Your browser doesn't support javascript.
loading
Mostrar: 20 | 50 | 100
Resultados 1 - 4 de 4
Filtrar
Mais filtros

Base de dados
Tipo de documento
Intervalo de ano de publicação
1.
Opt Lett ; 46(3): 500-503, 2021 Feb 01.
Artigo em Inglês | MEDLINE | ID: mdl-33528394

RESUMO

Dispersion management is critical in many optical applications, whether to reduce impairments in fiber optic communication or chirp pulse amplification, or to create time stretch instruments for single-shot continuous recording of fast phenomena. The most common solutions for achieving large dispersion with low loss include dispersion compensation fiber, fiber Bragg grating, and diffraction grating pairs. Such dispersive elements have finite operational bandwidth, limited total dispersion, or insufficient power handling. In this Letter, we demonstrate a new, to the best of our knowledge, implementation of the chromo-modal dispersion device based on a silicon waveguide slab that addresses these limitations. The device provides extremely large dispersion with a widely tunable spectrum. We also propose a new time-stretch spectrometer where the absorption cell simultaneously provides spectrum-to-time mapping for fast single-shot spectroscopy.

2.
J Biomed Mater Res A ; 100(12): 3416-21, 2012 Dec.
Artigo em Inglês | MEDLINE | ID: mdl-22767395

RESUMO

Porous silicon nanoparticles (PSiNPs) are attractive carriers for targeted drug delivery in nanomedicine. For in vivo applications, the biodegradation property of PSiNPs provides a pathway for their safe clearance from the body. Particles sizes of 80-120 nm are of particular interest as they are important for cellular applications, such as drug delivery for cancer therapy, because these nanoparticles can take advantage of the enhanced permeability and retention effect to deliver drug preferentially to tumors with leaky vasculature, yet large enough to avoid renal clearance. However, the biodegradability rate of such particles is often too fast, which limits particle half-life and potentially reduces their in vivo delivery efficiency. In this work, we focus on the degradation of nanoscale particles and study the effect of both thermal oxidation and silica coating on the stability of PSiNPs in phosphate buffered saline solution (a close mimic of a basic biological fluid). Using thermal oxidation, the half-life of PSiNPs can be varied from 10 min up to 3 h. Using silica coating, the half-life can be extended further to 8 h. The particles produced using both these techniques can be functionalized using standard silica surface chemistries developed for applications in drug delivery.


Assuntos
Nanopartículas/química , Silício/química , Biodegradação Ambiental , Cinética , Nanopartículas/ultraestrutura , Oxirredução , Porosidade , Dióxido de Silício/química , Temperatura
3.
Opt Express ; 20(13): 14109-16, 2012 Jun 18.
Artigo em Inglês | MEDLINE | ID: mdl-22714475

RESUMO

High-throughput real-time optical integrators are of great importance for applications that require ultrafast optical information processing, such as real-time phase reconstruction of ultrashort optical pulses. In many of these applications, integration of wide optical bandwidth signals is required. Unfortunately, conventional all-optical integrators based on passive devices are usually sensitive to the wavelength and bandwidth of the optical carrier. Here, we propose and demonstrate a passive all-optical intensity integrator whose operation is independent of the optical signal wavelength and bandwidth. The integrator is implemented based on modal dispersion in a multimode waveguide. By controlling the launch conditions of the input beam, the device produces a rectangular temporal impulse response. Consequently, a temporal intensity integration of an arbitrary optical waveform input is performed within the rectangular time window. The key advantage of this device is that the integration operation can be performed independent of the input signal wavelength and optical carrier bandwidth. This is preferred in many applications where optical signals of different wavelengths are involved. Moreover, thanks to the use of a relatively short length of multimode waveguide, lower system latency is achieved compared to the systems using long dispersive fibers. To illustrate the versatility of the optical integrator, we demonstrate temporal intensity integration of optical waveforms with different wavelengths and optical carrier bandwidths. Finally, we use this device to perform high-throughput, single-shot, real-time optical phase reconstruction of phase-modulated signals at telecommunications bit rates.


Assuntos
Dispositivos Ópticos , Processamento de Sinais Assistido por Computador/instrumentação , Telecomunicações/instrumentação , Sistemas Computacionais , Desenho Assistido por Computador , Desenho de Equipamento , Análise de Falha de Equipamento
4.
Opt Express ; 19(24): 23809-17, 2011 Nov 21.
Artigo em Inglês | MEDLINE | ID: mdl-22109406

RESUMO

The ability to control chromatic dispersion is paramount in applications where the optical pulsewidth is critical, such as chirped pulse amplification and fiber optic communications. Typically, devices used to generate large amounts (>100 ps/nm) of chromatic dispersion are based on diffraction gratings, chirped fiber Bragg gratings, or dispersion compensating fiber. Unfortunately, these dispersive elements suffer from one or more of the following restrictions: (i) limited operational bandwidth, (ii) limited total dispersion, (iii) low peak power handling, or (iv) large spatial footprint. Here, we introduce a new type of tunable dispersive device, which overcomes these limitations by leveraging the large modal dispersion of a multimode waveguide in combination with the angular dispersion of diffraction gratings to create chromatic dispersion. We characterize the device's dispersion, and demonstrate its ability to stretch a sub-picosecond optical pulse to nearly 2 nanoseconds in 20 meters of multimode optical fiber. Using this device, we also demonstrate single-shot, time-wavelength atomic absorption spectroscopy at a repetition rate of 90.8 MHz.


Assuntos
Tecnologia de Fibra Óptica/instrumentação , Refratometria/instrumentação , Ressonância de Plasmônio de Superfície/instrumentação , Cor , Desenho de Equipamento , Análise de Falha de Equipamento
SELEÇÃO DE REFERÊNCIAS
DETALHE DA PESQUISA