporal role of bioactive peptides during osteogenesis.

The extracellular matrix is a highly dynamic environment, and the precise temporal presentation of biochemical signals is critical for regulating cell behavior during development, healing, and disease progression. To mimic this behavior, we developed a modular DNA-based hydrogel platform to enable independent and reversible control over the immobilization of multiple biomolecules during in vitro cell culture. We combined reversible DNA handles with a norbornene-modified hyaluronic acid hydrogel to orthogonally add and remove multiple biomolecule-DNA conjugates at user-defined timepoints. We demonstrated that the persistent presentation of the cell adhesion peptide RGD was required to maintain cell spreading on hyaluronic acid hydrogels. Further, we discovered the delayed presentation of osteogenic growth peptide (OGP) increased alkaline phosphatase activity compared to other temporal variations. This finding is critically important when considering the design of OGP delivery approaches for bone repair. More broadly, this platform provides a unique approach to tease apart the temporal role of multiple biomolecules during development, regeneration, and disease progression.

Using dynamic biomaterials to study the temporal role of osteogenic growth peptide during osteogenesis.

The extracellular matrix is a highly dynamic environment, and the precise temporal presentation of biochemical signals is critical for regulating cell behavior during development, healing, and disease progression. To mimic this behavior, we developed a modular DNA-based hydrogel platform to enable independent and reversible control over the immobilization of multiple biomolecules during in vitro cell culture. We combined reversible DNA handles with a norbornene-modified hyaluronic acid hydrogel to orthogonally add and remove multiple biomolecule-DNA conjugates at user-defined timepoints. We demonstrated that the persistent presentation of the cell adhesion peptide RGD was required to maintain cell spreading on hyaluronic acid hydrogels. Further, we discovered the delayed presentation of osteogenic growth peptide (OGP) increased alkaline phosphatase activity compared to other temporal variations. This finding is critically important when considering the design of OGP delivery approaches for bone repair. More broadly, this platform provides a unique approach to tease apart the temporal role of multiple biomolecules during development, regeneration, and disease progression.

Magnetic fields enable precise spatial control over electrospun fiber alignment for fabricating complex gradient materials.

Musculoskeletal interfacial tissues consist of complex gradients in structure, cell phenotype, and biochemical signaling that are important for function. Designing tissue engineering strategies to mimic these types of gradients is an ongoing challenge. In particular, new fabrication techniques that enable precise spatial control over fiber alignment are needed to better mimic the structural gradients present in interfacial tissues, such as the tendon-bone interface. Here, we report a modular approach to spatially controlling fiber alignment using magnetically-assisted electrospinning. Electrospun fibers were highly aligned in the presence of a magnetic field and smoothly transitioned to randomly aligned fibers away from the magnetic field. Importantly, magnetically-assisted electrospinning allows for spatial control over fiber alignment at sub-millimeter resolution along the length of the fibrous scaffold similar to the native structural gradient present in many interfacial tissues. The versatility of this approach was further demonstrated using multiple electrospinning polymers and different magnet configurations to fabricate complex fiber alignment gradients. As expected, cells seeded onto gradient fibrous scaffolds were elongated and aligned on the aligned fibers and did not show a preferential alignment on the randomly aligned fibers. Overall, this fabrication approach represents an important step forward in creating gradient fibrous materials, where such materials are promising as tissue-engineered scaffolds for regenerating functional musculoskeletal interfacial tissues.

Trilayered Hydrogel Scaffold for Vocal Fold Tissue Engineering.

The lamina propria within the vocal fold (VF) is a complex multilayered tissue that increases in stiffness from the superficial to deep layer, where this characteristic is crucial for VF sound production. Tissue-engineered scaffolds designed for VF repair must mimic the biophysical nature of the native vocal fold and promote cell viability, cell spreading, and vibration with air flow. In this study, we present a unique trilayered, partially degradable hydrogel scaffold that mimics the multilayered structure of the VF lamina propria. Using thiol-norbornene photochemistry, trilayered hydrogel scaffolds were fabricated via layer-by-layer stacking with increasing polymer concentration from the top to middle to deep layer. Mechanical analysis confirmed that hydrogel modulus increased with increasing polymer concentration. Partially degradable hydrogels promoted high cell viability and cell spreading in three dimensions as assessed via live/dead and cytoskeleton staining, respectively. Importantly, partially degradable hydrogels maintained some degree of the three dimensional polymer network following protease exposure, while still enabling encapsulated cells to remodel their local environment via protease secretion. Finally, the trilayered hydrogel scaffold successfully vibrated and produced sound in proof-of-concept air flow studies. This work represents a critical first step toward the design of a multilayered, hydrogel scaffold for vocal fold tissue engineering.

Comparative Analysis of Fiber Alignment Methods in Electrospinning.

Fabrication of anisotropic materials is highly desirable in designing biomaterials and tissue engineered constructs. Electrospinning has been broadly adopted due to its versatility in producing non-woven fibrous meshes with tunable fiber diameters (from 10 nanometers to 10 microns), microarchitectures, and construct geometries. A myriad of approaches have been utilized to control fiber alignment of electrospun materials to achieve complex microarchitectures, improve mechanical properties, and provide topographical cellular cues. This review provides a comparative analysis of the techniques developed to generate fiber alignment in electrospun materials. A description of the underlying mechanisms that drive fiber alignment, setup variations for each technique, and the resulting impact on the aligned microarchitecture is provided. A critical analysis of the advantages and limitations of each approach is provided to guide researchers in method selection. Finally, future perspectives of advanced electrospinning methodologies are discussed in terms of developing a scalable method with precise control of microarchitecture.

Hyaluronic Acid Biomaterials for Central Nervous System Regenerative Medicine.

Hyaluronic acid (HA) is a primary component of the brain extracellular matrix and functions through cellular receptors to regulate cell behavior within the central nervous system (CNS). These behaviors, such as migration, proliferation, differentiation, and inflammation contribute to maintenance and homeostasis of the CNS. However, such equilibrium is disrupted following injury or disease leading to significantly altered extracellular matrix milieu and cell functions. This imbalance thereby inhibits inherent homeostatic processes that support critical tissue health and functionality in the CNS. To mitigate the damage sustained by injury/disease, HA-based tissue engineering constructs have been investigated for CNS regenerative medicine applications. HA's effectiveness in tissue healing and regeneration is primarily attributed to its impact on cell signaling and the ease of customizing chemical and mechanical properties. This review focuses on recent findings to highlight the applications of HA-based materials in CNS regenerative medicine.

Reversible control of biomaterial properties for dynamically tuning cell behavior.

In the past decade, significant advances in chemistry and manufacturing have enabled the development of increasingly complex and controllable biomaterials. A key innovation is the design of dynamic biomaterials that allow for user-specified, reversible, temporal control over material properties. In this review, we provide an overview of recent advancements in reversible biomaterials, including control of stiffness, chemistry, ligand presentation, and topography. These systems have wide-ranging applications within biomedical engineering, including in vitro disease models and tissue-engineered scaffolds to guide multistep biological processes.

Stepping into the Next Dimension of Biomaterial Design.

Recapitulating the dynamic spatiotemporal behavior of the extracellular matrix using biomaterials is an ongoing challenge. A recent breakthrough by Shadish et al. demonstrates the use of sortase-mediated transpeptidation to site-specifically modify proteins with a range of chemical motifs. Modified proteins were immobilized within biomaterials with high spatiotemporal control and resulted in localized bioactivity.

Programmed biomolecule delivery to enable and direct cell migration for connective tissue repair.

Dense connective tissue injuries have limited repair, due to the paucity of cells at the wound site. We hypothesize that decreasing the density of the local extracellular matrix (ECM) in conjunction with releasing chemoattractive signals increases cellularity and tissue formation after injury. Using the knee meniscus as a model system, we query interstitial cell migration in the context of migratory barriers using a novel tissue Boyden chamber and show that a gradient of platelet-derived growth factor-AB (PDGF-AB) expedites migration through native tissue. To implement these signals in situ, we develop nanofibrous scaffolds with distinct fiber fractions that sequentially release active collagenase (to increase ECM porosity) and PDGF-AB (to attract endogenous cells) in a localized and coordinated manner. We show that, when placed into a meniscal defect, the controlled release of collagenase and PDGF-AB increases cellularity at the interface and within the scaffold, as well as integration with the surrounding tissue.

Synergistic Effects of SDF-1α and BMP-2 Delivery from Proteolytically Degradable Hyaluronic Acid Hydrogels for Bone Repair.

In order to achieve bone repair, bone morphogenetic protein-2 (BMP-2) is typically delivered in non-physiological doses and can result in significant adverse side effects. To reduce the amount of BMP-2 necessary for bone formation, we delivered a known chemokine (stromal cell derived factor-1α, SDF-1α) in combination with BMP-2 using proteolytically degradable hydrogels. A critical-sized calvarial defect was used to determine the effect of biomolecule delivery on bone formation in vivo. The treatment group with combined SDF-1α and BMP-2 hydrogel delivery showed significantly higher bone formation when compared to hydrogels loaded with the same BMP-2 or SDF-1α concentrations alone, suggesting the combined delivery of both biomolecules synergistically improves osteogenesis.

Modulating hydrogel crosslink density and degradation to control bone morphogenetic protein delivery and in vivo bone formation.

Bone morphogenetic proteins (BMPs) show promise in therapies for improving bone formation after injury; however, the high supraphysiological concentrations required for desired osteoinductive effects, off-target concerns, costs, and patient variability have limited the use of BMP-based therapeutics. To better understand the role of biomaterial design in BMP delivery, a matrix metalloprotease (MMP)-sensitive hyaluronic acid (HA)-based hydrogel was used for BMP-2 delivery to evaluate the influence of hydrogel degradation rate on bone repair in vivo. Specifically, maleimide-modified HA (MaHA) macromers were crosslinked with difunctional MMP-sensitive peptides to permit protease-mediated hydrogel degradation and growth factor release. The compressive, rheological, and degradation properties of MaHA hydrogels were characterized as a function of crosslink density, which was varied through either MaHA concentration (1-5wt.%) or maleimide functionalization (10-40%f). Generally, the compressive moduli increased, the time to gelation decreased, and the degradation rate decreased with increasing crosslink density. Furthermore, BMP-2 release increased with either a decrease in the initial crosslink density or an increase in collagenase concentration (non-specific MMP degradation). Lastly, two hydrogel formulations with distinct BMP-2 release profiles were evaluated in a critical-sized calvarial defect model in rats. After six weeks, minimal evidence of bone repair was observed within defects left empty or filled with hydrogels alone. For hydrogels that contained BMP-2, similar volumes of new bone tissue were formed; however, the faster degrading hydrogel exhibited improved cellular invasion, bone volume to total volume ratio, and overall defect filling. These results illustrate the importance of coordinating hydrogel degradation with the rate of new tissue formation.

Interfacial optimization of fiber-reinforced hydrogel composites for soft fibrous tissue applications.

Meniscal tears are the most common orthopedic injuries to the human body, yet the current treatment of choice is a partial meniscectomy, which is known to lead to joint degeneration and osteoarthritis. As a result, there is a significant clinical need to develop materials capable of restoring function to the meniscus following an injury. Fiber-reinforced hydrogel composites are particularly suited for replicating the mechanical function of native fibrous tissues due to their ability to mimic the native anisotropic property distribution present. A critical issue with these materials, however, is the potential for the fiber-matrix interfacial properties to severely limit composite performance. In this work, the interfacial properties of an ultra-high-molecular-weight polyethylene (UHMWPE) fiber-reinforced poly(vinyl alcohol) (PVA) hydrogel are studied. A novel chemical grafting technique, confirmed using X-ray photoelectron spectroscopy, is used to improve UHMWPE-PVA interfacial adhesion. Interfacial shear strength is quantified using fiber pull-out tests. Results indicate significantly improved fiber-hydrogel interfacial adhesion after chemical grafting, where chemically grafted samples have an interfacial shear strength of 256.4±64.3kPa compared to 11.5±2.9kPa for untreated samples. Additionally, scanning electron microscopy of fiber surfaces after fiber pull-out reveal cohesive failure within the hydrogel matrix for treated fiber samples, indicating that the UHMWPE-PVA interface has been successfully optimized. Lastly, inter-fiber spacing is observed to have a significant effect on interfacial adhesion. Fibers spaced further apart have significantly higher interfacial shear strengths, which is critical to consider when optimizing composite design. The results in this study are applicable in developing similar chemical grafting techniques and optimizing fiber-matrix interfacial properties for other hydrogel-based composite systems.

Transdermal gelation of methacrylated macromers with near-infrared light and gold nanorods.

Injectable hydrogels provide locally controlled tissue bulking and a means to deliver drugs and cells to the body. The formation of hydrogels in vivo may involve the delivery of two solutions that spontaneously crosslink when mixed, with pH or temperature changes, or with light (e.g., visible or ultraviolet). With these approaches, control over the kinetics of gelation, introduction of the initiation trigger (e.g., limited penetration of ultraviolet light through tissues), or alteration of the material physical properties (e.g., mechanics) may be difficult to achieve. To overcome these limitations, we used the interaction of near-infrared (NIR) light with gold nanorods (AuNRs) to generate heat through the photothermal effect. NIR light penetrates tissues to a greater extent than other wavelengths and provides a means to indirectly initiate radical polymerization. Specifically, this heating coupled with a thermal initiator (VA-044) produced radicals that polymerized methacrylated hyaluronic acid (MeHA) and generated hydrogels. A range of VA-044 concentrations changed the gelation time, yielding a system stable at 37 ° C for 22 min that gels quickly (~3 min) when heated to 55 ° C. With a constant irradiation time (10 min) and laser power (0.3 W), different VA-044 and AuNR concentrations tuned the compressive modulus of the hydrogel. By changing the NIR irradiation time we attained a wide range of moduli at a set solution composition. In vivo mouse studies confirmed that NIR laser irradiation through tissue could gel an injected precursor solution transdermally.

Aging behavior of PVA hydrogels for soft tissue applications after in vitro swelling using osmotic pressure solutions.

The osmotic pressure of the medium used for in vitro swelling evaluation has been shown to have a significant effect on the swelling behavior of a material. In this study, the effect of osmotic pressure during swelling on poly(vinyl alcohol) hydrogel material properties was evaluated in vitro. Osmotic pressure solutions are necessary in order to mimic the swelling pressure observed in vivo for soft tissues present in load-bearing joints. Hydrogels were characterized after swelling by mechanical testing, X-ray diffraction and optical microscopy in the hydrated state. Results indicated that hydrogel mechanical properties remained tailorable with respect to initial processing parameters; however, significant aging occurred in osmotic solution. This was observed when evaluating the mechanical properties of the hydrogels, which, before swelling, ranged from 0.04 to 0.78 MPa but, after swelling in vitro using osmotic pressure solution, ranged from 0.32 to 0.93 MPa. Significant aging was also noted when evaluating crystallinity, with the relative crystallinity ranging between 0.4 and 5.0% before swelling and between 6.5 nd 8.0% after swelling. When compared to swelling in a non-osmotic pressure solution or in phosphate-buffered saline solution, the mechanical properties were more dependent upon the final swelling content. Furthermore, increases in crystallinity were not as significant after swelling. These results highlight the importance of choosing the appropriate swelling medium for in vitro characterization based on the desired application.

A novel method for the direct fabrication of growth factor-loaded microspheres within porous nondegradable hydrogels: controlled release for cartilage tissue engineering.

Because of similar mechanical properties to native cartilage, synthetic hydrogels based on poly(vinyl alcohol) (PVA) have been proposed for replacement of damaged articular cartilage, but they suffer from a complete lack of integration with surrounding tissue. In this study, insulin-like growth factor-1 (IGF-1), an important growth factor in cartilage regeneration, was encapsulated in degradable poly(lactic-co-glycolic acid) (PLGA) microparticles embedded in the PVA hydrogels in a single step based on a double emulsion. The release of IGF-1 from these hydrogels was sustained over 6 weeks in vitro. Poly(glycolic acid) (PGA) fiber scaffolds were wrapped around the hydrogels, seeded with chondrocytes, and implanted subcutaneously in athymic mice. The release of IGF-1 enhanced cartilage formation in the layers surrounding the hydrogels, in terms of the content of extracellular matrix components and mechanical properties, and increased integration between the cartilage layers and the hydrogels, according to gross observation of the cross-sections and histology. The compressive modulus of the cartilage-hydrogel constructs without IGF-1 was 0.07±0.02MPa, compared to 0.17-0.2MPa for hydrogels that contained IGF-1. The biochemical and mechanical markers of cartilage formation were not different between the low and high concentrations of IGF-1, despite an order of magnitude difference in concentration. This study shows that the sustained release of IGF-1 can enhance tissue formation and points to a possible strategy for effecting integration with surrounding tissue.

Design of semi-degradable hydrogels based on poly(vinyl alcohol) and poly(lactic-co-glycolic acid) for cartilage tissue engineering.

Articular cartilage damage is a persistent challenge in biomaterials and tissue engineering. Poly(vinyl alcohol) (PVA) hydrogels have shown promise as implants, but their lack of integration with surrounding cartilage prevents their utility. We sought to combine the advantages of PVA hydrogels with poly(lactic-co-glycolic acid) (PLGA) scaffolds, which have been successful in facilitating the integration of neocartilage with surrounding tissue. Through a novel double-emulsion technique, PLGA microparticles and a high level of porosity were simultaneously incorporated into PVA hydrogels. The porosity, average pore size and swelling properties of the hydrogels were controlled by varying initial processing parameters, such as the relative amounts of PLGA and solvent. Average pore sizes were in the ranged 50-100 µm. The PLGA microparticles degraded within the hydrogels over time in aqueous conditions, resulting in increases in porosity and pore size. After 4 weeks in cell culture, immature cartilage tissue filled many of the pores of the hydrogels that initially contained PLGA, and proteoglycan production was proportional to the amount of PLGA. In contrast, there was little cell attachment and no proteoglycan production in control hydrogels without PLGA. The compressive moduli of the hydrogels were similar to that of healthy cartilage and increased over time from 0.05-0.1 to 0.3-0.7 MPa. The generation of a hybrid cartilage-hydrogel construct using this technique may finally allow the integration of PVA hydrogels with surrounding cartilage.

Analysis of the in vitro swelling behavior of poly(vinyl alcohol) hydrogels in osmotic pressure solution for soft tissue replacement.

An osmotic solution was used to evaluate poly(vinyl alcohol) (PVA) hydrogels as potential non-degradable soft tissue replacements in vitro. Osmotic solutions are necessary in order to mimic the swelling pressure observed in vivo for soft tissues present in load-bearing joints. In vitro studies indicated that PVA hydrogels experience minimal changes in swelling with a polymer concentration of 20 wt.% PVA in phosphate-buffered saline solution (0 atm) and between 30 and 35 wt.% PVA in osmotic solution with a pressure of 0.95 atm. Swelling in osmotic pressure solutions caused decreases in the equilibrium hydrogel hydration. An investigation of hydrogel compressive modulus indicated that PVA hydrogels are within the range of articular cartilage, meniscal tissue, and the temporomandibular joint disk. Furthermore, it is possible to tailor PVA hydrogels through careful modification of the polymer concentration and freeze-thaw cycles during hydrogel preparation to match both a desired swelling ratio and a desired compressive modulus or porosity. The microstructure of the PVA hydrogels was also evaluated as a function of freeze-thaw cycles and polymer concentration to give an insight into the processes occurring during synthesis and swelling in osmotic solutions.

Mechanical evaluation of poly(vinyl alcohol)-based fibrous composites as biomaterials for meniscal tissue replacement.

In this study, poly(vinyl alcohol) (PVA) hydrogels were reinforced with ultrahigh molecular weight polyethylene (UHMWPE) and PP fibers and evaluated as potential nondegradable meniscal replacements. An investigation of hydrogel and composite mechanical properties indicates that fiber-reinforced PVA hydrogels could replicate the unique anisotropic modulus distribution present in the native meniscus; the most commonly damaged orthopedic tissue. More specifically, fibrous reinforcement successfully increased the tensile modulus of the biomaterial from 0.23±0.02MPa without any reinforcement to 258.1±40.1MPa at 29vol.% UHMWPE. Additionally, the molecular weight between cross-links, bound water and the microstructure of the PVA hydrogels were evaluated as a function of freeze-thaw cycles and polymer concentration to lend insight into the processes occurring during synthesis. These results suggest the presence of multiple mechanisms as causes for increasing hydrogel modulus with freeze-thaw cycling, including hydrogen bonding between amorphous and/or crystalline regions, and the formation of highly concentrated regions of mostly amorphous PVA chains. It is possible that the formation of regions with highly concentrated amounts of PVA increases the load-bearing ability of the hydrogels.