Fatty Acid Composition of Proximal Femur Bone Marrow Adipose Tissue in Subjects With Systemic Lupus Erythematous Using 3 T Magnetic Resonance Spectroscopy.

BACKGROUND: Systemic lupus erythematosus (SLE) is a chronic, inflammatory disease with common musculoskeletal manifestations, notably reductions in bone quality. Bone marrow adipose tissue composition and quantity has been previously linked to bone quality and may play a role in SLE pathophysiology but has not been thoroughly studied. PURPOSE: To use magnetic resonance spectroscopy (MRS) to investigate bone marrow adipose tissue quantity and composition in proximal femur subregions of untreated SLE patients compared to controls and treated patients. STUDY TYPE: Prospective. SUBJECTS: A total of 64 female subjects: 28 SLE, 15 glucocorticoid (GC)-treated SLE and 21 matched controls. FIELD STRENGTH/SEQUENCE: Stimulated echo acquisition mode (STEAM) sequence at 3 T. ASSESSMENT: MRS was performed at multiple echo times in the femoral neck and trochanter regions and fatty acids (FA) composition was computed. STATISTICAL TESTS: Intergroup comparisons were carried out using ANOVA. A P value < 0.05 was considered statistically significant. RESULTS: SLE patients had significantly higher saturated FA compared to controls in both the femoral neck (+0.12) and trochanter (+0.11), significantly lower monounsaturated FA in the trochanter compared to controls (-0.05), and significantly lower polyunsaturated FA in the femoral neck compared to both controls (-0.07) and SLE patients on GC therapy (-0.05). DATA CONCLUSION: SLE patients have altered proximal femur marrow fat metabolism, which may reflect a manifestation of, or play a role in, the altered inflammatory response of these patients. EVIDENCE LEVEL: 2 TECHNICAL EFFICACY: Stage 2.

Analysis of muscle, hip, and subcutaneous fat in osteoporosis patients with varying degrees of fracture risk using 3T Chemical Shift Encoded MRI.

Osteoporosis (OP) is a major disease that affects 200 million people worldwide. Fatty acid metabolism plays an important role in bone health and plays an important role in bone quality and remodeling. Increased bone marrow fat quantity has been shown to be associated with a decrease in bone mineral density (BMD), which is used to predict fracture risk. Chemical-Shift Encoded magnetic resonance imaging (CSE-MRI) allows noninvasive and quantitative assessment of adipose tissues (AT). The aim of our study was to assess hip or proximal femoral bone marrow adipose tissue (BMAT), thigh muscle (MUS), and subcutaneous adipose tissue (SAT) in 128 OP subjects matched for age, BMD, weight and height with different degrees of fracture risk assessed through the FRAX score (low, moderate and high). Our results showed an increase in BMAT and in MUS in high compared to low fracture risk patients. We also assessed the relationship between fracture risk as assessed by FRAX and AT quantities. Overall, the results of this study suggest that assessment of adipose tissue via 3T CSE-MRI provides insight into the pathophysiology fracture risk by showing differences in the bone marrow and muscle fat content in subjects with similarly osteoporotic BMD as assessed by DXA, but with varying degrees of fracture risk as assessed by FRAX.

Artificial intelligence, osteoporosis and fragility fractures.

PURPOSE OF REVIEW: Artificial intelligence tools have found new applications in medical diagnosis. These tools have the potential to capture underlying trends and patterns, otherwise impossible with previous modeling capabilities. Machine learning and deep learning models have found a role in osteoporosis, both to model the risk of fragility fracture, and to help with the identification and segmentation of images. RECENT FINDINGS: Here we survey the latest research in the artificial intelligence application to the prediction of osteoporosis that has been published between January 2017 and March 2019. Around half of the articles that are covered here predict (by classification or regression) an indicator of osteoporosis, such as bone mass or fragility fractures; the other half of studies use tools for automatic segmentation of the images of patients with or at risk of osteoporosis. The data for these studies include diverse signal sources: acoustics, MRI, CT, and of course, X-rays. SUMMARY: New methods for automatic image segmentation, and prediction of fracture risk show promising clinical value. Though these recent developments have had a successful initial application to osteoporosis research, their development is still under improvement, such as accounting for positive/negative class bias. We urge care when reporting accuracy metrics, and when comparing such metrics between different studies.

A Novel MRI Tool for Evaluating Cortical Bone Thickness of the Proximal Femur.

BACKGROUND: Osteoporotic hip fractures heavily cost the health care system. Clinicians and patients can benefit from improved tools to assess bone health. Herein, we aim to develop a three-dimensional magnetic resonance imaging (MRI) method to assess cortical bone thickness and assess the ability of the method to detect regional changes in the proximal femur. METHODS: Eighty-nine patients underwent hip magnetic resonance imaging. FireVoxel and 3DSlicer were used to generate three-dimensional proximal femur models. ParaView was used to define five regions: head, neck, greater trochanter, intertrochanteric region, and subtrochanteric region. Custom software was used to calculate the cortical bone thickness and generate a color map of the proximal femur. Mean cortical thickness values for each region were calculated. Statistical t-tests were performed to evaluate differences in cortical thickness based on proximal femur region. Measurement reliability was evaluated using coefficient of variation, intraclass correlation coefficients, and overlap metrics. RESULTS: Three-dimensional regional cortical thickness maps for all subjects were generated. The subtrochanteric region was found to have the thickest cortical bone and the femoral head had the thinnest cortical bone. There were statistically significant differences between regions (p < 0.01) for all possible comparisons. CONCLUSIONS: Cortical bone is an important contributor to bone strength, and its thinning results in increased hip fracture risk. We describe the development and measurement reproducibility of an MRI tool permitting assessment of proximal femur cortical thickness. This study represents an important step toward longitudinal clinical trials interested in monitoring the effectiveness of drug therapy on proximal femur cortical thickness.

Influence of bone lesion location on femoral bone strength assessed by MRI-based finite-element modeling.

Currently, clinical determination of pathologic fracture risk in the hip is conducted using measures of defect size and shape in the stance loading condition. However, these measures often do not consider how changing lesion locations or how various loading conditions impact bone strength. The goal of this study was to determine the impact of defect location on bone strength parameters in both the sideways fall and stance-loading conditions. We recruited 20 female subjects aged 48-77 years for this study and performed MRI of the proximal femur. Using these images, we simulated 10-mm pathologic defects in greater trochanter, superior, middle, and inferior femoral head, superior, middle, and inferior femoral neck, and lateral, middle, and medial proximal diaphysis to determine the effect of defect location on change in bone strength by performing finite element analysis. We compared the effect of each osteolytic lesion on bone stiffness, strength, resilience, and toughness. For the sideways fall loading, defects in the inferior femoral head (12.21%) and in the greater trochanter (6.43%) resulted in the greatest overall reduction in bone strength. For the stance loading, defects in the mid femoral head (-7.91%) and superior femoral head (-7.82%) resulted in the greatest overall reduction in bone strength. Changes in stiffness, yield force, ultimate force, resilience, and toughness were not found to be significantly correlated between the sideways fall and stance-loading for the majority of defect locations, suggesting that calculations based on the stance-loading condition are not predictive of the change in bone strength experienced in the sideways fall condition. While stiffness was significantly related to yield force (R2 > 0.82), overall force (R2 > 0.59), and resilience (R2 > 0.55), in both, the stance-loading and sideways fall conditions for most defect locations, stiffness was not significantly related to toughness. Therefore, structure-dependent measure such as stiffness may not fully explain the post-yield measures, which depend on material failure properties. The data showed that MRI-based models have the sensitivity to determine the effect of pathologic lesions on bone strength.

3T chemical shift-encoded MRI: Detection of altered proximal femur marrow adipose tissue composition in glucocorticoid users and validation with magnetic resonance spectroscopy.

BACKGROUND: Osteoporosis (OP) results in weak bone and can ultimately lead to fracture. Drugs such as glucocorticoids can also induce OP (glucocorticoid-induced osteoporosis [GIO]). Bone marrow adipose tissue composition and quantity may play a role in OP pathophysiology, but has not been thoroughly studied in GIO compared to primary OP. PURPOSE/HYPOTHESIS: Chemical shift-encoded (CSE) MRI allows detection of subregional differences in bone marrow adipose tissue composition and quantity in the proximal femur of GIO compared to OP subjects and has high agreement with the reference standard of magnetic resonance spectroscopy (MRS). STUDY TYPE: Prospective. SUBJECTS: In all, 18 OP and 13 GIO subjects. FIELDS STRENGTH: 3T. SEQUENCE: Multiple gradient-echo, stimulated echo acquisition mode (STEAM). ASSESSMENT: Subjects underwent CSE-MRI in the proximal femurs, and for each parametric map regions of interest (ROIs) were assessed in the femoral head (fHEAD), femoral neck (fNECK), Ward's triangle (fTRIANGLE), and the greater trochanter (GTROCH). In addition, we compared CSE-MRI against the reference standard of MRS performed in the femoral neck and Ward's triangle. STATISTICAL TESTS: Differences between OP/GIO were investigated using the Mann-Whitney nonparametric test. Bland-Altman methodology was used to assess measurement agreement between CSE-MRI and MRS. RESULTS: GIO compared with OP subjects demonstrated: decreased monounsaturated fat fraction (MUFA) (-2.1%, P < 0.05) in fHEAD; decreased MUFA (-3.8%, P < 0.05), increased saturated fat fraction (SFA) (5.5%, P < 0.05), and decreased T2* (-3.8 msec, P < 0.05) in fNECK; decreased proton density fat fraction (PDFF) (-15.1%, P < 0.05), MUFA (-9.8%, P < 0.05), polyunsaturated fat fraction (PUFA) (-1.8%, P < 0.01), increased SFA (11.6%, P < 0.05), and decreased T2* (-5.4 msec, P < 0.05) in fTRIANGLE; and decreased T2* (-1.5 msec, P < 0.05) in GTROCH. There was high measurement agreement between MRI and MRS using the Bland-Altman test. DATA CONCLUSION: 3T CSE-MRI may allow reliable assessment of subregional bone marrow adipose tissue (bMAT) quantity and composition in the proximal femur in a clinically reasonable scan time. Glucocorticoids may alter the lipid profile of bMAT and potentially result in reduced bone quality. LEVEL OF EVIDENCE: 2 Technical Efficacy: Stage 2 J. Magn. Reson. Imaging 2019;50:490-496.

Artificial Intelligence Applied to Osteoporosis: A Performance Comparison of Machine Learning Algorithms in Predicting Fragility Fractures From MRI Data.

BACKGROUND: A current challenge in osteoporosis is identifying patients at risk of bone fracture. PURPOSE: To identify the machine learning classifiers that predict best osteoporotic bone fractures and, from the data, to highlight the imaging features and the anatomical regions that contribute most to prediction performance. STUDY TYPE: Prospective (cross-sectional) case-control study. POPULATION: Thirty-two women with prior fragility bone fractures, of mean age = 61.6 and body mass index (BMI) = 22.7 kg/m2 , and 60 women without fractures, of mean age = 62.3 and BMI = 21.4 kg/m2 . Field Strength/ Sequence: 3D FLASH at 3T. ASSESSMENT: Quantitative MRI outcomes by software algorithms. Mechanical and topological microstructural parameters of the trabecular bone were calculated for five femoral regions, and added to the vector of features together with bone mineral density measurement, fracture risk assessment tool (FRAX) score, and personal characteristics such as age, weight, and height. We fitted 15 classifiers using 200 randomized cross-validation datasets. Statistical Tests: Data: Kolmogorov-Smirnov test for normality. Model Performance: sensitivity, specificity, precision, accuracy, F1-test, receiver operating characteristic curve (ROC). Two-sided t-test, with P < 0.05 for statistical significance. RESULTS: The top three performing classifiers are RUS-boosted trees (in particular, performing best with head data, F1 = 0.64 ± 0.03), the logistic regression and the linear discriminant (both best with trochanteric datasets, F1 = 0.65 ± 0.03 and F1 = 0.67 ± 0.03, respectively). A permutation of these classifiers comprised the best three performers for four out of five anatomical datasets. After averaging across all the anatomical datasets, the score for the best performer, the boosted trees, was F1 = 0.63 ± 0.03 for All-features dataset, F1 = 0.52 ± 0.05 for the no-MRI dataset, and F1 = 0.48 ± 0.06 for the no-FRAX dataset. Data Conclusion: Of many classifiers, the RUS-boosted trees, the logistic regression, and the linear discriminant are best for predicting osteoporotic fracture. Both MRI and FRAX independently add value in identifying osteoporotic fractures. The femoral head, greater trochanter, and inter-trochanter anatomical regions within the proximal femur yielded better F1-scores for the best three classifiers. LEVEL OF EVIDENCE: 2 Technical Efficacy: Stage 2 J. Magn. Reson. Imaging 2019;49:1029-1038.

Segmentation of the Proximal Femur from MR Images using Deep Convolutional Neural Networks.

Magnetic resonance imaging (MRI) has been proposed as a complimentary method to measure bone quality and assess fracture risk. However, manual segmentation of MR images of bone is time-consuming, limiting the use of MRI measurements in the clinical practice. The purpose of this paper is to present an automatic proximal femur segmentation method that is based on deep convolutional neural networks (CNNs). This study had institutional review board approval and written informed consent was obtained from all subjects. A dataset of volumetric structural MR images of the proximal femur from 86 subjects were manually-segmented by an expert. We performed experiments by training two different CNN architectures with multiple number of initial feature maps, layers and dilation rates, and tested their segmentation performance against the gold standard of manual segmentations using four-fold cross-validation. Automatic segmentation of the proximal femur using CNNs achieved a high dice similarity score of 0.95 ± 0.02 with precision = 0.95 ± 0.02, and recall = 0.95 ± 0.03. The high segmentation accuracy provided by CNNs has the potential to help bring the use of structural MRI measurements of bone quality into clinical practice for management of osteoporosis.

Chemical shift-encoded MRI for assessment of bone marrow adipose tissue fat composition: Pilot study in premenopausal versus postmenopausal women.

OBJECT: To quantify and compare subregional proximal femur bone marrow fat composition in premenopausal and postmenopausal women using chemical shift-encoded-MRI (CSE-MRI). MATERIALS AND METHODS: A multi gradient-echo sequence at 3 T was used to scan both hips of premenopausal (n = 9) and postmenopausal (n = 18) women. Subregional fat composition (saturation, poly-unsaturation, mono-unsaturation) was quantitatively assessed in the femoral head, femoral neck, Ward's triangle, greater trochanter, and proximal shaft in bone marrow adipose tissue and separately within red and yellow marrow adipose tissue. RESULTS: Significant differences in fat composition in postmenopausal compared to premenopausal women, which varied depending on the subregion analyzed, were found. Within both whole and yellow marrow adipose tissue, postmenopausal women demonstrated higher saturation (+14.7% to +43.3%), lower mono- (-11.4% to -33%) and polyunsaturation (-52 to -83%) (p < 0.05). Within red marrow adipose tissue, postmenopausal women demonstrated lower fat quantity (-16% to -24%) and decreased polyunsaturation (-80 to -120%) in the femoral neck, greater trochanter, and Ward's triangle (p < 0.05). CONCLUSION: CSE-MRI can be used to detect subregional differences in proximal femur marrow adipose tissue composition between pre- and post-menopausal women in clinically feasible scan times.

3-T MR Imaging of Proximal Femur Microarchitecture in Subjects with and without Fragility Fracture and Nonosteoporotic Proximal Femur Bone Mineral Density.

Purpose To determine if 3-T magnetic resonance (MR) imaging of proximal femur microarchitecture can allow discrimination of subjects with and without fragility fracture who do not have osteoporotic proximal femur bone mineral density (BMD). Materials and Methods Sixty postmenopausal women (30 with and 30 without fragility fracture) who had BMD T scores of greater than -2.5 in the hip were recruited. All subjects underwent dual-energy x-ray absorptiometry to assess BMD and 3-T MR imaging of the same hip to assess bone microarchitecture. World Health Organization Fracture Risk Assessment Tool (FRAX) scores were also computed. We used the Mann-Whitney test, receiver operating characteristics analyses, and Spearman correlation estimates to assess differences between groups, discriminatory ability with parameters, and correlations among BMD, microarchitecture, and FRAX scores. Results Patients with versus without fracture showed a lower trabecular plate-to-rod ratio (median, 2.41 vs 4.53, respectively), lower trabecular plate width (0.556 mm vs 0.630 mm, respectively), and lower trabecular thickness (0.114 mm vs 0.126 mm) within the femoral neck, and higher trabecular rod disruption (43.5 vs 19.0, respectively), higher trabecular separation (0.378 mm vs 0.323 mm, respectively), and lower trabecular number (0.158 vs 0.192, respectively), lower trabecular connectivity (0.015 vs 0.027, respectively) and lower trabecular plate-to-rod ratio (6.38 vs 8.09, respectively) in the greater trochanter (P < .05 for all). Trabecular plate-to-rod ratio, plate width, and thickness within the femoral neck (areas under the curve [AUCs], 0.654-0.683) and trabecular rod disruption, number, connectivity, plate-to-rod ratio, and separation within the greater trochanter (AUCs, 0.662-0.694) allowed discrimination of patients with fracture from control subjects. Femoral neck, total hip, and spine BMD did not differ between and did not allow discrimination between groups. FRAX scores including and not including BMD allowed discrimination between groups (AUCs, 0.681-0.773). Two-factor models (one MR imaging microarchitectural parameter plus a FRAX score without BMD) allowed discrimination between groups (AUCs, 0.702-0.806). There were no linear correlations between BMD and microarchitectural parameters (Spearman ρ, -0.198 to 0.196). Conclusion 3-T MR imaging of proximal femur microarchitecture allows discrimination between subjects with and without fragility fracture who have BMD T scores of greater than -2.5 and may provide different information about bone quality than that provided by dual-energy x-ray absorptiometry. © RSNA, 2018.

Subchondral bone microarchitecture analysis in the proximal tibia at 7-T MRI.

Background Bone remodels in response to mechanical loads and osteoporosis results from impaired ability of bone to remodel. Bone microarchitecture analysis provides information on bone quality beyond bone mineral density (BMD). Purpose To compare subchondral bone microarchitecture parameters in the medial and lateral tibia plateau in individuals with and without fragility fractures. Material and Methods Twelve female patients (mean age = 58 ± 15 years; six with and six without previous fragility fractures) were examined with dual-energy X-ray absorptiometry (DXA) and 7-T magnetic resonance imaging (MRI) of the proximal tibia. A transverse high-resolution three-dimensional fast low-angle shot sequence was acquired (0.234 × 0.234 × 1 mm). Digital topological analysis (DTA) was applied to the medial and lateral subchondral bone of the proximal tibia. The following DTA-based bone microarchitecture parameters were assessed: apparent bone volume; trabecular thickness; profile-edge-density (trabecular bone erosion parameter); profile-interior-density (intact trabecular rods parameter); plate-to-rod ratio; and erosion index. We compared femoral neck T-scores and bone microarchitecture parameters between patients with and without fragility fracture. Results There was no statistical significant difference in femoral neck T-scores between individuals with and without fracture (-2.4 ± 0.9 vs. -1.8 ± 0.7, P = 0.282). Apparent bone volume in the medial compartment was lower in patients with previous fragility fracture (0.295 ± 0.022 vs. 0.317 ± 0.009; P = 0.016). Profile-edge-density, a trabecular bone erosion parameter, was higher in patients with previous fragility fracture in the medial (0.008 ± 0.003 vs. 0.005 ± 0.001) and lateral compartment (0.008 ± 0.002 vs. 0.005 ± 0.001); both P = 0.025. Other DTA parameters did not differ between groups. Conclusion 7-T MRI and DTA permit detection of subtle changes in subchondral bone quality when differences in BMD are not evident.

Cost-effectiveness of Virtual Bone Strength Testing in Osteoporosis Screening Programs for Postmenopausal Women in the United States.

Purpose To investigate whether assessment of bone strength with quantitative computed tomography (CT) in combination with dual-energy x-ray absorptiometry (DXA) is cost-effective as a screening tool for osteoporosis in postmenopausal women. Materials and Methods A state-transition microsimulation model of osteoporosis for postmenopausal women aged 55 years or older was developed with a lifetime horizon and U.S. societal perspective. All model inputs were derived from published literature. Three strategies were compared: no screening, DXA with T score-dependent rescreening intervals, and a combination of DXA and quantitative CT with different intervals (3, 5, and 10 years) at different screening initiation ages (55-65 years). Oral bisphosphonate therapy was started if DXA hip T scores were less than or equal to -2.5, 10-year risk for hip fracture was greater than 3% (World Health Organization Fracture Risk Assessment Tool score, or FRAX), 10-year risk for major osteoporotic fracture was greater than 20% (FRAX), quantitative CT femur bone strength was less than 3000 N, or occurrence of first fracture (eg, hip, vertebral body, wrist). Outcome measures were incremental cost-effectiveness ratios (ICERs) in 2015 U.S. dollars per quality-adjusted life year (QALY) gained and number of fragility fractures. Probabilistic sensitivity analysis was also performed. Results The most cost-effective strategy was combined DXA and quantitative CT screening starting at age 55 with quantitative CT screening every 5 years (ICER, $2000 per QALY). With this strategy, 12.8% of postmenopausal women sustained hip fractures in their remaining life (no screening, 18.7%; DXA screening, 15.8%). The corresponding percentages of vertebral fractures for DXA and quantitative CT with a 5-year interval, was 7.5%; no screening, 11.1%; DXA screening, 9%; for wrist fractures, 14%, 17.8%, and 16.4%, respectively; for other fractures, 22.6%, 30.8%, and 27.3%, respectively. In probabilistic sensitivity analysis, DXA and quantitative CT at age 55 years with quantitative CT screening every 5 years was the best strategy in more than 90% of all 1000 simulations (for thresholds of $50 000 per QALY and $100 000 per QALY). Conclusion Combined assessment of bone strength and bone mineral density is a cost-effective strategy for osteoporosis screening in postmenopausal women and has the potential to prevent a substantial number of fragility fractures. © RSNA, 2017 Online supplemental material is available for this article.

MRI assessment of bone structure and microarchitecture.

Osteoporosis is a disease of weak bone and increased fracture risk caused by low bone mass and microarchitectural deterioration of bone tissue. The standard-of-care test used to diagnose osteoporosis, dual-energy x-ray absorptiometry (DXA) estimation of areal bone mineral density (BMD), has limitations as a tool to identify patients at risk for fracture and as a tool to monitor therapy response. Magnetic resonance imaging (MRI) assessment of bone structure and microarchitecture has been proposed as another method to assess bone quality and fracture risk in vivo. MRI is advantageous because it is noninvasive, does not require ionizing radiation, and can evaluate both cortical and trabecular bone. In this review article, we summarize and discuss research progress on MRI of bone structure and microarchitecture over the last decade, focusing on in vivo translational studies. Single-center, in vivo studies have provided some evidence for the added value of MRI as a biomarker of fracture risk or treatment response. Larger, prospective, multicenter studies are needed in the future to validate the results of these initial translational studies. LEVEL OF EVIDENCE: 5 Technical Efficacy: Stage 5 J. MAGN. RESON. IMAGING 2017;46:323-337.

7T MRI of distal radius trabecular bone microarchitecture: How trabecular bone quality varies depending on distance from end-of-bone.

PURPOSE: To use 7T magnetic resonance imaging (MRI) to determine how trabecular bone microarchitecture varies at the epiphysis, metaphysis, and diaphysis of the distal radius. MATERIALS AND METHODS: The distal radius of 24 females (mean age = 56 years, range = 24-78 years) was scanned on a 7T MRI using a 3D fast low-angle shot sequence (0.169 × 0.169 × 1 mm). Digital topological analysis was applied at the epiphysis, metaphysis, and diaphysis to compute: total trabecular bone volume; trabecular thickness, number, connectivity, and erosion index (a measure of network resorption). Differences and correlations were assessed using standard statistical methods. RESULTS: The metaphysis and epiphysis had 83-123% greater total bone volume and 14-16% greater trabecular number than the diaphysis (both P < 0.0001). The erosion index was significantly higher at the diaphysis than the metaphysis and epiphysis (both P < 0.01). The most elderly volunteers had lower trabecular number (<66 years mean 0.29 ± 0.01; ≥66 years, 0.27 ± 0.02, P < 0.05) and higher erosion index (<66 years mean 1.18 ± 0.17; age ≥66 years, mean 1.42 ± 0.46, P < 0.05) at the epiphysis; differences not detected by total trabecular bone volume. CONCLUSION: 7T MRI reveals trabecular bone microarchitecture varies depending on scan location at the end-of-bone, being of overall higher quality distally (epiphysis) than proximally (diaphysis). Age-related differences in trabecular microarchitecture can be detected by 7T MRI. The results highlight the potential sensitivity of 7T MRI to microarchitectural differences and the potential importance of standardizing scan location for future clinical studies of fracture risk or treatment response. LEVEL OF EVIDENCE: 3 J. Magn. Reson. Imaging 2017;45:872-878.

Patient-specific Hip Fracture Strength Assessment with Microstructural MR Imaging-based Finite Element Modeling.

Purpose To describe a nonlinear finite element analysis method by using magnetic resonance (MR) images for the assessment of the mechanical competence of the hip and to demonstrate the reproducibility of the tool. Materials and Methods This prospective study received institutional review board approval and fully complied with HIPAA regulations for patient data. Written informed consent was obtained from all subjects. A nonlinear finite element analysis method was developed to estimate mechanical parameters that relate to hip fracture resistance by using MR images. Twenty-three women (mean age ± standard deviation, 61.7 years ± 13.8) were recruited from a single osteoporosis center. To thoroughly assess the reproducibility of the finite element method, three separate analyses were performed: a test-retest reproducibility analysis, where each of the first 13 subjects underwent MR imaging on three separate occasions to determine longitudinal variability, and an intra- and interoperator reproducibility analysis, where a single examination was performed in each of the next 10 subjects and four operators independently performed the analysis two times in each of the subjects. Reproducibility of parameters that reflect fracture resistance was assessed by using the intraclass correlation coefficient and the coefficient of variation. Results For test-retest reproducibility analysis and inter- and intraoperator analyses for proximal femur stiffness, yield strain, yield load, ultimate strain, ultimate load, resilience, and toughness in both stance and sideways-fall loading configurations each had an individual median coefficient of variation of less than 10%. Additionally, all measures had an intraclass correlation coefficient higher than 0.99. Conclusion This experiment demonstrates that the finite element analysis model can consistently and reliably provide fracture risk information on correctly segmented bone images. © RSNA, 2016 Online supplemental material is available for this article.

Novel association between bone mineral density scores and the prevalence of peripheral artery disease in both sexes.

The purpose of the current study was to investigate the association between bone mineral density (BMD) scores and the prevalence of peripheral artery disease (PAD) in a large cohort of subjects who underwent arterial Doppler assessments and calcaneal bone densitometry. The study was performed using data obtained from Life Line Screening Inc. Subjects were self-selected and paid for screening tests. The prevalence of PAD was significantly higher in men with osteopenia (4.5%) and osteoporosis (10.9%) compared to men with normal BMD (3.0%) ( p<0.001). Osteopenia (odds ratio (OR) 1.3) and osteoporosis (OR 2.3) were found to be independent risk factors for the presence of PAD in men. The prevalence of PAD was significantly higher in women with osteopenia (4.8%) and osteoporosis (11.8%) compared to women with normal BMD (3.3%) ( p<0.001). Osteopenia (OR 1.15) and osteoporosis (OR 1.8) were found to be independent risk factors for the presence of PAD in women. The current study reports a strong association of abnormal BMD analysis with the prevalence of PAD, which persists even when controlling for age and associated atherosclerotic risk factors. Although the mechanism by which these two disease processes is related is not completely elucidated, the presence of osteoporosis should make clinicians aware of the possibility of occult PAD or associated atherosclerotic disease in appropriate patients.

Transient osteoporosis: Not just the hip to worry about.

Transient osteoporosis (TO) is a clinical syndrome characterized by joint pain and the presence of bone marrow edema on magnetic resonance imaging (MRI), both of which spontaneously resolve over time. Transient osteoporosis most commonly affects the hip, but also may involve other lower extremity sites. TO likely represents a disorder that may be monoarticular or "migratory" with involvement of two or more lower extremity sites sequentially affected over a number of months. We report on two cases of transient osteoporosis, one involving the knee and one involving the hip, demonstrating the utility of serial bone mineral density measurements at both sites. Additionally, we are able to report on the microarchitectural changes seen at the distal femur on ultra-high resolution (7 T) MRI. Case #1 describes a recurrence of transient osteoporosis of the hip three years after a similar presentation at the contralateral hip and highlights the findings of rapidly changing bone mineral density in this clinical syndrome. In contrast to the spine, hip and forearm, peripheral bone density measurements at the knee are rarely reported and to our knowledge Case #2 represents the first report of transient osteoporosis of the knee demonstrating bone density findings similar to that seen in the hip. We postulate that transient osteoporosis of the knee is part of a clinical spectrum most commonly seen in the hip and one that is marked by lower extremity joint pain, bone marrow edema on MRI and transient decreases in bone mineral density all of which spontaneously resolve without sequelae.

The NYU Osteoporosis Model of Care Experience.

INTRODUCTION: Participants who sustain a fragility fracture are at increased risk for subsequent fractures. Despite the consequences of recurrent fractures, bone mineral density (BMD) testing and treatment rates for osteoporosis after a fracture remain low. The New York University (NYU) Langone Osteoporosis Model of Care was developed to identify women at increased risk for recurrent fractures and to reduce the rates of subsequent fracture through patient and physician education. METHODS: Women aged 50 years and older who had a fracture and received their care at NYU affiliated hospitals were contacted via mail after discharge. Participants were provided educational materials explaining decreased bone strength and its possible relationship to their fracture and were asked to complete a questionnaire. One year postfracture, participants were sent follow-up questionnaires requesting their most recent fracture treatment and BMD information. Educational material was also provided to the treating orthopedic surgeons. RESULTS: Overall, 524 patients were contacted and 210 (40%) enrolled. By the end of 24 months, 92 participants completed their 1-year questionnaire (44% of the enrollees). Forty-two (46%) participants had undergone new BMD testing and 37 (40%) were receiving antiresorptive medications, including 6 (6%) who had not been prescribed these medications before enrolling in the program. CONCLUSIONS: The Osteoporosis Model of Care is a simple and cost-effective educational program, which improved comprehensive fracture care in an actual clinical setting. Patient enrollment remains a challenge in implementing the program. Our program highlights difficulties in providing community-dwelling participants with appropriate postfracture care. With increasing concern among the public regarding the use of bone strengthening medications and continued low postfracture treatment rates, educating patients with high fracture risk is critical to reducing the rate of subsequent fracture. Our Model of Care Program demonstrates both the success and limitations of a postfracture educational approach using discharge diagnosis data to identify patients with fracture.

3 Tesla MRI detects deterioration in proximal femur microarchitecture and strength in long-term glucocorticoid users compared with controls.

BACKGROUND: Glucocorticoid-induced osteoporosis (GIO) is the most common secondary form of osteoporosis, and glucocorticoid users are at increased risk for fracture compared with nonusers. There is no established relationship between bone mineral density (BMD) and fracture risk in GIO. We used 3 Tesla (T) MRI to investigate how proximal femur microarchitecture is altered in subjects with GIO. METHODS: This study had institutional review board approval. We recruited 6 subjects with long-term (> 1 year) glucocorticoid use (median age = 52.5 (39.2-58.7) years) and 6 controls (median age = 65.5 [62-75.5] years). For the nondominant hip, all subjects underwent dual-energy x-ray absorptiometry (DXA) to assess BMD and 3T magnetic resonance imaging (MRI, 3D FLASH) to assess metrics of bone microarchitecture and strength. RESULTS: Compared with controls, glucocorticoid users demonstrated lower femoral neck trabecular number (-50.3%, 1.12 [0.84-1.54] mm(-1) versus 2.27 [1.88-2.73] mm(-1) , P = 0.02), plate-to-rod ratio (-20.1%, 1.48 [1.39-1.71] versus 1.86 [1.76-2.20], P = 0.03), and elastic modulus (-64.8% to -74.8%, 1.54 [1.22-3.19] GPa to 2.31 [1.87-4.44] GPa versus 6.15 [5.00-7.09] GPa to 6.59 [5.58-7.31] GPa, P < 0.05), and higher femoral neck trabecular separation (+192%, 0.705 [0.462-1.00] mm versus 0.241 [0.194-0.327] mm, P = 0.02). There were no differences in femoral neck trabecular thickness (-2.7%, 0.193 [0.184-0.217] mm versus 0.199 [0.179-0.210] mm, P = 0.94) or femoral neck BMD T-scores (+20.7%, -2.1 [-2.8 to -1.4] versus -2.6 [-3.3 to -2.5], P = 0.24) between groups. CONCLUSION: The 3T MRI can potentially detect detrimental changes in proximal femur microarchitecture and strength in long-term glucocorticoid users.